Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 77,500Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671252_1Bid Award Id
ViewTender No
TOKEN NO GE ABH-32/24-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point as specified and dircted by Engr-in-charge.
15.86
-
-
Retrning, filling in, including spreading, levelling, watering & well ramming in layers n.exc 25 cm in soft/loose soil as specified and dircted by Engr-in-charge.
23.16
-
-
M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40mm graded stone aggregate as specified and dircted by Engr-in-charge.
2.52
-
-
M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6mtr mean radius bult in CM 1:6 all as specified and firected by ngineer-in-charge.
29.5
-
-
M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, but in CM 1:6 complete all as specified and dircted by Egineer-in-charge.
17.63
-
-
S&F 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork, applying evenly a cost of blown type bitumen at the rate of 1.5Kg/per sqm and binding with clean dry sand @ 0.05 cum per sqm, polythene film, 150 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sq.mtr complete all as specified and directed by Enginer-in-Charge.
14.21
-
-
M&L treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and directed by Engineer-in-Charge.
7.5
-
-
M&L treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed by Engineer-in-charge
105.78
-
-
M&L RCC 1:1.5:3 nomial mix type-1 using 20mm graded aggregate in Beams, cantilevers, bressumemmers, lintels over 1.5m span complete all as specified and directed by Engineer-in-charge.
1.84
-
-
M&L RCC 1:1.5:3 nomial mix type-1 using 20mm graded aggregate in Siabs supported on walls, Beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-charge.
2.8
-
-
M&L Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed by Engineer-in-charge.
955
-
-
M&L Mild steel TMT bars 5mm dia & over, upto & inculudig 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed by Engineer-in-charge.
490
-
-
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work, not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed by Engineer-in-charge.
22.5
-
-
Form work to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor & roofs not exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10 cm but not exc 20cm wide roughed finished surface of concrete complete all as specified and directed by Engineer-in-charge.
21
-
-
Form work to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed by Engineer-in-charge.
12.95
-
-
M&L for hardcore of broken brick basts not exc. 63mm deposited, spread & levelled in layers not exc. 15.cm thick, watered & rammed to a true surface complete all as specified and directed by Engineer-in - charge.
24.68
-
-
M&L 50mm thick PCC type C-1, (1:3:6) using 20mm graded stone aggregate finished even 7 smooth without using extra cement as in plinth protection complete all as specified and directed by Engineer-in-charge.
13.5
-
-
M&L continuous brick edging, with burnt clay bricks of sub class "B' (old size) with width equal to the depth of the brick laid dry on end vertically including sand cushioning 7 filling interstices with sand (Tibba sand) complete all as specified and directed by Engineer-in-charge.
20
-
-
M&L Machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed by Engineer-in-charge.
12
-
-
M&L Sand filling under floors or in foundations including watering and consolidation
16.07
-
-
M&L 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-charge.
60
-
-
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed by Enginer-in-charge.
21.65
-
-
M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and directed by Enginer-in-charge.
54.5
-
-
M&L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed by Engineer-in-charge.
21.65
-
-
M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified directed by Engineer-in-charge.
39.6
-
-
M&L for applying two coats of cement base paint over a coat of primer, white or tinted on new wall surface including preparation of surface complete all as specified and directed by Engineer-in-charge.
54.5
-
-
M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 1 cm width or girth complete all as specified and directed by Engineer-in-charge.
333.73
-
-
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engineer-in-charge.
3
-
-
S&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specifiecation & drawing complete all as specified and directed by Engineer-in-charge.
20
-
-
S&L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, penelling off plain colour PVC sheet to be fitted in the M.S frame welded/ Sealed to the stiles & rails with suitable PVC sheet beading 7 joined together with solvent cement, in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge.
4.85
-
-
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and direceted by Engineer-in-charge.
8
-
-
S&F Aluminium, handles 125mm size, cast type, anodised complete all as specified and directed by Engineer-in-charge.
8
-
-
S&F 100mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-charge.
15
-
-
S&F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all ass specified size of frame 105 x 60mm all as specified and directed.
5
-
-
M&L Cement concrete 1:2:4 tye B-1 filling of pressed steel frame and hold fast blocks etc all as specified and directed.
