Ajmer Development Authority Tender

Cement concerte'plain 1:2:4 mix and precast cement concerte blocks.

CementConcrete 1:4:8 oi 1:5:10 mix.

Reinforced cement concrete with cleaning, straightening and cutting of bars and seprating out from R.C.C

Dismantling stone masonry Rubble stone masonry in cement mortar

Earth work in excavation including stacking/ disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth (MoRTH specification Clause 301 to 305). ln hard soil manually using pickaxe etc.

Haulage excluding Loadlng & Unloading. Haulage of materials by tipper excluding cost of loading, unloading and stacking. Case-l : Surfaced Road

Providing and laying Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1500, 1700, & 2100 including form work at any level. P.C.C grade M15

Providing and laying mechanically mixed and vibrated Cement Concrete in foundation upto a depth of '1.5 metres below ground level and 1.50 metres above Ground/Bed level as per MoRTH Specification : Clause 1000 & 1700 P.C.C. '1:4:B mix with crushed stone aggregate 20 mrn nominal size.

Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand

Providing and laying Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1500, 1700, & 2100 including form work at any level. R.C.C grade M25

providing and laying cement concrete for plainlreinforced concrete in open foundation as per drawing and technica\ specification as per MoRTH Specification : Section 1500, 1700 & 2100 including form work at any level. R.C.C. grade M25 upto 5 metre height

Providing and fabricating steel reinforcement at any level including cutting, binding, placing in position and binding complete in foundation as per drawing and technical specification as per MoRTH Specification : Section: 1600,TMT Stee! Reinforcement

Reinforced cement concrete wearing coat M30 grade at any level including formwork and reinforcement complete as per drawing and technical specification as per MoRTH specification 2202&1500&1700

Providing and laying Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1500, 1700, & 2100 including form work at any level. P.C.C grade M20

Providing and laying stone masonry work in cement mortar 1:3 with mechanical mixer for foundation (any level) complete including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : section 1 000,1 400 ,Random rubble masonry

Prov|ding and laying granular sub-base material having P'l.not more than 6, including compacted thickness and consolidation by B-10 tonne power roller at oMC to achieve desired density to requiredcamberandgradeincludingcostofwaterandhire charges of machinery, including T&P and all lead of material from qurtry (compacted thickness to be measured) adingaSperMoRTHspecification:Table400-1,400-2with CBR value not less than 25 ,To achiev e 95% Proctor density

Providing laying, spreading and compacting crushed graded stone aggregate of as per table 400-10 and 400-11 to Wet Mix Macadam specification including premixing the material with water to OMC in mechnical mixer as per approved design mix' carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/F.E. Loader/paver finisher in sub base / base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintance of diversion etc' (MoRTH ipecification : Clause a06) by mechanical means with all lead.

Providing and applying primer coat over prepared surface or granular base with bitumen emulsion as per IS: 8887 & manufacturer's specification @ 7 kg / 10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures including cleaning of road surface as per MoRTH specification Clause - 502, 112.

Providing and applying tack coat with bitumen emulsion on the prepared surface including cleaning as per IS : 8887 & manufacturer's specifications @ 2.75 kg / 10sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperature as per MoRTH specification CI.503,112

Providing and laying bituminous macadam on prepared surface with specified graded crushed aggregrate as per table 500 - 4, for base/binder course including loading of aggregrates with F.E. loader and heating and mixing of stone aggregrate and bitumin (including cost of antistripping compound wherever required) in hot mix plant, transporting the mixed material in tipper to paver and laying mixed material with sensor paver finisher to the required level and grade, rolling by power roller & vibratory compactor to achieve the desired density ( as per job mix formula approved by the department ) excluding cost of primer / tack coat (MoRTH Specification : Clause 504,112) with 3.30% bitumen with all lead. For grading-2 (Layer thickness 50-75 mm) with bitumen grade VG 30.

Providing, laying & consolidation Semi Dense Bituminous concrete as per Design Mix on prepared surface with specified graded crushed aggregates (as per table 500 - .15) for wearing course including loading aggregates with F.E loader, heating aggregate and binder in Hot Mix plant 40 - 60 TpH (including cost of anti- stripping compound wherever required ) and transporting the mixed material with tipper and laying with paver finisher with Sensor to the required level, rolling -with Vibratory Compactor or 150 to 250 KN pneumatic tyred roller with Tp=0.7 Mpa and power roller to achieve the desired density (as per approved job mix), but excluding primer/tack coat [MoRTH Specification Clause SOB,ll?) with all lead For grading-2 (Layer thickness 50-75 mm) with bitumen grade VG 30.25 to 30 mm compacted thickness using 5% binder, grading-2 with Iead of mix material 1 km with Straight run bitumen grade VG 30

Providing and laying of hot applied thermo plastic compound inclusive of type -1 reflectorising of glass beads as per table 800.3,800.4 applied in uniform thickness of at least 2.5mm and spread uniformly with reflectorising glass beads type-2 in addition @250 gm/scm with a road marking machines as per IRC;35 complete with traffic diversion arrangement as per MoRTH specification Clause 803.4

Providing and laying of interlocking having thickness 100mm concrete block Pavements drawing and technicalas Per Pecification.

supply of cautionary / warning sign board 90cm equilateral triangle made out of 2.0 mm thick aluminum sheet face to be fully covered by white/blue high intensity grade retro reflective sheeting with Red / wnite symUol, cut out or screen printed background with epoxy paint compleie confirming to MoRTH specifications clause. 801 with angle iron post 65 x 65 x 6 mm. 3 mtr. long

Back Filling behind abutment, wing wall and return wall in 150 mm layers, with mechanical compaction, complete with all lead and lift as per drawing & technical specification clause as per MoRTH Specification : Clause : 304 Sandy Material

Providing A.C pipe Weep holes 150mm dia in Masonry/Plain Concrete/.Reinforced Concrete abutment, wing wall/return wall complete as per drawing and technical specfication as per MoRTH Specification Clause 2205

P & F precast cement concrete M-15 grade kerb over 20 mm thick base of cement mortar 1 : 6 including jointing with cement mortar 1:4 and painting with enamel paint complete as per MoRTH specification clause:1000 & 1700. (Size 30Cmx30 CM x 15 CM)