Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 84,160Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Special Repairs To Bldg No. Np-03 Of Bhaskar Iv, T-13 And T-14 Of Fd Hosp And Certain Other Sanctioned Works At Mamun Cantt Under Ge (s) Mamun
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_691697_1Tender No
GE(S)/M-62/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified & directed.
161.5
-
-
... More
Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed
708
-
-
... More
Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each complete all as specified & directed.
41
-
-
... More
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each complete all as specified & directed.
18
-
-
... More
M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified & directed.
116.5
-
-
... More
All as per Srl item No. 08 here in before but except bricks. Note:- Serviceable bricks retrieved by demolition of brick work shall be re-used.
0.5
-
-
... More
M&L for Pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
39
-
-
... More
M&L for Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
76
-
-
... More
M&L for PCC 1:3:6 nominal mix, type C-0 using 12.5mm graded crushed stone aggregate as in filling of pressed steel door frames/chowkats complete all as specified & directed.
0.8
-
-
... More
S&F 35mm thick 2nd class hard wood, glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I complete all as specified & directed.
14
-
-
... More
S & F 35mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified & directed.
28
-
-
... More
Supply and fixing window made of pre painted steel (base steel as per IS 513 of 0.56mm thick D quality galvanized as per IS 277 with zinc of 120 GSM), primer coted with epoxy primer of 5-7 micron thick, finish pinted with a polyester paint of 12-16 micron thck and back coated with 5-7 micron thick alkyd backer.Section for outer frame should be of 72x55mm, centre mulion should be of 72x 50mm, section for fixed glass beading should be of 12x12mm and secion for shutter should be of 48x25mm, Outer frame and mullion section to have rebte for glazed shutter, fly mesh and 20mm provision for guard bar/grill fly mesh shutter section should be of 20x40mm .The section are to be cut to length mitre joined with corner bracket,centre mullion to be fixed with mulion cap,Elixir or equivalent stay,handle 2 nos of heavy duty stainless steel pivot hinge shall be provided per shutter.The window should be panelled with 4mm thick plain float glass and SS mesh for Fly mesh shutter 304 grade, Rubber gaskets areprovided all around the glass.The above frame should be fixed to the concrete/masonary wall by means of selfexpandind screws including 10mm square guard bars with 152.4 mm pitch Complete for finished item of work all as specified & directed.
44.32
-
-
... More
M&L for framed work as in grills, gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde-E-165. Note : Grills shall be fixed in wall with steel screws not less than 100 mm long as inner face of aluminium windows.
200
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ choowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)
fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws
having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with
property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs fasteners shall be paid for separately) complete all as specified & directed.
79
-
-
... More
S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (poly urathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.
10
-
-
... More
S & F hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified & directed.
8
-
-
... More
S&F factory made 18mm ( + 0.7mm) thick WPC cupboard shutter, prelaminated one side with coating of ultra voilet chemical, glossy/mat finish incl. 100% termite/water proof, fire retardant, Eco friendly, density not less than 600Kg/cbm finish at all edges for making edges lipping/bending, complete as per direction of Engineer-in-Charge and manufacturer's specifications.
12
-
-
... More
S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm complete all as specified & directed.
22
-
-
... More
S&F Stainless steel fasteners of size 75mm long steel supports, fixed to walls, complete all as specified & directed.
20
-
-
... More
S&F Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters complete all as specified & directed.
16
-
-
... More
S&F Butt hinges 100 mm long, stainless steel, medium weight and fixed complete all as specified & directed.
99
-
-
... More
S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed complete all as specified and directed.
19
-
-
... More
S&F Aluminium, anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
66
-
-
... More
S&F Aluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.
16
-
-
... More
S&F Aluminium, anodised, handles 125 mm of extruded section and fixed complete all as specified and directed.
64
-
-
... More
S&F floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed
24
-
-
... More
S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame complete all as specified & directed.
8
-
-
... More
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples complete all as specified & directed.
13.2
-
-
... More
S&F "as in repair" 25mm outer dia stainless steel decorative drapery rod of thickness 20 guage with stainless steel brackets near to ends with stainless steel finials with adopter for 25 mm dia drapery rod at both ends complete all as specified and directed.
60
-
-
... More
Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings complete all as specified and directed.
80
-
-
... More
M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 20 cm girth in brick walls complete all as specified & directed.
12
-
-
... More
Supply & Fixed steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified & directed.
70
-
-
... More
Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.
70
-
-
... More
Supply & Fixed steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.
215
-
-
... More
Fixing only old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed.
Note :- Servicable pipe retrieved by taking up / down existing one shall be used.
10
-
-
... More
S&F GI pipe 32 mm dia light grade in short length as spout pipe in sunken floor slab laid in slope to brick wall with PCC 1: 2:4 type B -1 using 20 mm graded stone aggregate complete all as specified and directed.
5
-
-
... More
Supplied and fixed in repairs Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc. complete all as specified and as directed.
11
-
-
... More
Supply & fixed in repairsStop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed complete all as specified & directed.
8
-
-
... More
Supply & fixed in repairs Concealed Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified & directed.
4
-
-
... More
Supply & fixed in repairs Bib tap 15 mm bore long body, Brass CP, fancy type (long shank )., with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed complete all as specified.
28
-
-
... More
Supply & fixed in repair Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type). screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore andcomplete all as specified.
22
-
-
... More
S&F in repairs 15mm dia pillar tap cast copper alloy fancy type capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc. complete all as specified and directed.
4
-
-
... More
Supply & fixed in repair CP Brass shower rose 200x200 mm size with flexible brass arm 450-550mm long complete all as specified and directed.
7
-
-
... More
Supply & fixed in repair Soap dish (material SS finish, glossy) fixed to plugs with CP brass screws complete all as specified and directed.
9
-
-
... More
Supply & fixed in repair Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc.complete all as specified and directed.
6
-
-
... More
Supply & fixed in repair bevelled edge mirror of selected quality glass, mounted on 6 mm dia SS clamp on counter complete all as specified.
7
-
-
... More
Supplied and fixed in repair CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed.
5
-
-
... More
Supply & fixed in repair Push botton type dual flush type PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified & directed.
9
-
-
... More
Supply & fixed in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 400mmx300mmx 180mm complete all as specified and directed.
4
-
-
... More
Supply & fixed in repair Vitreous china wash basin, oval shape counter top, white , size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, flexible 32 mm dia complete all as specified & directed.
7
-
-
... More
Supply & fixed in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm 2 suitable for waste pipe etc fixed complete to walls, ceilings or in floors etc. complete all as specified & directed.
11
-
-
... More
Supply & fixed in repair Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.
9
-
-
... More
Supply & fixed in repair PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified & directed.
22
-
-
... More
Supply & fixed in repair PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement fixed in repair complete all as specified & directed.
18
-
-
... More
Supply & fixed PVC grating square, 150 mm (Hinge pattern and with or without hole) complete all as specified & directed.
18
-
-
... More
Supply & fixed in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
24
-
-
... More
Supply & fixed in repair 110 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified & directed.
6
-
-
... More
Supply & fixed in repair 110 mm bore PVC (SWR) branch piece , with or without excess door, single (Single Y) equal or unequal.with excess door complete all as specified & directed.
2
-
-
... More
Supply & fixed in repair 110 mm bore PVC (SWR) branch piece, with excess door, double (double Y) equal or unequal, with or without excess door complete all as specified & directed.
2
-
-
... More
Supply & fixed in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal,with excess door complete all as specified & directed.
2
-
-
... More
Supply & fixed 110 mm bore PVC (SWR) vent cowl complete all as specified & directed.
2
-
-
... More
Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor complete all as specified & directed.
4
-
-
... More
Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor complete all as specified & directed.
16
-
-
... More
Supply & fixed in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
18
-
-
... More
Supply & fixed in repair 75 mm bore PVC (SWR) bend any radius, with or without excess door complete all as specified & directed.
4
-
-
... More
Supply & fixed in repair 75 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal ,with excess door complete all as specified & directed.
2
-
-
... More
Supply & fixed in repair 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal.with excess door complete all as specified & directed.
2
-
-
... More
Supply & fixed in repair 75 mm bore PVC (SWR) junction single, (Single T) ,with excess door, equal or unequal complete all as specified & directed.
2
-
-
... More
M&L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6 complete all as specified and directed .
144
-
-
... More
M&L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4 complete all as specified and directed .
11
-
-
... More
M&L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6 complete all as specified and directed .
60
-
-
... More
M&L for Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.
245
-
-
... More
M&L for 18 mm thick green marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer complete all as specified and directed.
7.5
-
-
... More
M&L for Machine cut Kota stone slab flooring not less than 18-20mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine complete all as specified & directed..
62
-
-
... More
M&L for as in repairs for Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine complete all as specified.
20
-
-
... More
M&L for as in repairs for Machine Pressed precast concrete interlocking paver block any shape and size M-35 Grade, 60mm thick confirming to IS-15658-2006 with grey cement and pigments laid over and including 50mm thick sand cushioning complete all as specified & directed.
125
-
-
... More
M&L for as in repairs for Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified & directed.
5.5
-
-
... More
M&L for 75 mm thick cement concrete type C-2, 1:3:6 ( using 40mm graded stone aggregate) as in Sub-base to floor finishes, surface finished even and rough to receive top floor finish complete all as specified & directed.
110
-
-
... More
M&L for rendering 5mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement complete all as specified & directed..
20
-
-
... More
M&L for rendering 10 mm thick cement plaster in CM 1:6 on fair face of brick work or concrete surface , finished even and smooth without using extra cement complete all as specified & directed.
150
-
-
... More
M&L for 15mm thick rendering cement plaster in CM 1:6 on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement complete all as specified and directed.
150
-
-
... More
Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 complete all as specified and directed.
30
-
-
... More
M&L for 75 mm thick cement concrete 1:3:6, type C1 (using 20mm graded agg) as in plinth protection finished even and smooth using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified & directed.
159
-
-
... More
M&L for Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade with and including priming surface with chalk whitening complete all as specified & directed.
80
-
-
... More
M&L for preparation of newly plastered external surfaces of walls and applying two coats of cement based paint, white or tinted including curing before and after paint complete all as specified and directed.
390
-
-
... More
M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified & directed.
120
-
-
... More
M & L for three coat of white wash on newly plaster surface of wall including preparation of surface complete all as specified & directed
70
-
-
... More
M&L for preparation new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified & directed.
105
-
-
... More
M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.
84
-
-
... More
M&L for Preparation of old plastered surfaces of walls by scrapping down smoke roots, molds salts and treading oil and greasy spots with wire brush incl removing all nails & washing with clean water down and applying one coat of washable Distemper, white or tinted complete all as specified & directed.
450
-
-
... More
M&L for prepration of old steel surfaces of any description, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint white or tinted complete all as specified & directed.
24
-
-
... More
M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of white wash complete all as specified and directed.
220
-
-
... More
M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying one coat of cement based paint, white or tinted including curing before & after paint complete all as specified and directed.
219
-
-
... More
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, slightly rounded or chamferred angles and throating including necessary form work complete all as specified & directed.
9
-
-
... More
M&L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair as in roof padding including prepration of surface and mix with water proofing compound and finished even and fair without using extra cement complete all as specified and directed. (Note : WPC will measured and paid separately as supply only).
75
-
-
... More
M&L for complete removal of the existing roof treatment any nos of layers taken out membrane, PCC Padding/roof, tiles etc including grabbing up of tree roots , roughing and prepration surfaces of old concrete floor by picking , scrubbing down with steel brushes, sweeping, cleaning and washing down with water to remove dust etc. and applying the following Roof treatment complete all as specified and directed. (a) Applying 1st course of 15 mm thick screed bed with cement mortar 1:4 over old concrete surface (b) Applying 2nd course of bitumenous primer @ 0.4 kg/Square Metre conforming to IS-3384 over screed bed .
(c) Applying 3rd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre.
(d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric 3mm thick, weight not less than 3.6 kg/Square Metre with 160 Grams/Square Metre non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane shall be laid with LPG torch and overlap sealed and finished neat .
(e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre . (f) Applying a coat of bitumenous based aluminium paint as finishing coat.
80
-
-
... More
M&L for mild steel TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified & directed.
50
-
-
... More
M&L for Precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in cover slab set in CM 1:6 complete all as specified and directed. Note : (Reinforcement shall be measured and paid separately).
0.5
-
-
... More
M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surfaces of sunken floor finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed
Note :- (WPC shall be measured and paid separately)
8
-
-
... More
M&L for two coats of bitumen blown any grade, applied hot, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
8
-
-
... More
Supply only liquid water proofing compound complete all as specified & directed.
8
-
-
... More
M&L for Cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in mass filling in sunken slab of toilets complete all as specified.
3
-
-
... More
S&F stainless steel peg set of six fixed with machine screws and wooden and plastic cleats (minium wt 190gms) complete all as specified & directed.
8
-
-
... More
M&L for Providing and injecting chemical emulsion for termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified & directed.
40
-
-
... More
M&L for Providing and injecting chemical emulsion for Post Constructional along the external wall along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed.
121
-
-
... More
Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and crew withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed.
12.5
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onces exc 1.5 Sqm complete all as specified & directed.
1
-
-
... More
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed.
1
-
-
... More
S&F in repair Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed complete all as specified & directed.
2
-
-
... More
Supply & fixed , Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified & directed.
3
-
-
... More
S&F in repair CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.
3
-
-
... More
S&F Centre hole basin mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.
3
-
-
... More
Supply & fixed ,Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of CP coupling, waste pipe and cp brass spreder all necessary fittings complete all as specified and directed.
3
-
-
... More
Supply & fixed 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.
3
-
-
... More
M&L 18 to 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required complete all as specified & directed.
1.5
-
-
... More
M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement complete all as specified and directed.
120
-
-
... More
M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying two coat of cement based paint, white or tinted including curing before & after paint complete all as specified and directed.
100
-
-
... More
M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying two coats of white wash complete all as specified and directed.
25
-
-
... More
M&L for 15 mm thick plaster in CM 1:4 mixed with intergral water proofing compound @ 200ml per 50 kg of cement bag and applying 75 mm thick padding of PCC M-20 Nominal Mix (1:1.5:3) of using 12.5 mm crushed graded stone aggregate and coving at junction of wall and floor with same concrete mix, the surface shall then be cured and allowed to dry and applying Epoxy Resins Coating, polymer Modified Cementation coating like brush bond of frsroc, pedilite and bostic as per manufactures instruction both on floor as well as on wall complete all as specified and directed.
15
-
-
... More
M&L for RCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in kitchen platform, shelves, cover slab including necessary form work to soffits & sides of concrete complete all as specified & directed.
0.2
-
-
... More
S&F mild steel TMT bars FE 500 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality complete all as specified & directed..
20
-
-
... More
Supply & fixed CP Brass shower rose 200x200 mm size with with flexible brass arm 450-550mm long for 5 mm bore pipe complete complete all as specified & directed.
3
-
-
... More
Excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width) including getting out in any type of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified & directed.
Note:- The unit rate quoted by contractor shall include the cost of returning filling and removal of surplus soil upto 50metre from, the starting point. the contractor shall keep this aspect in mind while quoting the rate.
241
-
-
... More
Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.
91
-
-
... More
Removing surplus excavated spoil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting pointcomplete all as specified & directed.
42
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified & directed.
49
-
-
... More
M&L for dry clean fine river sand as in sand cushioning to underground cable and under paver blocks, including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.
20.7
-
-
... More
Supply & laying sub class B bricks old size, in trenches, laid dry, flat, over sand cushioning for protection of cable, with length of brick equal to width of protection complete all as specified and directed.
Note:- Sand cushioning shall be measured and paid for separately.
2.04
-
-
... More
Supply, laying & jointing electric cable, LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty, with aluminium conductor of size 35 Sqmm 3.5 core in trenches or fixed to wall/pole or passing through ducts or pipe, including taking out existing cable complete all as specified and directed.
58
-
-
... More
Supply, laying & jointing electric cable, LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty, with aluminium conductor of size 16 Sqmm 2 core in trenches or fixed to wall/pole or passing through ducts or pipe, including taking out existing cable complete all as specified and directed.
230
-
-
... More
supplying and laying for GI tubing light grade 40 mm dia for protection of cable with all fittings and fixed to pole or laid in ground complete all as specified & directed.
42
-
-
... More
S&F for gun metal gate valve 20 mm dia with iron wheel head, screwed both ends for pipe fixing heavy duty complete all as specified & directed.
7
-
-
... More
M& L for cutting to existing GI fittings 25/40 mm dia (existing pipe) for addn/altn branch connection and inserting of T complete etc.complete all as specified & directed.
7
-
-
... More
Supply and laying 600mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified & directed.
8
-
-
... More
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed.
35
-
-
... More
M&L for rendering 12mm thick plaster in cement mortar 1:4 on fair faces brick surfaces finished even and smooth without using extra cement complete all as specified.
371
-
-
... More
M&L for Plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified & directed.
5
-
-
... More
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and as directed. Note:- Inner girth only shall be measured for payment.
265
-
-
... More
M&L for rendering 15mm thick plaster on fair faces of brick /concrete surfaces in cm (1:6), finished even and fair (Without using extra cement) complete all as specified & directed.
100
-
-
... More
M&L for rendering 15mm thick plaster in CM 1:4 on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixed with and including liquid WPC @ 200ml/bag of cement, complete all as specified and directed.
120
-
-
... More
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concretec complete all as specified & directed.
1.5
-
-
... More
M&L for Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base / sub floor, surfsces finished even and rough to receive floor top finish etc complete all as specified & directed.
6
-
-
... More
M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified & directed.
2.8
-
-
... More
M&L for roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc. complete all as specified & directed.
550
-
-
... More
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws complete all as specified & directed.
60
-
-
... More
S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified & directed.
420
-
-
... More
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 20 cm girth in brick walls complete all as specified & directed.
28
-
-
... More
S&F 1.00mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete all as specified & directed.
14
-
-
... More
S&F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl dismantelling of existing valley/gutter etc all as specified and directed.
5
-
-
... More
S&F Bird proofing block of spikes of material polycarbonated plastic/PVC, Pesticide free, high quality spike for pigeon/bird ledge protection upto 150mm , length of spike should not be less than 150mm fixed to steel member/masonry work with necessary adhesive/screw gitti etc at height upto and above 10 m including necessary scaffolding complete all as specified and directed.
1700
-
-
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified & directed.
151
-
-
... More
M&L for point wiring with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators/socket /bell push etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke multistranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall,making good the disturbed surfaces to match with the existing complete all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note :In ceiling Portion surface conduit wiring shall be carried out complete all as specified & directed.
94
-
-
... More
All as per description of serial item No. 155 here in before butone light point control by two way switch complete all as specified and directed.
2
-
-
... More
All as per description of serial item No. 155 here in before but one 5 pin socket out let 5/6 Amps on same board with other switches complete all as specified and directed.
19
-
-
... More
M&L for point wiring for one 5 pin 6 amps socket point controlled by one switch 6 amps on independent board with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches/socket etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note : In ceiling Portion surface conduit wiring shall be carried out.
16
-
-
... More
All as per description of serial item No. 158 here in before but with 4 sqmm FRLS cable PVC insulated unsheathed multistrand for 2 in 1 15/16 amp multipurpose socket outlet/metal plug top including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete.
12
-
-
... More
All as per description of serial item No. 158 here in before but with 4 sqmm FRLS cable PVC insulated unsheathed multistrand for gyser sheet metal plug socket outlet/metal plug top including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete.
7
-
-
... More
M&L for point wiring for one 2 in 1 15/16 amps socket point controlled by one switch 16 amps on independent board with PVC insulated fire retardant low smoke multistranded copper conductor cable of 4 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches/socket etc) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 4 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note :In ceiling Portion, wiring shall be carried out in surface conduit. complete all as specified & directed.
3
-
-
... More
S&F Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.
123
-
-
... More
S&F two way switch piano, flush button, single pole two way 6 amps 240 Volt with polycarbonate body complete all as specified and directed.
4
-
-
... More
S&F Bell push switch piano flush button single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified & directed.
4
-
-
... More
S&F socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.
15
-
-
... More
S&F multi purpose socket outlet for 2 & 3 pin, 6A, flush type complete all as specified and directed.
35
-
-
... More
S&F switch piano, flush type, single pole, one way, 16 Amps 230 Volts complete all as specified and directed.
15
-
-
... More
S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed.
12
-
-
... More
M&L for submain wiring with 2 run of single core, 6 sqmm PVC insulated and unsheathed, multi stranded copper conductor cable FRLS using colour code for phase red and neutral black with and including 6 sqmm PVC insulated and unsheathed FRLS conductor multi stranded cable in green colour connected to common earth point and connected to earth dolly drawn through PVC rigid conduit of suitable size, heavy grade (ISI marked) with and including all accessories, fixed to surface / recessed complete all as specified and directed.
Note:-
1. Proper colour coding is to be followed as per IS Specification.
2.Two runs of single core cable with one run of earth cable of conduit shall be measured as one RM.
3. Cutting chases for submain wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item.
120
-
-
... More
S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI (Marked) complete all as specified & directed.
50
-
-
... More
Supply and fixing Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
19
-
-
... More
Supply and fixing LED Lamp 9 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer - in - Charge.
19
-
-
... More
Supply & fixing for 1x20 watt LED 6500K tube light fittings (4 feet long),Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.
28
-
-
... More
Supply and fixing LED light fittings mirror type with high out put diffuser 2 feet .10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
7
-
-
... More
S&F LED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified & directed.
9
-
-
... More
Supply and fixing of decorative wall light white in colour made up of poly carbonate suitable for 9 watt retrofit LED Lamp complete all as specified and directed.
12
-
-
... More
Supply & Fixing building security LED light luminaire 25 W, IP 66, AC 230 volts,made up of pressure di cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including suitabe size of bracket of light grade pipe for mounting of fitting along with clamps, nut bolts and washers complete all as specified & directed.
1
-
-
... More
Note for Item No 172 to 177 :- 1. Driver should be potted anti-vibration types.
2. LM-79 and LM-80test report with lakh burning hours LED life from NABL lab shuld be provided.
3. CRI ( Colour Rendering Index) of fixture shall be 70.
4. CCT (Colour Co-related Temprature of fixture shall be 5700K + 300K). 5. System Lumen Efficiency shall be 100 Lm/W.
6. 10 KV separate surge protection shall be provided as a part of fitting
7. Lenses shall be modular type.
8. PCB used shall be MC PCB type.9. CA No shall be written on each fitting before installation.
10. The Name of Manufacturer to be emborssed on the fitting.
-
-
-
... More
Note for Item no 172 to 177 :- Contd..
11. The fittings shall have arrangement so that maintenance required, if any can be carried out from top cover. 12.The defect libility period of LED lights shall be 05 years from the certified date of completion and the contractor shall replace/ repair the defective fitting with in 07 days after handing over the replacement. 13. A guarantee of 05 years shall be provided by contractor, supported by OEM covered all parts of luminaire. Contractor shall deposit security on this account @ 5% of work done against these items otherwise the same shall be deducted from the dues payable to him in RAR/ Final Bill.
-
-
-
... More
S&F Bell, Ding Dong AC. 230 volts, single pole complete all as specified & directed.
4
-
-
... More
S & F sheet metal enclousers with single pole and neutral 240 volt , 20/32 Amps, C- Series with two pin and earth plug and socket plug top complete with single pole MCBs complete all as specified & directed.
7
-
-
... More
S & F in repairs of SPN 8 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed
3
-
-
... More
Supply and fix in repairs Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 12- way, 240 volts complete all as specified and directed.
4
-
-
... More
Supply and fixing in repair MCB single pole and nuetral 63 Amps, 240 volts, B-series complete all as specified and directed.
4
-
-
... More
Supply and fixing in repair MCB single pole 6 to 32 Amps, 240 volts, B-series complete all as specified & directed..
61
-
-
... More
M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I complete all as specified & directed.
4
-
-
... More
S&F as in repair prewired VTPN Distribution board of size not less than 750mmx470mm with provision for MCCB as incommer 63 A 04 pole IP 54 ,04way(for incomming MCCB & outgoing MCBs), with copper busbar for each phase, with Neutral bar, Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 63 Amps MCCB, 50 KA, 4 pole, as incomer and SP MCB's of cap 6-32amps as outgoing complete all as specified & directed.
Note: Rate of MCCBs and MCB, cutting, chasing, grouting in wall are included in above rate.
1
-
-
... More
M&L for repair to unservicable defective electric meter 10 to 20 Amps single phase through an company, authorised service providerby replacing defective PCB board, indicator display control push wiring and sealing the meter & terminal connections including taking out defective meter from existing location & refixing in same position after repair complete all as specified and directed. Notes:- (i) Spare part items to be included in qoated rate. (ii) Contractor will provide the written warranty for one year.
4
-
-
... More
S&F in repairs sheet moulded compound (SMC) meter box fire retardant type of size not less than 600mmx500mmx150mm to enclose 04 nos single phase electric meters with hinged type front operated door having transparent acrylic sheet and proper locking arrangement and flush mounting in wall incl refixing the serviceable electric meters dismentaling and making electrical connections inciuding cleaning of distrubed areas and making good the disturbed surface and matching with existing surface complete all as directed. Note : Rate quoted shall deemed to be in unit quoted rate of the item included taking down existing electric meter and refixed in new meter box with proper electrical connection complete all as specified & directed.
1
-
-
... More
Taking down ceilling fan by disconnecting from ceilling rose, dismaintling blades & hanging ceilling fan back after repair including re-fixing of blades, making of electric connections complete all as specified and directed.
8
-
-
... More
M&L for servicing of ceiling fans of capacity 1200/1400mm, dismantling, cleaning/checking, greasing/oiling of bush and bearings, replacement of defective parts viz. set of split pins, cotter pins, blade screws, canopy screws of suitable size including replacement of PVC fan box round sheet as required on site complete all as specified and directed.
(Note :- Rewinding and unserviceable parts other than specified in this items if any will be measured seperately).
3
-
-
... More
M&L for dismantling and taking out burnt winding by cutting, cleaning slouts and re-winding of ceiling fan motor 1400/1200 mm sweep any type with super enameled heat resistant copper winding wire of gauge 35/36 SWG including, sleeve work, varnishing with 1st class insulation, greasing, threading, lathe work, connection with flexible wire 0.472 mm copper wire upto connector block and re-assembling and testing for 4 Hrs after repair complete all as specified and directed. -
Notes :- (i) Fan shall be collected by the contractor from concened unit at thier own arrangement.
(ii) Motor shall be wound with machine only and repair of fan shall be undertaken inside complex / office of GE (S) Mamun. (iii) Super enameled copper winding wire of Khaitan/RPG/KEI or equivallent make shall only be used. (iv) Total weight of winding wire should not be less than 200 gm per fan.
5
-
-
... More
Supply only gun metal bush of ceiling fan of size 1200/1400 mm sweep as per esixting size complete all as specified and directed.
6
-
-
... More
Supply only capacitor AC 440volts 2.5 mfd with copper wire terminal incl PVC clamp oil filed ISI marked complete all as specified and directed.
8
-
-
... More
Supply only ball bearing suitable for ceiling fan/exhaust fan/wall/pedestal fan any type complete all as specified and directed.
7
-
-
... More
Supply only shackle assy kit (rubber real -01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.
5
-
-
... More
Supply only ceiling fan blades made of MS sheet duly powder coated, thickness not less than 1.00 mm, suitable for 1400/1200mm sweep ceiling fan of any make complete all as specified and directed.
5
-
-
... More
Supply only down rod made of MS pipe Meduim Grade 15 mm bore ceiling fan duly spray painted complete with split pin, hanging clamp and rubber real ( length of rod not less than 45 cm and not more than 60 cm) complete all as specified and directed.
4
-
-
... More
Supply only superior quality PVC canopy top & bottom of ceiling fan as per existing size & shape complete all as specified and directed.
8
-
-
... More
M&L for removing old paint of ceiling fan 1200-1400mm sweep by scraping with sand paper including preparation of surfaces by cleaning, removing oil/grease etc. filling cavities with filter and applying two coats of heat resistant high quality synthetic enamel paint at workshop by spray painting incl writing MES No complete all as specified & directed.
Note:- Paint quality and colour shall be got approved from Engr-in-charge.
8
-
-
... More
Supply and fixing in repairs flexible cable PVC insulated and overall sheathed with copper conductor 3 core of size 0.5 sqmm complete all as specified and directed.
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%