0.03
-
-
S&F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping/ frame to match complete all as specified and diercted by Engineer-in-charge.
1.5
-
-
S&F Aluminium handle cast type anodized 150mm long all as specified.
2
-
-
S&F Aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or stainless steel 250mm size all as specified and directed.
2
-
-
S&F powder coated anodized aluminum frame for doors, windows, ventilators with one of more rebastes including joining cleat for fixing etc. completed all as specified.
20.04
-
-
S&F Sheet glass frosted one side 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sqm I each pane complete all as specified and dircted by Engineer-in-charge.
2.06
-
-
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapless complete all as specifed and directed.
362.18
-
-
M&L 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-charge.
99.81
-
-
M&L 25mm thick Cement concrete type B-0 1:2:4 (12.5mm graded aggregate) complete all as specified and directed by Engineer-in-charge.
89.31
-
-
S&F Coloured non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:4) complete all as specified and directed by Engineer-in-charge.
14
-
-
M&L for glazed ceramic coloured tiles 7mm thick 300x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer-in-charge.
176.3
-
-
S&F Vitreous China wash down water closet pan (Pedestal Pattern) white excluding fixing bolt including plastic water closet seat cover and mild steel chromium plated or aluminise hinging device and jet spray complete.
1
-
-
S&F Vitreous china squatting pan, orrisa pattern size 580x440mm white, with integral foot rests (Excluding flushing cistern & flush pipe) complete all as specified and directed by Engineer-in-charge.
1
-
-
S&F PVC low level flushing system 10 Ltr capacity with flush pipe comlete as aproved by Eng-in-charge.
2
-
-
S&F Vitreous China urinals, half stall type (Back or corner wall type), Complete including providing and fixind plugs, bedding urinal against wall in cement mortar 1:2 ecuring urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and Uninon for discharge pipe compete all as specified and directed by Engineer-in-charge.
1
-
-
S&F Vitreous China wash basin, white, flat back size 450x300mm excluding taps, wate chain & plug & porcelain stopper but including brackets, CP brass, Waste fittings 32mm bore & PVC waste pipe 32 mm bore compete all as specified and directed by Engineer-in-charge.
2
-
-
S&F CP Pillar taps fancy type 15mm bore, cast copper alloy with capstan heads screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
2
-
-
S&F Angle Stop valves 15mm bore fancy type, CP cast copper alloy screwed down high presre with crutch of butterfly handle, screwed both ends for iron pipe or for uniorns complete all as specified and directed by Engineer-in-charge.
7
-
-
S&F Angle Stop valves 15mm bore fancy type, chromium plated with long shank and cup (cnecealed type) cast copper alloy screwed down high presre with crutch of butterfly handle, screwed both ends for iron pipe or for uniorns complete all as specified and directed by Engineer-in-charge.
2
-
-
S&F Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.
4
-
-
S&F soap dish, chromium plated, 100x10x60mm, fixed to wall with plugs with chrominum plated screws complete all as specified and directed.
4
-
-
S&F brass CP shower rose fancy type 125mm of fixing with 15mm pipe complete all as specfied and directed by Engineer-in-charge.
2
-
-
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 7 fixed in position all as specified in SSR Part 500 ltrs Capacity complete all as specified and directed by Engineer-in-charge.
2
-
-
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-charge.
5
-
-
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washwrs complete all as specified and directed by Engineer-in-charge.
2
-
-
S&F CP Trbular towel rail,20mm dia, D type 60cm long between flanges complete all as specified and directed by Engineer-in-charge.
3
-
-
S&F Stop walves 20mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed by Engineer-in-charge.
2
-
-
S&F Ball valves PTMT 20mmbore, high pressure, with polythene float 7 flynut complete screwed for iron pipe or brass ferrule all as specified and directed by Engineer-n-charge.
2
-
-
Supply & fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.
9
-
-
Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on wall /ceillng or laying in floors complete all as specified.
20
-
-
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as spceified and directed by Engineer-in-charge.
13
-
-
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.
18
-
-
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.
11
-
-
S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal with acces door complete all as specified and directed by Engr-in-charge.
3
-
-
S&F 75mm PVC (SWR) vent cowl complete all as specidied and directed by Engr-in-charge.
2
-
-
S&F 110mm PVC(SWR) bends any radius provided with access door complete all as specified and directed.
