Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,24,500Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_691991_1Tender No
CWE BTD/TOKEN-24/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge.
136
-
-
... More
Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge.
192
-
-
... More
Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.
16.48
-
-
... More
Material and labour for Brick work with sub class ‘B’ burnt clay old size bricks, straight or curved on plan to any radius in half brick walls built in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
32
-
-
... More
Material and Labour Brick work with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.
8.8
-
-
... More
Material and Labour for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) but except bricks ( old serviceable bricks retrived from serial item no.6.00 of BoQ here-in-before shall be used for incorporation in work after cleaning ) complete all as specified and as directed by Engineer-in- charge. Note :- The rate of cleaning of old bricks is included in this item and nothing shall be paid extra on this account.
4
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed by Engineer-in-charge.
1975
-
-
... More
Material and Labour for Premium (1st) quality straight edge, plain square non skid tiles with mohs hardness greater than 7, Flexural Strength more than 35/N mm2, breaking strength greater than 1700N and density should be minimum 2.2 Grms/cc in 400mm x 400mm x 10mm thick/ area of each tile exceeding 0.12sqm but not exceeding 0.18 sqm as in floors etc. shade as approved by GE / combination of light & dark and sheen finish, laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction. completed all as specified and directed by engineer-in-charge.
400
-
-
... More
Material and Labour for providing and laying Premium (1st) quality straight edge, plain square non skid tiles with mohs hardness greater than 7, Flexural Strength more than 35/N mm2, breaking strength greater than 1700N and density should be minimum 2.2 Grms/cc in 400mm x 400mm x 10mm thick/ area of each tile exceeding 0.12sqm but not exceeding 0.18 sqm as in skirting surfaces shade as approved by GE / combination of light & dark and sheen finish, laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by Engineer-in-charge.
20
-
-
... More
Material and Labour for providing and laying Premium (1st quality) straight edge,Stain free, glooss finish, Square marbonite Double charged vitrified tiles size in 600mm x 600mm x 9mm to 10mm thick as in floors etc. shade as approved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
880
-
-
... More
Material and Labour for providing and laying Premium (1st quality) straight edge,Stain free, glooss finish, Square marbonite Double charge vitrified tiles size in 600mm x 600mm x 9mm to 10mm thick as in skirting surfaces shade as approved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
88
-
-
... More
Supply and Fixing glazed ceramic coloured tiles 9.5 mm to 10.5mm thick 600mm x 300mm size in verticle surface including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement etc including taking old existing tiles complete all as specified and as directed by Engineer-in-charge.
560
-
-
... More
Material and labour for Premium (1st quality), straight cut / joint free, scratch free, vitrified pavers / tiles, 10 mm thick of size 300mm x 300mm , in floors, set and jointed in neat cement slurry and pointed in expoxy grout to match the colour of tiles, laid over and including 15 mm thick Screed bed or bedding layer in Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge.
427
-
-
... More
Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.
116
-
-
... More
Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and as directed by Engineer-in- charge.
483.2
-
-
... More
Material and Labour for Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc. and the like of thickness not more than 250 mm by electric drilling machine and making good complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Supply and Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- Charge.
196
-
-
... More
Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with single rebate of Size 65mm x 100 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- Charge.
196
-
-
... More
Supply and Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat with double rebate of Size of Size 65mmx125 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- Charge.
280
-
-
... More
Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long Tower Bolt conforming to IS 15833-2009 with and including S&F of 02 Nos. (per Leaf) Stainless Steel 150mm long handle conforming to IS 208-2020 and 300mm Stainless Steel sliding door bolt 12mm dia with and including a minimum of 6 carriage bolts and nuts four on bolt plate and two on stapple plate and fixed conforming to IS 15834-2008 complete all as specified and as directed by Engineer -in-charge.
226.98
-
-
... More
Supply & Fixing Factory Made 30mm thick Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be panelled with and including mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked) conforming to IS 15833-2009, 2 Nos stainless steel handles, 125 mm long, (ISI marked) conforming to IS 208-2020 , 01 No. of helical door spring of 300 mm length complete all as specified and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company 2. The rate of 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainless steel handles, 125 mm long, (ISI marked) , 01no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item.3 The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account.
70.2
-
-
... More
Material and labour Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for windows , ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, Aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .
Note :- (i) Weight of aluminium sections , aluminium cleat angles, Aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.
(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws is included in this item and nothing shall be paid extra on this account. (iii)During considering the weighing of aluminium sections , aluminium cleat angle, Aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. only the weight of the aluminium sections , aluminium cleat angles, Aluminium snap beading shall be considered and measurment and payment shall be made accourdingly.
