Military Engineer Services Tender

If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.

Military Engineer Services - MES Tender

Works
Civil And Construction
Building Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date14 Dec 2024
Closing Date20 Jan 2025
Tender Amount₹ 28,33,00,000 
Notes
Download

Costs

Summary

Provn Of Klp Under Ge (a) Suratgarh

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
All as per above Srl item No. 03 but for one socket out let 5 Amps point controlled by one switch (on same board) complete all as specified and as directed by Engineer-in-charge.(switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

67

-

-

... More
All as per above Srl item No. 03 but for one socket out let 5 Amps point controlled by one switch (on independent board and not below the any other switch board) complete all as specified and as directed by Engineer-in-charge. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

72

-

-

... More
All as per above Srl item No. 03 but for one call bell point controlled by one bell switch (on independent board and not below the any other switch board) complete all as specified and as directed by Engineer-in-charge. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

4

-

-

... More
Material and labour for concealed Point wiring for one light point controlled by two Nos- two way switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switch, including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switches complete all as specified and as directed. (switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

2

-

-

... More
Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch (on independant board) (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).

32

-

-

... More
Supply and fixing (concealed flush to wall) factory made VTPN (Vertical type), 4 Way 415V, as per IEC 61439-3, DB (made out of CRCA sheet not less than 1.2mm thick, with copper bus bar rating 160 Amps, with two neutral bar, 2 earth bar and cable tie for cable management, including in built one number MCCB 4 pole 100Amp, 16KA as incomer and suitable for mounting MCBs as outgoing, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCBs for outgoing shall be measured and paid separately under appropriate item of BOQ.

1

-

-

... More
Supply only modular switch 6Amps, piano flush type, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.

989

-

-

... More
Supply only modular switch 16Amps, piano flush type, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.

32

-

-

... More
Supply only modular switch 6Amps, piano flush type, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge.

4

-

-

... More
Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and as directed by Engineer-in-charge.

139

-

-

... More
Supply only modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and as directed by Engineer-in-charge.

32

-

-

... More
Supply and fixing Ceiling Rose, polycarbonate, isolated body, surface bakelite 3 terminal, 240 volts, 5/6 Amp, ISI Marked complete all as specified and as directed by Engineer-in-charge.

529

-

-

... More
Supply and fixing electric calling Bell Ding Dong type, AC 230 Volts single pole including making elctric connection complete all as specified and as directed by Engr-in-charge.

4

-

-

... More
Supply only modular Bell Push switch, piano flush type, 6Amps, single pole, one way (1 module) fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and as directed by Engineer-in-charge.

4

-

-

... More
Supply and hanging /fixing ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, maximum 30W (± 10%), Temperature rise 40 degree maximum without remote with and including capacitive regulator, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan complete all as specified and as directed by Engr-in-charge. Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker and fixing of regulator on switch board, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account

117

-

-

... More
Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 300mm sweep with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc mounted in suitable opening arrangement in wall and electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 12mm dia 200mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account (ii) Cost for making suitable cutting/opening in wall for fixing of exhaust fan including making good disturbed surface and masonary work shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

6

-

-

... More
Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 450mm sweep with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc mounted in suitable opening arrangement in wall and electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 12mm dia 200mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account (ii) Cost for making suitable cutting/opening in wall for fixing of exhaust fan including making good disturbed surface and masonary work shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

6

-

-

... More
Supply and fixing air circulator heavy duty wall mounting 450 mm sweep , AC single Phase 230V, 50 Hz, not less than 1440RPM, 100Watt, air delivery 6120 cum/hrs, ISI marked with built in selector switch including making connection by using three core PVC Insulated PVC Sheathed copper conductor flexible cable as per manufacturer's instructions from ceiling rose to air circulator complete all as specified and as directed by Engineer-in-charge. Note:- (i) The air circulator is to be fixed on wall with all necessary T & P and other accessories required shall be deemed to be included in the above item no extra payment will be admissiable on this account. (ii) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on air circulator with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

1

-

-

... More
Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 4 Way 240V, suitable for mounting MCB/Isolator etc, as per IEC 61439-3, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.

6

-

-

... More
M&L for fixing street light housing bracket, made out of 1.5 mtr long 32 mm dia GI light grade pipe bended to 120 degree angle at half meter from bottom, including two sets of clamps made out of mild steel flat iron of size MS MS bolt, nut and washers for fixing of bracket on wall/pole including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of zinc chromate primer complete all as specified and directed by Engineer-in-charge.

159

-

-

... More
Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, as per IEC 61439-3, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.

16

-

-

... More
Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 4 Way 240V, suitable for mounting MCB/Isolator etc, as per IEC 61439-3, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.

14

-

-

... More
Material and labour for concealed wiring for TV antenna connection complete with coaxial RG-6 heavy duty PVC insulated sheathed cable with copper conductor having single strand of 0.7 mm dia and a aluminium wire net drawn through PVC conduit complete all as specified and as directed. (TV antenna connection socket outlet, terminal box, conduit with fittings shall be measured and paid separately under appropriate item of BOQ).

60

-

-

... More
Supply and fixing MCB ‘B’ curve suitable for 240 volts AC supply, 6 to 32 Amps, TPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

160

-

-

... More
Supply and fixing MCB ‘C’ curve suitable for 240 volts AC supply, 1 to 5 Amps, TPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

20

-

-

... More
Supply and fixing MCB ‘B’ curve suitable for 415 volts AC supply, 40 to 63 Amps, TPN, with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

2

-

-

... More
Supply and fixing MCB ‘B’ curve suitable for 415 volts AC supply, 6 to 32 Amps, TPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

2

-

-

... More
Supply and fixing MCB ‘B’ curve suitable for 240 volts AC supply, 06 to 32 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

35

-

-

... More
Supply and fixing MCB ‘B’ curve suitable for 415 volts AC supply, 25 to 63 Amps, TP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

2

-

-

... More
Supply and fixing blanking plate of plastic suitable for any type of DB complete all as specified and as directed by Engineer-in-charge.

