Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,25,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_679799_2Bid Award Id
ViewTender No
CWE BTD/TOKEN-17/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All as per serial item No. 3.00 here-in-before but except bricks .(old serviceable bricks shall be obtained from serial item no. 2.00 here-in-before of BoQ and reused after proper cleaning complete all as specified and directed by Engineer-in-Charge . Note : The rate of cleaning of retrived bricks is included in this item and nothing shall be paid extra on this account.
3
-
-
... More
Material and labour for Brick work with sub class ‘B’ burnt clay old size bricks, straight or curved on plan to any radius in half brick walls built in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
40
-
-
... More
Material and Labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge.
350
-
-
... More
Material and Labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge.
200
-
-
... More
Material and labour for preparation on new surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade @ 5.00 Sqm / per litre for two coats by using roller to external walls / RCC surfaces/soffits of chajjas / roof projections /cantilevers/ balcony etc surfaces over & including a coat of exterior emulsion primer @ 11.00 Sqm / per litre for one coat over and including acrylic wall care putty on external surfaces of walls / ceiling / soffits ( thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made acyrlic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc as recommended for under coat by manufacturer of exterior emulsion paint and exterior emulsion primer complete all as specified and as directed by Engineer-in- charge. Make of acrylic wall care Putty, exterior emulsion paint and exterior emulsion primer : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
350
-
-
... More
Material and labour for complete removal of existing treatment of any type / description from wall / RCC surfaces / ceiling / chajjas / roof projections etc with mechanical means / grinder and applying two coats of exterior emulsion paint (light shade) with highlighter of any approved shade @ 5.00 Sqm /per litre for two coats by using roller to external walls / RCC surfaces / soffits of chajjas / roof projections /cantilevers/ balcony etc. surfaces over & including one coat of exterior emulsion primer @ 11.00 Sqm / per litre for one coat over and including acrylic wall care putty on external surfaces of walls / ceiling / soffits ( thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made acyrlic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc as recommended for under coat by manufacturer of exterior emulsion paint ane exterior emulsion primer complete all as specified and as directed by Engineer-in- charge. Make of acrylic wall care Putty, exterior emulsion paint and exterior emulsion primer : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
1500
-
-
... More
Material and labour for preparation of new surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 Sqm / per litre for 2 coats by using roller/brush to walls surfaces with and including applying acrylic wall care putty on internal surfaces of walls / ceiling ( thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc over & including one coat of interior emulsion primer @ 10 Sqm/ per litre for one coat as recommended for under coat by manufacturer of interior emulsion paint and interior emulsion primer complete all as specified and as directed by Engineer-in- charge. Make of acrylic wall care Putty, interior emulsion paint and interior emulsion primer : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
200
-
-
... More
Material and labour for complete removal of existing treatment of any type / description from wall / RCC surfaces / ceiling / chajjas / roof projections etc with mechanical means / grinder and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any existing shade @ 10 Sqm / Per litre for two coats by using roller to external walls / RCC surfaces/soffits of chajjas / roof projections /cantilevers/ balcony etc surfaces over and including acrylic wall care putty on external surfaces of walls / ceiling / soffits ( thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc, over and including a coat of exterior emulsion primer @ 10.00 Sqm / Per litre for one coat as recommended for under coat by manufacturer of exterior emulsion paint and exterior emulsion primer complete all as specified and as directed by Engineer-in- charge. Make of acrylic wall care Putty, exterior emulsion paint and exterior emulsion primer : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
600
-
-
... More
Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and Fixing 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid decorative & moulded type flush door shutter with frame / Chowkhat of size 45mm x 85mm (shutter size 2mtr x0.70mtr approx with door frame length 4.80 mtr approx) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg / cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N / Sqmm, modules of elasticity 900 N /Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with stainless steel fancy type fittings ( of size 3 x hinges 100mm long, 2 x door handle 200mm long, 1 x tower bolt 200 mm long and x brass mortise lock 4 levers size 100 mm vertical type with handle, 1 x door stopper 150mm long) as approved by GE with necessary fixing arrangement of required size with necessary full body threaded star headed counter sunk S.S screws, including taking down of old chowkats or frame with shutter (without taking out shutter from the frame and iron/aluminium mongery) complete as specified by the manufacturer and as per directions of Engineer-in-charge.
