Military Engineer Services Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 76,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_702338_2Tender No
8401/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed
125
53
6625
... More
Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar and precast concrete masonry and removal complete all as specified & directed
9.5
10
95
... More
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.
12
11
132
... More
Taking down Chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed.
16
1
20
... More
M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement and joints of panel should be filled by bituminous mastic and sand in proportion 1:3 (one part of bitumen and three part of sand) complete all as specified and directed.
25
-
-
... More
M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cills, coping, steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm height kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating complete all as specified and as directed
0.5
100
50
... More
M&L PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed
1
53
53
... More
Providing PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in landing, cover slabs (for manholes etc) chajjas, water troughs, mangers, shelves and similar article with plain faces complete all as specified and directed.
0.38
10
3.8
... More
Providing PCC (1:2:4), type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamferred on edges complete all as specified and directed.
0.28
1
0.35000000000000003
... More
M&L rendering 15 mm thick cement mortar (1:4) including WPC @ 3% by weight of cement on stone/brick masonry finished even and smooth complete all as specified and directed.
Note : (i) Quoted rate is deemed to be inclusive for work at any height and location including cost of scaffolding and all other equipments reqd to execute the work. (ii) Water proofing compound shall be measured and paid separately under relevant item of this schedule.
500
-
-
... More
M&L for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick/stone work or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.
150
100
15000
... More
Supply only liquid water profing compound as per IS 2645.
20
53
1060
... More
M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even as per manufacturer instructions complete all as specified and directed
120
10
1200
... More
Taking down carefully existing bitumen tarfelt including plaster of any description over the surfaces of roof, terraces including flashing and junction of parapets/curve walls etc and removing off the rubbish and deposting where directed complete all as specified and directeed
340
11
3740
... More
M&L water proofing treatment to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a) 20 mm thick plaster on RCC roof slab with CM (1:3) for surface levelling including water proofing compound @ 3% by weight of cement shall be carried out (b) Applying Bituminous primer 85/25 @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (c) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.5 Kgs/Sqm and upper side of membrane thermally insulated with white mineral gravel finish, unifirmly embeded during manufacturing process shall only be used, it shall be laid by torch application, side overlap should be 75mm and end shall be 100mm. (d) Applying two coats of heat resistance paint over membrane complete all as per manufacturers instruction. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside parapet in groove. The same shall be finished by a membrane flashing complete all as specified and directed.
340
1
425
... More
M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement.
75
-
-
... More
M&L taking down and removal of loose / disintegrated old concrete up to 50mm depth/ plaster and cleaning all loose dust washing with water and epoxy bondsmaterilas of pidilite/Dr fixit with new cement plaster /polymer modified plaster/concrete /screed concrete with old surface etc complete all as specified and directed.
15
100
1500
... More
M&L for 15mm thick rendering with readymade polymer modified mortar (as epoxy based repair material) and finish the surface even and smooth complete all as specified and directed.
15
53
795
... More
M&L applying two coats of 2 component zinc based epoxy rust preventer on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete.
Note : Qty of zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.
150
10
1500
... More
M&L glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm /300mm x 600mm x 7 mm thick laid over with and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.
100
1
125
... More
M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over and including 20 mm rendering or beddding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.
30
-
-
... More
M&L vitrified ceramic tiles, double charged, 8-10mm thick (square/rectangular), polished, coloured, area of each tile not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
195
100
19500
... More
All as per item ser No 25 above but as in skirting/dado including cement mortar rendering/screeding 1:4 10mm thick.
22
53
1166
... More
M&L glazed coloured ceramic tiles in vertical surface 300mm x 400mm x 7mm thick laid over with and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.
40
10
400
... More
M&L for 600mm x 300mm x 7-8mm thick Matte finish exterior grade wall tiles set laid over with and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed. Make : Somany, RAK, Jonson and Equivellent. Note : Design and pattern of tiles as directed by Engr in Charge.
