Military Engineer Services Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 75,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Ges/pkt/t-19/2020-21certain Rep Maint Of Int Elect Ceiling Exhaust Ventilation Fans Lightening Protection System Geysers And Other Allied Works At Md Accn And Otm Accn Incl 167 Mh At Dhangu Mil Complex Under Ge S Pathankot
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_MES_362944_1Bid Award Id
ViewTender No
GES/PKT/T-19/2020-21Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Existing pages of BOQ are hereby cancelled and replaced with revised pages of BOQ are enclosed herewith.
BOQ Items
... More
Replacement of old unserviceable gun metal bush of ceiling fan complete all as spd and directed.
160
-
-
... More
Replacement of old unserviceable capacitor AC 400/415 volts 2.5 mfd ISI marked complete all as spd.
520
-
-
... More
All as per Srl item above but 3.15mfd complete all as spd.
520
-
-
... More
All as per Srl item above but 4mfd complete all as spd.
83
-
-
... More
Replacement of old unserviceable ball bearing suitable for 1200/1400 mm sweep complete. Make NBC/SKF (bearing with 8 balls shall only be used) complete all as spd.
820
-
-
... More
Replacement of old unserviceable shackle assy kit (rubber real -01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.
550
-
-
... More
Replacement of old unserviceable fan blades, ISI Marked, suitable for 1200/1400mm sweep ceiling fan of any make complete all as spd.
330
-
-
... More
Repalcement of old unserviceable MS down rod of appropriate External dia of ceiling fan complete (length of rod not less than 45cm and not more than 60cm and 15 mm dia) complete all as spd.
390
-
-
... More
S & F Canopy for ceiling fan as per existing sample complete all as specified and as directed.
440
-
-
... More
S & F PVC Two way connector for ceiling fan complete all as specified and directed.
440
-
-
... More
Replacement of old unserviceable steel screw (to be used for fixing of fan blade) as per sample/site requirement/Make of fan complete all as spd.
3300
-
-
... More
Servicing of ceiling fans of capacity 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed by Engr-in-Charge. (Unserviceable parts if any will be measured and paid seperately).
715
-
-
... More
Supply and Fix cable PVC insulated and overall sheathed with flexible copper conductor Single core of size 1.0 sqmm complete all as specified and directed.
770
-
-
... More
Dismantling and Re-winding of exhaust fan/industrial wall mounting fan/pedstral fan motor 250-300 mm sweep any make of fan with super enameled copper winding wire of suitable gauge as per existing including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections fan complete all as spd and directed (Note :- (i) Doctor brand or equivalent ISI brand varnish shall only be used).(ii) Motor shall be wound with machine only.(iii) BIC/HTP or DEVIDYAL, make super enameled copper winding wire shall only be used.
45
-
-
... More
All as per Srl item above but 350mm-450mm sweep complete all as spd and directed..
45
-
-
... More
All as per Srl item above but 500mm-750mm sweep complete all as spd and directed..
5
-
-
... More
S & F louver, suitable for exhaust fan of any make and size upto 300 mm, fixed in repair complete all as specified and as directed.
45
-
-
... More
All as per items above but of size 400 mm
45
-
-
... More
All as per items above but of size 450 mm
45
-
-
... More
Removing old paint by scraping with sand paper including washing and filling cavaties with filter and applying two coats of painting to ceiling fan 1200-1400mm sweep at site with synthetic enamel paint by spray painting Complete all as specified and directed.
88
-
-
... More
Removing old paint by scraping with sand paper including washing and filling cavaties with filter and applying two coats of painting to exhaust fan/wall mounting fan/Padestial Fan of any sweep at site with synthetic enamel paint by spray painting Complete all as specified and directed.
45
-
-
... More
Supply and fixing in repair ceiling fans 1200 mm Sweep Ceiling Fan, Energy Saving 5 Star Rated, With Remote Control and BLDC Motor complete with canopy, blades, down rod, split pin etc complete of approx wattage 30 to 32 Watt rated suitable for operation on AC 220-240 V AC, 50 HZ, PF 0.95, Air delivery approx 230 cum/min with 5 speed control including dismantling old UNSV fan and depositing to MES store yard. Make: Havells Efficiencia (BLDC 32 Watt)/ Panasonic Model DC F-12XDA (BLDC) or equivalent in Bajaj/Orient/Crompton
40
-
-
... More
Supply and fixing in repair Ventilation fan AC sinlge phase 230/240 volts of size 225 to 250 mm sweep PVC body with louvre including connecting to ceiling rose and dismantling old UNSV fan and depositing to MES store yard all as specified and directed.
