Military Engineer Services Tender

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTH WORK" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34

Lump sum price worked out by the contractor for " ROAD/PATH/ CULVERT WORKS " as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38

Lump sum price worked out by the contractor for "AREA DRAINAGE WORKS" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL WORKS" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 41

Lump sum price worked out by the contractor for " COMPOUND WALL WORKS" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.43

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 44

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION WORKS" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 49

Lump sum price worked out by the contractor for "( AIR CONDITIONING AND AIR CURTAIN WORK" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 50

Lump sum price worked out by the contractor for " SUMMER APLIANCES AND HOT WATER WORKS" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 51

Lump sum price worked out by the contractor for "DG SET WORKS" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 52

Sch 'A' PART-XIV (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY Supply and fixing for 15 mm bore fancy type chromium plated bib taps with wall flange,screwed for iron pipe or CPVC pipes for brass ferrule and fixed complete all as specified and as directed. Make - Jaquar Cat part No. QQT-7037 or equivalent of any make specified in Appx 'C'.

Supply and fixing for 15 mm bore fancy type chromium plated angular stop cock, screwed for iron pipes or CPVC pipes or brass ferrule and fixed complete all as specified and as directed. Make - Jaquar Cat part No. QQT-7053 or equivalent of any make specified in Appx 'C'.

Supply and fixing for two way angle cock chromium plated fancy type 15 mm bore complete all as specified and as directed. Make - Jaquar Queen seies or equivalent of any make specified in Appx 'C'.

Supply and fixing for health faucet with 1200 mm long flexible mild steel tube 15 mm dia with wall hook complete all as specified and as directed. Make - Jaquar Queen series or equivalent of any make specified in Appx 'C'.

Supply and fixing central hole basin mixer regular spout with popup waste system wiyh 450 mm long braided and fixed complete all as specified and as directed. Make - Jaquar Queen series Cat part No.QQT-7167B or equivalent of any make specified in Appx 'C'.

Supply and fixing for CP wall mixer 2 in 1 system with central spout and connection for over head shower with divertor liver ISI marked complete all as specified and as directed. Make - Jaquar Queen series or equivalent of any make specified in Appx 'C'.

Supply and fixing for overhead shower 114x144mm of square shape single flow with rubit cleaning system ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and as directed. Make - Jaquar ESSCO series or technocommercial equivalent of any make specified in Appx 'C'.

Supply and fixing of 15 mm bore fancy type chromium plated pillar tapes swan neck tap with right hand operating knob and fixed complete all as specified and as directed. Make - Jaquar ESSCO series or equivalent of any make specified in Appx 'C'.

INTERNAL ELECTRIFICATION Supply and fixing load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 pole 200 Amps, 25 KA, busbars , neutral link, blanking plates complete with all accessories all as specified and as directed by Engineer-in-Charge. Note: Outgoing MCBs shall be measured and paid separately

Supply and fixing TV sockets complete with all accessories all as specified and as directed by Engineer-in-Charge.

Supply and fixing RJ 11 Gang with shutter (Telephone Jack) complete with all accessories all as specified and directed by Engineer-in-Charge

S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge. Make : Havells Cat part No LH EXACP7IN1W 020 or equivalent in Crompton/Philips

Supply & fixing LED lamp B22 base 10 W, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and as directed.

Supply & fixing LED batten suitble for indoor application 10 W, 2' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge

M & L for drawing 12 pair /multi core coated copper telephone cable including PVC conduit of size 20mm complete all as specified and as directed by Engr-in-Charge

SEWAGE DISPOSAL M&L for construction of RCC septic tank 50 users designed to carry sewage and sullage water, excavation in any type of starta, PCC 1:4:8 below foundation, RCC M-30 design mix in walls,base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth upto 3 meter conventional type complete all as specified and as directed.

M&L for Soakage wells having size 2.4 m dia, 3.00 m effective depth excavation, in any type of strata, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in cement mortar, cover slab with RCC M-25, interconnecting RCC pipes complete filled with brick bats complete all as specified and as directed.

COMPOUND WALL WORKS M&L Steel gate 7.50 mtr wide with RCC pillar ref TD CEJZ/TD/13 sheet 1/2 to 2/2 complete all as specified and as directed.

EXTERNAL WATER SUPPLY WORKS M&L for construction of stone masonry valve pit for sluice valve as per specified and as per drawing including plastering,PCC in foundation, excavation and earth work in any type of soil, MS sheet cover 3 mm thick sheet with locking arrangrment painted with two coats of anti corrosive paint over one coat of zinc chrome primer of 1250x1250x1000mm complete all as specified and as directed.

All as per Item No above but size of 600x600x600mm complete all as specified and as directed.