45
11
495
... More
M&L Vitrified Tiles (dark shade/ double charged / ultra charged) 8-10mm thick (square/rectangular), polished, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
110
1
137.5
... More
M&L machine cut Green Marble 15-18mm thick as in riser of steps, skirting, dado and pillar set over 10 mm thick rendering in CM (1:3) and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified and directed.
10
-
-
... More
M&L 12mm thick vitrified exterior grade textured finished tiles (FOR PARKING/PORCH etc) of size (30cmx30cm/40cmx40cm) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over with and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.
50
100
5000
... More
M&L Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
5
53
265
... More
M&L 25mm to 40mm thick unpolished cuduppah stone slab as in vertical support for cooking platform and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified and directed
5
10
50
... More
M&L 18-20 mm thick Granite(of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the likes; in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over with and including 15 mm thick screed bed or bedding layer in CM (1:3), including grinding of edges to curved surface finish complete all as specified and directed.
7.5
1
9.375
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative tpe flush door shutter of size 30mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screwed withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum comprehensive strength of 50 N/mm2, modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete as per direction of Engineer-in-Charge.
30
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X100mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS hold fast/ugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). →
Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra
payment on this account shall be made
95
100
9500
... More
All as per item ser No 36 above but frame size 65 x 125mm.
11
53
583
... More
S&F Gauzed shutter made of stainless steel framed work as in door frames made hallow/square/rectangular/circular section and other covering door to be prepared for handing or sliding with including either hooks, fittings, mortoc lock and hanging also fastening and fixing, necessary arrangements for fixing of wiremesh, necessary bolting including welding complete. Wire gauge will be measured and paid separately
150
10
1500
... More
S&F Aluminium windows made of 1.59 thick powder coated (thickness of powder coating not less than 50 micron) as per aluminium section of size given below . Aluminium window will be of double shutter of one glass/ one wire gauge shutters including frame with Aluminium U channel all necessary accessories jointing cleats , glazing clips, rubber neoprene packing, for fixing glass/ wire gauge, aluminium handles and tower bolt 2 Nos 100 mm ‘D’ Type in each door, 2 Nos 100 mm aluminium hinges including necessary steel screws complete all as specified and directed by Engr-in-charge. The size of different aluminium section to be used is as under (a) Outer Frame 125X45X2 mm thick (b)shutter frame section size 44X44X1.59 mm thick for glass and 44x22x1.59mm for wire gauge Note: Rates quoted are inclusive all fittings and fixtures. Glass and wire gauge will be paid separately in respective items.
27
11
297
... More
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples to wooden/steel frames with beading complete all as specified & directed.
20
1
25
... More
S&F sheet glass, ordinary quality 4.80 mm thick fixed with rubber beading and clips size of glass n.exc 2 sqm in each pane complete all as specified & directed.
21
-
-
... More
S&F framed work such as grills, grating etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron door ladder, framed balusters, walk ways, railing, framed work or water tanks & similar work conforming to Fe-290 Gde E-165.
725
100
72500
... More
S&F in repairs vitreous china squatting pan of Orissa pattern size 580mm x 440mm white with integral foot rests excluding flushing cistern and flush pipe complete including provision of lime concrete bedding.
2
53
106
... More
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed. Make: JAQUAR/CERA/HINDWARE
2
10
20
... More
S&F in repair PVC flushing cistern low level 10 ltr capacity with inlet ball valve float and handle syphonic action type including brackets and flush pipe of polythene of low or high density. Make : JAQUAR/CERA/HINDWARE
4
1
5
... More
S&F in repair 15mm dia bib tap cast coper alloy chromium plated with butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified & as directed.
2
-
-
... More
S&F in repair 15mm dia bib tap cast coper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified & as directed.
Make : JAQUAR Cat part No OPP-15037PM or equivalent of HINDWARE/CERA
10
100
1000
... More
S&F in repairs Stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make : JAQUAR Cat part No OPP-15053PM or equivalent like HINDWARE /CERA
20
53
1060
... More
S&F in repair shower rose (fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.