26
-
-
... More
Supply & Fix Exhaust fan AC sinlge phase 230/240 volts of size 300 mm sweep steel body with louvre including connecting to ceiling rose and dismantling old UNSV fan and depositing to MES store yard all as specified and directed.
26
-
-
... More
Disconnecting the inlet/outlet water connections and electric connections of Storage storage type electric water heater of capacity 50/25 Ltrs capacity, taking down carefully from wall after unscrewing nut/bolts ,checking the outer body for any cracks and strip opening the same carefully for thorough inspection of serviceablity/functionality of parts such as internal tank, syphon assembly, thermostat switch, heating element, glass wool etc, servicing complete and re-assembling and re-fixing after repair,fixing to wall testing, installation and commissioning all as directed. Note: (a) The spares required for replacemeny shall be measured and paid under relevant Schedule items of Sch here-in-after.
33
-
-
... More
Supply only internal SS tank of storage type electric water heater of 50 ltr capacity complete with syphon –assembly, 2.0 KW element , rubber gasket , thermostat switch , all as specified and directed for carrying out repairs under relevant item No.28 . Note :- The tank shall be tested at site and shall be able to with stand requisite pressure . Necessary testing equipment shall be arranged by the contractor . Tank with stud type round element shall only be used . (Triangular element shall not be allowed .)
5
-
-
... More
Supply only internal SS tank of storage type electric water heater of 25 ltr capacity complete with syphon –assembly, 1.5 KW/2.0 KW element , rubber gasket , thermostat switch , all as specified and directed for carrying out repairs under relevant item No.28 . Note :- The tank shall be tested at site and shall be able to with stand requisite pressure . Necessary testing equipment shall be arranged by the contractor . Tank with stud type round element shall only be used . (Triangular element shall not be allowed .)
27
-
-
... More
Supply only syphon assembly made out of SS of 50 ltr capacity including necessary studs screws and rubber gasket/washers matching with existing/new inner tank complete all as spd and directed for carrying out repairs under relevant item No. 28.
4
-
-
... More
All as per Srl item above but 25 ltr capacity.
25
-
-
... More
Supply only thermostat switch ISI marked for storage type electric water heater AC 230 volt adjustable range from 0-90 degree Celsius ) for carrying out repairs under relevant item No. 28.
30
-
-
... More
Supply only cup type storage type electric water heater element AC 230 volt, of rating 1500/2000 watt for carrying out repairs under relevant item No. 28.
15
-
-
... More
Supply only triangular type storage type electric water heater element AC 230 volt, of rating 1500/2000 watt for carrying out repairs under relevant item No. 28.
15
-
-
... More
Supply only outer body suitable for 50 ltr storage type electric water heater made out of MS sheet factory made complete with fixing bracket matching with existing complete all as specified and directed for carrying out repairs under relevant item No. 28.
4
-
-
... More
Supply only outer body suitable for 25 ltr storage type electric water heater made out of MS sheet factory made complete with fixing bracket matching with existing complete all as specified and directed for carrying out repairs under relevant item No. 28.
25
-
-
... More
Supply only glass wool of 25 ltrs capacity storage type electric water heater complete all as specified and directed for carrying out repairs under relevant item No. 28.
25
-
-
... More
All as per sl item above here in before but in 50 ltrs capacity storage type electric water heater for carrying out repairs under relevant item No. 28.
4
-
-
... More
Supply only indicator lamp square/round type suitable for storage type electric water heater 25/50 ltr all as per sample AC 230 Volt for carrying out repairs under relevant item No. 28.
15
-
-
... More
Supply and replacement cable flexible PVC insulated, PVC sheathed, copper conductor, 3 core 70/.0076mm.
40
-
-
... More
Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed. Make: C&S/Hager/Indoasian/Havells.
30
-
-
... More
De-scaling of storage type electric water heater of capacity 25/50 ltr after taking down the storage type electric water heater from wall, strip opening the assembly, de-scaling the syphon assembly and refixing the assembly and re-installation of storage type electric water heater complete all as directed by Engineer-in –Charge.
30
-
-
... More
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm ISI Marked all as specified and as directed.
60
-
-
... More
Replacement of spring loaded air release valve ISI marked suitable for 25 and 50 ltrs capacity storage type electric water heaters.
25
-
-
... More
Replacement of safety valve / dead wt. valve ISI marked suitable for 25, and 50 Ltrs capacity storage type electric water heaters.
25
-
-
... More
Supply and replace pillar taps, cast copper alloy with capastan heads, chromium plated, screwed down high pressure with lettered ‘Hot or Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed fancy type of size 15 mm .
20
-
-
... More
Supply and fix gun metal glove or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 15mm.