14

-

-

... More
Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 4 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable 1100 volt drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-charge. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

220

-

-

... More
Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 6 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable 1100 volt drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-charge. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

120

-

-

... More
Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 6 Sqmm single core (05 run i.e 4 runs for main 3 phase & 01 neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable 1100 volt drawn through and including PVC conduit 32mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed. Note :- Five runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

80

-

-

... More
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board, HT/LT equipments, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

44

-

-

... More
Supply and fixing recessed LED ceiling light fitting with wide light window for maximised glare free output, suitable for ceiling cutout 595x595mm modular grid/POP ceiling finishes complete fitting with separate electronic driver and high brightness LED 34/36 Watt flat panel of size 600x600mm, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed:- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP20. (g) CCT : 6500K (h) CRI : Morethan 80 (j) CRCA pre coated housing. (k) LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection minimum 3 kV. (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

10

-

-

... More
Supply and fixing LED tube light fitting polycarbonate housing 1 x 18/20 Watt, appx 4 feet long, with decorative box linear, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable of size 01 sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6500K (l) CRI : more than 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) (n) Aluminium housing and integrated electronic driver

345

-

-

... More
Supply and fixing LED tube light fitting polycarbonate housing 1 x 10 Watt, appx 2 feet long, with decorative box linear, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable of size 01 sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6500K (l) CRI : more than 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

4

-

-

... More
Supply and fixing LED tube light fitting polycarbonate housing 1 x 5 Watt, appx 1 feet long, with decorative box linear, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable of size 01 sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6500K (l) CRI : more than 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

63

-

-

... More
S&F and testing LED PIT/ Trench Light fitting 1x20watt including LED tube specially designed for service pits. The system wattage of fitting should not be more than 20 watt = 10%, surge protection of minimum 2KV, power factor should be more than 0.90, cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 100 lumens per watt, total input voltage range 140-280V AC, colour rendering Index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin complete all as specified and directed by Engineer-in-Charge

1

-

-

... More
Supply and fixing lamp holder PVC/polycarbonate type with back plate suitable for batten fitting including one LED lamp 1x 0.5 watt red/green colour complete all as specified and directed by Engineer-in-Charge

2

-

-

... More
Supply and fixing energy efficient LED security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/roadway luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5Sqmm from ceiling rose to light fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : More than 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) Note :- Bracket for fixing shall be measured and paid seperately

79

-

-

... More
Supply and fixing High bay beam LED light fitting of 50 Watt, specifically designed heat sink for long life vertical high bay/medium LED luminaries complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy including fixing on wall/roof with help of suitable GI clamps, nut bolts/fastners, pendant of suitable length and washers etc, the luminaries shall be monolithic construction totaly enclosed dust and water proof with minimum IP 65 protection as per IS-10322 (1982, Part-I) with latest amendments and input voltage range 140-300V, AC frequency 50-60Hz, PF should be more than 0.9 with total Harmonic distoration THD (I) less than 15%, cool white colour and lamp starting time should not be more than 10 second, Fitting should be provided with 10KV Surge protection, Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300V, AC, Driver should also have double phase protection, no load, open circuit and short circuit protection. LED light fitting should be suitable for ambient temperature from minus 10 degree centigrade to 50 degree centigrade and humidity level 10% to 90% RH. LED Driver of the make as of the luminaire. Covers should be polycarbonate/toughened glass to ensure IP 65 degree protection, cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report.complete all as specified and as directed by Engineer-in-Charge

51

-

-

... More
Material and labour for concealed in wall rigid non matallic PVC conduit 20mm dia (medium duty, ISI marked) for SUBMAIN/telephone wiring etc inclusive of all fitting & accessories such as tees, bends, elbow, reducer, junction box, pipe hooks etc, bell mouth tube ends including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed by Engineer-in-Charge

150

-

-

... More
Material and labour for concealed in wall rigid non matallic PVC conduit 25mm dia (medium duty, ISI marked) for SUBMAIN/telephone wiring etc inclusive of all fitting & accessories such as tees, bends, elbow, reducer, junction box, pipe hooks etc, bell mouth tube ends including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed by Engineer-in-Charge

150

-

-

... More
Material and labour for Mild steel box flush mounted of size 100mm x100mmx50mm having holes for 20 mm conduit entry including 03 pin telephone socket outlet flush type marked with symbol of telephone and 03 mm thick plastic laminated sheeet cover and making good disturbed surfaces of walls by using CM (1:3) complete all as specified and as directed by Engineer-in-Charge

4

-

-

... More
Material and labour for Mild steel box flush mounted of size 100mm x100mmx100mm having holes for 20 mm conduit entry including 02 pin TV socket outlet flush type marked with symbol of TV and 03 mm thick plastic laminated sheeet cover and making good disturbed surfaces of walls by using CM (1:3) complete all as specified and as directed by Engineer-in-Charge

2

-

-

... More
Supply and fixing CMRI certified flameproof 1x16 Watt LED tube light fitting, well glass luminaire suitable for RF LED lamp, recommended for Gas/Vapour group of IIA & IIB and zone 1 & 2, IP65 protection, Epoxy finish LM6 die cast aluminium housing with heat resistant toughened glass, including inbuilt electronic driver, 2 kv surge protection, internally pre-wired, LED lamp, connector block etc complete with all other accessories including making electric connection connecting with twin core twisted flecible copper conductor cable and connector block, tobe fixed flush to wall/ceiling surface complete all as specified and as directed by Engineer-in-Charge. Specification for LED luminaire (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP65. (g) CRI : More than 80 (h) CCT : 6500 K. (i) LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended)

7

-

-

... More
Material and labour for concealed Flame proof Point wiring for light/fan points (using red, black and green colour wires as colour coding for single phase circuits) complete with 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) for main point and for continues as earth wire connected to earth dolly etc. (Phase, netural and earth wire) drawn through and including ERW rigid conduit stove enamelled conduit with all flame proof fittings and all flame proof accessories (duly tested by CMRI) i.e. pipe bend, union socket, reducer, elbow, pipe hook, connectors, junction box, insepction elbow, GI sunken terminal box with 3mm thick bakelite laminated hylem sheet top cover etc, including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note :- (i) Swicth, MCB and DB shall be measured and paid separately under appropriate item of BOQ).

8

-

-

... More
Supply and fixing CMRI certified flameproof exhaust fan of size 305mm, single phase, with 1440 RPM , 0.25 HP, 1120 CFM, complete with all other accessories including making electric connection connecting with three core twisted flecible copper conductor cable and connector block, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Serial Number as issued by Engr-In-Charge of fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account

1

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “INTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Section - III (Part-I)

1

205245

-

... More
Sch 'A' Sec - III (Part-II), INTERNAL WATER SUPPLY WORKS

-

-

-

... More
Supply and fixing two way Bib cock/Angle stop valve with flange, cast copper alloy chromium plated, screwed down high pressure with on/off handle screwed ends suitable for 15 mm bore pipe iron pipe or for brass ferrule/unions and fixed complete all as specified and as directed. Make: Jaguar(continental series)/Hindware (contessa plus series)/ Cera (Ocean series) or any technocommercial make approved by GE

17

-

-

... More
Supply and fixing health faucet fancy type, CP including 1.2 meter long 8mm dia flexible tube and including wall hook and fixing material complete all as specified and as directed by Engineer-in-charge. Make: Jaguar(continental series)/Hindware (contessa plus series)/ Cera (Ocean series) or any technocommercial make approved by GE

17

-

-

... More
Supply & fixing of 16mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed and shown on drawings.

172

-

-

... More
Supply & fixing of 20mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed and shown on drawings.

326

-

-

... More
Supply & fixing of 25mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed and shown on drawings.