(iv) Glazing /wire mesh /Paneling shall be measured and paid seperately in appropriate items of Schedule'A' BoQ.
(v) During the weighing of aluminium sections , aluminium cleat angle, Aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account.
(vi) Powder coated butt hinges, aluminium handles & aluminium peg stays shall be measured and paid seperately under respective itmes of Schedule'A' BoQ.
964
-
-
... More
Supply & fixing for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge.
2176
-
-
... More
Material and Labour in repairs 2nd Hard Wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, sectional exceeding 3.00 Sqcm and not exceeding 6.00 sqcm complete all as specified and as directed by Engineer-in- charge.
625
-
-
... More
Material and Labour in repairs 2nd Hard Wood , wrought, as in bull nosed, splayed, chamfered or rounded on one edge or face, sectional area exceeding 3.00 Sqcm and not exceeding 6.00 sqcm complete all as specified and as directed by Engineer-in- charge.
500
-
-
... More
Supply & fixing in replacement stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
60
-
-
... More
Supply and Fixing size of spring hinge 100 mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Material and Labour for Welding in repairs not exceeding 6mm thickness of metal to be welded and not exceeding 2.50 cm in length complete all as specified and as directed by Engineer-in- charge.
160
-
-
... More
Supply & fixing Stainless Steel continuous (piano) hinges 30mm width of flap, mild steel bright finish or electrogalvanised complete all as specified and directed by Engineer-in-charge.
326.4
-
-
... More
Supply and Fixing Ball catches with 8mm dia steel ball, and brass body and striking
plate including letting in and fixed complete all as specified and directed by Engineer-in-charge.
260
-
-
... More
Supply & fixing floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and as directed by Engineer-in- charge.
136
-
-
... More
Supply & fixing 4.8 mm thick, sheet glass ordinary quality not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
88
-
-
... More
Supply & fixing 4.8 mm thick, sheet glass ordinary quality exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
20
-
-
... More
Supply & fixing 4.00 mm thick, figured glass, pin head type not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Supply and fixing stainless steel curtain rod 25mm dia, wall thickness of pipe not less than 16 guage and grade SS 304, including brackets and pair of decorated end knobs (finials), stop roller etc. as per site requirement, fixed to wall with fixing accessories, including taking down old existing curtain rods any type or condition complete all as specified and as directed by Engineer-in-Charge.
368
-
-
... More
Material and Labour for preparation of steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chromate primer complete all as specified and as directed by Engineer-in-charge.
176
-
-
... More
Supply and fixing 32mm dia, waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and as directed by Engineer-in-charge.
32
-
-
... More
Taking up or down galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
300.64
-
-
... More
Taking up or down galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
246.8
-
-
... More
Taking up or down galvanised steel water tubing (GI pipe) 25mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
144
-
-
... More
Supply and Fixing 16 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
300.64
-
-
... More
Supply and Fixing 20 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
246.8
-
-
... More
Supply and Fixing 25 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
144
-
-
... More
Supply & fixing in replacement Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply & fixing in replacement Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 25mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply & fixing in Repair MS Grating doom 150 mm dia circular / 150 mm dia Square size fixed in over Roof complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply and Fixing in replacement Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.
16
-
-
... More
Supply & fixing in replacement chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
32
-
-
... More
Supply and fixing in repair angular stop valve/cock, cast copper alloy chromium plated, with flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15mm bore pipe, in repair complete all as specified and directed by Engineer-in-charge.
64
-
-
... More
Supply & fixing in replacement , 15mm bore Bib tap cast copper alloy, chromium plated, fancy type long body with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
48
-
-
... More
Supply & fixing in repair 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
64
-
-
... More
Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.
32
-
-
... More
Supply and Fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) an dto flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
Supply and Fixing in repairs vitreous china wash basin, white, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper including brackets complete all as specified and as directed by Engineer-in- charge.
32
-
-
... More
Supply & fixing in replacement Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing in repairs health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
Supply and fixing in replacement sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and as directed by Engineer-in-charge.
8
-
-
... More
Supply and fixing 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame alround made of PVC channel, complete all as specified and directed by Engineer-in-Charge.
32
-
-
... More
Supply and fixing in repairs Stainless steel plate rack of size 900mm x 600mm x 250mm and thickness of Stainless Steel strip of 1mm fixed on wall etc. complete all as specified and as directed by Engineer-in-charge.
8
-
-
... More
Supply and fixing in repairs Brass chromium plated Tubular towel rail, 20mm dia , D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in- charge.
