Military Engineer Services Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Technical
Technical
Class Of Bidder
... View More
The eligible classes required by a bidder to participate or bid in the tender are 'Class S' and above, 'Class SS to E', and 'S' class and above with category a(i).
Technical Capacity
... View More
The required prior work experience for the bidder includes satisfactorily completing requisite value works with certain government entities, such as Central/State Government, Central/State PSUs, AWHO, AFNHB, CGEWHO, and DGMAP. Additionally, contractors of one class below the eligible class may be considered if they have previously completed similar works satisfactorily. The bidder should also meet the enlistment criteria of 'S' class MES contractors. Regarding the value and percentage of similar works completed, no specific amount or percentage is mentioned. However, it is stated that an un-enlisted contractor who is already executing works in MES shall not be considered eligible for the subject tender if the total value of such works is more than twice the tendering limit of the MES Class of contractor for which it is eligible. Furthermore, contractors of one class below the eligible class shall not be considered if their present residual work in hand is more than five times their present tendering limit. The bidder should submit details of works completed and under progress in MES, including the value of the work, in a specified format. The required prior work experience also includes being enlisted with MES in Class 'S' and above and category a(i) subject to satisfactory remarks with respect to performance in respect of works in hand.
Costs
EMD
₹ 7,50,400Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_709561_1Tender No
CEBTZ/BKN/TOKEN-21 OF 2025-26Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Material and labour Anti termite treatment of soil under existing floor using chemical emulsion one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed by Engineer-in- charge.
5600
-
-
... More
Material and labour Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified by Engineer-in- charge.
1900
-
-
... More
Supply & fixing factory made UPVC sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) with or without provision of opening for cooler as directed including all fittings, steel roller system, locking arrangement etc., making arrangement for fixing of hardware, glass, wiremesh, grill etc all as per manufacture instruction and Drg No BTD-890/R and as directed.
Note : (i) The unit rate quoted by contractor includes cost of all connected accessories except glass and wire mesh. Glass and wire mesh shall be measured and paid separately. Net Opening will be measured for payment purpose. Provision of all other items as shown on Drgs & Cutting holes of suitable depth in wall for inserting lugs etc including making good dismantled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate and cement mortar (1:3) shall be demand to be include (ii) The width /height as shown in drawing are tentative, however the same shall be adjusted as per actual opening at site. Design and pattern of window will be decided by GE as per site requirement during execution at site.
760
-
-
... More
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
95
-
-
... More
Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
3065
-
-
... More
Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
1300
-
-
... More
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge including supply and fixing following items:
(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.
(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf
(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.
(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf
1350
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including S&F of stainless steel 304 Grade (natural finish) wire cloth, all as per direction of Engineer- In- Charge including supply and fixing following items:
(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.
(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf
(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.
(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf
(f) Stainless Steel (304 Grade) wire cloth fixing as per manufacture
404
-
-
... More
Note for WPC/uPVC Frame/window/shutter
(a) Test certificate of Manufacturer to be provided by contractor.
(b) Embossing with Barcode of Manufacturer engraved over each door Frame & shutter is mandatory.
-
-
-
... More
Supply & fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed including necessary beading etc complete all as per direction of Engineer- in-Charge
864.5
-
-
... More
Supply & fixing HDHMR Board, 18/19mm thick, density over 850kg/cum, having a class A fire rating, grade 2 quality, commercial type, as in cupboard shutter fixed with Stainless steel (304 grade) Finished Handle 150mm long- 01 No on each shutter complete all as specified and directed by Engineer-in-charge Note:- Design and pattern will be finalized as per site reqmt.
1600
-
-
... More
Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & as directed by Engineer-in-charge.
250
-
-
... More
Supply and fixing Magnetic catcher fixed with steel screw complete all as specified and as directed by Engineer-in-charge.
2875
-
-
... More
S&F 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge
500
-
-
... More
Supply & fixing Continuous (piano) hinges, stainless steel, bright finish, width of flap when open 30mm complete all as specified and as directed by Engineer-in-charge .
1400
-
-
... More
Supply and fixing stainless steel pipe 25mm bore (as a curtain rod), wall thickness of pipe not less than 1mm and grade SS 202, fixed in position with fixing accessories like Brackets, finial and side holder of same manufacturer complete all as specified and as directed by Engineer-in-Charge.
Note : (i) Brackets, finial and side holder shall be measured and paid separately for supply only but the cost for fixing the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
(ii) Cost for screws, rawl plugs as required for fixing shall also shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
1400
-
-
... More
Supply only stainless steel 202 grade brackets for fixing of 25mm bore curtain rods complete all as specified.