119

-

-

... More
Supply & fixing of 40mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed and shown on drawings. NOTE FOR CPVC PIPES : Pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface with wall hooks/clamps (all as per shown in drg No BTD-916) as directed by Engineer-in-Charge. Nothing shall be paid extra on this account

21

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “ROAD, PATH, CULVERT, HUME PIPE AND STONE SETT ROAD WORKS) " as listed in Schedule ‘A’ Section -IV (Part-I)

1

19180105

-

... More
Sch 'A' Sec - IV (Part-II), ROAD, PATH, CULVERT, HUME PIPE AND STONE SETT ROAD WORKS

-

-

-

... More
Material and labour for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. Note:- Paver Block shall be approved by GE before incorporation in the work.

1750

-

-

... More
Supply and laying factory made kerb stone of size 30x15x45cm of M-25 grade cement concrete laid in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement:3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge

138

-

-

... More
Material and labour for Thermo plastic paint road marking 2mm thick painting (lines, dashes, arrows, letters etc) with road safety spikeries glass beads @ 8% by weight including preparation of new or previously treated road surfaces and applying paint by using special applicator machine with heating arrangement complete all as specified and as directed by Engineer-in-Charge

520

-

-

... More
Supply and fixing metal tubular Delineator made out of ABS round body fitted with 02 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe 600mm height duly podwer coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4, type B1) block size 150x150x300mm including necessary earthwork complete all as specified and as directed by Engineer-in-Charge

200

-

-

... More
Material & labour for providing and laying Premix bituminous macadam of minimum compacted thickness 50mm, using paving bitumen binder of grade VG-30 @ and binder content of 4% by weight of total mix with mixing of aggregates and VG-30 bitumen in electronic operated 100-120 TPH batch type Hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hydrostatic sensor paver, rolled and compacted to required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per clause 504 MORTH (5th revision) specification and as directed.

696.5

-

-

... More
Note :- (i) The contractor shall quote the rate against item considering 4% VG-30 bitumen content, Job mix formula as per clause No. 505.3.3 of MORTH ( 5th revision) for BM shall be worked out from any Govt Lab/Govt Engg college/CTL for obtaining optimum binder content (OBC) by the contractor and same shall be submit for approval of Accepting Officer through GE before execution. The cost thereof shall be deemed to be included in quoted unit rate. Any variation in binder content on minus side shall be adjusted @ 50/kg of binder and NO adjustment shall be made on plus side. (ii) The BM shall be covered with top layer/wearing course within a maximum of 48 hours. If there is to be any delay by the contractor, course shall be covered by seal coat to the requirement of clause 512 of MORTH (5th revision) before opening to the traffic. The seal coat in such cases shall be considered incidental to the work and shall not be paid for separately. (iii) The contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorpoation of the same in the work. (iv) Paver shall not be compulsory in case of patch work using BM. (v) Payment shall be made after conducting bitumen extraction test after every laying every 500 units and cost is deemed to be included in the quoted rates. For any variation in bitumen contents the re-testing to be got done by contractor at without any extra cost.

-

-

-

... More
Material & labour for laying Premix bituminous concrete 40mm consolidated thickness with 5.5% paving bitumen binder of grade VG-30, content by weight of total mix and crushed aggregates of grading 2 with mixing of aggregates and VG-30 bitumen in electronic operated 100-120 TPH batch type Hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hydrostatic sensor paver, rolled and compacted to required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per clause 507 MORTH (5th revision) specification and as directed.

1393

-

-

... More
Note :- (i) The contractor shall quote the rate against item considering 5.5% VG-30 bitumen content, Job mix formula as per clause No. 505.3.3 of MORTH ( 5th revision) for BC shall be worked out from any Govt Lab/Govt Engg college/CTL for obtaining optimum binder content (OBC) by the contractor and same shall be submit for approval of Accepting Officer through GE before execution. The cost thereof shall be deemed to be included in quoted unit rate. Any variation in binder content on minus side shall be adjusted @ Rs 50/kg of binder and NO adjustment shall be made on plus side. (ii) Cost of filler i.e. cement (OPC) is deemed to be included in quoted unit rate. (iii) After spreading of mix as as per clause 507.4.7 MORTH (5th revision) entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight , followed by finished rolling 6 to 8 tonne smooth wheel tendom roller as per clause No 507.4.8 MORTH (5th revision) and cost of the same is deemed to be included in quoted rates. (iii) The contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorpoation of the same in the work. (iv) Payment shall be made after conducting bitumen extraction test after every laying every 500 units and cost is deemed to be included in the quoted rates. For any variation in bitumen contents the re-testing to be got done by contractor at without any extra cost.

-

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “(AREA DRAINAGE WORKS)" as listed in Schedule ‘A’ Section -V (Part-I)

1

2657521

-

... More
Sch 'A' Sec - V (Part-II), AREA DRAINAGE WORKS

-

-

-

... More
Material and labour for Pre-cast factory made RCC drain of size and shape as directed by GE alongwith male and female ends for proper joining, made of 75mm thick RCC M-30 using 20mm graded aggregate, duly embeded two Nos socket for hoisting including form work etc, hosting and placing at site and jointed in CM (1:4) to form uniform length and fair finish to drain upto 80cm girth (width measured @ Avg of inner and outer girth) complete all as specified and as directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid separately under respective item of Sch.

239.4

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “SEWAGE DISPOSAL WORKS" as listed in Schedule ‘A’ Section - VI (Part-I)

1

1478003

-

... More
Sch 'A' Sec - VI (Part-II), SEWAGE DISPOSAL WORKS

-

-

-

... More
Supply and laying DWCPE (SN8) drain pipes 180 mm Outer Dia/163 mm Internal dia as per IS-16098 (Part-II), laid in trenches on and including bed 100mm thick beding comprising of well compacted clean poorly graded gravel, gravel/sand mixture with little or no fines to required slope, including all accessories/fittings/jointing ring, jointing and testing complete all as specified and as directed by Engineer-in-Charge. Note : Excavation, earth work and pedestal /anchorage if required shall be measured & paid separately under respective item of Sch

485

-

-

... More
Supply and laying DWCPE (SN8) drain pipes 200 mm Outer Dia/175 mm Internal dia as per IS-16098 (Part-II), laid in trenches on and including bed 100mm thick beding comprising of well compacted clean poorly graded gravel, gravel/sand mixture with little or no fines to required slope, including all accessories/fittings/jointing ring, jointing and testing complete all as specified and as directed by Engineer-in-Charge. Note : Excavation, earth work and pedestal /anchorage if required shall be measured & paid separately under respective item of Sch.

200

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “ SECURITY FENCING AND GATE WORKS" as listed in Schedule ‘A’ Section - VII

1

3714365

-

... More
Lump sum price worked out by the tenderer for “EXTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Section-VIII (Part-I)

1

672622

-

... More
Sch 'A' Sec - VIII (Part-II), EXTERNAL WATER SUPPLY WORKS

-

-

-

... More
Material and labour for Cutting of existing DI/CI/GI pipe line 200mm bore for inserting and including tee of size 200x200x150mm for taping in trenches including run lead joint complete all as specified and as directed by Engineer-in-Charge. NOTE:- Necessary earth work, DI fitting/lead joints etc reqd to complete the job deemed to be included in the quoted rate.