32
-
-
... More
Supply and Fixing brass chromium plated towel rack 600mm long without lower hangers but with 3 hooks, Stainless steel complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing steel chromium plated towel ring complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard & railing 60 cm long, complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
Supply & fixing in replacement Chromium Plated, soap tray size not less than 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge
24
-
-
... More
Supply and Fixing PTMT mirror cabinet of size 380mm x 450mm best quality confirming ot sample kept in GE's office complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
Supply and fixing in replacement 15mm bore Stop valves,fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfor iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
40
-
-
... More
Supply and fixed in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, fancy type, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed by Engineer-in-charge.
8
-
-
... More
Supply & fixing in repairs rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- ball valve and gate valve shall be measured & paid separately under appropriate items of Schedule 'A' BoQ.)
8
-
-
... More
Supply & fixing in repairs rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- ball valve and gate valve shall be measured & paid separately under appropriate items of Schedule 'A' BoQ.)
8
-
-
... More
Supply and Fixing Chromium Plated grating (with or without waste hole), 125mm size, fixed on floor/nahani traps etc complete all as specified and directed by Engineer-in-charge.
64
-
-
... More
Supply and Fixing Chromium Plated brass fancy type Corner glass shelf (25cm/30cm) with CP brass bracket & railing etc; complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and fixing in replacement Toilet paper holder of Brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engineer-in-Charge.
24
-
-
... More
Supply and Fixing peg set/coat hooks (set of 4/5) of Stainless steel, complete all as specified and as directed by Engineer-in- charge.
32
-
-
... More
Supply and Fixing 15mm bore, brass Chromium Plated wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing in repair 15mm bore, brass Chromium Plated central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing 15mm bore Brass Chromium Plated sink mixer for mixing hot & cold water screwed down for iron pipe and fixed regular swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Material and labour 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and as directed by Engineer-in- charge.
480
-
-
... More
Material and labour for 15mm thick Rendering in Cement mortar 1:6 on fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
632
-
-
... More
Material and labour for Rendering 15mm thick in cement mortar in 1:4 on other than fare face of brick work or concrete surfaces even and smooth without using extra cement with using liquid water proofing compound @ 200 ml per bag complete all as specified and as directed by Engineer-in-charge.Note:- Liquid water proofing comound shall be measured and paid seperately as supply only in appropriate item of schedule 'A' BoQ.
1680
-
-
... More
Material and labour for rendering 5mm thick in Cement Mortar 1:3 on concrete surfaces such as ceiling or soffits of chhajas etc; finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
240
-
-
... More
Material and labour for rendering 15mm thick in Cement Mortar 1:3 with liquid water proofing compound @ 200 ml per bag on concrete/brick surfaces such as sunken floor, vertical surfaces of sunken slab etc; complete all as specified and as directed by Engineer-in- charge. Note:- Liquid water proofing comound shall be measured and paid seperately as supply only in appropriate item of schedule 'A' BoQ.
210
-
-
... More
Supply and Fixing 110 mm bore of pipe PVC (SWR) type B pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old unservicable PVC rainwater pipes ( of any size and pattern), including all fittings, compete all as specified and as directed by Engineer - in-charge.
320
-
-
... More
Supply and Fixing 110mm bore, PVC SWR Type-B Bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and as directed by Engineer-in-charge.
120
-
-
... More
Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement include joints filled with sealing compund complete all as specified and as directed by Engineer-in-Charge
472
-
-
... More
Material and labour for RCC Nominal Mix (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, fins, facia and spiral staircase etc and the like, complete all as specified and as directed by Engineer-in- charge. Notes: Reinforcement shall be measured and paid seperately under appropriate item of Schedule 'A' BoQ.
4
-
-
... More
Material and labour for Mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips directed by Engineer-in-charge.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
640
-
-
... More
Material and labour for Formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
64
-
-
... More
Supply and Fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm x 440mm x 260 mm white with integral foot rests including connection to trap and to flushing pipe, antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-charge.
8
-
-
... More
Supply and Fixing 75 mm bore of pipe PVC (SWR) type B pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 of stays to wall at a distance of 100-120mm away from walls including Taking down old 75mm bore Cast Iron unservicable rainwater pipes ( of any size and pattern), including all fittings, complete all as specified and as directed by Engineer-in- charge.compete all as specified and as directed by Engineer - in-charge.
184
-
-
... More
Supply and Fixing 110 mm bore of pipe PVC (SWR) type B pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 of stays to wall at a distance of 100-120mm away from walls including Taking down old 100mm bore Cast Iron unservicable rainwater pipes ( of any size and pattern), including all fittings, complete all as specified and as directed by Engineer-in- charge.compete all as specified and as directed by Engineer - in-charge.