23
-
-
... More
All as per item No 13.00 here-in-before but shutter size 2.00 mtr x 0.90mtr approx with door frame length 5.0 mtr approx) complete as specified by the manufacturer and as per directions of Engineer-in-charge.
5
-
-
... More
Supply and Fixing Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confrom-ing to Fe 290 (Gde - E-165) complete all as specified and as directed by Engineer-in-Charge
250
-
-
... More
Supply and Fixing in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in- charge.
15
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and Supply and Fixing 4mm thick Sheet glass, ordinary quality, in squares, exceeding 0.50 sqm in each pane including wooden beading fixed with nails complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and Supply and Fixing 4mm thick Figured glass pin head type , in squares, exceeding 0.50 sqm in each pane including wooden beading fixed with nails complete all as specified and as directed by Engineer-in- charge.
5
-
-
... More
Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .
Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.
(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly.
(iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill .
210
-
-
... More
Supply & fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as sepcified and directed.and by Engineer-in- charge.
40
-
-
... More
Supply & fixing 5mm thick Sheet galss, ordinary quality, in squares, exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Supply & fixing in repair Door closer hydraulically regulated,aluminium (die cast) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between
61 to 80 kg and fixed complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Material & Labour for 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, rounding off edges of glass for partition etc., including with handles, fixing and opening/locking arrangement etc, complete all as specified and directed by Engineer-in- charge.
45
-
-
... More
Material and Labour for vitrified (double charged / ultra charged) ceramic tiles, area of each tile exceeding 0.36 Sqm but not exceeding 1.44 Sqm, more than 8 mm thick (square), polished, shade and colour as approved by GE, in floors / wall / dado etc. set and jointed in neat cement slurry @ 3kg/ Sqm and pointed with epoxy grout matching with the colour of tiles, laid over and including 15 mm thick rendering/ Screed bed or bedding layer in CM (1:6) in white cement with pigments including using with spacer as per manufacturer's instructions including dismantling of stone / tiles / terrazzo finish of any description etc. and disposing the same as designated location upto distance of 2 to 2.5 Km within MoD land complete all as specified and as directed by Engineer-in- charge.
35
-
-
... More
Material and Labour for Glazed ceramic digital coloured tiles of size 300mmx 600mm x 7-8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) or adhesive as directed including using with spacer as per manufacturer's instructions, including using with spacer as per manufacturer's instructions including dismantling of stone / tiles / terrazzo finish of any description etc. and disposing the same as designated location upto distance of 2 to 2.5 Km within MoD land complete all as specified and as directed by Engineer-in- charge.
480
-
-
... More
Material and Labour for non skid ceramic coloured tiles (suitable for wet areas) of size 7 to 8 mm thick square or rectangular, area of each tile not exceeding 1.44 sqm, in floors etc. laid with approved high polymer modified , grey cement-based tile adhesive suitable for fixing medium format tile/ stone in walls/floor to match the shape as approved by GE/Engr-in-charge over and including 15 mm thick screed in cement mortar (1:4) iincluding using with spacer as per manufacturer's instructions including dismantling of stone / tiles / terrazzo finish of any description etc. and disposing the same as designated location upto distance of 2 to 2.5 Km within MoD land complete all as specified and as directed by Engineer-in- charge.
320
-
-
... More
Material and Labour for rendering 10 mm thick in cement mortar 1:4 on brick work or concrete surfaces , finishing the surface even & smooth without using extra cement with Liquid water proof compound complete all as specified and dricted by Engineer-in-charge.Note : Liquid water proof compound shall be measured and paid seperately under appropriate item of Schedule 'A' BoQ.