3
-
-
S&F 75mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.
4
-
-
M&L 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement compete all as specified and directed by Engr-in-charge
9
-
-
Material and labour DWCPE pipe 150mm dia (160mm OD) completed laid in trenches including earthwork, removal and return filling and jointed including testing alongwith necessary jointing material tees/union/socket etc complete laid on PCC bed 150mm thick PCC in 1:3 type C2 of avg depth 0.90 to 1.65 m depth including packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 and as directed.
6
-
-
M&L PCC in foundations, filling and mass-concrete type C2(1:3:6) using 40mm graded stone aggregate
7.3
-
-
M&L brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in CM (1:4)
1
-
-
M&L PCC in surface channels and drains type B1 (1:2:4) using 20mm graded stone aggregate
0.58
-
-
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extgr cement including forms, moulds mitred/stopped ends etc.
6
-
-
M&L Rendering 15mm thick on fair face of brick work or concrete surfaces CM (1:4) mixed with water proofing complound 3% by weight of cement finished even & smoth without using extra cement (WPC shall be measured 7 paid separately)
25
-
-
M&L Rendering 10mm thick on fair faces of brick work/ concrete surfaces in CM (1:4)
4.32
-
-
Supplying only integral waterproofing compound
6
-
-
M&L precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM (1:6) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces.
0.3
-
-
Excavation in post holes each n. exc. 0.50cm, getting out in soft/ loose soil, returning filling in and ramming earth or broken or broken rubble mixed with earth around, in layers n.exc 25cm, watering and removing surplus soil to a distance n. exc 50cm and making good surface.
53
-
-
S&F Structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes grade St-240 complete all as specified and as shown on drawing.
5711.42
-
-
M&L for plates (plain or chequered) channels, square cut or notched (rodinary and counter sunk) forming holes, without any attchment of Gde Fe 410-W (Gde-E-250) quality B complete all as specified and directed by Engr-in-charge.
759.74
-
-
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-charge.
791.71
-
-
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges etc. self tapping screws as specified and directed by Engr-in-charge.
33.44
-
-
M&L for PCC 1:3:6 type C-1 as in foundation, filling, mass concrete
1
-
-
M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate
155
-
-
M&L 100mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in flooring complete all as specified and as directed.
155
-
-
S&F Glass dividing strips, 3mm thick and 38mm wide
170.5
-
-
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
2540
-
-
M&L for rolled sections as in framing for cladding glazing and the like fixed with angle cleats and connecting plates, etc.
792.96
-
-
M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, n exc 10 kg each brackets, conforming to Fe.290 Gde-E-165 (Brackets over 10 Kg each to be measured under Structural Steel)
102
-
-
M&L Fe 410 - W (GdeE-250) quality A mild Steel plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes without attachment
15.5
-
-
M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, blusters, nosing to steps including embing in concrete and screwing etc wind ties for roof including securing bolts
112
-
-
M&L for two coats of synthetic enamel paint on steel surfaces over one coat of priming with red oxide or zinc chromate of any description,n exc. 10cm in width or gitth, not other wise described surfaces of any description, incl, preparation of new surface when unconnected with other painting or when painted in a different tint
5.95
-
-
M&L for anodised aluminium frame for doors, windows, ventilators, partitions with one more rebates including joining cleat for fixing etc complete all as specified
59.56
-
-
M&L for anodised aluminium window and ventilator shuuters, side hung tupe without sash bars, aluminum sections weighing 0.55 kg/m including necesssary joining cleats, glazing clips, rubber packing anodised aluninium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no) complete all as specified
6.66
-
-
M&L for anodised aluminium door shutters, aluminium section witghing 0.55 kg/m including necessary joining cleats, galzing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified
4.3
-
-
S&F of 4mm thick aluminium partition pannel (APP) fixed to aluminium frame section including necesssary rubber neoprene packing, anodised aluminium snap beading, screws etc complete all as specified
14
-
-
M&L sheet glass selected quality plain 4.8m thickness fixed in alum door/ window shutter cut fo required suze and fixed with PVC/Neoprene gasket etc complete all as specified and directed by Engr-in-Charge (Aluminium snap beading shall be paid separately)
3.5
-
-
M&L Sheet glass selected quality plain4.0mm thickness fixed in alum door/window shutter cut to required size and fixed with PVC/Neoprene gasket etc complete all as specified and directed by Engr-in-Charge (Aluminium snap beading shall be paid separately)
4.97
-
-
M&L brass motice lock 4 levers and 75mm size for aluminium doors
1
-
-
S&F door closer hydraulically regulated, aluminium (Die cast) body, designation No 3, univeral type suitable for door shutter upto 1000mm in width complete all as specified and directed by Engr-in-Charge
2
-
-
Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc
80
-
-
M&L machine cut kota stone slab flooring 18-20cm thick over and incl 20mm thick cement sand screed bed or bedding layer in CM (1:4) laid and jonted with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr-in-Charge complete all as specified and directed
115
-
-
M&L for frame work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soft fits (if any) of foundation and plinth beams and similar work : vertical or to batter rough finish surface of concrete flat complete all as specified and as dircted by Engr-in-charge.
