Military Engineer Services Tender

M&L for demolition concrete of any description (Zafari Wall) and in any position not otherwise specifically provided for cement concrete and removing debris outside MD land complete all as specified and as directed.

Material & labour for squared rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc.5 km and and depositing complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in floor 70mm thick finished even and smooth without using extra cement complete all as specified and directed.

M&L for glass dividing strips, 3.0mm thick and 28mm wide, inserted and laid in position conform to design and pattern complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with on stone masonry block masonry surfaces or surface other than fair face of brickwork, including finish even and smooth surfaces using without extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of Walls and applying two coats of cement base paint, including cleaning of windows, doors & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed .

M&L for stone jalli of 40-50mm thick in any size and in any shape/ design as approved with asthetic view including pillars/frames/posts (thumbly) complete all as specified and directed. NOTE:- Measurment shall be carried out including Frame/Posts.

M&L painting lines, dashes, arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow complete all as specified and directed.

Supply and fixing steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including applying two coats of aluminium paint over and including one coat of primer including zebra painting in blue and white colour with width of 30 cm in alternate upto 1.5 m height from ground level complete all as specified and directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection all as specified and directed.

S&F of PVC junction box for street light central with linked door control including 6 AMP MCB SP with aluminium bus bar TPN for controlling the street lights complete with pole mounting type of size with 300x300x150mm including MS clamp of required size with bolts, nuts and washer complete all fixed on poles/walls complete all as specified and directed.

S&F FRLS PVC insulated flexible copper wire 2.5 sqmm 2 core fixed on wall/ceiling/poles with necessary fittings complete all as specified and directed.

S&F outdoor type LT Feeder Pillar box (Kiosk) of size not less than (L) 60 cm x (W) 45 cm x (H) 45cm made out of 3 mm thick CRCA sheet (CPRI approved) with openable front door including locking arrangement, with and including Copper Busbar 200 amps rating and one MCCB 40 Amps, 04 pole, 16 KA thermal magnetic adjustable type for incoming and fixed on angle iron 40x40x6mm frame of suitable size and embedded in PCC plinth 45x45x60mm made of PCC 1:4:8 type D-1 using 20 mm graded stone aggregate complete all as specified and directed.

Supply, laying, testing and commisioning electric power cables with stranded aluminium conductor of size 10 sq mm 2 core XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured (heavy duty) 1100 Volts grade complete all as specified and directed.

Supply, laying, testing and commisioning electric power cables with stranded aluminium conductor of size 16 sq mm 4 core XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured (heavy duty) 1100 Volts grade complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for laying of cables, errection of poles, struts/stays etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover, Class LV, Type-I, Flat size 250 mm x 150 mm x 40 mm complete all as specified and directed.

Material and labour for stone slab/patti, 40 to 50mm thick, rough dressed, Jodhpur stone slab cover in trenches for protection of cables, 25cm to 35cm wide and 80 cm long, laid dry abutting each other with gap between adjacent slab not exceeding 10mm over sand cushioning complete all as specified and directed.

Supply and fix Cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts bolts washer, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and including applying two coats of synthetic enamel paint over and including one coat of primer complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m but not exc 3.0m in depth for foundation etc or for laying of cables, errection of poles, struts/stays etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete for pole etc complete as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in foundations, filling and mass concrete for pole etc complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and galvanised iron earth strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, precast RCC 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with PCC frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm mm bore medium grade GI protection pipe, test point etc complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

S&F sheet metal enclosure outdoor type 3.15mm thick duly powder coated including and suitable for accommodate 15 Amp sockets Qty-03 and 5 Amps Qty-03 including hylum sheet and necessary connection including grouting in PCC 1:2:4 fixed on angle 25X 4 mm thick complete all as specified and directed.