2050
-
-
... More
Material and Labour for vitrified tiles 8 mm thick area of each tile not exceeding 0.04 Sqm, pointed with epoxy grout matching with the colour of tiles, (grouting with Three Component, High Performance Epoxy Tile Grout, exceeds EN 13888 requirements), tested in accordance with AATCC 30 PART 3, in any position in swimming pool internal / external angles for wall, floor and corners to meet the World Aquatics / FINA criteria, as per approved shade by GE, laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477: 2019 Type 2T "Adhesives for use with Ceramic, Mosaic and Stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesive (C1) with slip resistance (T) of class C1T including using with spacer as per manufacturer's instructions including dismantling of stone / tiles / terrazzo finish of any description etc. and disposing the same as designated location upto distance of 2 to 2.5 Km within MoD land complete all as specified and as directed by Engineer-in- charge.
2050
-
-
... More
Material and Labour for first quality, scratch free, Max grip anti-slip vitrified tiles with safety marking area of each tile not exceeding 0.36 Sqm,10 mm thick for external use in floors / walls, as per approved shade/design by GE with and including 15 mm thick screed / Rendering in Cement Mortar 1:6 , laid with approved high polymer modified , grey cement-based tile adhesive suitable for fixing medium format tile/ stone in walls/floor mixed with pigment to match the shade of sub laid with manufacturer's instruction and authorised applicator including using with spacer as per manufacturer's instructions including dismantling of stone / tiles / terrazzo finish of any description etc. and disposing the same as designated location upto distance of 2 to 2.5 Km within MoD land complete all as specified and as directed by Engineer-in- charge.
1800
-
-
... More
Material and Labour for full vitrified tiles 12 mm thick (dark shade) area of each tile not exceeding 1.44 Sqm (bull edges), pointed with epoxy grout matching with the colour of tiles, (grouting with Three Component, High Performance Epoxy Tile Grout, in any position in kitchen platform and wall, floor and corners as per approved shade by GE, laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to national BIS, SP : 7 Adhesives for use with Ceramic, Mosaic and Stone Tiles”, fire-proof, non-combustible, high temperature materialand is a normal cementitious adhesive (C1) with slip resistance (T) of class C1T including using with spacer as per manufacturer's instructions including dismantling of stone / tiles / terrazzo finish of any description etc. and disposing the same as designated location upto distance of 2 to 2.5 Km within MoD land complete all as specified and as directed by Engineer-in- charge.
15
-
-
... More
Material and Labour for 18-20mm thick Granite (of any type) tiles machine cut, in skirting/ dado , laid over with and including 10mm thick rendering in cement mortar 1:3 , set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, incl dismantling of old stone slab of any description, complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and Fixing in repairs vitreous china wash down water closet pan wall hanging single piece (with flushing cistern EWC) 'P' trap, with and including white coloured closed pattern plastic seat cover, hand faucet and including mild steel chromium plated or aluminised hinging device as approved by GE, complete all as specified and as directed by Engineer-in- charge.
6
-
-
... More
Material and Labour in repairs Vitreous China Urinal, full stall type, white, including connections to flushing pipe and outgoing pipes , including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating, PVC bottle trap, as approved by GE including CP urinal spreader and CP connection etc complete all as specified and directed by Engineer-in- charge.
10
-
-
... More
Material and Labour in repairs oval type vitreous china wash basin, white, including 32mm chromium plated waste coupling, PVC bottle trap, 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe & fixing in granite slab complete all as specified and approved by GE / directed by Engr-in-Charge. Note: Granite slab shall be measured and paid separately.
12
-
-
... More
Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in- charge.