124
-
-
... More
Supply and Fixing 75mm bore, PVC SWR Type-B Bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply and Fixing 75mm bore, PVC SWR Type-B junction single (Single T) equal or unequal with oval access doors complete all as specified and and as directed by Engineer - in-charge.
16
-
-
... More
Supply and Fixing 75mm bore PVC (SWR) Type-B branch piece, single (single Y) equal or unequal with oval access doors complete all as specified and as directed by Engineer - in-charge.
16
-
-
... More
Supply and Fixing 110mm bore, PVC SWR Type-B junction single (Single T) equal or unequal with oval access doors complete all as specified and and as directed by Engineer - in-charge.
12
-
-
... More
Supply and Fixing 110mm bore PVC (SWR) Type-B branch piece, single (single Y) equal or unequal with oval access doors complete all as specified and as directed by Engineer - in-charge.
12
-
-
... More
Supply and Fixing in repair 75mm dia PVC SWR Type-B, Vent cowl ISI marked, complete all as specified and as directed by Engineer-in-Charge.
16
-
-
... More
Supply and Fixing in repair 110mm dia PVC SWR Type-B, Vent cowl ISI marked, complete all as specified and as directed by Engineer-in-Charge.
16
-
-
... More
Supply and Fixing in repair 75mm dia PVC SWR Type-B, floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1, using 20mm graded stone aggregates complete complete all as specified and as directed by Engineer-in-charge.
225
-
-
... More
Material and Labour for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge.
240
-
-
... More
Material and Labour for complete removal of existing treatment of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
960
-
-
... More
Material and Labour for preparing existing treated old surfaces of wall including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
450
-
-
... More
Material and Labour for for preparing new plastered surfaces of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge..
100
-
-
... More
Material and labour for 100 mm thick cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
220
-
-
... More
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade colour and pattern as approved by GE with grey cement and pigment complete all as specified and as directed by the Engineer-in-Charge.
220
-
-
... More
Dismantling of interlocking tiles of any type and description and refixing the same after cleaning/washing complete all as specified and as directed by Engineer-in-Charge.
80
-
-
... More
Material and labour for 25mm thick Sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed by the Engineer-in-Charge.Note: Sand shall be approved by GE before incorporation in the work.
7.5
-
-
... More
Material and Labour for Complete removal of existing treatment on old surfaces of internal walls with mechanical means/grinder with and including applying acrylic wall care putty on internal surfaces of wall (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc with and including applying 02 coats of interior emulsion paint (light shade as approved by GE ) @ 10 sq.m/litre/2 coats by using roller/brush to internal wall surfaces over with and including one coat of interior emulsion primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer makes as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and as directed by Engineer-in-charge . Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
1200
-
-
... More
Material and Labour of new plastered surfaces of internal walls with mechanical means/grinder with and including applying acrylic wall care putty on internal surfaces of walls (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc with and including applying 02 coats of interior emulsion paint (light shade as approved by GE ) @ 10 sq.m/litre/2 coats by using roller/brush to internal wall surfaces over with and including one coat of interior emulsion primer @ 10 sq.m / litre /1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer complete all as specified and as directed by Engineer-in-charge makes as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after . Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
632
-
-
... More
Material and Labour for Complete removal of existing treatment on old external surfaces of walls with mechanical means/grinder with and including applying acrylic wall care putty on external surfaces of walls (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc with and including applying 02 coats of exterior emulsion paint (light shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m / litre /2 coats by using roller to external walls surfaces over & including one coat of exterior emulsion primer @ 11 sq.m / litre /1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer makes as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and as directed by Engineer-in-charge . Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
2200
-
-
... More
Material and labour for preparation of newly plastered surfaces of walls with mechanical means/grinder with and including applying acrylic wall care putty on external surfaces of walls (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc with and including applying 02 coats of exterior emulsion paint (light shade as approved by GE) with highlighter of any approved shade, @ 10 sq.m/litre/2 coats by using roller to external surfaces of walls over & including one coat of exterior emulsion primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer makes as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and as directed by Engineer-in-charge . Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
1680
-
-
... More
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint (1st quality) of approved tint / colour to achieve glossing finish complete as specified and as directed by Engineer-in-charge.
64
-
-
... More
Material and labour rubber gasket 50mm wide fixed with screws or nails etc at bottom of door shutter of any description complete all as specified and as directed by Engineer-in-Charge.