1800
-
-
... More
Supply & fixing 4.8 mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane (aluminium window/ventilator) complete all as specified and as directed by Engineer-in- charge. Note :- Cost for Aluminium fittings and rubber beading for securing the glass shall be included in main item of aluminium window/ventilator of BOQ.
540
-
-
... More
Suppl only 5 mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane complete all as specified and as directed by Engineer-in- charge.
Note :- Cost for Aluminium fittings and rubber beading for securing the glass shall be included in main item of aluminium window/ventilator of BOQ.
75
-
-
... More
Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. complete all as specified and as directed by Engineer-in-Charge.
2600
-
-
... More
Demolition of floor hearth or wall tilling/terrazzo including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed by Engineer-in-Charge.
4330
-
-
... More
Material and labour for 7 to 8 mm thick non-skid ceramic colour (light shade) joint free tiles with matt finish premium quality having water absorption should be between 3% to 6%, square/ rectangular, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor, set and jointed using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 including necessary cutting as per site requirement, complete all as specified and directed by Engineer-in-Charge.
900
-
-
... More
Material and labour for Double charge vitrified coloured tiles (approved shade) of size 600mm x 600mm having thickness 8 to 9 mm premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floor, set and jointed using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, complete all as specified and directed by Engineer-in-Charge. Make : Johnson (Snow Flair/Albano White Plus/Albano Lemon Plus) or Techno commercial equivalent in make mentioned in Appendix 'B'
4900
-
-
... More
Ditto all as above item but as in skirting, but tiles laid over and including 10 mm thick bedding layer in cement mortar (1:3) complete all as specified and as directed by Engineer-in-Charge.
780
-
-
... More
Material and labour for Providing and Laying Premium (1st) quality having water absorption should be between 10% to 20%, digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 450 X 350 mm and 7 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
Note : Dado should be flushed with the wall plastering.
Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or Techno commercial equivalent in make mentioned in Appendix 'B'
3550
-
-
... More
Dismantling of stone slab tiling including cement mortar bedding ( but not backing) and including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed by Engineer-in-Charge.
88
-
-
... More
Material and labour for Rajasthan black granite (Telephonic Z-black) , machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 20 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and as directed by Engineer-in-Charge.
Note : Single piece should be used in steps/cills/jambs/shelves.
301
-
-
... More
Material and labour for anti skid full body vitrified step tiles 10mm thick as in riser, skirting (single piece length wise upto 1200mm) laid over and including screed bed 10mm thick in CM 1:3 complete all as specified as directed.
657.8
-
-
... More
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed by Engineer-in-Charge.
127.97
-
-
... More
Material and labour for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, hard standing, path etc, laid in suitable panels not exceeding 3.00 m length finished even and smooth without using extra cement, 10mm Joints filled with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified and directed by Engineer-in-Charge.
1406.25
-
-
... More
Material and labour for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.
246.1
-
-
... More
Demolition of lime concrete of any description and in any position (not otherwise specifically provided for in this Schedule, complete all as specified & as directed.
645
108
-
... More
M&L for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one method Method 1 (A) - Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent , having 100 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5.Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand).Making Gola of size 75X75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 . (1 Cement : 1Polymer : 4 Sand). The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc., complete as per manufacturers specifications. (B) Bore Packing: All the borehole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non-shrink free flow grout - SmartCare GP Grout or approved equivalent having dual shrinkage compensation property. Before the bore packing, surface of the pvc pipe and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (c) Apply 12-15mm 1:3 cement plaster on slab and vertical surface admixed with SmartCare Vitalia Neo @200ml per bag of cement.
470
-
-
... More
Refer Contd serial item No. 36.00 : Method 2 (A) - Providing & applying two component cementitious & acrylic flexible waterproofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm or equivalent with a paint brush over existing roof surface. The Polyester reinforced coated net of 45g/m2, 2.5mmx2.5mm is Laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k or equivalent. After removal of all loose materials like dust etc. With wire brush coir brushes from roof surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based repair mortar/micro concrete, repairing with 15 mm thick cement plaster after the repairing work making the gola on surrounding wall’s junction and seal the vertical walls up to 2100 mm. In case of core cutting on the surface, the joint is seal with non-shrink grout. The work complete as per the direction of Engineer-in-Charge. (Work shall be executed through specialized agency)
-
-
-
... More
Material and labour for PCC (1:2:4), type B-0 using 12.5mm graded stone aggregate mass concrete as in roof padding complete all as specified and as directed by Engineer-in-charge.
215
-
-
... More
Material and labour for applying 10mm thick rendering /screed in cement mortar (1:4) including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only under relevant item of BOQ).
4300
-
-
... More
Material and labour for applying 10mm thick rendering /screed in cement mortar (1:3) including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50 kg and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only under relevant item of BOQ).
