Northern Railway Tender

CODE-5 REINFORCED CEMENT CONCRETE 5

CODE-6 MASONRY WORK 6

CODE-8 CLADDING WORK 7

CODE-9 WOOD AND P.V.C. WORK 8

CODE-10 STEEL WORK 9

CODE-11 FLOORING 10

CODE-12 ROOFING 11

CODE-13 FINISHING 12

CODE-15 DISMANTLING AND DEMOLISHING

CODE-16 ROAD WORK 14

CODE-17 SANITARY INSTALLATIONS 15

CODE-18 WATER SUPPLY 16

CODE-19 DRAINAGE 17

CODE-21 ALUMINIUM WORK

Providing & fixing of composite insulated panels manufactured in a continuous process plant with high speed oscillation sprayed foam in roof and wall with all necessary flashing, trims, ridge capping, accessories & fasteners to ensure and air tight, insulated building which is not only functionally compliant but also aesthetically. pleasing with contemporary international look. The specification is as follows :- Composite insulated panels having on top side trapezoidal profile 28 - 35 mm deep and 200 - 300 mm pitch with 950 - 1050 mm effective cover width. The profile having 2 -3 secondary ribs in pan and an anticlimactically flute at side overlap shal be made of 0.50 mm TCT pre- painted high tensile gallvalume/zincalume steel grade AZ 150/G-300 having not dipped mettalic Zn-Al alloy coating (150gms/Sqm, Zinc 45% AI 55% ) as per As 1397 - 1993 having 300 MPs yield strength with super Durable Polyster XRW coating or equivalent as per AS/NZS - 2728 - 1997 category 3 total coating thickness of 35 microns comprising of 20 microns exterior coat of SMP over superpolyster XRW 1 on top surface & 5 micropolyster reverse on back surface over 5 micron primer coat on both surfaces and bottom liner tray made of 0.50mm TCT - prepainted high tensile gallvalume/Zicalume steel grade AZ 150/G-300 of similar specification as for the top sheet in approved colour including side and end taps. The panels shall have 30mm thick (Min) insulation core of rigid polyurethane foam 40 kg/m3 density to the reuirement of IS 12436-68. The panels shall be produced in a continuous process line with high pressure oscillation spray foamed insulation core. The panels of customised length shall have a return leg tongue to ensure snug and air tight joinery at bottom. The overlap side shall have an isolation tap to prevent thermal bridge. Roof and wail apnels shall be fixed using stainless steel hex head self drilling fasteners as per AS 3566 class 3 or equivalent on crest of panels for connection with purlins and stiching fastner @ 300 mm c/c on all side and end laps etc. Measurement shall be based on per unit of finshed laid surface area. Sealant and gaskets wherever necessary to be provided to ensure contemporary aesthetic look of international standard. Roofs of buildings, Canopy and side cladding, gable end cladding etc all complete:-

Providing & fixing permanently colour coated trapezoidal profiled sheet of depth 28-35 mm deep and 200 -300 mm pitch distance with precisely engineered "rlb & Flute " design with 950 - 1050 mm effective cover width matching to profile of PUF panels. Profilled sheets shall be minimum 0.50mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated gallvalume/zincalume steel sheet ( 550 Mpa yiled strenghth ) having a coating of mass of 150 GSM Zn - AI alloy coating as per As 1397 - 2 1993 fnished with 20 micron approved colour coating of Super Durable Polyster XRW coating or equivalent paint, coat on expossed surface over a primer coat of 5 micron and back coat of 5 micron on reverseside over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlings/girts with the hexogonal neadself drilling suitable fasteners with EPDM washer on crests of the sheet @ 300mm c/c on all sides and end laps etc. Measurement shall be based on per unit of finshed laid surface area. Sealant and gaskets wherever necessary to be provided to ensure contemporary aesthetic look of international standard. Roofing and Partition wall, side wall claddings etc all complete.