1

-

-

... More
Supplying, laying, jointing and testing Ductile iron pipe (ISI marked) class K-9, bore 200mm, confirming to IS : 8329-2K, spigot & socketed ends centrifugally cast, with cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, including rubber tyton joints (Push-on joint) complete all as specified and as directed by Engineer-in-Charge. Note : (i) Earth work, DI specials/ fittings shall be measured and paid separetly however cost of joining is included in overall cost quoted by the contractor. (ii) Test Certificate for pipes from manufacturer shall be produced. No payment shall be entertained without Test Certificate.

350

-

-

... More
Supply and fixing DI fitting upto 200 mm bore pipe line, confirming to IS : 9523-2K, for reducing/bends (any type radius and angle) tapers any type, straight, bend, increasing decreasing or double socket extra Tee pieces single branch Y 'Junction' double branch cross collers cap etc complete all as specified and as directed by Engineer-in-Charge. Note:- Make of DI fittings shall be same make as DI pipe or as per recommendation of DI pipe manufacturer.

99

-

-

... More
Supply and fixing cast iron sluice valve 200 mm dia with flanged ends class PN 1.6 (heavy duty ISI marked) confirming to IS:14846-2000, drilled type, complete with stainless steel spindle, CI gate with brass ring, iron wheel handle, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc complete all as specified and as directed by Engineer-in-Charge.

1

-

-

... More
Supply and fixing cast iron sluice valve 150 mm dia with flanged ends class PN 1.0 (heavy duty ISI marked) confirming to IS:14846-2000, drilled type, complete with stainless steel spindle, CI gate with brass ring, iron wheel handle, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc complete all as specified and as directed by Engineer-in-Charge.

1

-

-

... More
Supply and fixing cast iron sluice valve 80 mm dia with flanged ends class PN 1.0 (heavy duty ISI marked) confirming to IS:14846-2000, drilled type, complete with stainless steel spindle, CI gate with brass ring, iron wheel handle, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc complete all as specified and as directed by Engineer-in-Charge.

2

-

-

... More
Material and labour for Construction of brick masonary valve pit chamber size 120 X120 X120 cm (internal dimension) using sub class 'B' bricks complete including excavation & earth work, returning fillig and disposal of surplus soil to distance not exceeding 50m and deposited where directed, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation, coping on top in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, brick work in cement mortar (1:4), inner plaster 12 mm thick in cm (1:3) finished even and smooth and pionting flush externally as the work proceeds in the same mortar, MS sheet cover 3.15mm thick mounted on angle iron frame of size 40 x 40 x 6mm with handle and locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and embeded portion of MS work duly applying black bitumenous paint before embeded complete all as specified and as directed by Engineer-in-Charge.

2

-

-

... More
Material and labour for Construction of brick masonary valve pit chamber size 90 X90 X90 cm (internal dimension) using sub class 'B' bricks complete including excavation & earth work, returning fillig and disposal of surplus soil to distance not exceeding 50m and deposited where directed, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation, coping on top in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, brick work in cement mortar (1:4), inner plaster 12 mm thick in cm (1:3) finished even and smooth and pionting flush externally as the work proceeds in the same mortar, MS sheet cover 3.15mm thick mounted on angle iron frame of size 40 x 40 x 6mm with handle and locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and embeded portion of MS work duly applying black bitumenous paint before embeded complete all as specified and as directed by Engineer-in-Charge.

12

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “EXTERNAL ELECTRIFICATION, LIGHTNING PROTECTION WORKS" as listed in Schedule ‘A’ Section - IX (Part-I)

1

4386239

-

... More
Sch 'A' Sec - IX (Part-II), EXTERNAL ELECTRIFICATION, LIGHTNING PROTECTION WORKS

-

-

-

... More
Supply and installation of HT 11 KV, 3 Phase, 50 Hz totally enclosed metal clad switchgear complete with Vacuum circuit breaker (indoor type) incoming and outgoing complete, having rupturing capacity 250 MVA, overload and earth fault protection ammeter, voltmeter and of rating upto 400 Amp. complete all as specified and as directed by Engineer-in-charge.

1

-

-

... More
Supply and erecting prestressed concrete pole 11 mtr long class B 152mm x152 mm at top and 152 mm x 260 mm at bottom complete, duly painted with upto 1.5 metre height from PCC coping with two coats of synthetic enamel paint in alternate black and white strips 30 cm wide each strip (05 Nos) including marking pole number in letters & figures of size not less than 10cm height with red colour enamel paint complete all as specified and as directed by Engineer-in-charge. Note:- (i) Excavation, earthwork and PCC shall be measured and paid separately under respective item of Sch. (ii) Srl number will be issued by Engineer-in-Charge.

2

-

-

... More
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing strip 32x6mm by means of GI bolts/nuts/washers and protected by 40 mm bore GI light grade pipe upto test point or upto main switch board / electric equipment / pole / lightning arrestor / HT/LT equipments / GODO switch etc, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing strip upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

27

-

-

... More
Supply, installation, commissioning and testing of Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proof, internally prewired top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint with control wiring and locking arrangement etc complete all as directed by Engineer-in-charge. comprising of following accessories :-

1

-

-

... More
(a) Busbar aluminium - 800 Amps -04 Nos (b) MCCB 4 pole 500 Amp, 415 volt, 36KA, (Incomer) - 01 Nos (c) MCCB 4 pole 163 Amp, 415 volt, 36KA - 05 Nos (d) MCCB 4 pole 63 Amp, 415 volt, 36KA - 04 Nos (d) MCB SPN 32 Amps, 240 volt, 10kA, 'C' curve - 02 Nos (e) MCB SPN 6 Amps, 240 volt, 10kA , 'C' curve - 03 Nos (f) Voltmeter ( 0-500V) digital tyype with selector switch - 01 Nos (g) Ammeter (0-800 Amps) digital type with CT's and selector switch (h) Indication lamp with LED type - Set of three

-

-

-

... More
Supply, installation, commissioning and testing of Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proofv, top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint with control wiring and locking arrangement etc complete all as directed by Engineer-in-charge. comprising of following accessories:-

1

-

-

... More
(a) Busbar aluminium - 200 Amps -04 Nos (b )MCCB 4 pole 100 Amp, 415 volt, 36 kA , 01 Nos (Incomer) (c) MCB TPN 25 Amp, 415 volt, 10kA , 'C' curve - 04 Nos (d) MCB SPN 16 A, 240 volt, 10KA , C Series - 1 Nos (e) MCB SPN 6 A, 240 volt, 10KA , C Series - 3 Nos (f) Voltmeter ( 0-500V) digital tyype with selector switch (g) Ammeter (0-300 Amps) digital type with CT's and selector switch (h) Indication lamp with LED type

-

-

-

... More
Supply, installation, commissioning and testing of Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proofv, top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint with control wiring and locking arrangement etc complete all as directed by Engineer-in-charge. comprising of following accessories :-