470
-
-
... More
M&L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, ceiling, slab, column, lintel, pardi, railiing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying on coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size 100 x 100 mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar 1:3 average thickness 30mm and thereafter rendering 10 mm thick plaster in cement mortar 1:3, mixed with water proofing compound in the ratio as per the manufacture's instructions and finishing the surfaces even and amooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour.
(Note :- (i) The finished level of the surfaces shall be matched with the existing surface )
(ii) Provision of additional reinforcement steel in case required and ordered shall be measured and paid separately.
(iii) WPC shall be measured and paid separately
2500
-
-
... More
Material and labour for roof surface treated with PU Elastoseal primer with Epoxy Primer to seal the pores and enhance the adhesion of the coating, supplying and applying single component waterproofing liquid membrane based on pure, elastomeric, polyurethane resin cold applied of spray/brush applied membrane with an elongation of 650%+ 50 and tensile strength not less than 2 Mpa, crack bridging ability not less than 2mm. No leakage upto 5 bars of water pressure. Shore Hardness > 50 Shore. The minimum thickness to be applied shall be 1.5 mm, (overall) in two layers (each layer 750 micron) or as per manufacturer’s instructions so as to achieve thickness not less than 1.5mm including providing & laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75mm before laying SRI roof tiles complete all as specified and as directed by Engineer-in-Charge..
Note : (i) The treatment shall be carried out by authorised applicator approved by CWE as per the manufacturer
(ii) Payment will be made after providing warranty certificate from the company.
Makes of PU Primer/ Membrane SIKA/ BASF, BERGER/ STP FOSROC/ SAINT GOBAIN, PIDILITE.
4300
-
-
... More
Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed by Engineer-in-charge.
2500
-
-
... More
Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed by Engineer-in-charge.
1875
-
-
... More
Supply & fixing of 20mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed.
2500
-
-
... More
Supply & fixing of 25mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed.
NOTE FOR CPVC PIPES : (i) Pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by Engineer-in-Charge. (ii) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. (iii) Cost for cutting chases in wall and making good disturbed surfaces as required shall deemed to be included in the quoted unit rate.
1875
-
-
... More
S&F male/female brass threaded adaptor (FTA/FBTA) complete all as specified.
1550
-
-
... More
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection including dismantling/taking down old water storage tanks of any description and capicity with float valve and gate valve complete all as specified and as directed by Engineer-in-charge.
84
-
-
... More
Disconnecting existing serviceable PVC tanks (OHT) of capacity upto 500 litre, setting aside or lowering for repairs, cleaning , etc. and hoisting if required reconnecting and re-fixing in original position including all inlet and outlet water connection (as per existing) after removing all scale and dirt from tanks and from mouths of circulating pipes complete all as specified and as directed by Engineer-in-charge.
41
-
-
... More
Supply and fixing in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed by Engineer-in-charge.
84
-
-
... More
Supply and fixing in replacement 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & as directed by Engineer-in-charge.
250
-
-
... More
Supply and fixing in replacement Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer-in-charge.
Make : Jaquar (Cat No. VGP-81053 (Vintage Prime)) or equivalent from Cera (Valentina Single Lever Series) or Techno commercial equivalent in make mentioned in Appendix 'B'
250
-
-
... More
Supply and fixing single liver basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe complete all as specified and as directed by Engineer-in-charge.
Make : Jaquar (Cat No. VGP-81051B(Vintage Prime)) or Cera (Cat No - F1013451) or equivalent from Hindware (Fluid Series) or Techno commercial equivalent in make mentioned in Appendix 'B'
125
-
-
... More
Supply and fixing single lever High concealed diverter flow consisting of exposed part kit with operating lever, wall flange & button and concealed body, cartdge sleeve and also including bath spout with flange chromium plated ,screwed down, high pressure complete all as specified and as directed by Engineer-in-charge.
Make Cera:(exposed part F1018721, concealed part F4030101, bath Spout F1020661) or Techno commercial equivalent in make mentioned in Appendix 'B'
125
-
-
... More
Supply and fixing stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed by Engineer-in-charge.
Make : Sink :- Nirali (Elegance) or Diamond (REK 3618) or Neelkanth
Make : Bottle Trap :- Hindware (F850015) or Techno commercial equivalent in make mentioned in Appendix 'B'
125
-
-
... More
Supply and fixing Plate Rack / Dish Rack of overall size 750mmx600mmx250mm (Approx size), glossy finish made out of Food Grade Stainless Steel 1mm thick sheet/strip including necessary arrangements for plates and utencils to keep (Holds up to many plates or bowls To accommodate several place settings, Multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories fixed in position as directed with SS screws/fasteners etc complete all as directed by Engineer-in-charge.
