Military Engineer Services Tender

M&L for complete removal of existing treatment over Brick/concrete /plastered / stone /Asbestos surface of any description and applying two coat of Camouflage pattern exterior emulsion paint over one coat of primer complete all as specified .

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and prepare the surface and applying one coat of exterior emulsion paint complete all as specified.

M&L for Preparation of old decorative concrete, plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and prepare the surface and applying one coat of cement based paint of approved colour complete all as specified.

M&L for Preparation of old decorative concrete, plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and prepare the surface and applying one coat of cement based paint of approved colour in camouflaging pattern complete all as specified.

all as per Srl item No 06 here in above but applying one coat of cement base paint white or tinted on ceiling/soffit of chajja complete complete all as specified.

M & L for Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and applying one coat of distemper oil emulsion white or tinted complete all as specified.

all as per Srl item No 9 here in above but applying one coat of distemper oil emulsion white or tinted on ceiling complete all as specified.

M&L for one coat Fire resisting paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface in camouflaging pattern including all preparatory work complete all as specified

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface in camouflaging pattern including all preparatory work complete all as specified

M&L for one coat painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described not exc 10 CM width or girth including preparation of surface complete all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 brick work / stone masonary or cement concrete surfaces of wall including finishing the surface taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces complete all as specified.

M&L for Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of cement concrete surfaces including finishing the surface taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces complete all as specified.

M&L for Rendering 5mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement and taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces complete all as specified.

M & L for Preparation of new plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of Distemper Oil emulsion white or tinted over a coat of alkali resistant primer with 3mm thick wall care putty on wall complete all as specified.

M & L for Preparation of new plastered surface including cornices, pilasters etc by brooming down and applying two coats of Exterior plastic emulsion white or tinted over a coat of alkali resistant primer with 3mm thick wall care putty on wall complete all as specified.

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant priming paint with hand roller of approved colour or camouflaging pattern complete all as specified.

M & L for Preparation of new plastered surfaces of ceiling & applying three coat of white wash complete all as specified.

M&L Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specified.

M&L Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work complete all as specified.

M&L for Rough Cast Plaster in two layers, under layer 10mm thick in CM 1:4 (1 cement : 4 coarse sand) on fair faces of brick work or concrete surfaces, furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1:1 (1 cement : 1 coarse sand : 1 stone chipping 6 to 12 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings and Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces complete all as specified and as directed complete all as specified

Cutting or uprooting grass incl removing old mud phuska/ roof treatment of n.exc 50mm thickness any description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete as specified.

M&L for 20mm thick screed bed or bedding layer of cement mortar 1:4, finished even and smooth without using extra cement all as specified.

M&L for 40mm thick PCC type B-1,( 1:2:4) using 20 mm graded stone aggregate with integral water proofing compound as per manufacturers specification finished even and fair complete as specified

Supply only Integral Water proofing compound

M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, repair all cracks by cutting "V" groove and fill with PMC mortar (Polymer modified cement mortar) prepared by cleaning free from dust and loose particles and apply on dry surface first coat of crack fillar using putty knife or trowel allow to dry for 4 to 6 hr, afterthat apply second coat and dry for 4-6 hrs in ratio as per manufacturers specification, provide 75 mm x 75 mm coping made out of PMC mortar as above on all joints of vertical upstands to ensure that moisture content in the prepared surface does not exceed 5% immediately before application of liquid membrane. Material incorporation & Protection be provided as Terrasheild first apply with water (ratio terrasheild : water will be 4:1) as primer with coverage area 0.1 Kg per Sqm. After 2-3 hour later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller.Spread non woven geo textile of 40 / 50 gsm with overlap of 50 mm in both direction when the surface is still tacky. After 4-6 hour later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller. final thickness of complete treatment should be minimum 1.0 mm. Water tank and Khurra location one additional coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm be provided. after complete application full curing minimum 7 days . Above complete application will be done authorized apllicator from Manufacturer and manufacturer's specification. Make IWL co/ STP/Piddilite .