48.16
-
-
M&L form work to sides of pillars, columns etc: rough finfish surface of concrete square, rectangular or polygonal complete all as specified and directed by ngineer-in-charge.
30.72
-
-
M&L for RCC 1:1:5:3 type A-1 (nominal mix) in foundations, including rats, footings, foundation beams: plinth beams: bases for columns, etc: basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.
7.5
-
-
M&L for RCC 1:1:5:3 type A-1 (nominal mix) in columns, pillars, complete all as specified and directed by Engineer-in-charge
2.5
-
-
M&L for rendering, 10 mm thick on brick work or concrete surfaces in cement mortar (1:6) on wall finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
22
-
-
M&L for 5mm thick rendering in cement mortar )1:4) (as second coat), over and including 10 mm thick rendering in cement mortar (1:6) (as first coat) of fair faces of brick work or concrete surfaces of wall, incl mixing only liquid water proofing compound in second layer only as per manufactures instruction, fineshed the surface even and smooth withour using extra cement complete all as specified and directed by Engineer-in-charge.
78
-
-
Supply only liquid water proofing compound all as specified and directed by Engineer-in-charge.
20
-
-
M&L for prerparation and applying two coats of cement base paint n newly plastered surfaces of wall complete all as specified and directed by Enginer-in-charge.
72.6
-
-
M&L for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm depth joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints wth bitument & sand mixture complete all as specified directed by Engineer-in-charge.
26.78
-
-
M&L for framed work as in chowkats of doors windows of angle iron, gates or other section with gusset plates, rails, braces etc conforming t Gde Fe 290, Gde E-165 complete all as specified and directed by Engineer-in-charge.
75
-
-
M&L for mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched: including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with reveted or welded sems, including bending or turning up, mitred angles etc as required
3.78
-
-
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structurte having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
381
-
-
S&F 18mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever requied all the edges shall b covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification as directed by Engineer-in-Charge.
76
-
-
S&F extruded aluminium alloy handles, fabricated type anodized 100 mm long complete all as specified and derected by Engineer-in-Charge.
388
-
-
S&F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer-in-Charge
396
-
-
S&F continous (Piano) type hinges mild steel bright finish or ectro galvanised with wide of flaps 30mm complete all as spd and directed.
214
-
-
Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame).
1
-
-
Taking down chowkats or frames exc. 1.5 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frame).
2
-
-
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
5.1
-
-
Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non
toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
(Note: stainless steel butt hinges and necessary SS screws shall be paid separately)
1.75
-
-
S&F powder coated anodised aluminium (thickness or powder coating not less than 50 micron) window / ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws. fixing arrangememt for wire mesh etc. and making good disturbed surfaces of walls complete all as specified.
0.54
-
-
S&F for Alum door stopper of any descripion all as specified and directed by Engineer-in-charge.
1
-
-
S&F extruded aluminium alloy handle 150mm size fabricated type, anodised, ISI marked .
2
-
-
S&F extruded aluminium alloy handle 125mm size fabricated type, anodised, ISI marked .
8
-
-
S&F Aluminium anodised barrel tower bolt 200mm long of extruded section and fixed
2
-
-
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete
3
-
-
M&L for Granite (of any type) work (table rubbed and polished) 25 mm thick (fixed in two layers) as in window cills, platforms, and similar works in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed (bedding layer) in CM 1:4 all as directed.