125
-
-
... More
Supply and fixing in repair vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. brass CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as directed by Engineer-in-charge.
Make : Hindware (WHB-Garnet (Cat No.- 10080), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or Techno commercial equivalent in make mentioned in Appendix 'B'
125
-
-
... More
Supply and fixing vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic soft close seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.
Make : Jaquar (Continental Series-CNS-WHT-963N or Techno commercial equivalent in make mentioned in Appendix 'B'
125
-
-
... More
Supply and fixing health faucet (Hand Shower) fancy type, CP including 1.2 meter long 8mm dia wasy flex tube in chrome finish and including wall hook and fixing material, making connections and fixed in position complete all as specified and as directed by Engineer-in-charge. Make: Jaquar(continental series) ALD-573 / Hindware (contessa plus series)/ Cera (Ocean series) or Techno commercial equivalent in make mentioned in Appendix 'B'
125
-
-
... More
Supply and fixing concealed flushing cistern of PVC 8 ltr. cap with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size complete in all respect all as specified.
Make : Jaquar (Concealed Cistern-JCS-WHT-2400S, Flush Plate-JCP-CHR-812415) or Techno commercial equivalent in make mentioned in Appendix 'B'
125
-
-
... More
Supply and fixing towel rail CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified and as directed by Engineer-in-charge. Make : Jaquar/Cera/Hindware/Marc/Prima
125
-
-
... More
Supply and fixing soap dish, stainless steel of suitable size to accommodate soap , tooth brush glass and tooth paste complete all as specified and as directed by Engineer-in-charge.
125
-
-
... More
Supply and fixing in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-charge.
125
-
-
... More
Supply and fixing sheet glass corner assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and as directed by Engineer-in-Charge.
125
-
-
... More
S&F in repairs Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-Charge.
125
-
-
... More
Demolition and breaking up 150 mm internal dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and laid in trenches including all fittings and accessories complete as specified and as directed by Engineer-in- charge
1632
-
-
... More
M&L for DWCPE (SN8) confirming to IS-16098,150 mm Nominal bore (160 mm OD) complete laiding and jointed incl testing along with necessary jointing material tees /union /socket etc complete as per manufacture instructions and complete all as specified and directed by Engineer-in- charge.
1632
-
-
... More
Material and labour for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in Concrete bed to drain pipes including packing under, and haunching against the sides of 150 mm pipes after they are laid and tested complete as specified and as directed by Engineer-in- charge
1632
-
-
... More
Material and labour for Cutting into existing manholes for connecting new drains 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete as specified and as directed by Engineer-in- charge
25
-
-
... More
Taking down eaves gutters and rain water PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in- charge
750
-
-
... More
Taking down any type of soil waste, vent pipe, rain water pipes (PVC/CI/AC any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc complete as specified and as directed by Engineer-in- charge
1088.4
-
-
... More
Supply & fixing 110mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.
Note:- Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.
1838
-
-
... More
Supply & fixing 75mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.
Note:- Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.
213
-
-
... More
Supply & fixing 40mm bore uPVC pipes grade 'B' single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.
500
-
-
... More
Supply & fixing in replacement of UPVC multifloor trap 75mm dia and 600mm long with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge.
Make : Astral / Prince / Finolex.
186
-
-
... More
Taking down cement plaster from brick walls/soffits of roof projections & chajjas /ceilings etc. including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
18410
-
-
... More
Material and labour for internal plastering 10mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed by the Engineer-in-Charge.
6880
-
-
... More
Material and labour for internal plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed by the Engineer-in-Charge.
493
-
-
... More
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick wall or concrete surfaces, finished even and fair including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, where directed complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately as Supply only)
8750
-
-
... More
Material and labour for rendering 5mm thick in cement mortar (1:3) onconcrete surface of ceiling, finished fair, even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
2680
-
-
... More
Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.
457
-
-
... More
Dismantling of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site and deposit where directed complete all as specified and as directed by Engineer-in-charge.
638.21
-
-
... More
Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
603.21
-
-
... More
All as per serial item No 19.00 here-in-before but except bricks complete all as specified and as directed by Engineer-in-charge.
Note : Old serviceable burnt clay / fly ash bricks retrieved from serial item No. 81.00 here-in-before shall be used under this item.
35
125
-
... More
Material and labour for cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
39.55
-
-
... More
Material and labour for cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and as directed by Engineer-in-charge.
16.51
-
-
... More
Material and labour for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in copings, kneelers, apex stones, bed plates, roof kerbs, mud stops and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed by Engineer-in-charge.
2.26
-
-
... More
Material and labour for 100mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-charge.
2475
-
-
... More
Supply and laying/fixing 60mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-35 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engineer-in-Charge.