1

-

-

... More
(a) Busbar aluminium - 200 Amps -04 Nos (b) MCCB 4 pole 100 Amp, 415 volt, 36 KA, 01 Nos (Incomer) (c) MCB TPN 32 Amp, 415 volt, 10kA , 'C' curve - 03 Nos (d) MCB SPN 32 A, 240 volt, 10kA , C Series - 2 Nos (e) MCB SPN 10 A, 240 volt, 10kA , C Series - 3 Nos (f) MCB SPN 6 A, 240 volt, 10kA , C Series - 4 Nos (g) Voltmeter ( 0-500V) digital tyype with selector switch (h) Ammeter (0-800 Amps) digital type with CT's and selector switch (j) Indication lamp with LED type

-

-

-

... More
Supply, installation, commissioning and testing of Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proofv, top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint with control wiring and locking arrangement etc complete all as directed by Engineer-in-charge. comprising of following accessories :-

1

-

-

... More
(a) Busbar aluminium - 250 Amps -04 Nos (b) MCCB 4 pole 160 Amp, 415 volt, 36 KA, 01 Nos (Incomer) (c) MCCB 4 pole 63 Amp, 415 volt, 36KA - 03 Nos (d) MCB SPN 25 A, 240 volt, 10kA , C Series - 2 Nos (e) MCB SPN 6 A, 240 volt, 10kA , C Series - 9 Nos (f) Voltmeter ( 0-500V) digital type with selector switch (g) Ammeter (0-800 Amps) digital type with CT's and selector switch (h) Indication lamp with LED type

-

-

-

... More
S&F outdoor lighting switching panel, Three phase, 415 volts , AC, max load 5kW, with AC3 contactor 20 Amps, High voltage/Log voltage trip and auto reset, suitable for automatic switching ON at dusk (60 Lux) and automatic switching OFF at dawn (10 Lux) of outdoor lighting, with space grade sensors and an advanced micro controller, with enclosure IP66 protection fixed on street light pole with all electrical connection complete all as directed by Engineer-in-charge.

1

-

-

... More
Supply, installation, testing and commissioning of Automatic Power Factor Correction (APFC) capacitor panel having aggregate capacity 100 KVAR in 4 stage with micro processor based control, factory made outdoor type, platform mounted, suitable for 440 volt, 3 phase, 4 wire, 50 Hz AC supply system having duly insulated copper bus bar, dust and vermin proof, IP-54 class prootection and made of 3.15mm CRCA MS Sheet and 40x40x6mm thick angle iro frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, bothside opening type, with aprons for frm cale entry, with double door shutter and locking arrangement (incl provn of 65mm Godrej (Novtal) lock with two keys, inteernal wiring with PVC insulated, solid copper conductor, FRLS cables, SI-694 marked of adequate size but not less than 2.5 sqmm complete all as specified and directed and comprising of following :- Incoming :- (a) MCCB 4 pole 160 Amp 36 kA 415V-01 Nos Outgoing :- (i) Power factor corrector relay 3 stage Microprocessor based, modular type intelligent APFC relay capable of having self adjustment to any capacitor value suitable to maintain power factor between 0.85 to 0.95 with digital indicatio of power factor, preset parameters and having in built capabiity of indication and elimination of defective capacitor steps-01 Nos

1

-

-

... More
Supply and Installation,testing and commissioning of platform mounted transformer 250 KVA, 11/0.433KV, 50 Hz, step down, outdoor type, ONAN Cooled oil immersed copper wound energy efficient transformer, complete with first filling of IS-335 ISI marked filtered & dehyrated tranformer oil and other standard fittings/acceesories and 7 position OFF load circuit tap changer (Tapping range + 7.5% in steps of 2.5% Each) with vector group Dyn-11, with provision of HV and LV cable box suitable for making connection of incoming HT cable and outgoing LT cable all as per IS 1180-2014 (Level-2) and complete with and including all required accessories for installation of transformer all as specified and directed. The transformer shall comprises following: (i) 03 Nos porcelain bushings with copper rod on HV side. (ii) 01 cable end box on LV side consisting of 04 Nos bushing. (iii) Oil conservator tank with filter type drain plug and oil level guage. (iv) Dehydrating breather with first fill of silica gel (v) explosive vent ,oil level guage,oil drain filter valve,lifting hooks,oil filling hole with cap/plug with connection plate, Air release valve plug complete.

1

-

-

... More
(vi) 01 Nos 100mm dia, dial type thermometer,vapour pressure type having range 0-120 degree with metal guard. (vii) 02 Nos earthing terminals on tank cover to facilitate fixing of 50x6mm GI earth strip for earthing of body including rating plate and terminal marking plate. All date shall me marked on Rating plate. (viii)First fill of unused and new transformer oil,IS-335 Marked filtered and tested upto 60KV die electric strngth at 2.5 mm air gap between testing electrode. (ix) Buchholtz relay-01 No. (x) Quoted rate includes construction of plateform of size 2500 x 2500 x 1200mm with brick construction in cement mortar 1:4 PCC (M-10 nominal mix) in foundation, 100mm thick RCC M-25 grade slab, with 8mm MS TMT bars 120mm c/c on bothway, brick masonary steps on one side XPM Jali fixed on angle iron 40x 40x6 mm post upto height of 8 feet above ground level and openable gate with locking arrangment including making provision for entry and exit of HT/LT cables and steps made to access to the top of platform including plastering to bricks masonary complete including painting with 2 coats of whitewash on plastered surface and painting steel surface with 2 coats of red oxide primer complete all as specified and as directed. note: (i) Transformer shall be pre-commissioned by SEI after installation and before issue of completion certificate to the contractor. (ii) Cost of all T&P and measuring devices shall be provided by the contractor without any extra cost to the Govt

-

-

-

... More
Supply and fixing energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of luminarie should be minimum 110 Lumen per watt. (b) Input voltage range 140 to 270 volts (c) Temp operating range minimum 10°C to Plus 50°C (d) Power factor : minimum 0.95 (e) THD : Max 10% (f) CRI : More than 80 and CCT : 5700 K (g) IP rating : IP66 (h) IK rating : Minimum IK07 (j) Pressure die cast aluminium alloy for housing and heat resistant alear toughened glass (k) Built in potted LED driver of the make as of the luminaire. (l) LED driver should be complete with all protection viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection 10 kV (inbuilt + extended) (n) Lens:- High sfficiency wide angle lens (o) BIS approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

80

-

-

... More
Supply and fixing cable junction box of minimum Size 200mm x 160mm x 110mm or any other higher size complete with fixing accessories. Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. The polycarbonate junction box shall be environment friendly, recyclable, UV resistant, halogen and silicon free, anti acid and anti corrosive. The junction box knock out on four side wall and following specifications and all as directed by Engr-in-Charge :- (a) The junction box shall be rated for degree of IP 66 (ingress protection) in accordance with IEC 60529. (b) The gasket material shall be polyurethane or silicon and gasket shall be internally embedded and 63 A four pole terminal stud. (c) Junction Box must meet the provision laid down in IEC 60998-1, IEC-60670-22, IEC-60670-22, IEC 60670-2 to 5 and grey color according to RAL 7035. (d) The manufacturer of junction box shall submit a copy of IEC certificate and glow wire test for 960 degree. (e) Junction box shall be fire retardant and self extiguishing in accordance with IEC60695-2 to 11, DIN VDE 0304 Part-3, UL94 V-2 flammability standard. (f) The impact strength of polycarbonate enclosures /boards i.e. the degree of protection against mechanical load shall be in accordance with EN 50298-98 for IK08. (g) Junction box with stud type terminal, 63A flame retardant one number 6 Amp MCB SP 10KA (h) Manufacturer should submit routine test certificate for junction box. (j) Suitable size of mild steel Clamps duly painted and screws/nut bolt shall be used for fixing of Junction box.

