Military Engineer Services Tender

S&F 30mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed.

Taking down chowkhat with shutters of size n.exc 1.5 Sqm (without taking off shutters from the frame) all as specified and directed

S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat, moulded wood grain printed both side PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beadinused for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to e fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. (Make - Rajshri Plastiwood Ltd, M/s Dura Plast Extraction PVt Ltd, M/sFenesta)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specifica-tion & drawing (Make - Rajshri Plastiwood Ltd, M/s Dura Plast Extraction PVt Ltd, M/sFenesta)

S&F ISI marked 150 mm size Aluminium anodised barrel tower bolts, of extruded section with bright bolts complete all as specified and as directed.

S&F ISI marked Aluminium anodised sliding door bolt 300 mm long with hast staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F ISI marked125 mm size Aluminium cast type anodised handles, of extruded section complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed in repair in steel frame or in wooden frame of door/ window with MS flat with screw or wooden beading where required and match the surface complete as specified and directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, welding, bolting or riveting, etc., conforming to Fe-410- W(Gde- E-250) complete all as specified and directed by Enge in charge.

Steel rolling shutters of 1.00 mm thickness of lath, without ball bearing, as specified including top cover, anchoring rod, spring as required, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manually type and fixed the clamp of shutter on wall surface and locking arrangement and making good in CM (1:3) or PCC 1:2:4 type B-1 fixed in repairs and making good the disturbed surface with cement plaster or cement concrete and match the surroung surface complete all as specified and directed by Engineer-in-charge. (Make - M/S Steelman Jalandhar, Prakash & Co, New Delhi and Dahiya Industries, Panchkula)

S&F Presed steel frames for doors Size of frame 125 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc including filling PCC 1:3:6 (type-C0) in the frames complete all as spd.complete as specified supplied and fixed. (Make - M/S Steelman Jalandhar, SK Steel Fabricators Ludhiana and Dahiya Industries, Panchkula)

S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hings, lock strike, plate etc complete of size 105x60mm all as spd including filling PCC 1:3:6 (type-C0) in the frames complete all as spd.complete as specified supplied and fixed. (Make - M/S Steelman Jalandhar, SK Steel Fabricators Ludhiana and Dahiya Industries, Panchkula)

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet of thickness 0.5mm thick in roofcovering/wall cladding, fixed withself tapping screws/fastners as per manufacturers instruction complete all as specified and directed by Engr -in-Charge. (Make - SAIL, TATA, Jindal)

M&L 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

M&L for 75 mm thick PCC type B-1 1:2:4 (Using 20mm graded stone aggregate as in floor finishing complete all as specified.

M&L for Providing and laying ISI marked 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by Engr-in-Charge. (Make - NTC, NITCO, Johnson)

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed.

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

M&L for two coat of first quality synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed by Engr-in-Charge. (Make -Asian Paints, Berger and Nerolac)

Preparation of old painted wooden surfacs of any description not otherwise described over 10 cm width or grith and applying two coat of first quality synthetic enamel paint complete all as specified and directed by Engr-in-Charge. (Make -Asian Paints, Berger and Nerolac)

M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed by Engr-in-Charge. (Make -Asian Paints, Berger and Nerolac)

Preparation of old painted steel surfacs of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. (Make -Asian Paints, Berger and Nerolac)

Demolition of stone slab and tiles of any description of any or thickness in floor laid in bedded and pointedin any mortar , aprons etc laid bedded and pointed in any mortar as specified and directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and Screed bed or bedding layer of 20mm thick in CM 1:4 for laying floor finish complete all as spcified and directed.

M&L for Coloured glazed ceramic colour tiles 350X250X 7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick cement plaster in (1:4) on vertical surfaces as dado/skirting, colour and pattern shall be approved by Engrs-In-Charge complete all as directed/specified. (Make - Orient Bell, Kajaria, Somany and NITICO)

M & L for non skid ceramic tiles light shade 7-8 mm thick (square/rectangular)polished,area of each tiles exc 0.11 but n. exc 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed

M &L Precast chequered cement concrete tiles 30cm x 30cm x 22 to 25 mm thick with grey ecment and pigment set, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 20 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar 1:4 on brick or concrete surfaces of walls external surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for Rendering 10mm thick in cement mortar 1:3 on brick or concrete surfaces of ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for Prepration of new plastered surfaces of walls, pillars, cornices and applying two coat oil bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.

M&L for Prepration of new plastered surfaces of ceiling and applying two coat of white wash including prepration of surface complete all as specified and direceted.

Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying two coat oil bound distemper on walls complete all as specified and direceted.

Sheet glass 3mm thick ordinary quality and glazing with oil putty in sqaures in n.exc 0.5 sqm in each panes including taking out of old broken glass ( any thickness,size,quality or description ) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed

S&F chain link MS galvanised fencing made of 3.98 to 4.00mm thick (08 Guage) galvanised wire and the length of side of mesh of 50 to 56.50mm (Gap) weight of chain link fence (exc 4 Kg/Sqm) complete fixed to the fencing posts as indicated or as directed by Engr-in Charge.

S&F in repair steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises of glazed & gauged skelton shutter (required no of gauged shutter and glazed shutters) including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (Four Nos of each window) including following fitting welded to frame shutter:- Ref Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (i) Hold fast,150mm long of MS flat iron 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (ISI Marked) (iii) MS Tower bolt 150mm long-02 Nos per leaf (ISI Marked) (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 and reference from Drg kept in office. (vii) M S guard bar 8mm square bars @75mm C/C fixed horizontlly. Note : Glass,wiremess and painting shall be measured and paid separately. (Make - M/S Steelman Jalandhar, RD Jalandhar, Steel Master Industires, Jalandhar, Shri Krishna and Dahiya Industries, Panchkula)

Material and labour for preparation of old/newly plastered surface and applying two coats of first quality Acrylic weather coat emulsion paint on walls/facias/roof top/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. (Make -Asian Paints, Berger and Nerolac) Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height.

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.