2475
-
-
... More
Supply and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
34
-
-
... More
Demolition of cement concrete reinforced of any description such as roof slab, slab, beam, staircase, landing chajja, OHT staging, fins, shelves, etc, including reinforcement cut as required to facilitate demolition and prepare the surface to casting/jointing new including removing rubbish material from building and thrown in low lying empty area at any distance from the site complete all as specified and as directed by Engineer-in-Charge
83
-
-
... More
Material and labour for Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ.
33
-
-
... More
Material and labour for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ.
38
-
-
... More
Material and labour for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in chajja complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ.
12.48
-
-
... More
Material and labour for mild steel TMT bars 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
28505
-
-
... More
Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.
(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose)
1200
-
-
... More
S&F mild steel round bars 8 to 10mm dia as in tie bars fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete all as specified & as directed.
145.08
147
-
... More
Form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and as directed by Engineer-in- charge.
240
-
-
... More
Form work to chullah hoods, chajjas, troughs and similar items including edges rough finished complete all as specified and as directed by Engineer-in- charge.
160
-
-
... More
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished complete all as specified and as directed by Engineer-in- charge.
220
-
-
... More
Material and labour for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc, confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.
4578.75
-
-
... More
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer with using paint brush complete all as specified and as directed by Engineer-in- charge.
300
-
-
... More
Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 2mm thick wall care putty on new surfaces including preparation and complete specified and as directed by Engineer-in-Charge.
8750
-
-
... More
Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including complete removal of existing treatment complete specified and as directed by Engineer-in-Charge.
50000
-
-
... More
Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper (OBD) of approved shade/tint over & including 2mm thick white wall care putty complete all as specified & as directed by Engineer-in-Charge.
6875
-
-
... More
Material and labour for Preparation of new/existing plastered surfaces as in ceilings and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use over 2mm wall putty, white or tinted complete all as specified and as directed by Engineer-in-Charge.
2680
-
-
... More
Material and labour for Preparation of old ceiling including complete removal of existing treatment of any type/description from external/internal ceiling surfaces, soffits/ chajja/ roof projection surfaces etc., by Mechanical sander/grinder machine having suction vaccum bag and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use over 2mm wall putty, white or tinted complete all as specified and as directed by Engineer-in-Charge.
3200
-
-
... More
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cess pits, manholes, not exceeding 10 Sqm on plan and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engineer-in-charge.
1235.75
-
-
... More
Excavation in trenches, not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3.0 m in depth for foundations, shafts, wells, cess pits, manholes, not exceeding 10 Sqm on plan and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engineer-in-charge.
0.11
-
-
... More
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
953.9
-
-
... More
Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.
563.1
-
-
... More
Supply and fixing in replacement of gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
125
-
-
... More
Supply and fixing in replacement of PVC connection 15 mm size of length 450 mm with brass nuts of approved quality complete all as specified and as directed by Engineer-in-charge.
250
-
-
... More
Removing building materials etc. i.e broken construction material, plaster and like to a distance of 7 km at a suitable location specified by Engineer-in-charge.
2727
-
-
... More
Taking down carefully existing copper/aluminium point wiring (light/fan/sockets/bell/power point) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder including rusted/broken concealed conduit, junction and sunken boxes etc and making good disturbed surface of walls/floors etc complete all as specified and as directed by Engineer-in-Charge.
Note:- All material obtain from taking down shall be deposited at MES AGE store.
2345
-
-
... More
Material and labour for concealed Point wiring for one light point/fan point/bell point controlled by one switch (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size) concealed in wall, including inner and outer plates (cover plate white colour, any module as per requirements) suitable for fixing the modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) including fixing of switch/socket etc complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
Note:- (i) Where ever it is not feasible to cable drawn through existing PVC conduit in roof slab (for ceiling fan point only) due to blocked, casing caping in lieu of pipe shall be provided by contractor without any extra cost, cost for the same shall deemed to be included in the quoted unit rate.
3733
-
-
... More
All as per above Srl item No. 115.00 but for one socket out let 5/6 Amps point controlled by one switch (on same board) complete all as specified and as directed by Engineer-in-charge. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
630
-
-
... More
Material and labour for concealed Point wiring for one socket out let 5/6 Amps point controlled by one switch (on independant board) (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switche / socket, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).
585
-
-
... More
Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch/AC starter switch (on independant board) (using red, black and green colour wires as colour coding i.e for phase, netural, earth wire etc) complete with 4 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 25mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket/AC starter switch, including provn of 4 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, AC starter switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).
465
-
-
... More
Material and labour for concealed Point wiring for one light point controlled by two Nos- two way switch (using red, black and green colour wires as colour coding i.e for phase, netural etc) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switch, including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switches complete all as specified and as directed. (switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
104
-
-
... More
Supply only modular switch 6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
4793
-
-
... More
Supply only modular switch 6Amps, single pole, two way complete all as specified and as directed by Engineer-in-charge.