Make : JAQUAR cat part No OHS-CHR-1663 or equivalent of HINDWARE/CERA
4
10
40
... More
S&F in repairs PVC Mirror cabinet of size 400 x 500 x 140 mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted.
Make : Prayag cat No 554 or equivalent as approved by GE.
4
11
44
... More
S&F in repairs single lever wall mixer 3-in-1 with provision for both hand shower and overhead shower complet with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead shower. Make : JAQUAR cat part No OPP-CHR-15125PM or equivalent.
4
1
5
... More
S&F in repairs glass corner shelf set of three (Cat Part No T6010A1 of make – Parryware or equivalent of Jaquar/Marc) complete all as specified & as directed.
4
-
-
... More
S&F in repair 800mmx600mmx5mm thick bevelled edge looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood including framing and fixed to wooden plugs with chromium plated screws & cup washers & fixed complete all as specified & as directed.
2
100
200
... More
S&F in repairs vitreous china wash basin white of size 550 mm x400 mm with padestal stand including 32 mm CP waste coupling & PVC flexible waste pipe of min 60 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed. Make : JAQUAR/CERA/HINDWARE
2
53
106
... More
S&F in repair vitreous china wash basin oval type (Counter top) white of size 550mmx400mm fixed with granite etc including 32mm dia CP brass waste coupling fitting and union complete all as specified and as directed Note: pillar tap shall be measured as supply only under respective items.
2
10
20
... More
S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste coupling 32 mm size with aerator complete cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts screwed for iron pipes of 15 mm bore complete all as specified & as directed. Make :Jaquar, Cera, Johnson or equivalent as approved by GE.
Make : JAQUAR Cat part No OPP-15011BPM equivalent of HINDWARE/CERA
4
1
5
... More
S&F in repair waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms/40mm-60 gms) all as directed fixed in repair.
2
-
-
... More
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20mm bore pipe.
50
100
5000
... More
Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 20mm dia.
20
53
1060
... More
S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 20mm dia complete to walls and ceiling or laid in floors.
30
10
300
... More
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore pipe.
60
11
660
... More
Refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) bore of pipe in 15mm dia.
20
1
25
... More
S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors.
40
-
-
... More
S&F in repairs sink double bowl made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing in granite bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, including taking down old unserviceable sink complete all as specified and directed.
2
100
200
... More
S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
4
53
212
... More
S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of existing tank complete all as specified in SSR Part I and removing to store with and including 20mm bore float valve with rod and ball complete all as specified and directed.
2
10
20
... More
S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl S&F 20mm float valve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting and including dismantling of tank complete all as specified specified and directed by the Engineer-in-Charge.
2
1
2.5
... More
S&F in repair ball valve brass high pressure with polythene float and fly nut screwed on iron pipe and fixed 20 mm bore of pipe complete all as specified and directed
2
-
-
... More
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed
8
100
800
... More
S&F in repair sheet glass self assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide chromium plated bracket guard and railing 60cm long complete all as specified and directed
7
53
371
... More
S&F in repair Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed
6
10
60
... More
S&F in repair 75mm Floor Drainer with Collar and Cockroach Trap/Jali with or without waste hole complete all as specified and directed
12
11
132
... More
S&F in repair Brass chromium plated soap dish complete all as specified and directed
6
1
7.5
... More
S&F in repair Brass chromium plated towel ring incl a pair of CP brass bracket complete all as specified and directed
4
-
-
... More
S&F in repair Brass chromium plated fancy type toilet paper holder complete all as specified and directed
4
100
400
... More
Cutting Chases exc 10 cm but n.exc 20cm in girth in brick/stone wall for fixing of PVC Pipe/GI pipe of 15 & 20 mm bore (concealed in wall) including making good disturbed surface in CM (1:6) and to match with the existing surfaces complete all as specified and directed.
