Local Self Government Department Tender

Supply & Installation of On Line BOD/COD/TSS/PH in-situ based Analyzer with panel for S.T.P effluent Measurement items UV- VIS Spectrometry Double beam with entire spectrum scanning 200 – 720 nm / 190- 750nm wave lengths along with 256 unique pixel diode. •MOC of BOD/COD/TSS sensor -Titanium3.7 / SS316L or better • Cleaning facility.-ultrasonic cleaning or Air pressure Cleaning• Accuracy of BOD/COD/TSS sensor- +/-3% of the measured value • Light Source: Xenon Flash LampFollowing measuring ranges are required :• COD: 0-700 mg/lBOD: 0-400 mg/l TSS: 0-600 mg/lPh range - 0 to 14 • MOC of ph sensor-Stainless Steel316 or better •Ph Accuracy +/- 0.2% •protection type : IP 68 for both the Sensor and Cable (Cable lengthas per site requirement)• Controller/Display- Housing Material – Non corrosive e.g.Acrylonitrile-Styrene- Acryloester polymer or better• Protection Rating IP 67 Controller/display cabin boxshould be IP66 Grade with lock & key SS304 Grade MOC

Data Logger (including Data transmission to CPCB and RSPCB), Internet for DATA transmission is in bidders scope. •The communication to the system should be two way. • The data should be received at a central location and should be displayed there in real-time in graphical and tabular format. • Operating Temperature 0 to 55 °C • Protection Surge protection on sensor inputs, over voltage and reverse polarity protection on Power Input • Storage 256MB (Industrial microSD) • Interface(s) 2 x EIA RS485, 1 x Rs232, 8 x 4-20mA (±1% FS) • USB Host 1 (USB 2.0) • Voltage 9-24 VDC ± 10% (Nominal 12VDC) Power 5W (peak) • Statistical data analysis (customizable) for average, min., max., diurnal variation. •Auto report and, auto mail generation etc. • Comparison of parameters of different locations in user selectable time formats i.e. in graphical and tabular formats compatible to MS Excel, MS Word, *.txt etc. Including Mandatory fee for DATA transmission to CPCB, RSPCB & MBL server (whenever payable).

Ultrasonic open channel flow meter with shall comprise of Flow sensor / transducer, flow transmitter, digital level indicator / remote indicator, control unit • Operating Temperature: 0 to 50°C. • Safety: Explosion Proof or Intrinsically Safe. • Measuring Principal: Ultrasonic. • Communication Protocol: Open Protocol like MODBUS, PROFIBUS, HART, etc. • Analog Output: Isolated 4-20mA. • Relay Contacts: Minimum of 3 SPDT contacts. • Accuracy: ± 0.25% of measured value or better. • Output-. 4 - 20 mA •Protection a.) Sensor: IP-68. b.) Transmitter / Controller: IP-66 (NEMA 4X). • Display: LCD with LED backlighting 130.