30
-
-
... More
Taking down or up steel tubing 15mm bore and connections and Supply and Fixing CPVC pipes SDR 11, outer dia of pipe 20mm including with fittings (such as elbow, Tee, socket etc) and fixed to walls & ceiling or laid in floors, and making good as per existing surfaces complete all as specified and as directed by Engineer-in- charge.
150
-
-
... More
Taking down or up steel tubing 20mm bore and connections and Supply and Fixing CPVC pipes SDR 11, outer dia of pipe 25mm including with fittings (such as elbow, Tee, socket etc) and fixed to walls & ceiling or laid in floors, and making good as per existing surfaces complete all as specified and as directed by Engineer-in- charge.
100
-
-
... More
Supply and fixing in replacement 15mm bore Stop valves,fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe /CPVC Pipe or for unions and fixed for iron pipe /CPVC Pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
54
-
-
... More
Supply and fixing in repair 15mm bore bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe /CPVC Pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
52
-
-
... More
Supply & fixing in repair chromium plated square shower rose 200mm x 200mm size, with or without swivel joints, any size, including fixing to iron pipe /CPVC Pipe, fittings or union for 15mm bore of pipe complete all as specified and as directed by Engineer-in-charge.
22
-
-
... More
Supply & fixing in repair rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection with and including Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in-charge.
4
-
-
... More
Supply & fixing in repairs 100mm dia Chromium Plated grating with or without hinge type or hole type complete all as specified and directed by Engineer-in-charge.
16
-
-
... More
Supply and fixing in replacement bevelled edge mirror selected quality 5mm thick glass mounted and fixed to with chromium plated brass screws and cup washers, complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and fixing CP brass fancy type Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc. complete all as specified and as directed by Engineer-in- charge.
5
-
-
... More
Supply and fixing peg set / coat hooks made of stainless steel complete all as specified and as directed by Engineer-in- charge.
50
-
-
... More
Supply and fixing in repairs chromium plated brass towel rail, 20mm dia, D type, 60cm long fixed to wall complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and fixing Brass chromium plated towel rack 600mm long without lower hangers but with 3 hooks, complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Supply and fixing chromium plated towel ring complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and Fixing in repair 110 mm bore of pipe PVC (SWR) type B pipes single socket 6 Kg/Sq cm in any length including neceesary fittings such as elbow, bends, Y-Junction, etc.as required at site with Stack clamps made out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge.
42
-
-
... More
Supply and Fixing in repair 75 mm bore of pipe PVC (SWR) type B pipes single socket 6 Kg/Sq cm in any length including neceesary fittings such as elbow, bends, Y-Junction, etc.as required at site with Stack clamps made out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge.
27
-
-
... More
Supply and Fixing in repair 75mm dia of long neck PVC SWR floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1, using 20mm graded stone aggregates complete complete all as specified and as directed by Engineer-in-charge.
8
-
-
... More
Supply & fixing 18mm thick HDHMR board UV coating, exterior grade, including acrylic high gloss sheet of 2mm thick over HDHMR board, anti fungal, moisture resistance, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc including necessary stainless steel fitting arrangements (such as handles, hinges ball catcher etc.) and dismantling of existing board of any description. complete all as specified and directed by Engr-in-charge. NOTE:- Sample shall be approved by GE .
32
-
-
... More
Material and Labour for 75 mm thick PCC 1:3:6 , Type C-1 using 20 mm graded stone aggregate as in plinth protection, finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
150
-
-
... More
Material and labour for 100 mm thick cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
150
-
-
... More
Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like and in chajja etc complete all as specified and as directed by Engineer-in-charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
8
-
-
... More
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
250
-
-
... More
Material and labour for mild steel TMT bars 6mm dia to 8mm cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
1600
-
-
... More
Material and labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
40
-
-
... More
Material & Labour for providing and fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and as directed by Engineer -in-charge.