120
-
-
... More
Supply only modular switch 16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
465
-
-
... More
Supply only modular Bell Push switch, 6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.
155
-
-
... More
Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.
1840
-
-
... More
Supply only modular Socket outlet multipurpose type 16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.
465
-
-
... More
Supply and fixing modular White cover plate with frame, 1 module complete all as specified and as directed by Engineer-in charge.
74
-
-
... More
Supply and fixing modular White cover plate with frame, 2 module complete all as specified and as directed by Engineer-in charge.
146
-
-
... More
Supply and fixing modular White cover plate with frame, 3 module complete all as specified and as directed by Engineer-in charge.
1359
-
-
... More
Supply and fixing modular White cover plate with frame, 6 module complete all as specified and as directed by Engineer-in charge.
310
-
-
... More
Supply and fixing modular White cover plate with frame, 8 module complete all as specified and as directed by Engineer-in charge.
620
-
-
... More
Supply and fixing Metal flush box 1/2 module complete all as specified and as directed by Engineer-in charge.
220
-
-
... More
Supply and fixing Metal flush box 3 module complete all as specified and as directed by Engineer-in charge.
1359
-
-
... More
Supply and fixing Metal flush box 6 module complete all as specified and as directed by Engineer-in charge.
700
-
-
... More
Supply and fixing Metal flush box 8 module complete all as specified and as directed by Engineer-in charge.
424
-
-
... More
Supply and fixing Ceiling Rose, polycarbonate, isolated body, surface bakelite 3 terminal, 240 volts, 5/6 Amp complete all as specified and as directed.
1563
-
-
... More
Supply and fixing electric calling Bell Ding Dong type, AC 230 Volts single pole including making elctric connection complete all as specified and as directed by Engr-in-charge.
155
-
-
... More
Supply and fixing industrial socket metal clad plug and socket with MCB single pole 20 amps complete all as specified and as directed by Engr-in-charge.
155
-
-
... More
Supply and fixing lamp holder (ISI marked) polycarbonate cased body (B22 base), top line series, with back plate, 6Amps, complete all as specified and directed by Engineer-in-Charge.
1118
-
-
... More
Supply and fixing LED lamp minimum 3 star rated 9W LED B-22 base complete all as specified and directed by Engr-in-Charge with following specifications
(a) Lumen system efficacy of lamp should be minimum 100 Lumen per watt.
(b) Input Voltage range : 140 to 270 volts
(c) Temp operating range : Minus 10°C to Plus 45°C
(d) Power factor : Minimum 0.95
(e) CRI : Morethan 80
283
-
-
... More
Supply and fixing in replacement of MCB ‘C’ curve suitable for 240 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
1098
-
-
... More
Supply and fixing in replacement of MCB ‘C’ curve suitable for 240 volts AC supply, 06 to 32 Amps, DP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
278
-
-
... More
Supply and fixing in replacement of MCB ‘C’ curve suitable for 240 volts AC supply, 06 to 32 Amps, DP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
48
-
-
... More
Supply and fixing PVC blanking plate for fixing in MCB DB 4 way TPN/ 8 way DB SPN fixed at appropriate items of BOQ complete all as specified and directed by Engineer-in-charge
88
-
-
... More
Supply and fixing in replacement of sheet metal enclosure double door 08 way SPN 230 Volt ISI marked IP 43 complete with neutral and earth link and bus bar complete made out of CRCA steel sheet factory made complete all as specified and as directed by Engineer-in-charge
155
-
-
... More
Supply and fixing sheet metal enclosure double door DB made out of CRCA mild steel sheet surface with insulated material like polyster with epoxy powder coated surface mounting TPN 04 way 415 Volts ISI marked 250 Amps bus bar stove enameled dust and vermin proof IP 43 protection suitable for MCB frame, isolators and including connections with wire and cable complete all as specified and as directed by Engineer-in-charge
48
-
-
... More
Taking down carefully existing LED light of any size, and refixing the same after carrying out cleaning all the components of fitting including replacement of bolts, nuts and connection with flexible cable copper conductor twin core of size 23/0.2 mm upto ceiling rose/connector complete all as specified and as directed by Engineer-in-charge
615
-
-
... More
Material and labour for concealed sub main wiring (Two run for main i.e. phase and netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 4 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed by Engineer-in-charge.
Note :-Three run of 4 sqmm copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.
1500
-
-
... More
Material and labour for concealed sub main wiring (Two run for main i.e. phase and netural and one run for continues as earth wire connected to earth dolly etc., using red, black and green colour wires as colour coding) with 6 Sqmm single core, FRLSH PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (medium quality ISI marked), on independent circuit from panel/DB including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, complete all as specified and as directed by Engineer-in-charge.