Designing, providing, fabricating, painting, transporting, erecting and securing in position structural steel work for pre-engineered building and workshops complete as per specifications, approved shop drawings and or instuctions. Work under this item would generally cover all structural steel work in the Buildings/Workshops, including but not being limted to, columns, stanchions, beams, rafters, purlins, canopy, steel work for cladding & louvers above 4.80mm high from floor level, gantry girders, bracings ,catwalk, ladders & stars inside and outside, provision for fixing Electrical, Mechnical and S & T equipments. All structural steel shall be suply painted as per specification of the painting as per Clause 2.0 of Specification for PEB. Work to include all intermediate stages of activities not defined herein, but otherwise implied for completion of work under this item. 3 Cost to include but not to be limited to, all materials including wastage all consumbales, fasteners ofall types for both temporary and permanent stages of work, all temporary stays, labour, temporary works including staging, scaffloding, tools, plant and costs of all incidentals and necessary testing of materials, workmanship etc. Including cost of painting as per specifications. Note: The above description of item includes the cost of -(1)Designing , providing and fixing of rain water guttersand down take pipe of 0.50 TGT pre-painted Galvalume /Zinacalume steel in approved colour all along all edges of the building based on the available surface area and rainfall data.2. Provision of ventilation system including designing, supplying and fixing at required location for 600mm throat edge ventilators along ride for full length of the shedwith required numbers of 600mm dia Turbo vents shall be provided on both side slope to achieve minimum 5(five) air changes per hour as per the desigm approved by the railway. (3) Planning and providing architectural and engineering drawings with all details of Workshop including facade, plan, elevation, section, details of gantry girders & crane rail to suit installation of EOT crane, details of roofing, wall cladding, rolling shutters, flooring, cableduct, water supply, drainage, doors, windows, grills, louvers etc as per requirement of individuls shed in consultation with Engineer-in-Charge. 4.Desigining and providing detailed drawing of foundations, columns, tie beams & beams/plinth beam duly roof proof checked by IIT approved by Railway and Designing and providing detailde drawing of flooring, cable ducts, drains, water supply, cubicles, embeddedtracks, gas pipe line, roofing, solar light pipe & poly carbonate sheets, wall clading, Industrial flooring, etc as per requirement of individual shed in consultation with Engineer-in-charge. ( The payment for actual executed quantities of foundation & all other items upto top of RCC Pedestals excluding Holding Down MS Bolts will be made separately in relevant items.) (a) Shop size 110m x 16m Minimum vertical clearance inside portal 9.0m . NOTE: A QUOTATION WORK AMOUNTIG TO Rs. 35,00,000/- (THIRTY FIVE LACS) FOR PLANNING, DESIGNING AND PROVIDING DETAIL DRAWINGS OF THIS WORK IS IN PROCESS. IF THE DESIGN AS INCLUDED IN THIS ITEM AS PER NOTE NO. 1,2,3 AND 4 IS PROVIDED THROUGH THIS QUOTATION BY THE RAILWAYS, THE AMOUNT/COST OF THE QUOTATION WORK i.e. 35.00 Lakh WILL BE DEDUCTED FROM THE TOTAL AMOUNT OF THIS ITEM NO. NS-3.

Designing, supplying, erecting and fixing in position 3mm thick polycarbonate sheets of approved make texture and colour for roof lighting. Sheets to be profiled to match metal sheets 4 described in other item should include cost of laying sheet in curvature wherever required, cost to include jointing, sealing with Butyl adhesive to make it complete water tight and takes as per manufactures specifications and cover all cost of labour, tools, plants, temporary works etc all complete. Roofs of buildings and side cladding, gable end cladding etc all complete :-

Designing, providing, fabricating, painting, transporting securing in position LOUVERS with wide narrows slats as per drawings and instructions, complete with metal frame work in 3mm thick steel sheet painted as per specification. Profilled sheets of louver shall be minimum 0.50 mm TCT/0.45mm BMT high tensille zinc aluminium alloy coated gallvalume/zincalume steel sheet ( 550 5 MPa yield strength ) having a coating of mass of 150 GSM Zn-AI alloy coating as per As 1397-1993 finished with 20 micron approved colour coating of Sillicon modified polyster (SMP/Super polyster paint coat on exposed surface over a primer coat of 5 micron and back coat of 5 micron on reverse side over a 5micron primer coat Cost includes necessary fillers, seals flashing, rubber strip nosing to slats complete in all respects. Payment shall be based on area measured with in frame work of louvers units.