40
53
2120
... More
S&F in repair PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed.
8
10
80
... More
S&F in repair PVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed.
5
1
6.25
... More
S&F in repair PVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed.
25.6
-
-
... More
S&F in repair PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed.
12.8
100
1280
... More
S&F in repair UPVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified and directed.
10
53
530
... More
S&F in repair UPVC (SWR) bend 75mm bore of any radius complete all as specified and directed.
10
10
100
... More
S&F in repair UPVC (SWR) bend 75mm bore of any radius with access door complete all as specified and directed.
4
11
44
... More
S&F in repair UPVC (SWR) bend 110mm bore of any radius complete all as specified and directed.
2
1
2.5
... More
S&F in repair UPVC (SWR) bend 110mm bore of any radius with access door complete all as specified and directed.
2
-
-
... More
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 110 mm bore with access door complete all as specified and directed.
2
100
200
... More
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 110 mm bore with access door complete all as specified and directed.
2
53
106
... More
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 75 mm bore with access door complete all as specified and directed.
2
10
20
... More
S&F in repair PVC (SWR) vent cowl 110 mm complete all as specified and directed.
2
1
2.5
... More
S & F for Pipe Supporting Clamping - Single Pipe of dia 3" (75 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.
4
-
-
... More
S&F for Pipe Supporting Clamping - 2 Nos for 20mm & 2 Nos for 15mm bore GI pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos.
Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE. complete all as specified and directed
10
100
1000
... More
S & F for Pipe Supporting Clamping - Single Pipe of dia 4" (110 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 4" (110 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos.
Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.
8
53
424
... More
Demolition and breaking up drain pipes (Salt glazed stone ware, AC, or Reinforced concrete) or 100mm dia set in cement mortar including PCC bed to drain pipe, packing under & haunching against the sides of drain pipes complete all as specified & directed
4
10
40
... More
S&F 75mm thick steel fibre reinforced concrete (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.
2
11
22
... More
M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars including demolition and breaking up old existing pipe all as specified & as directed.
10
1
12.5
... More
M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone agg) as bed to drain pipe including in packing under and haunhinig against sides of pipes after they are laid and tested in complete all as specified and directed for 150 mm dia pipes.
19
-
-
... More
M&L cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe.
2
100
200
... More
S&F mild steel butt hinges medium weight cold rolled of size 100mm, ISI marked complete all as specified and directed.
68
53
3604
... More
S&F SS sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified.
14
10
140
... More
S&F 200 mm long SS barrel tower bolts of extruded section and fixed complete all as specified & directed
86
1
107.5
... More
S&F SS handles 150mm size fabricated type, ISI marked complete all as specified & directed
116
-
-
... More
S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, with vulcanised rubber piece fixed in floor as directed
14
100
1400
... More
S&F in repair stainless steel plate rack out of 1.00 mm thick sheet of size 900 x 750 mm and depth of shelves 230 mm with partition for small /large plates made out of stainless steel 24 gauge all as per sample to be hanged on wall by the help of steel screws grouted in walls with rawl plug design as approved by GE/Kept in GE Office
2
53
106
... More
M&L pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet,12mm dia M S rod for locking, two nos chromium plated handle and one mortise pattern lock including two coats of spary painting over a coat of shop primer complete all as shown on drg no TD/2004/29 sheet no 1/3 to 3/3 complete all as specified and directed
12
10
120
... More
S&F in repair harrison rails, mild steel, chromium plated curtain rod with fixing bracket, stops, rollers etc complete all as specified and directed.
5
11
55
... More
S&F in repairs Stainless Steel drapery rod of 25 mm inner dia (in length as directed) of approved colour with & including matching finials at both ends and pair of SS brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm complete all as specified and directed.
40
1
50
... More
M&L for TMT bars 10mm dia and over cut to length to shape required inclding cranking, bending, spirally or hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
25
-
-
... More
All as per ser item No 107.00 but 6mm to 8mm dia TMT bars.