450
-
-
... More
Supply and Fixing Diving board 4.8 metre long FRP laminated with 99.7% water resistant polyester resin compositely reinforced with csm-450 chopped glass strand mat, thickness 50 to 65 mm, width 500mm ( Diving Board / Flexible spring board shall be anti-slip surface covering entire length of board with the addition of water replant , maximum safety, including stainless steel fulcrum with necessary fixing arrangements. (Aisi 304 stainless steel countersunk screw etc.) as directed by manufacturer. The board shall have highly resistant gel coated surface which remains flexible even after UV exposure and adverse weather condition all as per manufacturer's complete all as directed by Engineer-in- charge. Note: Diving board shall be approved by GE. Note: The diving board shall be approved by GE.
5
-
-
... More
Material and Labour preparation of steel surfaces and applying two coats of synthetic enamel paint of any description not otherwise described over 10 cm width or girth and complete all as specified and as directed by Engineer-in-charge.
120
-
-
... More
Material and Labour for preparation of new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying with two coats of synthetic enamel paint over with and including a coat of pink primer complete all as specified and as directed by Engineer-in-charge.
100
-
-
... More
Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint of approved tint/colour complete as specified and as directed by Engineer-in-Charge.
80
-
-
... More
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint of approved tint/colour complete as specified and as directed by Engineer-in-Charge.
102
-
-
... More
Material and labour for 40mm thick cement concrete 1:2:4, Type-B-1 , using 20 mm graded stone aggregates as in floors and finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specified and directed by Engineer-in-Charge.
240
-
-
... More
Material and labour for rubber moulded chequered cement concrete tiles (size 30cm x 30cm x 25mm thick) with grey cement and colour pigment any shape, size, colour / pattern (as approved), set and jointed in neat cement slurry @ 3.00 Kg / Per Sqm with and including 15 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
100
-
-
... More
Supply and fixing in replacement stainless steel chromium plated pipe 20mm dia, wall thickness of pipe not less than 20 guage, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. complete all as specified & directed by Engineer-in- charge.
80
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in- charge.
3
-
-
... More
Material and labour for rendering/plastering 10mm thick in cement mortar (1:3) on any face of ceiling, finished fair and even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
70
-
-
... More
Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.
70
-
-
... More
Dismantling of Shower closer and deposite in store and refix in same position complete all as specified and as directed by Engineer-in- charge.
16
-
-
... More
Blank
-
-
-
... More
Material and labour for cement slurry @ 1.2 kg /sqm spreading with bristle brush and rendering 15 mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid water proof compound shall be measured and paid separately.
685
-
-
... More
Material and labour for roof treatment:-
(a) Removal of any type of existing roof treatment such as brick tiles,mud phuska, APP membran in any number of layer up to orignal RCC roof top slab surface (b) Clean the roof:- Clean the roof: preparation of surface by scrapping and properly cleaning the existing surface by removing loose / uneven particles with wire brushes and other tools, complete in all respect as directed by Engineer-in-charge. (c) Material and labour for applying of liquid water proofing treatment to RCC roof slab described as under: (i) Apply first coat of Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with having minimum elongation of 350%, tensile strength 2.9 MPa and shall have crack bridging ability upto 2.5 mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33% dilution as priming coat.
(ii) Laying of fiber mesh of 0.3mm thickness weave in leno pattern having weight 45 gm/Sqm and pasting it properly with overlap of 50mm and allow it to dry.
(iii) Apply second of undiluted coat @ 0.450ltr/sqm. (iv) Apply third and final coat undiluted @ 0.450 ltr/Sqm as directed by Engr-in-Charge.
(d) Ponding Test:- Ponding test shall be done after application of material.
Notes :-
(a) Application of water proofing treatment will be done by Authorised Applicator only/or in presence of auth rep as approved by GE . Certificate in this regard shall be submitted to Engr-in-Charge.