Suppling, fitings and fixing Turbo Extractor/ventilator 24 inches dia with 2 mm thick 6 fiber glass base frame with transportation labour, hardware sealent with inserting leak proff tape in between joints complete having FRP base frame 1650 mm long. Rate shall be inclusive of all lead, lift, transportation taxes etc complete in all respect.

Supplying, fabrication, laying fitting & fixing of embeded track ( of single Rail SWR type ) which include supply, fabrication cutting and drilling holes and laying of base plates as per approved drawing supplying, fixing of holding down bolt at correct location and allignment at spacing of 750mm ( max.) c/c with washer etc. as required supplying and fixing of guard angles of size 75x75x8 (providing 2 nos angles, one on outer side of each rails) in inspection pit, collecting and leadings of Rail from stock yard pairing & butting of rails, inserting of rails, cuttting end and drilling two holes at each end, distribution of small track fitting, oilling and greasing of fish plate and fish bolt etc. complete job with contractor labour, material, consumbale, equipment, all lead, lift ascend, decend, crossing the track etc as required as per approved drawing for track fixing and or as per instruction of engineer at site Note :- (1) Rail fish plate, fish bolt will be supplied by Railway free of cost. (2) Structural steel shall be make SAIL/TISCO/IISCO/RINL.The cost include testing of material from approved laboratory by Railways. ( Unit Meter Read as Track Meter )

Supplying, erecting & fixing og Gantry rails of section CR 100/CR 80/CR 60 as per requirment conforming to IS : 3443 -1980 including supplying and fixing all fixtures viz. rail clips, nut bolts, washer etc. complete in all respects.

Supply & application of Poly sulphide sealants of approved make preferably SIKA or 9 SIMILAR,, preparation of groove of 5mm to 10mm width and 25mm depth in both horizontal and vertical lines spaced (@ 6m C/C and 4m C/C or as directed by the Engineer in charge at site) in VD floor.

Provinding and laying RCC design mix M25/M30/M35 grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge for all heights and depths in buldings and structural work upto plinth level including compaction of concrete by electric/mechanical vibrartor, providing and using admixture in recommended proportion as per IS - 456, IS-9103 concrete bridge code applicable as per approved mix design complying with minimum cement content, maximum water cement ratio and slump as specified produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete, curing of concrete as 10 required in IRC - 112/IRS - CBC/IS codes as applicable including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossing or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all saftey works and saftey precautions with all labour arrangments for cold weather and hot weather concrete as applicable, taxes and royalty etc. as a complete job as per specification and as per directions of Engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture ( plasticizer, super plasticizer or retarder etc. ) as per approved mix design. Note :- (i) Payment of reinforcement steel including Cutting, straightening, hooking, bending, binding, uncoilling and placing in postion including cost of binding wire and shuttering shall be paid extra under relevant items of USOR - 2010.

Providing and laying in position reinforced cement concrete of M25/M30/M35 grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge in all type of building and structural works above plinth for all height including compaction of concrete by electrical/mechanical vibrator providing and using admixture in recommended proportion as per IS-456, IRC-112, IS-9103 & concrete bridge code applicable as per approved mix design meeting the conditions of minimum cement content maximum water cement ratio and slump as specified in special conditions producted by RMC plant/automatic computerized/electronic batching plant and placed using concert pump including designing of concrete mix, finshing the exposed surface of concrete curing of concrete as required in IRC-112 11 including all lead by transit mixure ( crossing of stream, nallahs railway tracks level crossings or any other obstruction such as traffic jam etc) lift pumping ascent , descend, loading, unloading, handling, rehandling of material at all height including all incidental works, fixing of ducts or any fier etc wastages if any cost of all saftey works and saftey precautions with all labour arrangments for cold weather and hot weather concreting as applicable taxes and royality etc as a complete job as per specification and direction of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement, admixture ( Plasticixer, Super platicizer or retarder etc) ae per approved mix design.Payment of reinforcement steel including cutting, straightening ,hooking,bending,binding, placing and keeping and maintaing in position including cost of binding wire and shuttering arranged by contractor and will be made separately under relevant items of USOR- 2010). Work will be excuted as per Indian Railway Unified standard specifications applicable for RCC/PSC works contained in chapter 4 & 20.

Design, Supplying, Cutting, Fixing and Fabricating Steel Sheet pile of required shape, size, thickness, depth and weight conforming to IS - 2314 including loading, unloading, leading 12 assembling and drving at site with use of vibro hammer as directed by site engineer including all labour, material and taxes as a complete job. Work shall be executed as per provisions of Appendix - VII of IRS - B1 - 2001 and provisions contained in CH 21 of USSOR specifications.

Rebate for sheet piles taken out after completion of mega block and construction of necessery protection walls/box with all necessery vibro hammers and other T&P required as acomplete 13 job. Note Min 04 nos vibro hammers have o be deployed ( Two no at each LHS site ) in order to optimize the use of traffic cum OHE shadow blocke. 2 Minimum permissible retesion time for sheet pile at site will be 4 months. 3 Released material shall be the property of contractor. 4 Refer relevant clause of specail conditions related to site data and specifications before quoting the rates.

Rebate of dismantling all type of steel structural posts in fencing protection work & other steel structure including Rail post in foundation, columns, beams,steel sheets or plates etc. with 14 contractors own labour and equipment including all leads, lifts, handling, rehandling and disposal of released material outside Railway land. Note: Released material except Rails will be the property of the contractor and cost of material will be deducted will be deducted as per rate approved in this item i.e NS 14.

Dismantling RCC CC brick work stone work tilling hard rock and asphalted Road in cement/Lime etc which can be dismantled manually or by mechanical means and removal/disposal of 15 dismantled material/malba outside Railway land as directed by Engineer In charge at all height/depth irrespective of any lead lift loading unloading handling re - handling ascents, descents, Crossing of nallah stream, track, level crossing or any other obstruction with all labour material tools, plants and machinery etc as a cpmplete job. Note :- 1. All released materials will be the property of contractor. 2. Dumping area shall be arranged by the contractor at his own cost.

Rebate for dismantling brick masonary structure along with RCC/Arch/AC sheets/GI Sheets roof of existing Railway buildings in superstructure and foundations with contractors own labour, equipment and machinery including all leads , lifts, height and disposal of released material outside the Railway boundary. Released material will be the property of the contractor except Rails, 16 electrical fittings and fixtures. Site of dismantling will be made levelled and clean. Note: 1. The measurement will be made on plinth area basis. 2. The rates are for single storey building only. For multi storey buildings the area will be multiplied by the number of storeys for effecting teh deduction. 3. Dumping area is to be arranged by the contractor at his own cost. 4. Rails, Electrical fittings & fixtures will be the property of the Railways and the contractor will submit these items in the Railways store.

Supply of Flexible PVC insulated 3-core x 2.5 sq. mm multi strand power cables provided for each of the display boards shall conform to specification no. IS: 694:1990 reaffirmed 1995 or latest. Inspection by Consignee.

"Supply of Power Cable 3 Core 1.5 Sq mm. Multi Strand Copper Conductor, PVC Insulated. As per IS:694:1990 with Latest amendments & Versions. Inspection by Consignee.

Supply of CAT-6 UTP Cable (23 AWG). It Shall comply to TEC GR No. TEC/GR/SLC- 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version. Inspection by RITES.