Note :-Three run of 6 sqmm copper wire and one run conduit shall be measured as one RM length for payment but extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.
3100
-
-
... More
Supply and fixing LED tube light fitting polycarbonate housing 1 x 18/20 Watt, appx 4 feet long, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI : Minimum 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
375
-
-
... More
Supply and fixing LED light fitting 1 x 8/10 Watt, appx 2 feet long LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) CRCA pre coated housing with plastic end cap. (h) LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV. (l) CCT : Minimum 6000K (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
155
-
-
... More
Supply and fixing energy efficient LED security light fitting of 45 W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5 Sqmm, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket along wall including painting to bracket, MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, including taking down old unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)
Make Bajaj Cat part No ENXT P30L WHCRPCSD or Techno commercial equivalent in make mentioned in Appx 'B'
99
-
-
... More
Disconnecting electric connection and taking down carefully ceiling fan complete with blades, canopies, down rod etc. and deposited to AGE E/M (North) store yard complete all as specified and as directed by Engineer-in-charge.
316
-
-
... More
Supply and hanging /fixing ceiling fan 1200 mm sweep color white AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, minimum 30W (± 10%), Temperature rise 40 degree maximum with remote and remote holder (remote holder fixed on wall where directed), 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan complete all as specified. Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account
456
-
-
... More
Supply and fixing exhaust fan (heavy duty) PVC body, AC single Phase 230V, 50 Cycle per second, size 250mm sweep with blades and frame including self closing PVC louvers off mode protection against birds etc mounted in suitable opening arrangement including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to fan, (not exceeding 0.5 mtr long), and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- Serial Number of exhaust fan issued by Engr-In-Charge and GE Office name shall also be written on fan with red colour permanent marker.
155
-
-
... More
Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50 Cycle per second, size 300mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement. including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to fan, (not exceeding 0.5 mtr long), and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- Serial Number of exhaust fan issued by Engr-In-Charge and GE Office name shall also be written on fan with red colour permanent marker.
155
-
-
... More
Material and labour for painting of existing of serviceable Geyser with synthetic enamel paint as per Manufacturer recommendation by using spray paint equipment including filling cavities with pillar and bottom of Geyser one coat after cleaning all dust including disconnecting electric connection and taking down carefully geyser of any capacity and deposited to AGE E/M (North) store yard complete all as specified and as directed by Engineer-in-charge.
68
-
-
... More
Supply, installing, commissioning and testing of electric water heater (Geyser, vertical type) storage type ABS body of capacity 25 litre with 2kw heating element, BEE approved 5 Star rating, 230 V, single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as having indicating light, safety valve, thermostat, NRV, connection piece PVC connection 600mm long heavy duty suitable for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable and making connections with and including 15 amp top plug, 04 Nos suitable size mild steel L-Hook fastener with washer for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge. Note (a) Contractor shall submit original purchase voucher and warranty card as recommended by manufacturer. (b) Serial Number of geyser issued by Engr-In-Charge and GE Office name shall also be written on geyser with red colour permanent marker or paint, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
87
-
-
... More
Taking down Electric meter from its existing position by disconnecting and Re-fixing the same position after the repair work complete all as directed by Engr -in-Charge.
155
-
-
... More
Supply and laying in repairs XLPE LT Cable of size 25 Sqmm, 4 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge. Note :- (i) Excavation, earth work, protection pipe, cutting of road and protection pipe shall be measured & paid separately under respective item of Schedule/BOQ.) (ii) Old LT cable any size and type will be deposited at MES AGE E/M (North) store yard.
1180
-
-
... More
Supply and fixing Double wall corrigated pipe outer dia 63mm dia and inner dia 50mm for cable protection complete all as specified and directed by Engineer- In - Charge.
1050
-
-
... More
Supply and fixing GI tubing light grade of size 50 mm bore, ISI marked, fixed along poles/walls or laid in trenches, under road, inserting in bore hole for cable protection including fittings (elbow, tee, socket etc) complete all as specified and as directed.
(Note:- Excavation and earthwork as required shall be measured and paid separately under respective item of Sch.)
78
-
-
... More
Boring of holes under road, pavement, hardstanding by using trenchless boring machine or by manual manpower suitable for inserting GI pipe any dia upto 50mm including removal of surplus soil and making good disturbed surface complete all as specified and as directed.
NOTE:- Pipe for inserting as required shall be measured and paid for separately.
52
-
-
... More
Material and labour for extra wiring for inverter socket out going to switch board/DB with 2.5 Sqmm single core, FRLSH PVC (using colour coding as directed) insulated multistrand copper conductor drawn through existing conduit (conduit for point wiring already catered in point wiring item of BOQ) including making connection to switch board/DB and inverter socket) complete all as specified and as directed by Engineer-in-charge.
2325
-
-
... More
Supply and fixing plug top 5/6 Amp 3 pin good quality suitable for 240 volts, AC supply for inverter socket complete all as specified and as directed by Engineer-in-charge.
175
-
-
... More
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI medium grade pipe upto test point or upto main switch board, fixing with 02 Nos nuts and bolts. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) including taking out/dismantling old unserviceable earthing system and old material deposited at MES AGE store complete all as specified and as directed by Engineer-in-charge.
Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
78
-
-
... More
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store (Deposited to MES Store Yard of AGE E/M (N) Bikaner) and (Surface of floor etc) of size 20mm bore complete all as directed by Engineer-in-charge.
970
-
-
... More
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store (Deposited to MES Store Yard of AGE E/M (N) Bikaner) and (Surface of floor etc) of size 25mm bore complete all as directed by Engineer-in-charge.
800
-
-
... More
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store (Deposited to MES Store Yard of AGE E/M (N) Bikaner) and (Surface of floor etc) of size 40/50mm bore complete all as directed by Engineer-in-charge.
225
-
-
... More
Dismantling and taking up/down old unserviceable existing Gate valve 20/25mm from existing valve pit and Deposited to MES Store Yard of AGE E/M (N) Bikaner and make good disturbed area complete all as directed by Engineer-in-charge.
1725
-
-
... More
Dismantling and taking up/down old unserviceable existing Gate valve 40/50mm from existing valve pit and Deposited to MES Store Yard of AGE E/M (N) Bikaner and make good disturbed area complete all as directed by Engineer-in-charge.
16
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 15 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint laid in trenches /under road/floor etc including cutting and threading of pipe as required complete all as specified and as directed by Engineer-in- charge.
(Note:- Excavation and Earth work shall be measured and paid separately under respective item of BOQ)
800
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 20mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint laid in trenches /under road/floor etc including cutting and threading of pipe as required complete all as specified and as directed by Engineer-in- charge.
(Note:- Excavation and Earth work shall be measured and paid separately under respective item of BOQ)
1535
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 25 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint laid in trenches /under road/floor etc including cutting and threading of pipe as required complete all as specified and as directed by Engineer-in- charge.
(Note:- Excavation and Earth work shall be measured and paid separately under respective item of BOQ)
755
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 40 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint laid in trenches /under road/floor etc including cutting and threading of pipe as required complete all as specified and as directed by Engineer-in- charge.
(Note:- Excavation and Earth work shall be measured and paid separately under respective item of BOQ)
95
-
-
... More
Supply, laying, jointing and testing of galvanized steel water tubing 50 mm bore ISI marked medium grade including fittings Viz Tees, Socket, bends, elbows, union nipple etc screwed and socketed joint laid in trenches /under road/floor etc including cutting and threading of pipe as required complete all as specified and as directed by Engineer-in- charge.
(Note:- Excavation and Earth work shall be measured and paid separately under respective item of BOQ)
130
-
-
... More
Supply and fixing gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 15mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
98
-
-
... More
Supply and fixing gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 25mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply and fixing gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 40mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
Supply and fixing gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 50mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
Material and labour for cutting of road /hard standing for laying of pipe lines and making good the damage to match with the existing surface not exc 1.5 mtr in wide and not exc 1.5 mtr in depth and getting out complete all as specified and directed.
54
-
-
... More
M&L for Construction of valve pit having internal size 45cm X 45 cm X 70cm (internal dimension) of brick masonry including necessary excavation and earth work (in soft/loose soil), PCC coping MS angle iron frame with angle iron of size 40x40x6mm and cover of MS sheet 3 mm thick with handle & locking arrangement brick work and plastering etc. complete all as specified and shown on drawings.
13
-
-
... More
M&L for High galvanized mast light suitable for 6 to 9 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation as per height.
2
-
-
... More
Supply and laying XLPE LT Cable of size 25 Sqmm, 4 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS- 7098 (Part-I) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge. Note :- (i) Excavation, earth work, cutting of road and protection pipe shall be measured & paid separately under respective item of Schedule/BOQ.)
80
-
-
... More
Supply and fixing GI tubing light grade of size 40 mm bore, ISI marked, fixed along poles/walls or laid in trenches, under road, inserting in bore hole for cable protection including fittings (elbow, tee, socket etc) complete all as specified and as directed.
(Note:- Excavation and earthwork as required shall be measured and paid separately under respective item of Sch.)
18
-
-
... More
Supply and fixSupply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed by Engineer -In-Charge.
16
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%