80

-

-

... More
Sand cushioning, with dry and clean tibba sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed. Note:- (i) Punned thickness shall be considered for payment purpose (ii) Approved sand free from vegetations, grass and other deleterious substances shall be used.

557

-

-

... More
Supply and erecting factory made Octagonal Hot rolled steel pole conform to IS-2062/ BSEN 10025 with hot dipped galvanised finishing of 7 mtr long with mild steel base plate grouted alongwith foundation by means of 4 Nos M20 x 600 LG foundation bolts including single swan neck bracket. Note :- (i) Excavation, earth work shall be measured and paid separately under appropriate sch (ii) RCC M20 and steel for foundation shall be as per OEM recommendation and drawings which shall deemed to be included in quoted rates

80

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “SUMMER APPLIANCES, AIR CONDITIONING AND HOT WATER APPLIANCES WORKS" as listed in Schedule ‘A’ Section - X (Part-I)

1

39507

-

... More
Sch 'A' Sec - X (Part-II) , SUMMER APPLIANCES, AIR CONDITIONING AND HOT WATER APPLIANCES WORKS

-

-

-

... More
Supply, installing, commissioning and testing frost free refrigerator electric driven single phase 220 volts, AC 50 Hz, 250 ltrs or next higher capacity with BEE approved, minimum 3 star rating double door, stablizer free operation, Inverter Technology, R600a Refrigerant, tempered glass self, deodorizer and with fruit & vegitable drawer complete all as specified and as directed. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer.

2

-

-

... More
Supply, installing, commissioning and testing Water Cooler fully stainless steel (anti corrosive pre coated body), electric driven single phase having approx storage capacity of 80 Ltr and nominal cooling capacity of 40 Ltr per hour energy efficient compressor & Eco friendly refrigerant R-134a, with float valve and inlet PVC connection pipe of size 15 mm dia and 600 mm long of good quality complete with both ends CP nuts including electric connection through Voltage stablizer complete all as specified and as directed. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer.

3

-

-

... More
Supply, installing, commissioning and testing Water Cooler fully stainless steel (anti corrosive pre coated body), electric driven single phase having approx storage capacity of 40 Ltr and nominal cooling capacity of 40 Ltr per hour energy efficient compressor & Eco friendly refrigerant R-134a, with float valve and inlet PVC connection pipe of size 15 mm dia and 600 mm long of good quality complete with both ends CP nuts including electric connection through Voltage stablizer complete all as specified and as directed. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer.

4

-

-

... More
Supply and Installation of plastic body outdoor type Desert cooler of size 65.5cm x 63.4cm x 77.3cm or next available size, electric driven single phase 230 volts having nominal air flow capacity of 4000 Cu M per hours, water sump capacity not less than 40 ltrs, including water pump submesible type of suitable capacity ISI marked, complete including electric connection complete all as specified and as directed. Note (a) : Sufficient length of 3 core PVC sheathed round copper cable size 23/.0076 to enable fixing in to plug point shall be provided by contractor. (b) Water Pipes, float valve, stop valve, PVC connection shall be measured and paid seperately under respective item. (c) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer. (d) Serial Number as issued by Engr-In-Charge of cooler and GE Office name shall also be written on cooler with red colour permanent marker or paint, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account

36

-

-

... More
Supply & installing of Voltage stabilizer for automatic operation having input & output voltage, Amps, Over & low voltage cutout and timer delay function etc digital display single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA with wall mounting bracket complete all as specified and as directed. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer.

2

-

-

... More
Supply & installing of Voltage stabilizer for automatic operation having input & output voltage, Amps, Over & low voltage cutout and timer delay function etc digital display single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA with wall mounting bracket complete all as specified and as directed. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer.

2

-

-

... More
Supply & installing of Voltage stabilizer for automatic operation having input & output voltage, Amps, Over & low voltage cutout and timer delay function etc digital display single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA with wall mounting bracket complete all as specified and as directed. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer.

7

-

-

... More
Material and labour for concealed Point wiring for one socket outlet 15/16 Amps point controlled by one switch (on independant board) (using red, black and green colour wires as colour coding) complete with 4 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket, including provn of 4 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed by Engineer-in-charge. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).

4

-

-

... More
Supply and fixing (concealed flush to wall) factory made VTPN (Vertical type), 4 Way 415V, as per IEC 61439-3, DB (made out of CRCA sheet not less than 1.2mm thick, with copper bus bar rating of suitable capacity, with two neutral bar, 2 earth bar and cable tie for cable management, including in built one number MCCB 4 pole 160Amp, 16KA as incomer and suitable for mounting MCBs as outgoing, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCBs for outgoing shall be measured and paid separately under appropriate item of BOQ.

1

-

-

... More
Supply & fixing rotational moulded polyethylene water storage tank of capacity 500 litres (cylindrical vertical, double layered with closed top), hoisted and fixed in position including inlet and out let connection complete all as specified and as directed.

5

-

-

... More
Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.

4

-

-

... More
Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 4 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable 1100 volt drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

60

-

-

... More
Supply and fix Air cooled Heat Pump delivering actual capacity as per the following parameters. Heat Pump shall be rated at nominal input power 2.2 KW with output heating capacity 8 KW lectrical backup 12 KW having inbuilt tank capacity – 455 litres having glass lining. Water temp in efficiency mode using compressor should be 65 degrees C. heat Pump should have all the safety protections like high/low voltage, high temperature, refrigerant leak, compressor overheating protection with operational noise level not more than 60 dbA. Heat pump should have a user friendly control panel to set the desired temperature showcasing the actual temp also with flexibility of installing the same 15-30m away from the heat pump also Complete all as specified and directed

1

-

-

... More
Supply and fix Air cooled Heat Pump delivering actual capacity as per the following parameters. Heat Pump shall be rated at nominal input power 2.0 W with output heating capacity 5.40 KW lectrical backup 2 KW having inbuilt tank capacity – 80 litres having glass lining. Water temp in efficiency mode using compressor should be 65 degrees C. heat Pump should have all the safety protections like high/low voltage, high temperature, refrigerant leak, compressor overheating protection with operational noise level not more than 60 dbA. Heat pump should have a user friendly control panel to set the desired temperature showcasing the actual temp also with flexibility of installing the same 15-30m away from the heat pump also Complete all as specified and directed