Supply of CAT-6A UTP Cable (23 AWG). It Shall be of reputed make. Inspection by Consignee.

Supply & installation of 24 Port Jack Panel for CAT-6 Cable. It Shall comply to TEC GR No. TEC/GR/SLC 01/02.AUG 05 (TEC Standard Numbers TEC 52010:2005) with latest amendments, Version, Inspection by Consignee.

Supply, Installation, Testing and Commissioning of Network Server as per technical specification given in Para no.1.1.1 of Chapter 111 Inspection by RITES. Document

Supply of CAT-6 UTP Patch Cord of length 2 Mtr. It Shall comply to TEC GR No. TEC/GR/SLC-01/02 AUG 05 (TEC Standard Number: TEC 52010.2005) with latest amendments, Version. Inspection by Consignee.

Supply of CAT-6 UTP Patch Cord of length 8 inch. It shall be of Reputed make Inspection by Comsagnee. 9

Supply of RJ-45 Connector for CAT-6 cable .Inspection by Consignee

"Supply & Installation of RJ-45 1/0 box with SHB (suitable for CAT 6 UTP cable) & face plate with complete accessories It Shall comply to TEC GR NO TEC/GR/SLC-01/02.AUG 05 (TEC 11 Standard Number: TEC 52010:2005) with latest amendments, Version Inspection by Consignee."

Supply of 3 Modules Pop-up Box Metal Termination Box. Make Legrand or other reputed make. Inspection by Consignee

Supply, Installation, Testing & Commissioning of Wireless Access point with license as per Technical specification given in para.no.1.1.2 of 13 Chapter-111 Inspection by RITES.

Supply and Installation of Modular socket Box with one RJ-11 double Socket Box & two 13 RJ45 socket complete with 3 module metal flush box and face plate with all required accessories. It Shall comply to TEC GR No. TEC/GR/SLC-01/02 AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version. Inspection by RITES.

Supply and Installation of Modular socket Box with Two RJ-11 double line Socket & Four 14 R145 socket complete with 6 module metal flush box and face plate with all required accessories. It TEC/GR/SLC-01/02.AUG 05 (TEC Standard Number TEC 52010:2005) with latest amendments, Version. Inspection by RITES.

Laying of telecom cable, Data Cable OFC Cable, Poner cable etc. in the PVC conduit pipe/Capping-Casing. As per instructions by Consignee,

Supply & installation of 600 pair Krone pe DP Bath Krone module with rompicic accessories. It shall be of reputed make Inspection by Consignee,

Supply of 100 par Krone typ with Krone module with complete accessones, it shall be of reauted mave Inspection by Consignee,

Fabrication, Supply , Fixing of Cable Tray made of MS. Sheet of sorts and sizes along with suitable sire of MS angles/slotting angles/Clamps with painting as per requirement. Inspection by consignee.

Supply & Installation of LIU for 6X2 fiber (27 Fiber) for OFC cabin with OFC patch cord minimum length 5 mtrs including splicing work. Make Legrand or Molex or 3C3 or Commscope or Amphenol FCI of of reputed make. Inspection by Consignee.

Supply & Installation of Networking Rack 19/420 with all accessories as per Technical specification given in para.no.1.15 of Chapter-111 Inspection by Consigrice

Supply, Installation, Testing & commissioning of Celling Speaker minimur to antt as per technical specification oven in Para no.1.1.6 of 37 Chapter-111 Intestion by Consignee.

Supply of Wiretap Tester (Network Microscanner Cable Tester) for CAT-6 and CAT-5 Cable Make Fluke Model no M52-100 or equivalent specification 44 of reputed make Inspection by Consignee

Supply, Installation, Testing & Commissioning of Microphone with embedded installation. Using a few Numeric controlled design. Microphone have to speak a single bond and 23 Lamp, can speak straight control/instructions single directional microphones high sensitivity with the function of preventing gas explosion sound Frequency Response 100-16KHz, Sensitivity -40d842dB, Reference sound receiving distante 20-120cm. Microphone should have indications for power and mike activation Inspection by RITES

Supply, Installation, Testing & Commissioning of IP based Touch Screen Microphone as per Technical specification given in para.no.1.1 17 of 4 Chapter-III. Inspection by Consignee

Supply of closed racks complete ( 545mm x 564mm x 2090mm) with all fittings for 25 housing SDH equipments, primary Mux, FDF, DDF, MDF using krone module and other equipments like runway ladders etc. completely wired and equipped with integrated protection modules for all channels as per technical specifications and other stipulations of tender documents. It should be possible to lock all the equipments with only order wire telephone remaining outside the rack.