20
-
-
... More
Supply and fixing anchor bolt 12mmX100mm long complete all as spd and directed (Note:- Anchor bolt shall be grouted with hammer drill only)
100
-
-
... More
Preparing the old surface by rubbing/scratching the old paint and providing the two coats of synthetic enameled paint through spray paining of 50 ltr storage type electric water heater.
2
-
-
... More
All as per Srl item above but 25 ltr capacity –ditto-
25
-
-
... More
Supply and replace brass non return valve suitable for 25/50 ltr storage type electric water heater of size 15 mm.
30
-
-
... More
Supply and replace bottom cover plate of storage type electric water heater of capacity 25/50 ltr complete with MS screw all as per sample.
30
-
-
... More
Dismantling of Insulated hot water storage tank of capacity 200/300/500 Ltrs connected Solar Evacuated collectors/flat collectors and cold water tank with GI fittings & PVC pipe connection. Servicing,Testing, Commissioning & descaling of Hot water storage tank removing of corrosion/dust, replacement of UNSV PVC pipe after re-fixing the same.
2
-
-
... More
Service and descaling of Solar Evacuated tube Collector/Flat collectors with sulphuric acid by forcefully injecting the hot chemical into collector for number of times to clean the Solar Solar Evacuated tube Collector/Flat Plate Collector and assembled the same.
2
-
-
... More
S & F in replacement of Evacuated tube collector for Solar Water Heater of capacity 200 LPD of suitabale size as per sample approved by Engineer -in-charge on the gound.
1
-
-
... More
S & F in replacement of Evacuated tube collector for Solar Water Heater of capacity 300 LPD of suitabale size as per sample approved by Engineer -in-charge on the gound.
1
-
-
... More
S & F in replacement of Evacuated tube collector for Solar Water Heater of capacity 500 LPD of suitabale size as per sample approved by Engineer -in-charge on the gound.
1
-
-
... More
Replacement of heating element 2/3 KW suitable for stand by back up supply to solar water heater.
2
-
-
... More
M & L for replacement of unserviceable stop valves and S & F stop valves , cast copper allow, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or fixed Size 15mm ISI mark.
10
-
-
... More
Supply and fix in replacement of rational moulded polyethylene water storage tank with float valve of 1000 Ltr storage cap with proper fixing on stand with Including suitable connected with accessories as specified or directed by Engr-in-carge (Note: MS Angle measured and paid separately)
2
-
-
... More
S&F laminated sticker of size 8"x12" having background of navy blue and letters of white colour as directed by Engr-in-charge. The words shuold have in capital letters. The following do's and don't shall mentioned of the sticker :-
30
-
-
... More
DO'S
-
-
-
... More
(i) The storage type electric water heater should be switched on 60 to 75 minutes before the actual time when hot water is required.
-
-
-
... More
(ii) Switch off the storage type electric water heater during night.
-
-
-
... More
(iii) Switch off the storage type electric water heater when not required for 3 to 4 hours continuously.
-
-
-
... More
(iv)The indicator lamp indicates that the current is passing through the heating element and water heater is working.
-
-
-
... More
(v) In case any water leak is noticed from any part of storage type electric water heater including accessories, should be reported to MES.
-
-
-
... More
DON'TS
-
-
-
... More
(i) Don’t Keep the storage type electric water heater switched on during night or at the time when not required.
-
-
-
... More
(ii) Don't adjust the high pressure reducing valve.
-
-
-
... More
(iii) Don't use the storage type electric water heater when indicator lamp is not working.
-
-
-
... More
(iv) Don't use the storage type electric water heater when three pin plug with necessary earthing connection have not been provided.
-
-
-
... More
(v) Don't switch on the storage type electric water heater if water does not come out from the delivery tap.
-
-
-
... More
(vi) Don't close inlet water stopcock.
-
-
-
... More
Dismantling old unserviceable storage type electric water heater and Supply, install, testing and commissioning of storage type electric water heater of 25 ltr capacity, BEE 5 star rated suitable for 8 bar pressure with nano polymer coated tank, incoloy heating element, rust proof ABS body etc complete all as specified and directed.
6
-
-
... More
Dismantling old unserviceable storage type electric water heater and depositing it to MES store yard. Supply, install, testing and commissioning of storage type electric water heater of 50 ltr capacity, BEE 5 star rated suitable for 8 bar pressure with nano polymer coated tank, incoloy heating element, rust proof ABS body etc complete all as specified and directed.