40
-
-
... More
Material and labour for cement concrete (1:5:10), type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors etc complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply and Fixing in repairs magic eye for flush/panelled door shutter etc complete all as specified and as directed by Engineer-in-Charge.
8
-
-
... More
Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc
2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc
3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture.
4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm.
5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat.
6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm.
7. Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry).
240
-
-
... More
Dismantling of brick tiles or terracing tiles single layer on roof , disposal of retrieved material and stacking properly as directed by Engineer-in- charge.
660
-
-
... More
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge.
66
-
-
... More
Material and labour for cement slurry @ 1.2 kg /sqm spreading with bristle brush with and including rendering 15 mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note:- Liquid water proofing comound shall be measured and paid seperately as supply only in appropriate item of schedule 'A' BoQ.
660
-
-
... More
Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:
(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means
(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.
(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.
(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.
(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.
(f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL
Tensile Strength 1.5 MPa ASTM D412
Elongation at Break 200% ASTM D412
Adhesion in Peel 1.5 MPa (on concrete substrate) EN 1542
Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305
Permeability to Water Vapour Passes IS 2645
Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96
Water Absorption 10% ( by Mass) ASTM D570
Microbiological Resistance No Algae & Fungal Growth ASTM D5590
Solar Reflectance Index 102 ASTM E1980.
Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key.
Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE.
660
-
-
... More
Material and Labour for 40mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.
660
-
-
... More
Material and Labour for Making benching with PCC 1:2:4 type- B0, using 12.5mm graded stone aggregates using with Liquid Water Proof compound as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note : Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.
2.64
-
-
... More
Supply only liquid water proofing compound ISI Marked. complete all as specified and as directed by Engineer-in-Charge.
49
-
-
... More
Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by the Engineer-in-Charge.
260
-
-
... More
Material and labour for cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregates as in bands, bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as specified and as directed by Engineer-in-charge.
6.5
-
-
... More
Taking down cement plaster including swolen/loose concrete from RCC surfaces of any description (like columns, beams, chajjas, parapets etc.) upto 50 mm depth, scrubbing down with water etc, and applying neat cement slurry @ 1.20 kg/Sq. m of cement and applying RCC/PCC 1:2:4 type B-0 12.5mm graded stone aggregates as directed including necessary form work if any with rough finished surface of concrete, complete all as specified and as directed by Engineer-in- charge. NOTE : Reinforcement & covering plastering will be measured and paid for separately under appropriate items of BoQ.
80
-
-
... More
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc Laid dry or bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
8.4
-
-
... More
Material & Labour for Pre-polished kota stone 18-20mm thick as in flooring, cills and stair case over 15 mm thick cement screed base in CM 1:6 laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rounding of edges complete complete all as specified and as directed by Engineer-in-charge.
Note : Full piece of kota stone to be used in window cills, tread and riser.
68
-
-
... More
Material & Labour for Pre-polished kota stone 18-20mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick cement plaster in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Material and Labour for precast cement concrete louvers and jallies 35mm thick , 1:2:4 Type B-0 using12.5 mm graded stone aggregates, set in cement mortar 1:4 (measured solid) including all mouldings complete all as specified and as directed by Engineer-in- charge.
50
-
-
... More
Material and Labour for Cutting chases in brick wall , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engineer-in- charge.
176
-
-
... More
Material and Labour for Cutting holes into or through brick walls built in cement mortar and making good in CM 1:3 or Cement concrete 1 : 2 : 4 , type B1 , superficial area not exceeding 150 Sq cm complete all as specified and as directed by Engineer-in- charge.
0.3
-
-
... More
Supply & fixing Mild steel screw bolts (machine made) 5 to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and not exceeding 10cm long complete all as specified and as directed by Engineer-in-charge.
5
-
-
... More
Supply and Fixing GI tubing medium grade ISI marked with all new fittings and fixed to walls & ceiling or laid in floors, bore of pipe 40 mm complete all as specified and as directed by Engineer-in- charge.
14.4
-
-
... More
Material and Labour Cutting openings, though brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing and fixing complete all as specified and as directed by Engineer-in-Charge.
2
-
-
... More
Material and Labour Forming jambs, etc. to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
68
-
-
... More
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge.
237.6
-
-
... More
Suppy and Fixing Plywood 6mm thick grade BWR, type BB fixed with screws on walls complete all as specified and as directed by Engineer-in-Charge.
8
-
-
... More
Suppy and Fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and fixing in postion on back side of cup boards and like complete all as specified and as directed by Engineer-in-Charge.
60
-
-
... More
Suppy and Fixing for Fe 410 -W (Gde-E - 250) qualtiy- A mild steel work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer-in-Charge.
