Military Engineer Services Tender

Sofa set 5 seater with cusion (FD-373) All as shown on drawing.All wood shall be of first class HW Teak wood. Cushion for seat & back shall be 100mm thick PU foam 40 density covered with good quailty, tapestry cloth.Tapestry as per sample kept at BSO Yard. PVC shoe shall be provided to each legs.All wooden portions shall be smoothened to apply best quality water base PU polish glossy finish .Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

Table Bed side MAP (FD/E6/MAP/15 R) The complete frame work shall be made of CRCA box section with 18 guage . Side top/Bottom rail of size 18 mm x 18 mm x 18 G shall be provided to frame. Sides/top/back/complete drawers except bottom shall be made with 18 mm thick Prelaminated particle Board BSL Exterior grade and bottom of drawer shall be made with 9 mm thick Prelaminated particle Board Exterior grade. Steel frame shall be two coats spray painting over a coat of primer . Table top shall be made of 18 mm thick Prelaminated particle Board exterior grade with 0.8 mm thick PVC edge-banding with auto-lipped through-feed. std quality Telescopic channel(Hettich/Ebco) shall be provided to drawers for smooth functiong in lieu of TW runner. 75 mm long SS handle shall be provided to each drawer as per sample kept withy BSO yard. Inner hard rubber shoe shall be provided to each legs. Rest all as per drg and as directed by EIC.

Table dinning 1200 x 900 (FD/MAP-II/03) All as shown on drawing. All wood work shall be of first class hard wood teak . Over all size of the Table shall be 1200 x 900 x 750 mm and only one stiffener in the center of table be provided as specified in drawings. Top of the table shall be provided with 18mm thick pre-laminated particle board exterior grade. TW bracket of 100 x100 x 35 mm shall be provided in all four corners and 150 x 30 x 5 mm thick MS right angle screwed with rail and leg for extra strength be provided. Nylon buffers shall be provided to the bottom of legs. All wooden surfaces shall be melamine polish with high glossy finish. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

Table writing (FD-275) All as shown on drawing.All wood shall be of first class HW Teak wood. Overall size shall be 1145mm long, 600mm wide and 760mm high.Irrespective of whatever is shown on drawing top short rail of size 25 x 50 mm shall be provided at the side of drawer joining both long rail. Pre-laminated particle board exterior grade 18 mm thick one side teak faces other side duly finished shall be provided as top with 0.8 mm thick PVC edge banding with auto lipped shall be provided all edges on the top and drawer and cabinet shutter also.Teak wood bearers of section 25mm x 20mm shall be provided between drawer and cabinet towards the front of drawer and cabinet and at the bottom of drawer. Sides and back of drawer shall be 12 mm thick teak wood planks. Bottom of the drawers and back of the box shall be of 12 mm thick plywood. Shutter for cabinet shall be fixed with two Nos EARL BIHARI Hinges/ Auto locking concealed hinges. One standard quality cam lock & magnetic catcher shall also be provided to the cabinet shutter. 100 mm long SS 'C' shape handle shall be provided as per sample kept with BSO Yard. Hard rubber shoes shall be provided at the bottom of the legs duly screwed. All wooden surfaces shall be melamine polish with high glossy finish. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.