EOT Crane,25/5 Tonne as per specification no.Mech/M&P/Trainset18/ASR/EOTC(25T)

Commissioning of Sync Mobile Jacks( 04 Car Lifting) with associated accessories Mobile Lifting Jacks 35 Tonne (16+2) Jacks 3

Rotary Screw Diesel Driven 300 CFM 10 KG/CM2 4

Computerized Rake Test Rig (RTR) (SCADA based) 5

Rotary Screw Electrical driven air Compressor 500 CFM 10 KG/CM2 6

CNC Under floor Wheel Lathe with industry 4.0 features for wheel re profiling. 7

Provision of EOT Crane-10Ton capacity for service shed 8

Laser Scanning wheel profile measurement (Portable hand held)

Supply, installation, commissioning and proving out of Shock absorber testing machine for dampers 10

Fork Lift 05 Ton with accessories 11

Battery operated Platform Truck(02Ton) 12

Portable rectifier Inverter based Welding Set, 200 Amp 13

Spray Painting Machine (Airless Paint Sprayer APS 470) 14

Pipe Bending Machine 15

Supply, Installation and commissioning of office work stations, (Modular Work Station) 15

Supply OF lockers(Staff Lockers) 16

Roof Access Ladder (Normal Shop Floor) 17

Road Mobile Crane 15 Tonne (Diesel Hydraulic Road Mobile Crane)

Supply installation and commissioning of laying of pipe lines for all compressors (GI pipe) including cutting, threading, welding etc (Assume 1200 Mtr ) 02 washing lines 19

Eddy Current Array 20

Supply installation and commissioning of Scissor Lift (3mtr height)

SUPPLY ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV (Explanatory notes) of attached tender document

ERECTION ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV (Explanatory notes) of attached tender document

SUPPLY ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV (Explanatory notes) of attached tender document

ERECTION ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV (Explanatory notes) of attached tender document

SUPPLY ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV (Explanatory notes) of attached tender document

ERECTION ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV (Explanatory notes) of attached tender document

SUPPLY ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV (Explanatory notes) of attached tender document

ERECTION ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV(Explanatory notes) of attached tender document

SUPPLY ITEMS (Item-wise explanatory note/technical specification is given Part-1 chapter-IV(Explanatory notes) of attached tender document

Supply and erection of OHE caution board with supply of fixing material (Clamp, back flat strip & fastners) for-'caution unwired turnout' board size 900x600x2mm

Supply of Packing Saddle R.I NO.1174 (Ref Core Drg.No. RE/33/P/1174 ) and RDSO specification No. TI/SPC/OHE/Fitting/0130(10/13), Rev-1 or latest. 25

GPS(Elect) SOR

Supply & installation of Industrial type Wall/ Pillar Mounted 600 mm sweep Air Circulator Fan complete with all accessories of approved make and as per explanatory note including connection with 1.5sq.mm3 core PVC insulated and PVC sheathed copper conductor cable or as supplied by manufacturer with Fan, testing and commissioning. The fixing arrangement of fan as per site Requirement and approved by Railways.

After the two years' warranty period successful bidder will be required to Undertake Comprehensive Annual Maintenance for a bperiod of 5 years in line with clause 28.0 of Special condition of Contract for Mechanical works.

Activities at Construction Sites 2

Rails, sleepers and fitting Renewals 3

Maintenance Activities 4

Miscellaneous Items