Military Engineer Services Tender

S&F for Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way single pole and neutral complete all as specified and directed.

S&F for Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way single pole and neutral complete all as specified and directed.

S&F for Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 415 Volts 4 way triple pole and neutral complete all as specified and directed.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 Sq mm 1100 volts grade including and 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping conduit incl. Note :- Two run of 4.00 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and 25 mm PVC conduit/casing caping shall be measured & paid as one unit.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6.00 Sq mm 1100 volts grade including and 6.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping conduit incl Note :- Two run of 6.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor and 25mm PVC conduit/casing caping shall be measured & paid as one unit.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 10.00 Sq mm 1100 volts grade including and 10.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping conduit incl Note :- Two run of 10.0 Sqmm cable and one run of 10.0 Sqmm cable as earth continuity conductor and 25mm PVC conduit/casing caping shall be measured & paid as one unit.

M&L for submain wiring with 4 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 10.00 Sq mm 1100 volts grade including and 10 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping conduit incl. Note :- Four run of 10.00 Sqmm cable and two run of 10 Sqmm cable as earth continuity conductor and 32 mm PVC conduit/casing caping shall be measured & paid as one unit.

S&F for Vertical TPN Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 415 Volts 4 way triple pole and neutral complete all as specified and directed.

S&F for MCCB 4 Pole, 125 Amp, 16 KA complete all as specified and directed.

Taking down unserviceable MCCBs/MCB’s of any type complete all as specified and directed.

S&F for MCB, 6 to 32 Amp, SP, 240 Volt. complete all as specified and directed by Engineer-in-Charge.

S&F for MCB, 40-63 Amp, SPN, 240 Volt. complete all as specified and directed by Engineer-in-Charge.

S&F for MCB,TPN 100 AMP 415V 10KA 'C' curve complete all as specified and directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down submain wiring of any size complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm copper conductor cables (multistranded) FRLSH PVC insulated and unsheathed in and including surface stove enamelled steel conduit (ISI marked) 25mm dia with sunk cast iron/pressed steel terminal box of adequate size for one light pointcontrolled by one, one way flame proof switch including continuous 1.5 Sqmm copper conductor (multistranded) FRLSH PVC insulated and unsheathed cable connected to earth dully complete all as specified conforming to IS-694 including fixing of conduit with clamps and screws at a interval not more than 1 mtr and making the disturbed surface to match with the existing surface and colour.

S&F for Switch flame proof rotary type with termination box in LM6, 6A, single pole 250V complete all as specified and directed.

S&F for LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

M&L for Wiring for circuit/submain wiring alongwith earth wire of the sizes 2x4.0 Sqmm + 1x4.0 Sqmm of FRLSH PVC insulated copper conductor, single core cable in stove enamelled steel conduit as required complete all as specified and directed.

M&L forWiring for circuit/submain wiring alongwith earth wire of the sizes 4x6.0Sqmm + 2x6.0 Sqmm of FRLSH PVC insulated copper conductor, single core cable in stove enamelled steel conduit as required complete all as specified and directed.

S&F for flame proof and weather proof MCB socket & plug combined, 16 Amp 250V (2P+Earth) complete all as specified and directed.

S&F for flame proof and weather proof MCB socket & plug combined, 25 Amp 500V (3P+Earth) complete all as specified and directed.

S&F for Flame proof DB SPN 4 way, double door, 240V with MCB SPN 32 Amp -01 No and MCB SP 6-32 Amp - 02 Nos complete all as specified and directed.

S&F for Flame proof DB TPN 4 way, double door, 240V with MCCB TPN 63 Amp -01 No and MCB SP 6-32 Amp - 12 Nos complete all as specified and directed.

M&L for Earthing with GI earth plate electrode 600x600x6 mm thick buried directly in ground vertically to a depth of not less than 2.25m below the ground level with top edge of earth plate at a depth of not less than 1.5m below the ground level connected to galvanized iron wire 4mm earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth wire protected by and including GI Pipe 15mm bore (light grade upto a length of 7.5 mtr and connected to main test point as directed and including concrete pit using PCC (1:3:6) type C-1,precast RCC (1:1.5:3) type A-1 cover slab of size 40x40x5 cm reinforced with 8mm dia TMT bars @ 150mm C/C both ways with one handle for lifting, made out of 8mm dia MS bar embeded in precast cover slab, in and including funnel with wire mesh, 20mm bore galvanised or steel pipe (light grade) for watering, adequate quantity of charcoal & salt in alternative layers including necessary excavation and earth work in any type of soil including taking down old unserviceable complete all as shown on electrical plate No. 3 of SSR Part-I

Taking down LT UG cable of size 10 SQmm 4 core and 16 Sqmm 4 core complete all as specified and directed. Note :- Cost of excavation, returning filling and removal shall be deemed to be included in the quoted rate. No extra payment shall be made.

Supply, laying and testing cable XLPE insulated screened PVC beded galvanized steel strip or wire armoured electric power cable (H/duty) with stranded Al conductor 1100 volt grade of size 4 core 16 Sqmm laid in trenche/crossing the road/fixed on pole complete all as specified and directed.

Supply, laying and testing cable XLPE insulated screened PVC beded galvanized steel strip or wire armoured electric power cable (H/duty) with stranded Al conductor 1100 volt grade of size 4 core 10 Sqmm laid in trenche/crossing the road/fixed on pole complete all as specified and directed.

S&F for PVC insulated round three core cable with copper conductor conductor 1.5 Sqmm for connecting street light fitting from junction box including taking down old unserviceable complete all as specified and directed.

S&F for street light junction box of size not less than 200x140x95mm which is totally safe, shock proof, impact resistant, weather proof, dust proof, rust proof, halogen and silica free, having internal embedded gasket technology made of PUR with suitable degree of protection and cable glands including taking down old unserviceable complete all as specified and directed.

S&F for LED flood light 120 watt, 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp incuding taking down old unserviceable complete all as specified and directed.

Repair to LT Panel door and Distribution board door of size not more than one Sqm with the help of 2mm thick CRCA sheet including fixing of hinges and tower bolt with the help of welding machine and painting of CRCA sheet with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm copper conductor cables (multistranded) FRLSH PVC insulated and unsheathed in and including concealed stove enamelled steel conduit (ISI marked) 25mm dia with sunk cast iron/pressed steel terminal box of adequate size for one light pointcontrolled by one, one way flame proof switch including continuous 1.5 Sqmm copper conductor (multistranded) FRLSH PVC insulated and unsheathed cable connected to earth dully complete all as specified conforming to IS-694 including fixing of conduit with clamps and screws at a interval not more than 1 mtr and making the disturbed surface to match with the existing surface and colour.

S&F for Switch flame proof rotary type with termination box in LM6, 6A, single pole 250V complete all as specified and directed.

S&F for LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed.

S&F for Flame proof DB SPN 4 way, double door, with MCB SPN 32A-01, MCB SP 10A-02, 240V complete all as specified and directed.

M&L for point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 20 mm dia/PVC casing caping for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed. (a) One exhaust fan point controlled by one, one way switch

S&F for switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and directed.

S&F for exhaust fan, steel body,AC single phase 230V of size 300mm sweep with blades and frames and louvers including making holes in to the wall as per fan size and making good the disturved surfaces all as directed by Engineer-In-Charge.

M&L for making holes suitable for 300mm exhaust fan in stone/brick masonary and making good the surfaces by plastering to match with the existing surface complete all as specified and directed.

S&F for exhaust fan, sturdy Engineering plastic,AC single phase 230V of size 250mm sweep with blades and frames and louvers including making holes in to the wall/cutting the window or ventilator as per fan size and making good the disturbed surfaces complete all as specified and directed.