Military Engineer Services Tender

M&L for complete servicing of 45 KVA DG set of any make and type to made functional replacing unserviceable spare parts, old oil filer, fuel filter , air cleaner filter element including drain out old engine oil (lubricants) and coolant including commissioning & testing on full load upto satisfaction after repair/ replacement at unserviceable parts/filter engine oil/ coolant etc. complete all as specified and as directed. (Note:- Replaced Spare parts/ engine oil/ coolant shall be measured & paid under appropriate items of Sch 'A')

M&L for complete servicing including dismantling of engine of 45 KVA DG set of any make & type by strip opening and repairing of diesel engine gen set with following repairs/ replacement of worn out spare parts, old oil filer, old fuel filter , old air cleaner filter element including drain out old engine oil (lubricants), coolants complete including commissioning testing on full load and entire satisfication of Engineer-in-charge after complete repairing (Testing shall be carried out for 08 hrs continious and diesel for testing shall be supplied by the deptt free for testing). (Note:- Spare parts shall be measured & paid as supply only under appropriate items of Sch 'A') (a) Valve set cutting and fixing of valve guide. (b) Fixing of cylinder linner. (c) Cylinder block liner bearing and threading of existing bores. (d) Fixing of piston ring complete. (e) Repair to cylinder block injector sleeves including fixing and testing complete.

M&L for complete servicing of 63 KVA DG set of any make and type to made functional replacing old oil filer, fuel filter , air cleaner filter element including drain out old engine oil (lubricants) and coolant including commissioning & testing on full load upto satisfaction after repair/ replacement at unserviceable parts/filter engine oil/ coolant etc. complete all as specified and as directed. (Note:- Replaced Spare parts/ engine oil/ coolant shall be measured & paid under appropriate items of Sch 'A')

M&L for complete servicing including dismantling of engine of 63 KVA DG set of any make & type by strip opening and repairing of diesel engine gen set with following repairs/ replacement of worn out spare parts, old oil filer, old fuel filter , old air cleaner filter element including drain out old engine oil (lubricants), coolants complete inculding commissioning testing on full load and entire satisfication of Engineer-in-charge after complete repairing (Testing shall be carried out for 08 hrs continious and diesel for testing shall be supplied by the deptt free for testing). (Note:- Spare parts shall be measured & paid as supply only under appropriate items of Sch 'A') (a) Valve set cutting and fixing of valve guide. (b) Fixing of cylinder linner. (c) Cylinder block liner bearing and threading of existing bores. (d) Fixing of piston ring complete. (e) Repair to cylinder block injector sleeves including fixing and testing complete.

Supply only following spare parts suitable for engine of 25 KVA DG to 63.5 KVA DG set of any make and type complete all as specified and as directed:-

(a) Main Bearing.

(b) Con Rod bearing.

(c) Bearing t/w Kir.

(d) Piston Assembly.

(e) Cylender liner .

(f) Valve pair inlet & Exhuast.

(g) Valve guide.

(h) Wire snap ring.

(j) Wire stem seal.

(k) Set of joints .

(l) Intermediate ring 1.3 mm.

(m) Shim Ring cylender.

(n) Set of rings.

(o) Oil Seal Big size as per requirement.

(p) Oil Seal small size as per requirement.

(q) Bearing C /Bush Kir.

(r) Bearing IG Bush .

(s) KOEL CARE super geniune oil 13 Ltr CAN.

(t) Fuel filter element pre.

(u) Fuel filter element micro.

(v) Lube oil filter element .

(W) Lube oil pump Assy.

(X) Sealing ring .

(Y) Hose for air cleaner 70 IDX 80L.

(z) Set of high pressure pipe.

Supply only element fuel filter both primary and secondary suitable for 25 KVA DG set complete all as specified and as directed.

Supply only oil filter suitable for 25 KVA DG set complete all as specified and as directed.

Supply only element air cleaner inner and outer suitable for 25 KVA DG set complete all as specified and as directed.

M&L for dismantling unservicable AVR and supply & fixing new AVR, suitable for 25KVA DG set, Make:Kiloskar/Stamford, commissioning & testing on full load complete all as specified and as directed.

M&L dismantling unservicable self starter 12 Volt DC with solonied switch suitable for 25 KVA DG set, transporting to civil workshop, complete repairing by replacing unserviceable parts, inatallation, commissioning & testing on full load complete all as specified and as directed.

Supply only element fuel filter both primary and secondary suitable for 45 KVA DG set complete all as specified and as directed.

Supply only oil filter suitable for 45 KVA DG set complete all as specified and as directed.

Supply only element air cleaner inner and outer suitable for 45 KVA DG set complete all as specified and as directed. Make:- Mico/Cummins

M&L for dismantling unservicable AVR and supply & fixing new AVR, suitable for 45 KVA DG set, commissioning & testing on full load complete all as specified and as directed .

M&L for dismantling unservicable self starter 12 Volt DC with solonied switch suitable for 45 KVA DG set, transporting to civil workshop, complete repairing by replacing unserviceable parts, inatallation, commissioning & testing on full load complete all as specified and directed .

Supply only element fuel filter both primary and secondary suitable for 63.5KVA DG set complete all as specified and as directed.

Supply only oil filter suitable for 62.5/63 KVA DG set complete all as specified and as directed.

Supply only element air cleaner inner and outer suitable for 63.5 KVA DG set complete all as specified and as directed.

M&L for dismantling unservicable AVR and supply & fixing new AVR, suitable for 62.5/63 KVA DG set, , commissioning & testing on full load complete all as specified and as directed.

M&L for dismantling unservicable self starter 12 Volt DC with solonied switch suitable for 62.5/63 KVA DG set, transporting to civil workshop, complete repairing by replacing unserviceable parts, inatallation, commissioning & testing on full load complete all as specified and as directed.