M&L for cutting of existing DI/CI pipe 350 dia line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessary excavaton and earthwork, dewatering etc, if any involved, complete all as specified and directed.

EXTERNAL ELECTRIFICATION WORKS Supply and fixing drop fuse unit explusion type for out door air break gang operatated switch suitable for current carrying capacity upto 100 Amp,single pole mounted on and including insulator and jumper for 11 KV working pressure fixed to and including MS Channel with nuts, bolts and washer etc., synthetic bounded fuse tube with line cap complete all as specified and as directed.

Supply, installation, testing and commissioning of LT panel board powder coated outdoor type double door shutter, made out of CRCA 3 mm thick outer and 1.6 mm thick for inner door confirming to IS 8623 with angle iron50x50x6mm out door, floor mounting type with closed bus bar, chamber and with aluminium bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-500A, digital voltemeter 0-500 Volts, CTs of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following work also includins provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc,. the bottom protion of enclouser shall be minimum 60 cm above ground level of legs of angle iron)

(a) Aluminium bus bar capacity 500 Amps for phase-R-Y-B 3 nos & one for neutral -01 (b) MCCB FP 250 Amp, 35 KA for incoming-01 No (I/C0 (c) MCCB FP 125 Amp 25 KA-01 No (O/G) (d)MCCB FP 100 Amp 25 KA-02 No (O/G) (e) MCB TPN 32 Amp 126 KA -03 Nos (O/G) (f) MCB SPN 20 Amp 10KA-06 Nos (O/G)

Supply and fixing LED street lihght fitting 45 Watt 230 V AC outdoor type with high pressure diecast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

M & L for bracket made out of GI tubing 40mm dia, light grade 1.5 mtr long including fixing with MS clamps-2 Nos made Out of 25 mm wide 3 mm thick flat iron with M.S nuts bolts 75 mm long 12mm dia - 4 Nos with flat washer (3mm thick) -02 No for each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc. complete all as specified and directed.

Supply & fix Hot Press Moulded SMC (Sheet moulding compound) Junction box of size 250x200x105mm Hinged (L) with 2 way connector mounted on epoxy insulators for looping of cable for 1 Phase and 1neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40mmx4mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fittinh if required at site and provisioning of 1.0 sqmm 3.0 core flexible PVC insulated copper cable from junction box to connector of street light, complete all as specified & directed.

Supply & fixing automatic street light switch of rating 3.0 kw in single phase using nature switch for mutomatic swithing "ON/OFF of street lighting based on lux level of natural light along with contactor rating single phase 20 Amp single pole, MCB 20 Amps single pole (1 Nos) with support terminals prewired with PVC insulated strand copper wire enlosed/housed in pole wall mounted enclosure made of rust proof, shock proof, termit proof & dust proof FR grade special moulded compound Junction Box complete all sepcified & directed.

S & F Cable route indicator of size 100mm dia embossed as LT round shaped 10 mm thick with marking of 1.1 KV, LT welded bolted on angle iron of 25x25 of 60cm length grouted in PCC (1:3:6) type C-2 using block size of 150x150x150mm embedded in ground including not exceeding earth work complete all as specified and directed.

S & F Cable route indicator of size 100mm dia embossed as HT round shaped 10 mm thick with marking of 11 KV, LT welded bolted on angle iron of 25x25 of 60cm length grouted in PCC (1:3:6) type C-2 using block size of 150x150x150mm embedded in ground including not exceeding earth work complete all as specified and directed.

Supply & fixing post top lantern light fitting 25 Watt LED type with IP-65 protection Black ABS plastic spigot, spum aluminium canopy, with opal diffuser and accessories complete all as specified and directed.

Supply & fixing LED bollard light fitting 10 Watt, with IP 65 protection inverted pyramid light LED bolard of make crompton cart No LBLA2-10CDL or requiavalant any other approved make of PS complete all as specified and directed.

AIR CONDITIONING AND AIR CURTAIN WORK Supply and fix digital Voltage stabilizer automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed.

SUMMER APLIANCES AND HOT WATER WORKS Supply & installed of desert cooler electric driven (single phase) three speed having nominal air flow capacity 4000 CuM/hrs with propeller ISI marked cooler fan motor copper winding single phase fitted with & having 3/4 Nos blade, submersible pump, Cooler body made out from 20 gauge mild steel galvanized iron sheet & water tnak made out of 18 SWG having capacity 40 Ltr minimum including three louvers with wood wool pad, fiexible PVC distribution pipes and 3 way junction and including Angle iron stand with suitable size cpmpletely all as specified and directed. NOTE : The quated rate shall includes fot eh following :- (a) Three speed swich ISI Marked rotary type for propeller fan and one way switch pum with separate control. The switches shall have marking off-Low-medium and high. (b) Float valve on water on water supply connection. (c) S& F Stop Cock for sutiable size before the float valve is deemed to include in the item rate. (d) PVC connection of suitable length from stop cock to float valve etc. (e) S & F for angle Iron Stand of suitable size.

Supply, installation and testing of refrigrators, electric diven (single phase), not less than 190/195 liters capacity of BEE 5 stars rated, frost free, double door with humditiy control and deodrizer, thughned glass shelves, stabilizer free operation, inverter technilogy compressor, rust resistance body, dul thermostste for refrigeretor & freezer, with cool pack, completely all as specified and directed (for Dental care)

S&F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of ± 2.5% and of capacity 2KVA complete all as specified and as directed.

S&F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity1 KVA. (for Deep frezzer) complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with glass line insulation tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated including all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

DG SET WORKS Supply installation testing and commissioning complete of manufacture or OEM static silent ( Sound Proof enclosre) Diesel Engine Driven Generating set capable of delivering 62.5 KVA water cooled, multiple cylinder. Alternator : 3 Phase, 415V, 0.8 PF, 50 Hz. 1st fill of lube Oil @ coolant. Battery, AVM pads std, Control panel with microprocessor controller including suitable rating of MCCB with Engine safeties and protection, residential silencer with KRM and RECD (Retrofetted emission control device). including PCC foundations as recommended by OEM all around for ease of movement with antivibration pads including all features to comply with latest CPCB guidelines including AMF Panel of suitable capacity with all necessary arrangments and comprising of following :-

(i) Engine ( prime Mover ) : Diesel Engine 1500 RPM, direct injection, multiple cylinders, four stroke confirming to ISO 9001 : 2015, water cooled naturally turbo charged capable of giving adequate BHP to drive alternator capable of delivering 62.5 KVA at outdoor atomospheric conditions at Jaislmer,24 volt (as per manufacturer recommendations) elect battry start complet with fully wheel all standard fittings/fixtures as per manufacturer and including suitable panle with techmeter lub oil temperature, starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and Engine protection system (Shut down, High water temperature, low lub oil, oil pressure over speed etc) fuel tank and first fill of lub oil and other consumables etc. (ii) ALTERNATOR : Brushless AC alternator, 3 phase, 415 colt, 4 wire rated for output of 62.5 KVA minimum power facgory 0.8 1500 RPM IP 23 Protection calss enclosure, insulation class 'H' salient pole, revolving field, single bearing automatic voltage regulator coupled through Direct/flexible coupled through flexible coupling with and to match the above engine. (iii) BASE FRAME : made out of structural steel as per manufactures recommended design/specification. (iv) ACOUSTIC ENCLOSURE : Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norm and poer coater after seven tank process, the enclosure shall b designed for reducing the sound level to 75 DB (A) at a distance , of 1 M at 75% load under field condition and of 70 DB at 3 M from Gen set when DG set is working at full load along with testing conformance, labeling certification etc as laid down in GSR No.371 (E) dt 17 May 2002. (v) Foundation/Plinth/Base : shall be provided as per manufacturers recommendation, however inimum 0.5m space should be available all around the set and height of plinth shall not be less than 0.3M (vi) Diesel storage tank of capacity adequate for storage of diesel for 12 hours operation of Gen set. (vii) MISC : Tool kit, operation and maintenance catalogue, spare part list overhauling manuals guarantee card etc shall be provided as per manufacturer tandard pratices and two year servicing og DG set is carried out by contractor including material complete all as specified and ditected. for storage of diesel for 12 hours operation of Gen Set.

MEDICAL GAS SUPPLY SYSTEM WORKS Supply, Instllation testing and commissiong of Copper Piping with complete fittings/fixture as per technical specification and BS : 13348 and as mentioned Below :- (a) Installation of piping should be carried out as per approved medical standards with utmost cleanliness. (b) Only pipes, fittings and valves which have been degreased as per approved medical standards should be used. (c) Pipe fixing clamps for upto 42mm diameter. (d) Pipes should be non ferrous suitable for the diameter of the pipe and wherever required rigid metallic hanging or cemented supports to be used complete all as specified and directed. (i) 28 mm OD x 0.9 mm thick

(ii) 15 mm OD x 0.9 mm thick

(iii) 12 mm OD x 0.7 mm thick

Supply, installation, testing and commissioning of outlet complete with matching probe/adopter with end suitable for Hose & other end suitable for terminal units complete set for Oxygen, Air & Vacuum system as per technical specification confirming to CE certified/HTM 02-01/EN/ISO/DIN complete all as specified and directed. (a) For oxigen wall mounted type incl box and necessary fitting arrangements

(b) For compressed air 4 bar wall mounted type incl box and necessary fitting arrangements

(c) For vaccum wall mounted type incl box and necessary fitting arrangements

Supply installation, testing and commissioning of oxygen Back pressure compensated flow meter with control range of 0-15 Ipm (calibration within +/- 10%) with 250 ml humidifer bottle made of undreakble polycarbonte meterial and autoclavable at 121 degree Centigrade temperature. The flow meter shall be strict precision, durability standard and shall be made of brass chrome plated materials. TheThe flow tube shall have large and expanded 0-5 Ipm range for improved readability at low flows with Inlet filter of stainless steel wire mesh to prevent entry of foreign particles. The humidifier should have an integrated relief valve. Make LMPL complete all as specified and directed.

Supply, installation, testing and commissioning of front insertion type Oxygen Outlet with SS probe with other connected accessories, complete all specified and directed. Make LMPL/BSI/SSS

Supply, installation, testing and commissioning of Intergated / Combined alarm- valve box as per DIN EN ISO 7396-1 of HTM 02-01. The alarm panel shall be enclosed in a steel decorative fram powder coated duly powder coated and shall be designed to accept an electrical input range of 120-240 aolts aC -50-60 hertz. The source voltage shall be stepped down with a self-contained transformer. The panel shall contain audible and visual alarm indicators and should be combined with area alarm for low space consumption. It should provide a zone isolation facility for use either in an emergency of for maintenance purpose. The Area Valve Service Unit should incorporate a ball valve either side mounted in a lockable box with emergency access. Area alarm pannels :- (a) 3 Gas Service ( for Oxygen, compressed Air & Vacumm) complete all as specified and directed.

Supply, Installation, testing and commissioning of MEDICAL LINE VALVE or ISOLATING VALVE as per HTM - 2022/02-01/DIN/ISO/BS EN 1057 or ball valves as per BS 1057, rated at 400 psig, as well as full cacuum (28.9"Hg) Valves go from full ON to full OFF by turning the vinyl-gripped valve handle 90degree Locking-type handles may be ordered separately when required. Copper tubing is factory installed to ehlp prevent valve seat damage during soldering. main and riser valves are not required to be installed in a box unless specially noted or required. Make : LMPL complete all as specified and directed. (a) 28 mm OD

(b) 15 mm OD

(c) 12 mm OD

Supply, installation testing and commissiong of Ward suction unit or Ward Vacuum Unit with above 1000 ml suction collection jar - 1 Nos as per specification mentioned below:- (a) The vacumm regulator should have a vacuum gauge with analong display. The scale should be in mbar or mmhg as required by the end user. (b) 01 no of Suction Regulator and 1no of 1000 ml polysulfone/polycarbonate collection jar. (c) Suction regulator should be supplied with a safety jar, including and antibacterial filter and antibacterial filter and an anti-overflow safety device and should have wide membrane continuous suction controller. (d) Should have vacuum levels : 0-760 mm of Hg and hould have vacuum gauge fitted with a protective bumber device. (e) Should have on/off knob allowing for the quick restoration of a readjusted cacuum level. (f) Must have central adjustment knob with a color coded for 0 to 760 mm of HG. should have polysulfone/polycarbonate 1700cc safety jar, autoclavable at 121 ° C at 5 mins, undreakable, fitted with an anti-overflow safety device and rquipped with a plastic antibacterial filter and should be totally transparent, to ensure perfect sucked liquid visibility. Make : LMPL/ANEER complete all as specified and directed.

Supply and fix Regulator valve with NRV to pevent backflow of oxygen gas reated 400 psig of size 42 mm dia of gases from pipeline complete all as specification and direction of Engineer-in-Charge. Make : LMPL Note for item No 48 to 56, (a) The Contractor shall submit MOU with authorised Medical Service engineer/registered Bio mediacl engineer service experienced in the relevant field not less than 5 year immediately before placing work order. (b) The Contractor shall prepare & submit general arrangement drawings of entire MGPS duly vetted by any Govt hospital Authy of Military Hospital before commencement of work. (c) The Contractor shall provide comprehensive on-site warranty (Including All spares, Accessories and Labour) for a period of 1 year from the date of final acceptance of the complete system after successful and complete installation and commissioning with regular updation of newer technology as and when evolved. MAKE-LMPL/CLASSIC complete all as specified and director.

Supply, Testing Commissioning of 2x3 Oxygen Manifold System with Tail Pipes, Manifolds and tested with hydraulic pressure testing complete all as sepcified and directed.

NOTES FOR ITEM NO 23.00 to 23.14 :- All the unseen items which arre required for successful execution on ground are deemed to be included in the above quoted rates.