2
-
-
Demolation of brick work built in cement mortar
0.5
-
-
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .
0.62
-
-
M&L for RCC 1:2:4 (Nominal Mix) type B-1 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span completed all as specified and directed by Engineer-in-chagre.
0.14
-
-
M&L for preparation of new plastered surfaces of walls by washing, rubbing down & applying two coats of distemper oil emulsion over a coat of 2 mm thick wall care putty (in two coats each coat of 1 mm each) on plastered surfaces of wall complete all as specified.
40
-
-
M&L for preparation of old plastered surfaces of walls and applying a coat of oil bound distemper complete all as specified and directed by Engineer-in-charge.
19.37
-
-
M&L for preparation of plastered or unplastered ceiling surfaces and applying a coat of distemper oil emulsion complete all as specified.
15.81
-
-
M&L applying one coat of cement based paint on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.
20
-
-
Demolition of cement concrete in ground floors and pavings n exc. 15 cm thickness (below or above ground level)
1.03
-
-
Dismantling floor, hearth or wall tilling incl cement mortar beding (but not backing), removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge
10.31
-
-
S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. over 15mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match
10.31
-
-
M&L for Virified Ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, over 15mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified.
10
-
-
M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete
12
-
-
S&F 20 mm bore Nipple suitable for HDPE water tank. (Minimum weight 25mm- 65gms)
1
-
-
M&L for new 15 mm bore galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors
12
-
-
M&L for new 20 mm bore galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors
8
-
-
S&F single piece WC of size 755x365x655 mm with 300 mm S-trap including UF soft close slim seat cover, hinges, dual flush cistern fitting and fixing accessories complete all as specified and directed by Engineer-in-Charge. Make : Jaquar CAT Part No. LYS-WHT-0204 or equivalent as approved by GE.
1
-
-
S&F vitreous china table top wash hand basin of size 185x490x410 mm including CP coupling and waste pipe complete all as specified and directed by Engineer-in-Charge. Make : Jaquar CAT Part No. FNS-WHT-0540 or equivalent as approved by GE.
1
-
-
S&F brass chromium plated single lever basin mixer without popup waste system with 450 mm long braided hoses fixed complete as directed by Engr-in-charge. Make : Jaquar CAT Part No. DRC-37011B or equivalent as approved by GE.
1
-
-
S&F brass chromium plated concealed high flow bath and shower mixer with thermostatic control cartridge, screwed down for iron pipe and fixed as directed by Engr-in-charge. Make : Jaquar CAT Part No. KUB-35671HF or equivalent as approved by GE.
1
-
-
S&F brass chromium plated bath tub spout with wall flange, screwed down for iron pipe and fixed as directed by Engr-in-charge. Make : Jaquar CAT Part No. SPJ-35429 or equivalent as approved by GE.
1
-
-
S&F soap dispenser with glass bottle complete as directed by Engr-in-charge. Make : Jaquar CAT Part No. ACN-1135N or equivalent as approved by GE.
1
-
-
S&F chromium plated towel ring square with round flange complete as directed by Engr-in-charge. Make : Jaquar CAT Part No. AKP-35721P or equivalent as approved by GE.
1
-
-
S&F chromium plated towel rack 600 mm long with lower hangers complete as directed by Engr-in-charge. Make : Jaquar CAT Part No. AKP-35781P or equivalent as approved by GE.
1
-
-
S&F corner glass shelf with brackets complete as directed by Engr-in-charge. Make : Jaquar CAT Part No. ACN-1173 or equivalent as approved by GE.
1
-
-
S&F Tumbler holder complete with fittings as directed by Engr-in-charge. Make : Jaquar CAT Part No. AKP-35741P or equivalent as approved by GE.
1
-
-
S&F soap dish holder complete with fittings as directed by Engr-in-charge. Make : Jaquar CAT Part No. AKP-35731P or equivalent as approved by GE.
1
-
-
S&F stainless steel toilet paper holder with flap recessed type complete with fittings as directed by Engr-in-charge. Make : Jaquar CAT Part No. AHS-1553 or equivalent as approved by GE.