8
100
800
... More
Excavation in trenches n.exc. 1.50 Mtr width and n.exc. 1.50 Mtr in depth, manholes etc as well as n exc 10 sqmm on plan area and getting out in soft/loose soil complete all as specified and directed.
1
53
53
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed.
0.5
10
5
... More
Removing excavated soil to a distance exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.
1
1
1.25
... More
M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM (1:4) as in half brick thick wall complete all as specified and as directed.
5
-
-
... More
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m radius mean built in CM (1:6) complete all as specified and as directed.
1
100
100
... More
M&L framed work as in doors or gates or tank cage, angle or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and including all necessary nuts and bolts and welding required hanging also fastening and fixing complete confirming Fe-290 (Gde-E165) complete all as specified and as directed.
80
53
4240
... More
S&F welded steel wire febric n.exc 4kg/Sqm complete to wood or steel membrane complete all as specified and directed.
40
10
400
... More
Treatment of sunken portion is as follows :-
(a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls. (d) Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f) 32 mm dia GI spout shall be provided to drain out leakage, if any.
6
11
66
... More
M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified..
15
1
18.75
... More
S&F for preparation of new steel surface/old untreated of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
15
-
-
... More
M&L for preparing newly plastered surfaces & applying two coats of oil emulsion distempering(OBD) over and including a coat of white wall care putty 1 mm thick over a coat of primer on walls
150
100
15000
... More
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty 1mm thick complete.over a coat of primer complete all as specified and directed.
400
53
21200
... More
M&L for preparation of old surrfaces of ceiling and applying two coats of oil bound distemper on ceiling complete all as specified and directed
290
10
2900
... More
Material and labour for preparation of newly plaster surface of wall & applying two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint . Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding complete all as specified and directed.
770
1
962.5
... More
M & L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint. complete all as specified and as directed by Engr- in - Charge.
3
-
-
... More
M&L for form work to soffits of suspended slabs such as roof slabs etc for rough finished concrete surface complete all as specified and directed.
2
100
200
... More
M&L for form work to Sides for slabs and SIdes of RCC/PCC bands in walls, horizontal or sloping and Similar work exc 10 cm but n exc 20 cm wide for fair finished concrete surface complete all as specified and directed.
2
53
106
... More
M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded crushed stone aggregate as in roof, floor, slabs supported on walls complete all as specified and directed
0.35
10
3.5
... More
S&F Stainless steel kitchen busket including cutlary tray, plate rack, utensil tray etc for modular kitchen of any size and shape with all accessories i.e. SS sliding Channel 304 Grade, SS screws etc as approved fixing in position including necessary drilling, PVC cap, self threading screws complete all as specified and directed.
30
11
330
... More
Supplying and fixing in repair factory made kitchen cabinets having 300mm depth made of 18 mm thick PVC Celluka ply having desity 600 Kg.cbm density with prelaminated sheet on one side and other side balancing white including shutter. The PVC sheet shall be cut in desired shape and size (LXB) put together and jointed with necessary adhesive and screws where required. All edges shall be coversa with edge bonding tape of same colour of the cabinate. The cabinate will be fixed on wall above kitchen counter with 4X fastener and fixing lugs complete all as specified and directed by engr inchanrge each shutter will be provided with SS oneno handle 75mm, continuous CP aipno hinges, and magnetic catcher. Note (i) The Quoted rated are included all fittings and fixtures. (ii) The measurement of caninets will be made and paid for front elevation only complete all as specified and directed.
3
1
3.75
... More
Supplying and fixing PVC shutter for kitchen cabinets and trolly shutters made of 18 mm thick PVC Celluka ply having desity 600 Kg.cbm density with prelaminated sheet on one side and other side balancing white including shutter. The PVC sheet shall be cut in desired shape and size put together and jointed with necessary adhesive and screws where required. All edges shall be covers with edge bonding tape of same colour. The shutters will be fixed below kitchen counter with necessary fittings and fixtures complete all as specified and directed by engr in charge each shutter will be provided with SS piano handle 75mm, continuous CP piano hinges and magbetic catcher Note : the quoted rated are included all fittings and fixtures complete all as specified and directed
10
-
-
... More
M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floors complete all as specified and directed.