1

-

-

... More
Supply and fixing MCB ‘C’ curve suitable for 415 volts AC supply, 40 to 63 Amps, TPN, with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge

1

-

-

... More
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 32 Amps of poles and current carrying capacity in the MCB DB complete with connection testing complete all as directed and specified and as directed by Engineer-in-charge

4

-

-

... More
Supply, installing, commissioning and testing hi wall split units indoor / outdoor Air conditioner cooling type both complete with cordless remote control unit and within built air purifier, dehumidifier, air filter and dust filter for better indoor air quality with minimum BEE approved, 5 star rating, inverter type, EER 3.2, Electric driven single phase 230 volts, AC, 50HZ, R-410A/R-32 refrigerant of capacity 2 Ton, inverter type, noise level should be less than 45 DB including copper piping of adequate size and required length as directed duly insulated with suitable insulating material e.g. class 'O' Nitrile insulation of minimum 12mm thick for condensing unit, copper cable of suitable size for making electric connections, including necessary fixing arrangement (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room) complete as specified and as directed. Note:- (a) Suitable piping shall be provided of adequate length of size 5/8" for draining of condensate water from indoor unit. Cost of same shall deemed to be included in quoted rate. (b) Suitable Copper tubing in addition if required extra as per site requirement from indoor unit to outdoor unit shall be provided and cost of same shall to be included in quoted rate. (c) Cost for Metallic bracket and nut bolt for fixing indoor and outdoor unit including necessary cutting / grouting in walls by cutter and making good the surface in CM 1:3 and to the original finishes (white wash/colour wash/Distemper) shall deemed to be included in quoted rate. (d) Contractor shall submit original purchase voucher and Warranty card. Minimum warranty should be 1 year for complete product, 10 year for compressor, 5 year for condensor and PCB card after Installation and commissioining of complete unit.

2

-

-

... More
Supply, installing, commissioning and testing hi wall split units indoor / outdoor Air conditioner cooling type both complete with cordless remote control unit and within built air purifier, dehumidifier, air filter and dust filter for better indoor air quality with minimum BEE approved, 5 star rating, inverter type, EER 3.2, Electric driven single phase 230 volts, AC, 50HZ, R-410A/R-32 refrigerant of capacity 1.5 Ton, inverter type, noise level should be less than 45 DB including copper piping of adequate size and required length as directed duly insulated with suitable insulating material e.g. class 'O' Nitrile insulation of minimum 12mm thick for condensing unit, copper cable of suitable size for making electric connections, including necessary fixing arrangement (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room) complete all as specified and as directed. Note:- (a) Suitable piping shall be provided of adequate length of size 5/8" for draining of condensate water from indoor unit. Cost of same shall deemed to be included in quoted rate. (b) Suitable Copper tubing in addition if required extra as per site requirement from indoor unit to outdoor unit shall be provided and cost of same shall to be included in quoted rate. (c) Cost for Metallic bracket and nut bolt for fixing indoor and outdoor unit including necessary cutting / grouting in walls by cutter and making good the surface in CM 1:3 and to the original finishes (white wash/colour wash/Distemper) shall deemed to be included in quoted rate. (d) Contractor shall submit original purchase voucher and Warranty card. Minimum warranty should be 1 year for complete product, 10 year for compressor, 5 year for condensor and PCB card after Installation and commissioining of complete unit.

2

-

-

... More
Subtotal

-

-

-

... More
Lump sum price worked out by the tenderer for “HARD STANDING (FOR WHEELED VEH AND FOR GUARD HOUSE) WORKS" as listed in Schedule ‘A’ Section - XI

1

4118569

-

... More
Lump sum price worked out by the tenderer for “RAIN WATER HARVESTING AND ENVIRONMENTAL POND WORKS" as listed in Schedule ‘A’ Section - XII

1

596666

-

... More
M&L for loose filling of broken boulder of gauge 20 mm in soakage pits, soakage wells, recharge pit etc complete all as specified and as directed.

12.8

-

-

... More
Supplying and laying 125 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over tack coat /sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm complete all as specified and as directed.

380

-

-

... More
Lump sum price worked out by the tenderer for “EXCAVATION, EARTHWORK AND SITE DEVELOPMENT WORKS" as listed in Schedule ‘A’ Section - XIII

1

6723879

-

... More
Schedule 'A' Section -XIV (Furniture Works)

-

-

-

... More
Almirah medium Steel Drg No. FD-1032

12

-

-

... More
Almirah large Steel Drg No. FD-1031

7

-

-

... More
Book Case Steel Glazed Large Drg No. FD-1028 & 1028A

5

-

-

... More
Chair wodden bottom without arms Drg No. FD-285

16

-

-

... More
Chair Varandah Drg No. FD/Map-II/06

10

-

-

... More
Chair Empire (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE)

1

-

-

... More
Chair writing officers steel Drg No. FD/E6/MAP/12

52

-

-

... More
Hat stand with mirror Drg No. FD-361

3

-

-

... More
Hot case Large Drg No. FD-364

1

-

-

... More
meat safe and milk Drg No. FD-370

3

-

-

... More
Table dining 6 pers Drg No. FD/MAP-II/03

9

-

-

... More
Table 900x900 mm steel Drg No. FD-1009

7

-

-

... More
Table 900x900 mm steel with drawer Drg No. FD-1008

4

-

-

... More
Table cook house steel Drg No. FD-1019

2

-

-

... More
Table office officers steel Drg No. FD-1003

2

-

-

... More
Teapoy Wooden Drg No. FD-278

2

-

-

... More
Teapoy verandah Drg No. FD/E6/MAP/17

2

-

-

... More
Table office Steel Drg No. FD-1010

3

-

-

... More
Chair executive revolving (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE) Make: EEZY Office System Pvt Ltd Model : Eezy 266 or Techno commercial equivalent approved by GE

3

-

-

... More
Chair revolving long Back (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE) Make: EEZY Office System Pvt Ltd Model : Eezy 266 or Techno commercial equivalent approved by GE

1

-

-

... More
Bath mat PVC Drg No.FD/E6/MAP/07

1

-

-

... More
Bed Hard Steel Drg No. FD/E6/MAP/8R

1

-

-

... More
Chair Easy Drg No. FD-229

29

-

-

... More
Chair dining Drg No. FD-1105

46

-

-

... More
Chair writing Drg No. FD-280

45

-

-

... More
Book Shelf large steel Drg No. FD-69M

11

-

-

... More
Side Rack With Tray Drg No. FD-1023

17

-

-

... More
Sofa single seater Drg No. FD-373

2

-

-

... More
Stool steel 510mm Drg No. FD-81M

26

-

-

... More
Chair CB steel with arms Drg No. FD-75(M)