80
-
-
... More
Supply and Fixing of 18mm thick HDHMR board UV coating, exterior grade, includig acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and as directed by Engineer-in-Charge.
192
-
-
... More
Supply and Fixing of 18mm thick UV coating, MDF board exterior grade, Both side laminated with 9 layer melamine sheet of any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards shelfs complete all as specified and as directed by Engineer-in-Charge.
168
-
-
... More
Supply and Fixing in repairs of partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and as directed by Engineer-in-Charge.
736
-
-
... More
Supply and Fixing in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape complete all as specified and as directed by Engineer-in-Charge.
272
-
-
... More
Supply and Fixing in repairs of stainless steel modular thali-plate basket SS 304, size of 520mm x 485mm x 200mm, heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg complete all as specified and as directed by Engineer-in-Charge.
16
-
-
... More
Supply and Fixing in repairs of stainless steel grain trolley SS 304 having size of 525mm x 485mm x 350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg complete all as specified and as directed by Engineer-in-Charge.
8
-
-
... More
Supply and Fixing in repairs of stainless steel Bloo basket SS 304 for modular kitchen basket utensils drawer wired set of 6 (size 530mm x 500mm) with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg complete all as specified and as directed by Engineer-in-Charge.
8
-
-
... More
Material and Labour for providing and injecting along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed by Engineer-in-Charge.
640
-
-
... More
Material & Labour for ATT At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed by the Engineer-in-Charge
800
-
-
... More
Material and Labour for ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floors complete all as specified and as directed by Engineer-in-Charge.
600
-
-
... More
Material and Labour for Writing letters or figures (Block, Roman, italic or Inian) n exc 30 CM complete all as specified and as directed by Engineer-in-Charge.
16
-
-
... More
Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 16 Sqmm 4 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
200
-
-
... More
Supply and fixing GI tubing, light grade, 40 mm bore complete with all fitting for cable protection including fitting complete with flat iron clamps of size 25 mm x 4 mm, nuts, bolts & washers complete fixed to poles/along wall /floor/under road/across the drain or nallah/laid in trench complete all as specified and directed by Engineer-in-charge.
60
-
-
... More
Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth for foundation etc or for shafts , wells, cesspits, manholes , septic tank, for laying of cables , laying of pipes not exceeding 10 Sqm on plan and not exc 1.5 meter depth and getting out in soft/loose soil etc complete all as specified and as directed by Engineer-in- charge.
54
-
-
... More
Returning filling in any type of soil, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm in each layer, complete all as specified and as directed by Engineer-in- charge.
32.22
-
-
... More
Removal of surplus excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and as directed.
18.19
-
-
... More
Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified. (Note:- Punned thickness shall be considered for payment purpose)
16.2
-
-
... More
Supply and laying un-reinforced precast concrete cable cover, class lV , type-I, flat size 250 mm x 150 mm x 40 mm for cable protection, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-charge.
1334
-
-
... More
Material and labour for making the hole under road and hard standing not less than 1.00 metre depth for laying and inserting pipe upto 100 mm dia in any length by mechanical drill system or Auger system and making the surface good as per existing surface complete all as specified and directed by Engineer-in-Charge. Note: GI tubing shall be measured and paid separately under appropriate item of Schedule'A' BoQ..
20
-
-
... More
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no. 163.00 to 168.00 of BoQ.
592
-
-
... More
Material and Labour for point wiring for modular type fittings using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 2.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through existing PVC conduit on wall / ceiling surface with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories for one light/fan/call bell/exhaust fan point controlled by one 5/6 Amps switch and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge.
Note for serial item no.163.00 to 168.00 : The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ. (ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account.
384
-
-
... More
All as item No 163.00 here -in- before but for one socket outlet 5 pin 5/6 Amps 250 volts flush type on same board complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
All as item No 163.00 here -in -before but for one socket outlet 5 pin 5/6 Amps 250 volts on Independent board complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
All as item No 163.00 here -in -before but for one socket outlet 6 pin, 6/16 Amps 2 in 1 complete all as specified and as directed by Engineer-in- charge.
88
-
-
... More
Material and Labour for point wiring for modular type fittings using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through existing PVC conduit on wall / ceiling surface with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing for one bell /buzzer point, etc. including blanking plates & all other fixing accessories for one light/fan/call bell/exhaust fan point controlled by one 5/6 Amps switch and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge.
Note for serial item no.185.00 to 186.00 : The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ. (ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account.
16
-
-
... More
All as item No 167.00 here -in- before but for One light point controlled by Two Two way switch completed all as specified and directed by Engineer-in-chrage.
