National Highways Authority Of India Tender

Providing and laying dense graded bituminous macadam 50mm with batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 4.5%, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 505 of MORT&H specifications

Providing and marking of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms/sqm. Area , thichkness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be levelled, uniform and free from streaks and holes complete in all respect. The job includes marking of centre line, shoulder line, edge line, Zebra crossing marking, arrows and dashes at the junctions as per Technical Specifications clause no. 803.4 complete in all respect as per approval of Engineer-In-Charge.

Moulded Shank Road Stud:Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Recovery for milled material 40% BC which shall be made for retrived milled material at the rates specified herein(i.e. @ 20% of rate quoted for item of BC).Note-Material obtained from milling of existing butiminous layer has been calculated as per theoretal calculation.The agency shall take away this materal at the fixed rate 20% of quoted rate of BC.If actual material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate shall be made.The Dismantled material can be used in any of the items for the work after modification so as to fulfil req. of MORTH specification Clause 519 and after approval from the employer.In case it is not possible to use this material on the work the agency can take away this material. However recovry of material shall be made for the quantity and at rates specified herein irrespective of the fact that material is used in the work or not.Bidder/Agency may visit site before quoting rates and make his assessment for the extent of retrieved material.

Total Estimated Cost

Bidder to quote single rate as tender premium % above or discount below the total estimated cost mentioned above.

I/We hereby agree to execute the above work on the tender premium or discount quoted here on the total estimated cost mentioned above. I/we understand that filling of both cells meant for premium or discount at a time will render my/our bid as non responsive.

Bid price in Rs.