Indian Oil Corporation Limited Tender

Surface preparation of Roof & Shell: Area includes complete roof, wind girder with handrails/supports, shell, primary wind girder and 1.8 m from top of shell inside, sprinkler rings, Tank shell, secondary wind girder, shell nozzles, etc. The scope of work of the contractor includes supply of paint, tools & tackcles,laburs, all equipments etc. Surface preparation using using hand tool cleaning including removal of oil, grease and other contaminants by solvent cleaning followed by removal of defective paint, loose mill scale, loose rust, loose paint, weld flux, slag from the metallic surfaces, by hand chipping, hand brushing, hand scrappers / chisels, steel wools, final cleaning with High pressure ( 10000 PSI ) low TDS fresh soft water jet cleaning including water supply and drying with compressed air as per the specifications and directions of Site Engineer. Prepared surface shall conform to WJ-4 as per NACE no.5/SSPC SP-12 standards.

"Painting : Supply and application of paint on roof, shell, structure primary wind girder and 1.8 m from top of shell inside, sprinkler rings, Tank shell, secondary wind girder, shell nozzles etc.The scope of work of the contractor includes supply of paint, tools & tackles,labours,all equipments etc.Painting system shall be as follows: FIRST COAT: surface tolerant epoxy primer (greater than 80% solid by vol.) minimum 100 micron per coat & 2nd coat: acrylic iso cyanate aliphatic Polyurethane coat (55% min. solid byvol.) with coat 50 microns DFT (min) by airless spray application (Gloss retention minimum 80 % under 1000 hours of QUV A.Colour will be as per SIC/EIC instructions.Supply and fitting of double steel scaffoldings or Manlift (separate SOR item) in line with tender and safety clauses.

Radium sticker(Monogram & lettter writing) background: Reflective radium sticker printing (background sticker) and apply including pasting and fixing with supply of all manpower, equipments, tools, tackles, consumables, non-consumables, scaffolding/manlift (separate SOR item) working at any height etc. as per instruction of EIC/ Site Engineer to complete work in all respects.