2
-
-
... More
Disconnecting the water connections and electric connections of Desert coolers of capacity 3000 CFM to 5000 CFM, taking down carefully from stand/ CC supports ,checking the outer body for any damage and strip opening the same carefully for thorough inspection of serviceablity/functionality of parts such as fan assembly with motor (blower assly),water pump, khas khas pad , control wiring , selector switch etc, servicing complete and re-assembling and re-fixing after repair,fixing to wall testing, installation and commissioning all as directed. Note: (a) The spares required for replacement shall be measured and paid under relevant Schedule items of Sch here-in-after.(b) Any other minor spares such as nut bolts, screws,piano switch, indication lamp replacement required is deemed to be included in quoted rate.
55
-
-
... More
Supply only wiring for desert cooler including all accessories all complete diected for carrying out repairs under relevant item.
65
-
-
... More
Supply only blower motor of single way shaft 240 Volts 50 c/s of suitable capacity for desert cooler of capacity 3000 CFM to 5000 CFM single way shaft 240 Volts 50 c/s complete all as specified and directed for carrying out repairs under relevant item.
75
-
-
... More
Supply only water circulation pump suitable for desert cooler of capacity 3000 CFM to 5000 CFM 240 volts 50 c/s single phase complete all as specified and directed for carrying out repairs under relevant item.
85
-
-
... More
Supply only Khaskhas pad honey bee type (set of 3) for Desert Cooler of any capacity ( Set of three) complete all as specified and directed for carrying out repairs under relevant item.
185
-
-
... More
Removing the old paint from the body of desert cooler making the body dust proof and preparing the surface and painting the desert cooler with 2 coats of synthetic enamel paint of superior quality over a coat of Red Oxide primer all as specified.
85
-
-
... More
Removing the old rusted base tub of desert cooler of 3000 to 5000 cfm capacity and fabrication of base tray and top cover made of PGI sheet of minimum 0.8 mm thick sheet and fixing in position using necessary nuts, bolts and washers all as specified and directed.
20
-
-
... More
S&F in replacement of existing UNSV galvanized iron top cover of minimum 0.8 mm thick sheet per and providing new one of existing size, gauge and shape ,nuts and bolts suitable for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed
25
-
-
... More
S&F in replacement of existing UNSV galvanized iron side pillar of minimum 0.8 mm thick sheet as per and providing new one of existing size and shape ,nuts and bolts suitable for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed by Engr-in-Charge
25
-
-
... More
S&F in replacement of existing UNSV galvanized iron side shutter of minimum 0.8 mm thick sheet as per and providing new one of existing size and shape ,nuts and bolts suitable for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed by Engr-in-Charge.
25
-
-
... More
Material and labour in replacement of existing UNSV PVC front show grill complete with selector switch piano type switch and indicator etc as per requirement for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed.
30
-
-
... More
Material and labour in replacement of Fan blade hub assly only for Blower motor of desert cooler made of alloy/Forged steel suitable for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed
30
-
-
... More
Material and labour in replacement of Leg set complete for fixing blower motor for desert cooler complete with all necessary fixing/Fastening arrangements(As per sample) suitable for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed
30
-
-
... More
Material and labour in replacement of water distributor and PVC pipe connection for water connection of desert cooler 3 piece (length not less than 35 cm each piece)(As per sample) suitable for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed
30
-
-
... More
Supply and fix in replacement existing UNSV Recess/suspended slim LED panel light with powder coated rim 36 watt of size 2x2 feet high efficiency designer recessed mirror optic luminary with ceiling cut out size 36 watt including LED lamps complete including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required and specified by Engr-in-Charge.
32
-
-
... More
Dismantling old defective desert cooler and Supply, install, test and commissioning of desert cooler electric driven, single phase of approx minimum size 575x575x800 mm made out of 0.8 mm thick GI sheet for body, with water tank of capacity 50 Ltr made out of 1 mm thick and with front grills and side direction grills, suitable for minimum air Delivery- 4000 Cum/hr,approx 450 mm sweep fan size with mild steel curved blades duly painted with synthetic anti corrosive paint, fitted to body including prewired electric 4 speed switch control and one 6Amps piano switch. Water immersed pump of suitable capacity 1300 RPM rated suitable for 230 volts, 50 Hz AC supply and one 6 Amps piano switch with fan motor of minimum capacity 105 watt, 1400RPM, 230 volts, 50 Hz and water inlet pipe with brass float valve of size 15mm and outlet with brass drain plug of 20mm .The pad of 3 sides shall be of honeycomb type, including stand of minimum height 900 mm made out 25mmx25mmx3mm MS angle iron , duly coated with weather proof paint of black colour
8
-
-
... More
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked)of size 15mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing). and dismantling old defective earthpit.
27
-
-
... More
Material and labour earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing). and dismantling old defective earthpit.
17
-
-
... More
Material and labour earthing with copper plate 60×60cm ×3.15mm thick electrode
and 20×3mm copper strip as earthing lead, buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to20×3mm copper strip as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe,Copper earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing) and dismantling old defective earthpit.