30

-

-

... More
Chair barber with adjustable neck rest, Overall approximate size shall be 1050mm high x 550mm wide and 550 mm deep, Chair shall be of trade pattern, with chrome base and chrome arms, the seat and back of the chair shall be made of PU foam duly covered with high quality tapestry cloth, the chair shall have the arrangement of tilt and push back and also fitted with hydraulic mechanism for height adjustment .The chair shall be provided with head rest and foot rest. Make:- JSK,Model-JBC-01 or Techno commercial equivalent approved by GE

2

-

-

... More
Table Office Clerk Steel Drg No. FD-1004

25

-

-

... More
Pointer large Drg No. FD-406

3

-

-

... More
Pointer short Drg No. FD-406

3

-

-

... More
Table 90cm x 60cm without drawer steel Drg No. FD-1007

7

-

-

... More
Form with Back Drg No. FD-78M

14

-

-

... More
Form without Back 1900x300x450mm Drg No. FD-1027

1

-

-

... More
Pre-laminated Conference Table (oval shape) with 25mm Top 10 Seater (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE) Make : Model-Mingle of Godrej/ Empire safe Co of RoyalKoas or Techno commercial equivalent approved by GE

1

-

-

... More
Locker bed side steel Drg No. FD-1029

70

-

-

... More
ladder aluminium Drg No. FD-1025

3

-

-

... More
Bench work shop Drg No. FD-1024

7

-

-

... More
Trestle Store Room Steel Drg No. FD-1043

58

-

-

... More
Mirror large 1200x900mm superior quality (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE)

4

-

-

... More
Table 600x600 mm Drg No. FD-293

4

-

-

... More
Table centre Drg No. FD-274

1

-

-

... More
black board with easel Drg No. FD-1041

3

-

-

... More
Carpet Woolen 4Mtr x3.5 Mtr superior quality (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE) Drg No. TP

4

-

-

... More
Desk stand lecture steel Drg No. FD-1022

3

-

-

... More
Receptacle PVC Drg No. FD/E6/MAP/13

9

-

-

... More
Charpoy Hard top steel Drg No. FD/MAP-II/01

79

-

-

... More
Rack teel 6 tier (1905x915x610 mm) Drg No. FD-1038

70

-

-

... More
Rack for 20 Carbine Machine (It shall be manufactured out of teak wood (MP teak) through out to accommodate 20 Carbine Machine. Finish : All wood surfaces shall be lacquer polished. ) Make: Kaypee& Co Model : Riflok (Two Tier Type) or Techno commercial equivalent approved by GE

3

-

-

... More
Riffle Rack for 20 Rifles INSAS (It shall be manufactured out of teak wood (MP teak) through out to accommodate Riffle Rack for 20 Rifles INSAS. Finish : All wood surfaces shall be lacquer polished.) Make: Kaypee& Co Model : Riflok (Single Tier Type) or Techno commercial equivalent approved by GE

5

-

-

... More
Riffle Rack for 10 Rifles INSAS (It shall be manufactured out of teak wood (MP teak) through out to accommodate Riffle Rack for 10 Rifles INSAS. Finish : All wood surfaces shall be lacquer polished.) Make: Kaypee& Co Model : Riflok (Single Tier Type) or Techno commercial equivalent approved by GE

2

-

-

... More
Rack Pigeon Hole Steel Drg No. FD-1037

1

-

-

... More
Durrie 12 feet x 10 feet superior quality (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE)

2

-

-

... More
Drugget 3 mtr x 2 mtr superior quality (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE)

1

-

-

... More
Display board of size 6 feet x 4 feet superior quality (All as per trade pattern/as per sample kept with BSO office. Make to be approved by GE)

6

-

-

... More
Note:-Quantities of materials given on standard drawings are for guidance only. The contractor shall work out the quantities of materials required for each item of BOQ and quote his rate accordingly no claim shall be entertained on account of inaccuracy in the quantities of these materials and workman ship which shall be as specified in particular specifications and as approved. The drawing No's mentioned in BOQ item No 133 to 190 shall form part of tender document which will not be attached with tender document. The tenderers are deemed to be in possession and conversant fully with the drawing shown in standard furniture designs including amendments published by AHQ, Engineer-in -Chief, New Delhi. For reference and guidance the tenderer may study and see these drawings in the any office of Garrison Engineer in MES before quoting their rates. No claim shall be entertained regarding misinterpretation of the drawings at a later stage.

-

-

-

... More
Subtotal

-

-

-

... More
Schedule 'A' Section -XV (Arboriculture Works)

-

-

-

... More
S&F Inermi Hedge boundary plantation trees , 1 to 3 feet plants including 1 years old. Digging pit size 0.75 x 0.75 x 0.75 filling with manure pesticides including removing surplus soil to a distance not exc 250M complete all as specified and as directed by Engineer-in-charge

1200

-

-

... More
S&F Boxwood Hedge boundary plantation trees , 1 to 3 feet plants including 1 years old. Digging pit size 0.75 x 0.75 x 0.75 filling with manure pesticides including removing surplus soil to a distance not exc 250M complete all as specified and as directed by Engineer-in-charge

1200

-

-

... More
Supplying following plants of 0.25 m to 0.30m height including digging holes 1.20m dia x1.2m deep in ordinary soil and refilling the same with the excavated earth mixed with manure of approved quality or sludge in ratio 3:1 (One part of manure & 3 part of soil) manure 200 gm per plant ,flooding with water and removal of surplus soil n.exc 1.50 Km and depositing where directed with & including using suitable chemicals or pesticides of approved quality, as required and making Thaola all as specified and as directed by Engineer-in-charge. Note :- Contractor shall maintain the trees till physical completion of contract.Unit rate quoted is inclusive of replacement of dead trees,manures and all fertilizers mentioned above is inclusive in rate quoted.

-

-

-

... More
Pink/red Rose

120

-

-

... More
Bougainvilla

100

-

-

... More
Tecoma Yellow

250

-

-

... More
Ashoka

150

-

-

... More
Sheesham Tree

200

-

-

... More
Neem Tree.

200

-

-

... More
Madhu tree.

900

-

-

... More
Areca Palm

80

-

-

120

-

-

60

-

-

... More
M&L for laying of lawn selection No 1 grass in rows 5cm apart in either direction including digging of lawn area upto 30cm depth breaking go clods, removal of store etc. mixing of vermi compost @3Kg/Sqm and insecticides, mixing in all, leveling, wateing and cutting and dressing till the grass form as a thick lawn free from weeds and fit for moving complete all as specified and directed.

7300

-

-

... More
Subtotal

-

-

-

... More
Schedule 'A' Section -XVI (Arboriculture Maintenance Works)

-

-

-

... More
Complete maintenance of plant/hedge grass by weeding, hosing, watering, saucer making once in 15 days (every month in alternate day ) for plant/ hedge, insect and pest management (as and when required ), as directed by Engineer-in-Charge pruning new plants in place of dead plants of same species and height tuning with out extra cost to the department complete all as specified and as directed by Engineer -in-charge. (Note Manure & pesticide required for maintenance of plant under this item shall be arranged by the contractor at his own cost and cost of the same shall be deemed to included in the rate quoted against this item)

12

-

-

... More
Subtotal

-

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.