Forest Department Tender

BSR Item 12.35.7 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing

BSR Item 13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand)

BSR Item 12.22 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete BSR Item 12.22.1 New Plastered Surface (three or more coats) =150 BSR Item 12.22.2 Old Plastered Surface (two or more coats)=450

BSR Item 12.22.2 Old Plastered Surface (two or more coats)=450

BSR Item 5.2.2 Brick work with F.P.S. bricks of class designation 75in supwrstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 No L W H 1 46.00 0.23 0.90

BSR Item 12.2.1 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :25 mm thick No L H 1 46.00 0.90

BSR Items4.10.2 Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for suspended floors, roofs, landing, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, linte, beam, plinth beam etc. suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed [lates, anchor blocks, sills chajjas lintel, beam, plinth beam etc. No L W Roof 1 12.2 12.2

BSR Items 4.3 Providing and laying in position specified grade of cement concrete for RCC structural elements up to floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 and making good the joints and cost of plastizers ( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15 *, landings, balconies, shelves, chhajjas, lintels, bands, plain windows sills, stairrcases and spiral staircases etc. M20 graade nominal mix design No L W H Roof 1 12.2 12.3 0.15

BSR Items 4.13.2 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of vinding wire) all complete up to floor five level.

BSR Items 15.25.2 Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 125x100 mm.

BSR Itmes 7.21.5 providing and fixing 1st quqlity standred white, gray. Ivory, fume red brown, light blue and light shades caramic glazed vitrified tiles with water absortion less than or equal to 0.08% conforming to IS: 15622 in floors, steps etc. laid on a bed of neat cement slurry finished with flush poiniting in the tile complete( excluding the cost of cement plaster on walls and piller

BSR Itmes 7.22.3 Providinf and fixing 1st quality MAT & Glossy finished ceramic tile conforming to IS:13755 and IS:15622colour such as white gray ivory fume red brown light green light blue and other light shades in floors, steps, pillara etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the compete ( including the cost of cement mortar bed 1:4) LB=8.50

BSR Itmes 13.4.2 Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 5 mm No L W Window 2 1.2 1.2 2 0.9 1.2 4 1.8 1.2

BSR Itmes 8.13.2.3 Providing and fixing external grade board solid coae single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fitting complete as per annexure'A': Decorative teak veneer both side No L W Door 5 2.1 1.05

BSR Itmes 16.18 Providing and fixing to exisiting door frames 24mm thick factory made PVC door shutters made of stiles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2mm+/- 0.2 mm with inbuilt edging on both sides. The stiles and rails mitred and joined at the corners by means of M.S. galvanized/ plastic brackets of size 75x220mm having wall thickness 1.0mm+/- 0.1mm and stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S. tube of size 20x20mm and 1mm+/-0.1mm wall thickness. The lock rail made up of 'H' section ,a uPVC hollow section of size 100x24mm and 2mm+/-0.2 mm wall thickness fixed to the shutter stiles by means of plastic/gakvanized M.S.'U' cleats. The shutter frame fitted with a uPVC multi-shambered single pnnel of size not less than 610mm, having overall thickness fof 20mm and 1mm+/-0.1mm wall thickness . The panels fitted vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S. rod and fsatened with nuts and washers, comlete as per manufacture's specifacation and direction of Engineer-in-charge (For W.C.and bathroom door shutters) No L W LB Door 1 1.05 2.1

S-1/1.36.2 P&F WVC wash basin (1st quality, I.S.:2556 mark) of approved make with C.I brackets duly painted, 1No. 15mm C.P. piller cock(I.S.:8934 mark) & 32mm C.P. brass waste coupling of approved make, 25mm G.I. waste pipe complete including cutting & making good the wall:size 510mmx400mm

S-1/1.2.2 P&F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS: 2556 mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm

S-2/2.1.9 P&F G.I. pipes (inernal Work) with G.I. Fitting excluding union (IS:1239 mark) & MS clamps including cutting and making good the walls and floors: concealed pipe in wall including painting with anticrrosive bitumen paint: 15mm nominal boar

S-2/2.3.1 Making connection of G.I. distribution branch with G.I. main including all fitting: up to 25mm dia

S-2/2.6.2 P&F Piller cock (IS: 8934 mark) of superior quality and approved make : C.P. piller cock 15mm nominl dia boar

S-3/3.5.1 P&F square mouth gully type trap 'A' grade (IS 651-1992 marked) of approved make complete with C.I. grating, frame & cover masonary chamber in C.M. 1:6, 100mm thick C.C.1:5:10 base concrete, 40mm thick C.C.M.-15 grade coping, 12mm thick cement plaster in C.M.1:3 complete as per approved design & type

S-3/3.16.3 P&F rigid PVC pipe (IS: 4985 mark) classII/ ( 4kg/cm squar approved quality/ make including joining the pipe with solvent cement rubber ring and lubricant.: 110mm dia

S-21/2.26.3 P&F PVC storage tank ISI marked (IS: 12701) indicatng the BIS licence no.) of approved make with cover, 25mm dia 1M long G.I. over flow pipe& 25cm long wash out pipe with plug & socket, including making connection etc. complete of approved design: 500 liters capacity

S-3/3.27.2 Construction of septic tank in all types of soil with 40cm thick masonry in cm 1:6, 15 cm thick c.c. bed of 1:5:10 m – 15 grade c.c. flooring & over stone slab covering, 80 mm thick slab jointing of slab in cm 1:3 ralthal, kharanja, 50 mm thick stone partition walls, 20mm thick plaster incm 1:6 finished with neat floating cement, 4 nosC.I.foot rests of approved design, two no. 450 mm dia each ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mt. size 230x110x150 cm. (for 20 users)

E070200 Providing & Fixing of ISI marked (IS :3854) 16 amp. flush type non modular switch as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material , minimum width of switch toggle should not less then 18 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work

BSR Items 6.1.3.2 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947- 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

E 7.4 Providing & Fixing of 16 amp. Combined flush type non modular socket and switch set with indicator and fuse set as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

E 11.1.1.1 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity 99.6 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 4.0 Sq. mm 2 core

E 0110201 Wiring of twin control light / fan / call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it's all accessories( J.B. , Bends etc.) , round tiles,2 nos. 18 SWG G.I. box with earth terminal, 2 Nos 6 A two way switch,3 pin ceiling rose/ Lamp holder / 3 point Connector, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 - 1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. . For additional technical parameters of products/ work. Short point (up to 3 mtr.)