14
-
-
... More
M&L for fixing in repairs Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with galvanised iron strip 32x6 mm including dismantling old one. .
280
-
-
... More
M&L for fixing in repairs Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with 4mm dia galvanised iron or steel wire including dismantling old one.
250
-
-
... More
M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated location for loop earthing etc. with 20x3mm copper strip including dismantling old one.
80
-
-
... More
Supply and lay GI tubes light grade galvanised with all fittings laid in trenches etc for protection of cable of following sizes:-
-
-
-
... More
a) 40 mm dia bore
6
-
-
... More
b) 50 mm dia bore
6
-
-
... More
Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6, type C1 matching with the surroundings all as directed.
2
-
-
... More
Supply and fix in repair Aluminium strip 25 x 3.15mm with saddles and fixing
screws etc. for roof conductors and down conductors above ground complete with saddles and insulators made out of porcelain and fixing screws for roof conductor/down conductor including nut bolts& washers drilling and riveting for joints of suitable size as required at site all as specified and directed by Engr -in- Charge. Note :- Porcelain insulators are to be fixed at an interval of not more than 75 cm
180
-
-
... More
Supply and fix in repair Copper strip 20 x 3.15mm with saddles and fixing
screws etc. for roof conductors and down conductors above ground complete with saddles and insulators made out of porcelain and fixing screws for roof conductor/down conductor including nut bolts& washers drilling and riveting for joints of suitable size as required at site all as specified and directed by Engr -in- Charge. Note :- Porcelain insulators are to be fixed at an interval of not more than 75 cm
90
-
-
... More
Supply and fixing in repair air termination single pointed aluminium rod 12mm dia and 300 mm long for fixing on GI pipe medium grade 40mm dia pipe duly making suitable fixing arrangement of one end of air termination rod all as specified and directed by engr-in-charge. Note: GI pipe required will measured and paid separately.
30
-
-
... More
Supply and fixing in repair air termination single pointed copper rod 12mm dia 12mm dia and 300 mm long for fixing on GI pipe medium grade 40mm dia pipe duly making suitable fixing arrangement of one end of air termination rod all as specified and directed by engr-in-charge. Note: GI pipe required will measured and paid separately.
9
-
-
... More
M&L for plain Cement concrete 1:2:4 type B-1, (Using 20 mm graded aggregate) as in foundation block for fixing GI pipe for installation of air termination rod etc. complete all as specified Note:- Unit rates includes for provn of form work for rough finished surfaces and finishing the exposed surfaces with 5 mm thick rendering in CM 1:3 all specified.
1.5
-
-
... More
Supply & Fixing in repair GI pipe medium grade 40 mm dia for fixing Aluminium strip 25x3.15 mm on roof for lightening protection duly drilling 2 Nos holes on Aluminum strip and GI pipe on one end and fixing with screws/suitable size of bolts & nuts complete all as specified. Note: GI Strip required will measured and paid separately.
25
-
-
... More
Supply and fixing in repair Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screws including provision of 30 cmx25cmx8cm sheet metal box made out of 3.15 m thick CRCA sheet with front hinged door shutter & locking arrangement and duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.
30
-
-
... More
Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified and directed.
2067
-
-
... More
M&L for point wiring with FRLS PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm in FRLS PVC concealed conduit heavy duty and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and drawing 1.5 sqmm PVC insulated fire retardant stranded copper conductor cable as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed by Engr-in-Charge.( In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) Proper colour coding is to be followed as per IS Specification. (b) Test certificates of cables to be submitted before commencement of work/ claiming for payment.(c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement.(d) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment
1176
-
-
... More
All as per srl item above here in above but for one light point controlled by 2 nos two way switches.
19
-
-
... More
All as per srl item above here in above but for one 3 pin 5A socket outlet independent board.
291
-
-
... More
All as per srl item above here in above but for one 5A socket outlet on the same board
159
-
-
... More
All as per srl item above here in above but for one 5A socket outlet below the board.
17
-
-
... More
All as per srl item No 97 here-in-before but for 15/16 Amps socket out let independent with 4.0 sqmm copper conductor and –ditto-.
159
-
-
... More
M & L for replacement of existing un-serviceable switch with switch piano polycarbonate body flush button single pole two way 5 amps, 230 volts.
24
-
-
... More
M & L for replacement of existing old u/s switch with switch piano polycarbonate body type single pole one way 5/6 Amp, 230 volts.
1589
-
-
... More
M & L for replacement of existing old u/s switch with switch piano polycarbonate body type single pole one way 15 Amp, 230 volts.
242
-
-
... More
M & L for replacement of existing old u/s switch socket combination with socket combination Polycarbonate body 2 in 1, 3 pin, 5 Amp and 15 Amp flush type all as specified and directed.
26
-
-
... More
M & L for replacement of existing old u/s switch socket combination with socket combination Polycarbonate body ,5 pin , 5 Amp flush type all as specified and directed.
231
-
-
... More
M & L for replacement of existing old u/s socket outlet with socket outlet Polycarbonate body , 5 pin 5 Amp flush type all as specified and directed.
286
-
-
... More
M & L for replacement of existing old u/s socket outlet with socket outlet Polycarbonate body 2 in 1, 3 pin, 5 Amp and 15 Amp flush type all as specified and directed.
240
-
-
... More
M & L for replacement of existing old u/s bell push with bell push polycarbonate body type 5/6 Amp, 230 volts.
40
-
-
... More
M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified.
80
-
-
... More
M and L for replacement of existing old u/s fan regulator with fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed
80
-
-
... More
M & L for replacement of existing old u/s ceiling rose with ceiling rose Polycarbonate body surface bakelite 2 to 3 terminals, 230 volts.
900
-
-
... More
S & F for replacement of existing old u/s lamp holder with lamp holder batten type polycarbonate body with back plate for batten fitting all as directed. Note for item No 99 to 110: The quoted rate inclusive for the following :-.(a) The material shall be ISI marked. In case of non-availability, the certificate for the same to be submitted (b) Test certificates to be submitted before commencement of work/ claiming for payment.(c) Warranty certificate for minimum 2 years to be submitted from OEM.
240
-
-
... More
M&L for Modular point wiring with FRLS PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm in FRLS PVC concealed conduit heavy duty and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and drawing 1.5 sqmm PVC insulated fire retardant stranded copper conductor cable as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed by Engr-in-Charge.( In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) Modular inner and outer frame plate shall be included in quoted rates (b) Proper colour coding is to be followed as per IS Specification. (c) Test certificates of cables to be submitted before commencement of work/ claiming for payment.(d) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement.(e) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment
165
-
-
... More
All as per srl item above here in above but for one 3 pin module socket out let 5/6 Amps on same board.
39
-
-
... More
All as per srl item above here in above but for one module socket out let 5/6 Amps on Independent board.
66
-
-
... More
All as per srl item above here in above but for one module socket out let 5/6 Amps on below the board.
12
-
-
... More
All as per srl item above here-in-before but for 15/16 Amps socket out let independent with 4 sqmm copper conductor and –ditto-.
24
-
-
... More
M & L for replacement of existing un-serviceable switch piano with Modular switch 1 way 6A, 1 module ISI marked complete all as spd and directed complete all as spd and directed.
282
-
-
... More
M & L for replacement of existing un-serviceable switch piano with Modular switch 2 way 6A, 1 module ISI marked complete all as spd and directed complete all as spd and directed.
4
-
-
... More
M & L for replacement of existing un-serviceable switch piano with Modular switch 1 way 16A, 1 module ISI marked complete all as spd and directed complete all as spd and directed.
88
-
-
... More
M & L for replacement of existing un-serviceable bell push with Modular bell push 6A, 1 module ISI marked complete all as spd and directed complete all as spd and directed.
30
-
-
... More
M & L for replacement of existing un-serviceable socket outlet with Socket, 6A - 2/3 pin combined 2 module complete all as spd and directed complete all as spd and directed.
117
-
-
... More
M & L for replacement of existing un-serviceable socket outlet with Socket, 16A - 2/3 pin combined 2 module complete all as spd and directed complete all as spd and directed.
88
-
-
... More
M & L for replacement of existing un-serviceable fan regulator with modular fan regulator step type 120 watts 2 module complete all as spd and directed complete all as spd and directed. Note for item No 116 to 122: The quoted rate inclusive for the following :-.(a) The material shall be ISI marked. In case of non-availability, the certificate for the same to be submitted (b) Test certificates to be submitted before commencement of work/ claiming for payment.(c) Warranty certificate for minimum 2 years to be submitted from OEM.
44
-
-
... More
M & L for replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.
260
-
-
... More
M & L for replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. Note for items No 123 & 124: The quoted rate inclusive for the following :- (a) Proper colour coding is to be followed as per IS Specification. (b) Test certificates of cables to be submitted before commencement of work/ claiming for payment.(c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement.(d) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment
170
-
-
... More
Supply and Fix in replacement existing UNSV tube light fitting with LED 20W inverter batten type fitting 4 feet long aluminium extruded housing, charging time 10-12 Hrs with 04 Hrs backup,IP-20 ,rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.
220
-
-
... More
M & L for replacement of existing old u/s tube light fitting with energy saving decorative batten type fitting with LED tube rod 18/20 watt energy efficient tube light fittings LED complete with 4 feet long channel type made out of CRCA sheet powder coated complete with housing with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fittings ( fittings shall be fitted on two plastic square/round block. Note power factor should not be less than 0.90.
170
-
-
... More
S & F for replacement of LED tube rod 18/20 watt energy efficient tube light 4 feet long .
220
-
-
... More
Supply and fixing LED Bulk head light fitting 1X10watts suitable for compact fluorescent lamp complete , connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required
30
-
-
... More
M & L for replacement of existing old u/s mirror light fittings with sleek energy efficient decorative LED mirror light 10 watts, 2 feet with diffuser complete with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings ( fittings shall be fitted on two plastic square/round block. Note power factor should not be less than 0.90.
30
-
-
... More
Note for item No 125 to 129 : (i) Driver efficiency more than 85% ( Constant current driver) (ii) Non isolated type driver (iii) THD less than 20% (iv) LED driver current less than 60 mA (v) Efficiency of LED Chip more than 130 lm/watt (vi) Efficiency of LED Fixture 100 lm/watt (vii) Surge protection 2.5 KV & above as per IEC standard (viii) working humidity 95%RH (ix) LED Make Nichia /Philips lumiled/ Cree/Osram/Seoul/Bridgelux/Nationsear (x) Life 50000 Hrs at 70% lumes (xi) CRI more than 80 (xii) Working temp -10 degree to 50 degree C (xiii) Heat Sink extruded aluminum (xiv) junction temperature 85 degree C (xv) Body of fitting Extruded Aluminum (xvi) impact code Min IK 03 or more ( xvii) LM79 report from thir party (instead of company in house lab) NABL/UL accredited lab (xviii) LM 80 report from LED manufacturer (xix) Low/High voltage, reverse polarity, overload and short circuit protection inbuilt in fixture (xx) IP-20 .(xxi) Test certificates to be submitted before commencement of work/ claiming for payment .(xxii) Warranty certificate for minimum 2 years to be submitted from OEM.
-
-
-
... More
S&F LED Lamp 230 volts,50 Hz,inverter LED 9 watt ,lumen 900 lm, Charging time 8 to 10 Hours, backup time 04 Hrs, operating temperature -10 to 50 degree celcius,back time 04 Hours, complete all as specififed and direccted.
120
-
-
... More
S&F LED Lamp 230 volts,50 Hz,inverter LED 12 watt ,lumen 1200 lm, Charging time 8 to 10 Hours, backup time 04 Hrs, operating temperature -10 to 50 degree celcius,back time 04 Hours, complete all as specififed and direccted.
120
-
-
... More
M & L for replacement LED lamp 7 watt , 230 volts retrofit type complete all as spd and directed by Engr-in-chrage.
205
-
-
... More
M & L for replacement LED lamp 9 watt , 230 volts retrofit type complete all as spd and directed by Engr-in-chrage.
290
-
-
... More
M & L for replacement LED lamp 12 watt , 230 volts retrofit type complete all as spd and directed by Engr-in-chrage.
290
-
-
... More
S & F in replacement existing UNSV lights with wall mounted decorative bracket light with designer frosted glass globe 20Watt with prefixed lamp of 20 watt complete.
22
-
-
... More
Supply & Fix in replacement sheet metal enclosure 4 way with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).
8
-
-
... More
Supply & Fix in replacement sheet metal enclosure 8 way with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).
46
-
-
... More
S & F in replacement existing unsv distribution board iron clad, with double door 4 way with IP-54,1K-09 protection,cemet spill prptector suitable for MCCB as incommer AC 415 Volts three pole with thermal release adjustable type (80% to 100 % ) and MCB as outgoing ,complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 25 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).
8
-
-
... More
Supply and fix in replacement of RESIDUAL CURRENT BREAKER WITH OVERLOAD PROTECTION of 63 A rating with 300 m Amps sensitivity Double pole fixing in existing DB with suitable size ferrules/lugs complete all as specified and directed.
44
-
-
... More
Supply and fix in replacement of existing old u/s MCB SPN with MCB SPN C curve ,240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.
120
-
-
... More
M&L for Replacement of unserviceable MCCB 63 Amps current carrying capacity 16 KA , AC 415 Volts three pole complete all as specified and directed. including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.
5
-
-
... More
M&L for Replacement of unserviceable MCCB 100 Amps current carrying capacity 16 KA , AC 415 Volts three pole complete all as specified and directed. including dismentling the existing with all connections & fixing the new with all connections all as directed by Engg-in-charge.