1
-
-
S&F Hand shower (health faucet) with 8 mm dia, 1 meter long flexible tube abd wall hook with NRV (back flow preventer) complete with fittings as directed by Engr-in-charge. Make : Jaquar CAT Part No. ALD-577 or equivalent as approved by GE.
1
-
-
S&F 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified. Make : Jaquar ,Cera or equivalent as approved by GE.
5
-
-
S&F brass chromium plated shower rose 150 x 150 mm size with swivel joint including 450mm chromium plated rod fixed to 15 mm dia steel pipe or union complete all as specified and directed by Engineer-in-charge. Make : Jaquar, Cera or equivalent as approved by GE.
1
-
-
S&F CP grating suitable for 75/100 mm bore floor trap and fixed with white cement complete all as specified.
2
-
-
S&F PVC connection both side brass unions internal for size 15mm dia and 600mm long complete all as specified and directed by Engineer-in-Charge.
2
-
-
S&F 8 mm thick looking mirror of size 600 x 600 mm, corners rounded with decorative lining all around of selected quality glass, fixed with fancy chromium plated brass screws and cup washers complete all as specified.
1
-
-
S&F EWC jet spray complete all as specified and directed.
1
-
-
S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110 mm bore.
3
-
-
S&F UPVC (SWR) vent cowl of 110 mm bore.
1
-
-
M&L for cement concrete 1:3:6 type C-2 (using 40 mm graged stone aggregate) as in concrete bed to drain pipes of n exc. 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge.
6
-
-
Cutting into existing manholes for connecting new drains (internal dia of pipe 100 mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.
1
-
-
M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point/fan point/exhaust fan controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).
42
-
-
All as per Srl item No. 175 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified.
11
-
-
All as per Srl item No. 175 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified.
5
-
-
S&F switch Piano type single pole one way 5 Amp,230 VAC supply.
43
-
-
S&F socket two in one ,3 Pin 5 Amps 230 VAC supply, .
11
-
-
Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .
6
-
-
M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.
36
-
-
S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed.
8
-
-
S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed.
4
-
-
S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 4 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..
4
-
-
S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.
16
-
-
S&F for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
4
-
-
S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 3 core
58
-
-
S&F of Exhaust fan 250 mm 240 volts with metal body and louvers with incl all accessories and including making hole, fixing, plastering, painting with existing color at site, after finishing the work all as specified and directed.
4
-
-
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 25 mm dia bore.
12
-
-
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 20 mm dia bore.
33
-
-
S & F stop valve size 25 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.
2
-
-
S & F stop valve size 20 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.
3
-
-
M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.
7
-
-
S&F switch Piano type single pole one way 15 Amp on laminated sheet top cover complete to all as specified.
5
-
-
S&F socket Pinao type 6 Pin 16 amp,230 V AC
5
-
-
Supply and fixing ceiling fans complete with blades,downrods,electronic regulator and accessories.230 V ,1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor( BLDC)
5
-
-
S&F of fan regulator step down electronic type heavy duly flush type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring).
5
-
-
M & L for Sub main wiring with 2 single core 4 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 4 Sqmm single core copper earth wire complete all as specified.
(Note:- Three lengths of 4 sqmm cable and will be measured as one length).
50
-
-
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 16 sq mm.
40
-
-
Supplying and laying un-reinforced precast concrete cable cover, class LV, type -I, flat peak, size 250 mm x 150mm x 40mm complete all as directed by Engr - in charge
112
-
-
S&F switch Modular type single pole one way 5 Amp,230 VAC supply.
15
-
-
S&F socket modular type two in one ,3 Pin 5 Amps 230 V AC supply, .
5
-
-
S&F switch Modular type single pole one way 15 Amp on laminated sheet top cover complete to all as specified.
2
-
-
S&F socket modular type 6 Pin 16 amp,230 V AC
2
-
-
S & F fastner clamp for hanging ceiling fan and make necessary space in ceiling for hanging all as specified and directed by Engineer-in-charge.
1
-
-
S &F LED warm white light 20 watt ( 4 feet long) energy efficient with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 20 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.
5
-
-
S &F mirrror ligh LED warm white light 5/7 watt energy efficient with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 20 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.
2
-
-
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safety valve,thermostate,NRV, connection piece etc all as specified and directed by Engineer-in-charge.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements