Military Engineer Services Tender

Taking up and down old/unservicable GI tubing with fittings of following size complete all as specified and directed. (Earth work will be measured and paid under respective items of sch 'A').

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

S&F with all fitting and fixed complete to walls and ceilings or laid in floors or roof of steel water tubing galvanised medium grade of sizes

20 mm dia bore

25 mm dia bore

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

Taking up and down old/unservicable CI/DI water tubing with fittings of following size complete all as specified and directed. (Earth work will be measured and paid under respective items of sch 'A').

150 mm dia bore

100 mm dia bore

Supply, laying and testing of ductile iron pipe (with jointing material) class K-7 of 150mm dia size Spigot and socket end with tyton joints in trenches/ on pedestals etc complete mortar lining (CML) and outside black bitumen coating etc, complete all as specifide and directed. Note: ( Earth work includes excavation, returning & filling and removal, DI fittings will be measured and paid separate where required).

All as per srl No.8 above item but 100 mm dia

S&F in replacement for Cl sluice valve, non-rising type conforming to IS-14846, sutiable for 150 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

All as per srl No.10 above but 100 mm dia

All as per srl No.10 above but of size 80 mm dia

S&F inreplacement of Cl swing check NRV conforming to IS-5312, sutiable for 150 mm bore pipe consisting Cast iron Body, door as per IS 210, body ring as per IS 318, natural rubber door face, hinge pin SS ASTM A276 type 410, fasteners as per IS 1367, Natural rubber gasket, etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut, bolts and washers etc complete all as specified and directed.

All as per srl No.13 above but 100 mm dia

Dismentling old defective water meters and M & L for CI water meter Woltman type Magnetic Drive Class-B Flanged end of size 150 mm

Dismentling old defective water meters and M & L for CI water meter Woltman type Magnetic Drive Class-B Flanged end of size 100 mm

S&F Y type Strainer (including taking down old unserviceable Strainer Y type) confirming to IS of Dia 150 mm size complete all as specified & directed.

S&F Y type Strainer (including taking down old unserviceable Strainer Y type) confirming to IS of Dia 100 mm size complete all as specified & directed.

S&F in replacement of gun metal gate valve with iron wheel head screwed both ends for iron pipe of size including dismantling old one.

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

M&L for dismantling of old U/S valve pit and making new valve pit of size 120x120x105cm ( internal dimensions of the chamber) all as shown on drawing No CEPZ/C-TD/006/13 Sheet 1/1 including removing the debris at a distance not exceeding 50 Mtr. Note: New valve pit shall be made using 30% old bricks obtained by dismantling of existing U/S valve pit.

All as per srl No.20 above but of size 105x105x105 cm

All as per srl No.20 above but of size 90x90x105cm

All as per srl No.20 above but of size 60x60x60cm

S&F in replacement of Autometic Star Delta Submersible pump starter with short circuit protection for 415 V ,AC supply, Rated power 30 HP Relay ,range 28-40 Amp capacity complete with control wiring all as directed.

S&F in replacement of Autometic Star Delta Submersible pump starter with short circuit protection for 415 V ,AC supply, Rated power 50 HP, Relay ,range 52-75 Amp capacity complete with control wiring all as directed.

S&F of Submersible pump Set 40 HP, electric driven 415 V, TP suitable for 200/250 mm dia bore well ( Casing pipe size 200/250 mm), 1135 LPM, 80 meter head , complete as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified Notes:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels etc. 4. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

M&L for earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to GI strips 32 x 6 mm by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 5 of SSR Part-I all as specified and directed. Notes:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels etc. 4. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

M&L for cutting existing GI/CI Main pipe line of any size making new connection for GI pipe including short pieces , inserting tees, bends ,sockets, union etc with existing water line all as specified by Engr-in-charges.

Supply installing, testing and commissioning of LT feeder piller box factory made indoor type, fabricated out of 3.15 mm thick CRCA sheet with angle iron base frame made of 65 x65 x 6mm, 45 cm height, dust and vermine proof, suitable for voltage 415 separate hinge door for each compartment for incoming and outgoing MCCB etc with locking arrangement, with back door openable screwed, legs grouted in PCC including painting with two coats of epoxy powder paint over a coat ofd primer after alkaline degreasing, descaling in dilute sulphuric acid or any other acid and phosphate and with aluminium busbar (TPN), including provn of following :- Note : The panel shall be as per CPRI certificate Note : Rates nclusive of PCC complete i) Aluminium Bus bar 320-A- mounted on porcelain insulator - 01 Set ( Set of 4 Nos) with PVC sleeve insulation ii) MCCB 4 Pole , 250 Amp, 415 V, 36 KA (Adjustable type,Thermal magnetic release) adjustable overload setting 80% to100%- 01 Nos (incommer) iii) MCCB 4 Pole , 160 Amp, 415 V, 25 KA (Thermal magnetic release) adjustable overload setting 80% to100%- 02 Nos iv) MCCB 4 Pole , 125 Amp, 415 V, 25 KA (Thermal magnetic release) adjustable overload setting 80% to100%- 01 Nos (v) MCB TP 63 A -03 Nos vi) Digital Voltmeter of size 96x96mm rating 0-500 volts with selector switch - 01 Nos vii) Digital Amp meter of size 96x96mm rating 0-500 Amp with CT's & slection switch - 01 Nos viii) RYB LED indicator- One set ix) on off switch with indicator -03 Set x) onload change over 250 Amp - 01 No

S&F in replacement submersible cable 16 Sqmm copper 3 core all as specified and directed by Engr-in-charge.

Ductile Iron fittings such as bends (any type, radius & angle), Tapers any type, (straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, 'Y' Junction, double branch, cross (all socket or socket & spigot) collars, caps & plugs etc as per site requirement confirming to IS-9523 suitable for spigot and socket end tyton joints DI pressure pipe including joints and jointing material, etc complete all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.