8
-
-
... More
Supply & Fixing Modular switch one way 6A, 1 module, complete all as specified and as directed by Engineer-in-charge.
480
-
-
... More
Supply and fixing Modular Switch one way 16 Amp 240 Volt, AC ,1 Module , ISI Marked complete all as specified and directed by Engineer-in-charge.
88
-
-
... More
Supply & Fixing modular type Switch single pole, two way, 6 Amp, one module, complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply and Fixing Modular Bell push switch 6A 1 module ISI Marked complete all as specified and as directed by Engineer-in- charge.
16
-
-
... More
Supply and fixing Modular Socket Outlet , Multipurpose,3 Pin, 6 Amp , 2 Module , ISI Marked complete all as specified and directed by Engineer-in-charge.
96
-
-
... More
Supply and fixing Modular Socket outlet , multipurpose, 3 Pin, 16 Amp , 2 Module , ISI Marked complete all as specified and directed by Engineer-in-charge.
88
-
-
... More
Supply and fixing Modular telephone socket one module complete all as specified and directed by Engineer-in-charge.
16
-
-
... More
Supply and fixing White cover plate with frame 1 module complete all as specified and directed by Engineer-in-charge.
16
-
-
... More
Supply and fixing Metal flush box 1/2 module complete all as specified and directed by Engineer-in-charge.
16
-
-
... More
Supply and fixing Call Bell, Ding Dong AC. 230 volts,single pole, complete all as specified and directed by Engineer-in-charge.
8
-
-
... More
Supply and Fixing Call Bell Multi Music type ISI mark complete all as specified and as directed by Engineer-in-charge.
8
-
-
... More
Supply and Fixing ceiling rose surface bakelite 65 mm x 50 mm with three terminal complete all as specified and as directed by Engineer-in- charge.
304
-
-
... More
Supply and Fixing lamp holder PVC/ polycarbonate type with back plate suitable for batten fitting with LED 5W Lamp, 6500K, base B-22 efficacy not less than 90 lumen/wattcomplete all as specified and as directed by Engineer-in- charge.
80
-
-
... More
Supply and Fixing wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 1.2 m 6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver ,complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
144
-
-
... More
Supply and Fixing wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 0.60 m, 10watt, T-5, 6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver ,complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED Lamp (base B-22) complete with PC diffusor & including one 9W LED lamp (base B-22), 6500K, not less than 100 lumen/watt efficacy ,complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
Supply and fixing Ceiling type round shape 6 watt 220 volts ACsurface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing LED Bulkhead luminaries 9/10 Watt including LED light driver holder and diffuser, ploycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
16
-
-
... More
Supply and fixing LED Street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor 0.95,100 lumen/watt, CCT min 5700K complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Material and Labour for Sub main wiring with two single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.
560
-
-
... More
Material and Labour for Sub main wiring with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length.
8
-
-
... More
Material and Labour for Sub main wiring with four single core of size 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 32 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Five single core 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 32 mm dia shall be measured as one length.
96
-
-
... More
Supply and fixing Rigid non-metallic PVC conduit 20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed by Engineer-in-charge.
648
-
-
... More
Supply and Fixing in repairs Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-43 protection, flush mounted for metal door, powder coated DB TPN 4 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
8
-
-
... More
Supply and Fixing in repairs Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,IP-43 protection, double door, powder coated DB SPN 8 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
8
-
-
... More
Supplying and fixing MCB SP suitable for 230 volts AC supply 6 to 32 Amps, SP rupturing capacity not less than 10KA, C Curve complete all as specified and directed by Engineer-in-charge.
176
-
-
... More
Supply and fixing MCB ‘C’ curve suitable for 230 volts AC supply, 32 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-charge
8
-
-
... More
Supply and Fixing in repair RCBO for EARTH LEAKAGE, OVERLOAD & SHORT - CIRCUIT PROTECTION 230V 32A AC type 10KA Four pole 30mA ISI marked complete all as specified and directed by Engineer-in-charge.
8
-
-
... More
Supply and Fixing in repair sheet metal enclosure with socket and plug top and MCB single pole enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp 230 Volt complete all as specified and as directed by Engineer-in- charge.