100
100
10000
... More
M&L for interlocking tiles 60 mm thick (M-35) having compressive strength not less than 35N/MM2 with grey cement and pigment over & including 25 mm thick sand layer complete all as specified and directed
100
53
5300
... More
M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed
35
10
350
... More
M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed
115
1
143.75
... More
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
30
-
-
... More
M&L PCC 40mm thick 1:2:4 type B0 (using 12.5mm graded aggregate) as in floor as in levelling levelling course
110
100
11000
... More
S & F Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with
selected quality glass. (Note: The unit rate quoted by contractor excludes
cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) all as specified and directed by Engr-in-Charge.
8
53
424
... More
Material & Labour for providing and fixing stainless steel (Grade 304), ornamental gate, railing made of hollow tubes, channels, plates etc., including laser cutting, welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including laser cutting and fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc all as spd and as directed by Engr-in- Charge.
100
10
1000
... More
S&F UPVC Partition / glass caldding wall made out UPVC frame work made using UPVC section of size 60 x 60X1.8 thick mm and Mullion Size 60X78X1.8 mm Rainforced with necessary MS pipe .UPVC frame work divided in to squre n exe 1 sqm . 8 mm thick toughned glass to placed in frame with necessary EPDM rubber/ glazing clipe etc required to fit the glass complete all as specified and directed by GE / Engr in charge. Note: The quoted rate are including rate of galss and fittings and fixturers required for fixing the frame with wall/ MS pipe etc
130
11
1430
... More
Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock complete all as specified and directed.
18
1
22.5
... More
M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
120
-
-
... More
Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.
120
100
12000
... More
M & L for Cement concrete in foundations, filling and mass concrete type B2 (1:2:4) (Using 40mm Graded aggregates) all as specified and directed.
6
53
318
... More
Dismantling stone slab of any description or thickness in floors, approns etc, laid bedded & pointed in any mortar complete all as specified and directed.
6
10
60
... More
S&F for glossy finished chequered cement concrete tiles 30cmx30cmx20mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed.
60
1
75
... More
Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc incl dismentling of fittings complete all as specified and directed.
139
-
-
... More
M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke and halogen (FRLSH) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLSH PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch including cutting chasis in stone/brick wall as required on site all as specified & directed.
62
100
6200
... More
All as per item No. 146.00 here-in-before but for one fan point controlled by one switch and regulator
20
53
1060
... More
All as per item No 146.00 here-in-before but for one bell/buzzer point controlled by one bell push
2
10
20
... More
All as per item No. 146.00 here-in-before but for one light point controlled two ,two way switch
1
11
11
... More
All as per serial item No. 146.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
16
1
20
... More
All as per serial item No. 146.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
20
-
-
... More
All as per serial item No. 146.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour.
14
100
1400
... More
All as per serial item No. 146.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour.
4
53
212
... More
S&F switch flush type single pole one way, 5/6 amp 250 Volts , Module type.
118
10
1180
... More
S&F switch fulsh type , single pole, two way 5 Amps 230 Volts, modular type
2
1
2.5
... More
S&F switch flush type single pole one way, 15/16 amp 250 Volts , Module type.
14
-
-
... More
S&F socket outlet for 2& 3 pin 6 amp flush type 240 Volts ,two Module type.
36
100
3600
... More
S&F socket outlet for 2 in 1, 3 pin 6 & 16 amp, 240 Volts , two Module type.
14
53
742
... More
S&F modular bell push 5 Amps 240 Volt, One Modular type
2
10
20
... More
S&F Bell multi music type AC 230 volts single pole , modular type
2
11
22
... More
S&F modular metal flush box 1 Module with PVC white cover plate with frame 1 Module.