5
-
-
... More
Supply and fix in replacement MCB single pole 240 volts any rating 6 to 32 amps, with rupturing capacity 10 KA, complete all as specified and as directed.
560
-
-
... More
Repair, maint and making the continuity of supply after rectifying the defects of the electrical items such as switches, replacement of fuse wires, distribution boards, MCB (light/power), lamp holders (bracket/ pandents/ batten), bell/buzzer, push button, ceiling rose, capacitors and other similar electrical items/fittings etc. including providioning of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length not exceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note :- (i) any accessories found unserviceable that shall be paid as supply only under respective items of this Sch 'A' . (ii) One job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable.(iii) The area for attending the complaints are Dhangu complex area (iii) Each complaint attended/rectified shall be measured as one job. (iv) The contractor shall depute necessary man power on daily basis for rectifying the jobs including sundays and holidays.
360
-
-
... More
Supply only switch piano polycarbonate body flush button single pole two way 5 amps, 230 volts.
44
-
-
... More
Supply only switch piano polycarbonate body type single pole one way 5/6 Amp, 230 volts.
550
-
-
... More
Supply only switch piano polycarbonate body type single pole one way 15 Amp, 230 volts.
130
-
-
... More
Supply only switch socket combination Polycarbonate body 2 in 1,3 pin, 5 Amp and 15 Amp flush type all as specified and directed.
130
-
-
... More
Supply only switch socket combination Polycarbonate body 5 pin, 5 Amp flush type all as specified and directed.
209
-
-
... More
Supply only socket outlet Polycarbonate body 2 in 1, 3 pin 15 Amp flush type all as specified and directed.
132
-
-
... More
Supply only socket outlet Polycarbonate body , 5 pin 5 Amp flush type all as specified and directed.
209
-
-
... More
Supply only bell push with bell push polycarbonate body type 5/6 Amp, 230 volts. '
130
-
-
... More
Supply only bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified.
130
-
-
... More
Supply only fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by engineer-in-charge.
195
-
-
... More
Supply only ceiling rose Polycarbonate body surface bakelite 2 to 3 terminals, 230 volts.
175
-
-
... More
Supply only lamp holder batten type polycarbonate body with back plate for batten fitting. Note for item No 146 to 157: The quoted rate inclusive for the following :-.(a) The material shall be ISI marked. In case of non-availability, the certificate for the same to be submitted (b) Test certificates to be submitted before commencement of work/ claiming for payment.(c) Warranty certificate for minimum 2 years to be submitted from OEM.
85
-
-
... More
Supply only capacitor AC 230 volts 2.5 mfd ISI marked complete all as spd and as directed.
95
-
-
... More
Supply only capacitor AC 230 volts 3.25 mfd ISI marked complete all as spd and as directed.
95
-
-
... More
Supply only capacitor AC 230 volts 4.0 mfd ISI marked complete all as spd and as directed.
22
-
-
... More
Supply only FRLS PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm , cut to size all as required at site.
950
-
-
... More
Supply only FRLS PVC insulated fire retardant stranded copper conductor cable of 2.5 sqmm , cut to size all as required at site.
950
-
-
... More
Supply only FRLS PVC insulated fire retardant stranded copper conductor cable of 4.0 sqmm , cut to size all as required at site.
520
-
-
... More
Supply only FRLS PVC insulated fire retardant stranded copper conductor cable of 6.0 sqmm , cut to size all as required at site.
360
-
-
... More
Supplying and fixing in replacement of old u/s service cable size 4 sqmm, twin core multistranded 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service with galvanised steel wire complete all as spd and directed.
360
-
-
... More
All as per srl item above here in above but for service cable of size 6 sqmm,complete all as spd and directed.
360
-
-
... More
All as per srl item above here in above but for service cable of size 10 sqmm,complete all as spd and directed.
360
-
-
... More
Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.
39
-
-
... More
S&F PVC tape of size 25 Mtrs long , 25 mm width and .125mm thickness complete all as specified and as directed.
150
-
-
... More
S&F PVC tape of size 20 Mtrs long , 25 mm width and .125mm thickness complete all as specified and as directed.
150
-
-
... More
Note for Srl item No.1 to 170: The work involves of various areas of AGE E/M (S) Pathankot. The Contractor shall depute manpower on daily basis round the clock for attending and rectifying the jobs in time. If any breakdowns/complaints simultaneously occured in any areas shall be attended simultaneously by deputing additional manpower/T&P for rectification of defects.The rate quoted deemed to be included for the same. Recovery for non attending of any type rectification/complaint/breakdowns shall be at the rate of Rs 2500 per day irrespective nature of complaint/defect.
-
-
-
... More
Sch of Credit = 148427.00
-
-
-
... More
Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements