Military Engineer Services Tender

Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

M&L for brickwork with Fly Ash Bricks (old size) as in half brick thick wall straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified and directed.

M&L for rendering 10mm thick plaster in cement mortar 1:6, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 100 mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- MS hold fasts/lugs or SS fasteners shall bemeasured and paid separately

S&F factory made pressed steel frames of size 125 mm x 60 mm made of 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

M&L for preparation of newly surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete. (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)

All as per description of Srl item No. 12 here in before but thickness of shutter 35 mm.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handle fabricated adodized ISI marked, complete all as specified & directed.

S&F in repairs CP Brass shower rose 75 mm size with or without swival joint including fixing to steel pipe complete all as specified and directed.

S&F in repairs Stop valve/Angle valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.

S&F in repairs Stop valve/Angle valve (ISI Marked), long shank and cup, consealed, fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.

S&F in repairs 15mm bore long body bib tap, fancy type, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, oval shape, counter sunk, white, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, 32 mm dia complete all as specified and directed.

S&F in repairs 15 mm bore brass CP mixture for WHB mixing hot & cold water, screwed for iron pipe and fixed and all as specified and directed.

S&F in repairs 15 mm bore brass Cpwall mixture for mixing hot & cold water, screwed for iron pipe and fixed and all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed.

S&F in repair plastic water closet seat cover with hinging device closed pattern with flat bottom for pedestal pan complete all as specified and directed.

S&F in repairs PVC low level, push button, dual flush type flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F in repairs CP jet spray with 8 mm bore,1.5 m long rubber tube covered with spring type flexible tube fixed to EWC and angular stop cock complete all as specified and directed.

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 600 mm long complete all as specified and directed.

M&L for mild steel framed work as in doors, gates, other sections with gusset plate,rails, braces etc.complete, drilled for fixing steel sheeting or other coveringsetc. to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings (exclusive of steel sheeting or other coveringsrunning rails and guides) and hanging of Fe 290 Gde E-165, also fastening and fixing complete all as specified and directed.

S&F in repairs pre-laminated lead free factory made 18mm (+/- 0.7mm) thick 100% solid NFC (Natural Fiber Composit) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cum and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed. Note :- Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised 40mm width of flaps (when open), complete all as specified and directed.

S&F 100mm size hasp and staple, aluminium anodised including bolts to hinge plate and fixed with screws.

S&F ball catcher with proper magnetic effect fixed with shutters complete all as specified and directed.

S&F corrugated waste pipe 32 mm dia, suitable for WHB's/ sinks including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

S&F in repairs stainless steel grating dome type 110 mm dia complete all as specified and directed.

S&F in repairs stainless steel grating dome type 110 mm dia with waste hole complete all as specified and directed.

S&F in repairs, fancy type looking mirror of overall size 600mm x 450mm of bevelled edges, made out of selected quality glass of 6mm thick mounted on 6mm thick building board or commercial plywood & fixed to wooden plugs with Stainless Steel brackets & Stainless Steel fancy type screws & locking washers at 04 corners complete all as specified and directed.

Refixing of iron wire mesh door shutters area exc. 1.0 Sqm but n exc 2.0 sqm each in chowkhats of same opening including welding butt hinges and easining as per site requirement complete all as specified and directed.

S&F in repairs 100 mm CP waste coupling for sink complete all as specified and directed.

S&F in repairs GI tank nipple 15 mm bore complete all as specified and directed.

All as per description Srl item No. 41 here in before but 20 mm bore.

All as per description Srl item No. 41 here in before but 32 mm bore.

S&F in repairs GI union 15 mm bore complete all as specified and directed.

All as per description Srl item No. 44 here in before but 25 mm bore.

S&F in repairs GI reducer 15mm to 25 mm bore complete all as specified and directed.

All as per description Srl item No. 46 here in before but 20 mm to 25 mm bore.

S&F in repairs GI socket 15 mm bore complete all as specified and directed.

S&F in repairs GI nipple 15x50 mm bore complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank, 500 ltrs capacity, three layers, ISI marked, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old brocken water tank complete all as specified and as directed.