Military Engineer Services Tender

Taking down the existing unserviceable MCBs/MCCBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified & directed by Engineer-in-charge.

Supply and fixing of LED box type Integrated Batten Wattage 20 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM-80 test report complete all as specified & directed by Engineer-in-charge.

Supply and fixing of LED box type Integrated Batten Wattage 24 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM-80 test report complete all as specified & directed by Engineer-in-charge.

Supply and fixing of LED box type Integrated Batten 40 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Elegant Design, IP 20 Protection. Dimensions of the Fitting Shall be Not less then 1200 MM ( Length) X 40 MM ( Width ) X 63 MM ( Height ). Lumens output of the fitting shall be not less then 4400 lm, CCT 5700 – 6500K, buring hours 50,000 Surge Protector 4 KV, PF= 0.95 , Separate detachable type Electronic constant current drivers for easy replacement and maintenance, THD 10%, Necessary mounting arrangements. The fixture shall be suitable for wall mounting /suspension mounting as per site requirement . The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM80 / Test Report complete all as specified & directed by Engineer-in-charge.

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified & directed by Engineer-in-charge.

Supply and fixing of recessed/ ceiling/ surface/ POP mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas 36 watt LED, size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified & directed by Engineer-in-charge.

S&F for LED downlight recessed/ ceiling/surface/ POP mounted luminare round type 18 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified & directed by Engineer-in-charge.

S&F for LED downlight recessed/ ceiling/ surface/ POP mounted luminare round type 24 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified & directed by Engineer-in-charge.

S&F bldg security light fittings Wall mounted LED light 35 Watt including bracket made out of GI pipe (medium grade) 40mm, 1.20 metre long made to shape and fixed outside of the building by means of 2 No FI 40x6 mm clamps with suitable size of nuts, bolts, washers and connecting with three core copper flexible cable of size 1.50 Sq mm complete all as specified & directed by Engineer-in-charge.

S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts, 0.6 M height , LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size one complete all as specified & directed by Engineer-in-charge.

S & F for LED post top lantern/gate Light 40 watt light fitting made of die cast top housing must also be dia cast aluminium spigot housing with decarative acrylic diffuser with IP 65 protection complete with all accessories complete all as specified & directed by Engineer-in-charge.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with fixing arrangement such as bracket,MS clamp,Nut bolts etc and connecting complete all as specified & directed by Engineer-in-charge. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with fixing arrangement such as bracket,MS clamp,Nut bolts etc and connecting complete all as specified & directed by Engineer-in-charge. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.

Supply and fix energy saving, environment friendly & robust Highbay/Mediumbay roof truss light LED for covered shed 150 W IP66 luminaire with high efficacy with fixing arrangement such as bracket,MS clamp,Nut bolts etc and connecting complete all as specified & directed by Engineer-in-charge. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.

S & F for MCCB DB VTPN 4 way 415 V double door, made out of 1.5 mm thick sheet metal enclosure of IP 43 with provision for FP MCCB/ Isolator/ RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply complete all as specified & directed by Engineer-in-charge.

S & F for sheet metal enclosure MCB DB TPN 4 way made out of 1.5 mm thick sheet metal enclosure IP 43 with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified & directed by Engineer-in-charge.

S & F for sheet metal enclosure MCB SPN DB 12 way made out of 1.5 mm thick sheet metal enclosure IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified & directed by Engineer-in-charge.

S & F for sheet metal enclosure MCB SPN DB 8 way made out of 1.5 mm thick sheet metal enclosure IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified & directed by Engineer-in-charge.

S & F for sheet metal enclosure MCB SPN DB 4 way made out of 1.5 mm thick sheet metal enclosure IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified & directed by Engineer-in-charge.

S & F MCCB 4 P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 160 Amps with extended terminals complete all as specified & directed by Engineer-in-charge. Note:- (i) Suitable size and frame of MCCB required as per existing DBs at site. (ii) MCCB Rating ICS=100 % ICU

S & F MCCB 4P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 125 Amps with extended terminals complete all as specified & directed by Engineer-in-charge. Note:- (i) Suitable size and frame of MCCB required as per existing DBs at site. (ii) MCCB Rating ICS=100 % ICU

S & F MCCB 4P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 100 Amps with extended terminals complete all as specified & directed by Engineer-in-charge. Note:- (i) Suitable size and frame of MCCB required as per existing DBs at site. (ii) MCCB Rating ICS=100 % ICU

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TPN 63 To 100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified & directed by Engineer-in-charge.

Supply and fixing miniature circuit breaker (MCB) of single pole and neutral SPN 40 to 63 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified & directed by Engineer-in-charge.

Supply and fixing miniature circuit breaker (MCB) of single pole SP 10-32 AMP 240V, 10 KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified & directed by Engineer-in-charge.

Supply and laying of 1100 volts grade heavy duty service cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 Core including PVC conduit pipe nominal cross section in service connections including taing down old unserviceable cable complete all as specified & directed by Engineer-in-charge.

S&F galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings and including taking down existing bracket of any description complete all as specified and directed by Engineer-in-charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 6 sq mm 2 core omplete all as specified and directed by Engineer-in-charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe/pole etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and n exc 1.5m in depth and getting out in Soft/disntegrated rock complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated material soil/disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as specified & directed by Engineer-in-Charge. (Note :- Punned thickness of sand cushioning shall only measured for the purpose of payment).

Supply & laying unreinforced precast concrete cable covers class LV type flat size 250 mm x 150 mm x 40 mm complete all as specified & directed by Engineer-in-Charge.

S&F steel water tubing 40 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in trench on pole for protection of cable etc and including taking down existing pipe of any description complete all as specified & directed by Engineer-in-charge.

M & L for laying of Gl steel tube medium grade of size 40 mm dia galvanized with all fitting laid in trenches including taking down existing pipe of any description complete all as specified & directed by Engineer-in-charge.

M&L for road cutting for passing of HT/LT cable inside GI pipe of suitable size complete digging after laying of pipe line / cable making good the surface complete all as specified & directed by Engineer-in-charge.