16
-
-
... More
Supply , installation, commissioning and testing Wall Mounting indoor type LT Panel board made of Polycarbonate ASTA CPRI approved OEM made main LT Panel embedded with PU gasket with conical top with thimble and cable entry boxes with cable glands including with pedestal/frame grouthed in PCc 1:2:4 type B-1 using 20m graded stone aggregates. The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES including MCCBs and indicator lamps which shall be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel shall be IP 65, IK 08, anti-acid & anti corrosive. Panel should covered from all sides with front and back lockable door and hinges complete with copper bus bar with heat shrinkable PVC sleeve, DMC insulators, TPN, three phase, 04 wire (In separate chamber), Internal Power & control wiring with suitable size PVC insulated FRLS single core multistranded copper wire cable and including panel painting The manufacturer of panel shall submit a copy of ASTA CPRI TEST REPORT IN POLYCARBONATE only also share panel assembled by OEM only. TYPE TEST & ROUTINE TEST REPORT to be submitted. The ASTA CPRI report shall have mention of following tests performed and passed out satisfactorily - Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The panel shall pass glow wire test 960 degrees Centigrade in accordance with 60695-2-11 [flame retardant and self-extinguishing] with and including pedestal/ frame grouted in PCC (1:2:4) type B-1 20mm graded stone aggregated, thimble and cable entry boxes with cable glands comprising of following accessories complete all as specified and directed by Engineer-in-charge :- INCOMER:
(i) MCCB 63 Amp, 4 pole 16 KA 415V Fixed Thermal & Magnetic Released - 01 No.
(ii) Digital Volt meter 0-500 V - 01 No. (iii) Digital Amp meter 0-200 A- 01 No.
(iv) Set of three LED RYB type indicating lamps - 1 set of three
(v) Copper Bus Bar 200Amp TPN OUTGOINGS: (i) MCB 63Amp, TPN C -Curve - 02 Nos.(For DUs) (ii) MCB 10 Amp DP B -Curve - 01 No. (For staircase lighting) (iii) Provisional arrangement for energy meters eith transparent acrylic sheet with separate locking arrangements-02 Nos. Note: The payment of this item shall be made to contractor only after submit the manufacturer's TEST REPORT of tests as described here-in-before . if contractor fails to submitte no payment shall be made .
4
-
-
... More
Material and Labour for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6.00mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to and including galvanized iron strip 25mm x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part - I and earth lead protected by galvanized pipe light grade 40 mm bore (ISI marked) up to 7.5 mtrs from earth electrode , including, earthing plate shall be surrounded by alternative layers 15cm thick of charcoal and common all around bottom and top , necessary earth work and excavation in soft/loose soil , form work, GI medium grade 20mm bore watering pipe (ISI Marked) with funnel and wire mesh, 40mm thick chamber made with PCC 1:2:4 type B1 ,cover slab made with RCC 1:2:4 type B1 Design mix ,edges covered with and including 40mm x 40mm x 6 mm angle iron frame duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer with and including 8mm dia TMT bars at 75mm c/c both ways with MS Hook of 12mm dia MS bars, etc , all as specified and directed by Engineer-In-charge. Note : (i)Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed.
(ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. Note:- (i) Earth continuity of galvanized iron strip 25mm x 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
8
-
-
... More
Supply & Fixing Ceiling fan of 1200mm sweep complete with blades, down rods, including electronic regulator (modular type, 120w, 2 module) and accessories, 230 Volts, single phase, 50 Hz, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of suitable size from ceiling rose / connector, including extra GI / MS pipe down rod, as per site requirement , with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed by Engineer-in-Charge.
56
-
-
... More
Supply & Fixing Exhaust fan (Heavy duty) steel body, AC, Single phase 230 volts,50HZ,900 RPM ,300 mm sweep BEE, 5 star rated a with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc. mounted in suitable opening arrangmement in wall and electric connection with and including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC Conduit and hanging on wall with 04 Nos. steel fastners 10mm dia 100mm long with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed by Engineer-in- charge.
8
-
-
... More
SSupply and Fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
Supply and Fixing water heater (Geyser) Auto restrat and safety measures type electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation complete complete all as specified & directed by Engineer-in- Charge.
16
-
-
... More
Taking down carefully Ceiling fan & Exhaust fan, sealing cable end , dismantling blades and removing and deposting the same in E/M store yard of GE South Bathinda complete all as specified and directed by Engr-in- Charge.
88
-
-
... More
Taking down carefully electric water heater storage type (Geyser) and and deposting the same in E/M store yard of GE South Bathinda complete all as specified and directed by Engr-in- Charge.
16
-
-
... More
Dismantaling and taking down of existing energy meter and deposit in the store yard of AGE E/M of GE (S) Bathinda & refixing the same after collecting from store yard of AGE E/M of GE (S) Bathinda after complete the repair work of the building and connecting up sepecified complete all as specified and directed by Engr-in- Charge.
4
-
-
... More
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%