M&L for dismantling unservicable. self starter 12 Volt DC of 45 KVA to 63 KVA DG set and supply & fixing new self starter 12 Volt DC suitable for 45KVA to 63 KVA DG set, inatallation, commissioning & testing on full load complete all as specified and directed .

Supply & replacement of DC battery 12 volts, 150AH, maintenance free with 24 months gurrantee and 36months warrantee complete all as specified and as directed. Make:-EXIDE/POWER TECH

Supply & replacement of DC battery 12 volts, 180AH, maintenance free with 24 months gurrantee and 36months warrantee complete all as specified and as directed. Make:-EXIDE/POWER TECH

M&L for dismantling unservicable battery charging alternator 12V, DC suitable for 25 to 62.5 KVA DG sets, trasporting to civil workshop, complete repairing/ overhauling by replacing unsv parts, inatallation, commissioning & testing on full load complete all as specified and as directed.

Supply and topping up coolent in radiater of DG sets complete all as specified and as vdirected. Make : Castrol or equivalent out of makes spd in list of makes as approved by GE.

S&F MCCB 125 Amp 25 KA 4 pole 415 Volts complete all as specified and as vdirected.

M&L for painting of DG Set on one coat of synthetic enameled paint of DG set of any make and type installed at various sites 25 KVA to 62.5 KVA capacity complete with alternator as well as electric panel board by means of spray including preparation of surfaces before painting complete all as specified and as directed.

Taking out old unserviceble cable of any size complete all as specified and as directed.

Supply and laying in Trenches/floor/walls/roof cable XLPE insulated PVC un sheathed steel tape/ wire armoured multistranded aluminium conductor cable 1100 volts heavy duty of size 25 sqmm 3.5 core with jointing material like cable lugs ,gland and connecting up complete all as specified and as directed.

Supply and laying in Trenches/floor/walls/roof cable XLPE insulated PVC un sheathed steel tape/ wire armoured multistranded aluminium conductor cable 1100 volts heavy duty of size 35 sqmm 3.5 core with jointing material like cable lugs ,gland and connecting up complete all as specified and as directed.

Dismantling of existing defective Rotor of the 45 kva DG set disconnecting the electric connecting coupling pulley and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with solid copper conductor (winding wire) complete including varnishing, drying ovening overhauling greeasing and fixing in the same position making necessary electric connection and testing on DG set complete all as specified and as directed by Engineer-in-Charge.

Dismantling of existing defective Stator of the 45 kva DG set disconnecting the electric connecting coupling pulley and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with solid copper conductor (winding wire) complete including varnishing, drying ovening overhauling greeasing and fixing in the same position making necessary electric connection and testing on DG set complete all as specified and as directed by Engineer-in-Charge.

Dismantling of existing defective Excitor of the cap 45 kva to 63.5 KVA DG set disconnecting the electric connecting and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with solid copper conductor (winding wire) complete including varnishing, drying ovening overhauling greeasing and fixing in the same position making necessary electric connection and testing on DG set complete all as specified and as directed by Engineer-in-Charge.

Dismantling of panel wiring of DG set of capaity 25 to 62.5 KVA DG set, and rewiring with suitable size copper wire complete all as specified and as directed.

M&L for Chane of silicon diode of suitable cap for DG set of cap 25 KVA to 62.5 KVA , commissioning & testing on full load complete all as specified and as directed .

S&F in replacement of four pole offload changeover switch 100 Amps, 415 Volts with sheet steel enclosure including disconnecting existing cable connection and reconnecting after fixing the same as directed by Engineer-in-Charge complete all as specified and as directed.

S&F in replacement of four pole onload/offload changeover switch 200 Amps, 415 Volts with sheet steel enclosure including disconnecting existing cable connection and reconnecting after fixing the same as directed by Engineer-in-Charge complete all as specified and as directed.

M & L for Shifting to DG set of any Cap and any Size From office complex to E/M installation & back to office after complition of requirement ( approx 90Km to 120 Km) and commissioning ,testing after refixing the same with connecting acessories as required at site as specified and as directed by Enge -in-charge. Transporation deemed to included in quoted rates of this item.

M&L for Earthing to equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6 mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to transformer / GOD / Panel / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed.

M&L for complete servicing of 7.5 KVADG set of any make and type to made functional replacing unserviceable spare parts, old oil filer, fuel filter , air cleaner filter element including drain out old engine oil (lubricants) and coolant including commissioning & testing on full load upto satisfaction after repair/ replacement at unserviceable parts/filter engine oil/ coolant etc. complete all as specified and as directed. (Note:- Replaced Spare parts/ engine oil/ coolant shall be measured & paid under appropriate items of Sch 'A')

M&L for complete servicing including dismantling of engine of 5 KVA DG set of any make & type by strip opening and repairing of diesel engine gen set with following repairs/ replacement of worn out spare parts, old oil filer, old fuel filter , old air cleaner filter element including drain out old engine oil (lubricants), coolants complete including commissioning testing on full load and entire satisfication of Engineer-in-charge after complete repairing (Testing shall be carried out for 08 hrs continious and diesel for testing shall be supplied by the deptt free for testing). (Note:- Spare parts shall be measured & paid as supply only under appropriate items of Sch 'A') (a) Valve set cutting and fixing of valve guide. (b) Fixing of cylinder linner. (c) Cylinder block liner bearing and threading of existing bores. (d) Fixing of piston ring complete. (e) Repair to cylinder block injector sleeves including fixing and testing complete.

M&L for dismantling unservicable Start Key & Push Battan of 25 KVA DG Set to 63.5 KVA and replacement with new Start Key complete all as specified and as directed. Note: Old material retreived from above items will be property of the MES and will be deposited to MES store North camp as directed.