Military Engineer Services Tender

All as per Srl item No. 2 above but for 2 Ton EOT crane.

All as per Srl item No. 2 but above for 1.5 Ton EOT crane.

Supply and topping of gear oil (For LT, CT hoist and creep gear box) complete all as specified and directed by Engr- In - Charge

S&F in replacement of rope guide for 5 Ton EOT crane complete all as specified and directed by Enggr- In - Charge

S&F in replacement of rope guide for 2 Ton EOT crane complete all as specified and directed by Enggr- In - Charge

M&L in replacement of Air brake contactor size 1, 16 Amps rated 415/116/24 volts crane complete all as specified and directed by Engr- In - Charge. Make: Siemens / L&T

All as per Srl Item No. 9 above but size 1.5, 20 Amps, 415 / 110 / 24 Volts.

All as per Srl Item No. 9 above but size 2, 32 Amps, 415 / 110 / 24 Volts.

All as per Srl Item No. 9 above but size 3, 40 Amps, 415 / 110 / 24 Volts.

S&F in replacement of cable carrier for 5 Ton EOT crane complete all as specified and directed by Engr- In - Charge Make: EE / L&T

S&F in replacement of cable carrier for 10 Ton EOT crane complete all as specified and directed by Engr- In - Charge. Make: EE / L&T

S&F in replacement of HRC fuse 10 to 32 Amps rating complete all as specified and as directed by Engr -in-charge.

All as per Item Sr No. 15 above but 63 Amp rating.

S&F in replacement of fuse base carrier 16 to 32 Amps complete all as specified and directed by Enggr- In - Charge. Make: EE / Havells / L&T.

All as per Item Sr No. 17 above but 63 Amp rating.

S&F in replacement of brake disc washer for EOT crane up to 1.5 to 10 ton complete all as specified and directed by Engr- In - Charge.

S&F in replacement of upper and lower hook fitting of 1.5 to 10 ton EOT crane complete all as specified and directed by Engr- In - Charge.

S&F in replacement of element of push button station complete all as specified and directed by Engr- In - Charge. Make: L&T / Avon / Technic.

S&F in replacement of push button of push button station complete all as specified and directed by Engr- In - Charge. Make: L&T / Avon / Technic.

S&F in replacement of PVC insulated copper cable of size 2.5 Sqmm, 4 core complete all as specified and directed by Enggr- In - Charge. Make: Gradley / BCH / Finolex / L&T / Havelles.

S&F in replacement of rubber buffer for 5.0 ton EOT cranes complete all as specified and directed by Enggr- In - Charge.

S&F in replacement of rubber buffer for 1.5 Ton EOT cranes complete all as specified and directed by Enggr- In - Charge.

S&F in replacement of LT / CT wheel with bearing for to 1.5 to 10 ton EOT cranes complete all as specified and directed by Enggr- In - Charge.

S&F in replacement of LT / CT wheel with bearing for 1.5 Ton EOT cranes complete all as specified and directed by Enggr- In - Charge.

S&F in replacement of spur gear for gear box of LT motion upto 5.0 Ton EOT cranes complete all as specified and directed by Enggr- In - Charge.

All as per Ser Item No. 28 above but for CT motion.

All as per Ser Item No. 28 above but hoist / creep motion.

S&F in replacement of oil seal of gear for CT / LT / Hoist / Creep gear box upto 5.0 Ton cranes complete all as specified and directed by Engr- In - Charge.

S&F in replacement of taper roller bearing of gear box of CT / LT / Hoist / Creep gear box upto 5.0 Ton cranes complete all as specified and directed by Engr- In - Charge.

M&L for replacement of wiring in control panel as per motor rating with PVC copper conductor cable in PVc channel and testing up to 10 Ton EOT cranes, complete all as specified and directed by Enggr- In - Charge.

M&L for replacement of wiring in control panel as per motor rating with PVC copper conductor cable in PVC channel and testing up to 5 Ton EOT cranes, complete all as specified and directed by Enggr- In - Charge.

M&L for replacement of wiring in control panel as per motor rating with PVC copper conductor cable in PVC channel and testing up to 2 Ton EOT cranes, complete all as specified and directed by Enggr- In - Charge.

M&L for re-winding of electric motor 5 HP, 415 Volts, 3 phase with enameled copper conductor as per existing size varnishing drying etc, complete all as specified and directed by Enggr- In - Charge. Note: After dismantling of UNSV motor the contractor will load in his own vehicle for repair at civil area and after repair the same will be fixed in existing place with proper connection.

All as per Ser Item No. 36 above but 7.5 HP, 415 volts, three phase.

All as per Ser Item No. 36 above but 10 HP capacity.three phase.

S&F in replacemnt of shaft pedestal for LT shaft as per existing size complete all as specified and directed by Enggr- In - Charge.

S&F in replacemnt of double ball bearing self aligned as per existing size complete all as specified and directed by Enggr- In - Charge Make : NBC/SKF

M&L for spray painting EOT crane by applying two coats of golden yellow / Tractor orange / any other synthetic enamel 1st quality paint after scrapping of old paint with blow lamp / manually sand paper for capacity of 1.5 Ton to 10 Ton cranes complete all as specified and directed by Enggr- In - Charge.

S&F in replacemnt of steel wire rope 10 mm suitable for 1 to 5 Ton EOT crane complete all as specified and directed by Engr- In - Charge.

S&F in replacemnt of electro magnetic brake coil for hoist motion of upto 10 Ton EOT cranes complete all as specified and directed by Engr- In - Charge.

Comprehensive repair/maintenance of EOT crane 22 Nos includuing carrying out Monthly check and servicing of fully automatic flame proof electrical crane upto 10 ton capacity with simplex collective control system, with repair and maintenance of unserviceable damaged parts,such as bushes,all types of guide shoes, hangers, and its contact control cards control connector/links, limit switches, push buttons and its spares, and maintenance of of wire rope, necessary wiring and cable as per requirement for safe operations of crane repair/maintenance of control panel, cleaning of SWR etc to ensure safety and smooth functioning of all as specified and directed by Engr-in-Charge for following:- (a) Greasing / oiling of required parts i.e. shaft coupling, rope drum etc. (b) Checking & testing / adjustment of brakets for all motion. (c) Checking & tighting of coupling bolts motor foundatin bolts etc. (d) Checking the wiring connections in control panel & other accessories. (e) Checking of gear oil in gear box - For info please (Filling & topping gear oil shall be paid under respective item of BoQ) Note:- (i) Cost of minor spare parts/ routine material required for above mentioned maintenance is deemed to be included in the quoted rate. No additional cost of spares is admissible for the above maintenance. Decision of the Accepting Officer shall be final & binding regarding minor spares / routine material. (ii) Two Nos. experienced mechanic / technician shall be available to attend breakdown and ensure the safe, smooth, trouble free functioning of the crane.

S&F in replacemnt of electro magnetic brake complete set inclduing dismantling old unserviceable brake and removal from site complete all as specified and directed by Engr- In - Charge.

S&F in replacement of flame proof push button controlling unit comprising of 'On' & 'Off' operation to and for motion 'Up' & 'Down', long travel, & micro speed and emergency control of EOT crane including removal from site complete all as specified and directed by Engr- In - Charge.

S&F in replacement of PVC insulated electric wire copper conductor multi core having 12 pairs of size 1.5 Sqmm including removal form site complete all as specified and directed by Enggr- In - Charge, Make: L&T / Seimens / ABB.

S&F in replacement of control transformers of 415 volts / 110 Volts 500 VA incuding removal form site complete all as specified and directed by Enggr- In - Charge.

S&F in replacement of VVF drive suitable for 5.5 KW for hoist motion only by replacing the old U/S drive including removal form site complete all as specified and directed by Engr- In - Charge.

S&F in replacement of VVF drive suitable for 2.5 KW for hoist motion only by replacing the old U/S drive including removal form site complete all as specified and directed by Engr- In - Charge.

S&F in replacement of VVF drive suitable for 1.5 KW for hoist motion only by replacing the old U/S drive including removal form site complete all as specified and directed by Engr- In - Charge.

M&L in replacement of electro hydraulic thruster unit 18 Kg capacity complete all as specified and directed by Enggr- In - Charge, Make: Megtech ---------------------------------------------------------------------------------------------------- Note : A sum of Rs. 32552.00 will be deducted on account of credit for taken down material. Please refer details on Srl Page No. 21 & 22 (Schedule of Credit) of Tender documents.