2
1
2.5
... More
S&F modular metal flush box 2 Module with PVC white cover plate with frame 2 Module.
4
-
-
... More
S&F modular metal flush box 3 Module with PVC white cover plate with frame 3 Module.
36
100
3600
... More
S&F modular metal flush box 4 Module with PVC white cover plate with frame 4 Module.
10
53
530
... More
S&F modular metal flush box 6 Module with PVC white cover plate with frame 6 Module.
6
10
60
... More
S&F modular metal flush box 8 Module with PVC white cover plate with frame 8 Module.
6
1
7.5
... More
Supply and fixing ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.
95
-
-
... More
Supply and fix LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffisure duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver. it should have rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 K CRI >80, thd <10 and PF>0.95 complete all as specified and directed make - Crompton Cat Part CIS-305-40-57-SL-DP-NWH, Philips Cat part BN308C LED20S-6500 L120 PSU WH, Havells Cat Part STOUTPLUS600BS20WLED840SPCWH
50
100
5000
... More
Supply and fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.
10
53
530
... More
Supply and Fixing 20 watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours.
Make : - Havells/Philips/Bajaj
10
10
100
... More
Supply and fixing sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts.
4
11
44
... More
Supply and fixing Vertical sheet metal enclosures double door type , suitable for fixing MCB, TPN with 200 amps rated bus bar , 4 way. 415 Volts with inbuilt MCCB 4 pole 63 Amp,16 KA
1
1
1.25
... More
S & F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as pecified & directed.
8
-
-
... More
S & F MCB SPN 63 Amp, Single pole & neutral,240 Volt complete all as pecified & directed.
2
100
200
... More
S & F MCB 6-40 Amp, single pole 240 Volt complete all as pecified & directed.
28
53
1484
... More
Supply & fixing AC box single pole and neutral enclosure with a two pin and socket complete with one single pole MCB 240 volts, 32 Amps
4
10
40
... More
supply and fix exhaust fan metal body AC single phase 230/240 V of size 300 mm sweep with louver including making suitable opening/hole in wall all as specified and directed by ebgineer-in-charge
4
1
5
... More
Supply and fix ceiling fan complete with electronic type regulator , copper winding and accessories 230v 1200mm sweep BEE 5 star rated with brushless direct current motor (BLDC) including taking down old unserviceable ceiling fan complete all as specified and directed by engineer-in-charge.
14
-
-
... More
S&F sub main wiring on and including passing through PVC conduit in concealed (including cutting chasis in stone/brick wall) 1100 Volts grade with PVC flexible cable copper conductor cable fire resistant low smoke and halogen (FRLSH) unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)
100
100
10000
... More
Supplying, laying, jointing, testing and commisioning of size 3.5 core 50 Sqmm LT under ground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall complete all as specified and directed.
Note :- Exacavation and earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid seprately under respective items of the BOQ'.
44
53
2332
... More
Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil.
6.61
10
66.10000000000001
... More
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.
5
11
55
... More
Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and directed.
1.94
1
2.425
... More
M/L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.
0.16
-
-
... More
M&L for dry sand and punning for cushioning to under ground cable complete all as specified and directed.
Note :- For the purpose of payment only punned thickness shall be measured.
1.62
100
162
... More
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact
and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including all as necessary fitting accessories complete all as specified and directed. Make : Philips/Havells/Crompton
2
53
106
... More
Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,
charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.
Note : - Quoted rate shall be deemed to include for earth wire with protection pipe up to 7.5 meter length.
4
10
40
... More
Supply and fixing in repair 25mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion as existing and including taking down of old unserviciable pipe of the following sizes :-
Note :-excavation earth work will be measured and paid saperatly.
16
1
20
... More
All as per Srl item No 188.00 but 20 mm bore
16
-
-
... More
All as per Srl item No 188.00 but 15 mm bore
16
100
1600
... More
M/L for GI pipe ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of 40 mm bore complete all as specified and directed.
6
1
6
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%