(b) Shifting/removing of any wire/cable/AC unit or other any object as per site requirement and re-fixing the same if needed is deemed to be included in the rate quoted by the contractor. (c) Total removal of vegetation/creepers//small plants/roots from the top of the bldgs to facilitate the work of treatment is also deemed to be included in the rate of contractor.
685
-
-
... More
Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specified and as directed by Engineer-in- charge.
300
-
-
... More
Material and labour for Making benching with PCC (1:2:4) type B-0 using 12.5mm graded stone aggregates along side wall adjoining to roof in concave shape complete all as specified and as directed by Engineer-in- charge.
2
-
-
... More
Material & Labour for provn of APEO free elastomeric heat reflective cool roof coating with UV cross lined polymer technology. The membrane shall be laid as per the methodology suggested by the manufacturer and shall include the followings:- (i) Surface preparation - All loose existing coatings, heavy dust, debris and fresh roof cement must be removed. (ii) Surface hairline cracks upto 5mm must be filled with PU sealant and in case cracks are wider than 5mm should be repaired with using polymer modified mortar. (iii) Application of cool roof coating reinforced with 40 to 50 GSM polyester fabric mesh or non-woven Geotextile fleece fabric/ seam tape sandwich between coats of cool roof coating. (iv) Application of two top coats of cool roof coating on the well prepared surface at the rate of 2.2-2.4 sq.mt/litre/coat , without water dilution to achieve combine DFT of 450-500 microns.
585
-
-
... More
Material and labour for 80 mm thick machine pressed rubber moulded precast concrete interlocking tiles with grey cement and pigment any shape, size, colour/pattern(as approved) confirming to IS 15658-2006 of M-40 Grade and of ISI marked (as approved) complete all as specified
100
-
-
... More
Material and labour for Cement Concrete 1:4:8 , Type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
11
-
-
... More
Supply & fixing precast M-30 grade RCC drain including with drain cover slab complete all as specified and directed by Engr-in-Charge. Note: Note:1 Design and shape shall be approved by GE.
18
-
-
... More
Material and Labour for Hard core using broken stone aggregate of gauge not exc. 63mm, deposited spread and leveled in layers not exc. 63 mm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Material and Labour for Rebuilding the section of damaged RCC elements to its original size in thickness of 100mm by providing and casting with ready to use non shrink. Cementitious free flow micro-concrete , having compressive strength 60 N/Sqmm (28 days) according to ASTM C 1107-99 including providing and fixing of water tight foam faced finish shuttering of minimum 18mm thickness and supporting formwork, all lead fit, mixing, placing, de-shuttering, levelling the surface by grinding off cementitious slurry or cementitious joints differences if any for satisfaction of Engr-in-charge and curing thereof including all required scaffolding/ladders complete all as specified.
4000
-
-
... More
Material and Labour for Making 'V' groove of 5mm wide and 5mm deep over crack line by electrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower and Sealing of exposed 'V' groove of 5mm deep and 5mm wide with solvent-free, moisture tolerant thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40°C, according to ASTM C 881-78, Type I, Grade 3, Class B+C, compressive strength 60 N/mm2 (14 days) according to ASTM C 881 : bond strength 10 N/mm² (7 days) according to ASTM C 882 including all required scaffolding/ladders complete all as specified..
550
-
-
... More
Material and Labour for Drilling holes of 12mm die upto 100 mm deep holes in structural members at the interval of 300mm in staggered manner or along the crack line in reinforced concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm die NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix it inside the hole by applying thixotropic cementitious to ensure complete sealing and allow to cure the system for minimum of 8 hrs before Grouting including nozzle projections, excess putty, if any, over concrete element remove by gridding , levelling and finishing the external surface after completion of the work etc. including all required scaffolding/ ladders, formwork if required as per site requirement complete all as specified and as directed by Engineer-in- charge.
438
-
-
... More
Material and Labour for Grouting injecting two part, low viscosity, moisture insensitive injection- liquid, based on high strength epoxy resin , by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having mixed density 1.1 kg/ltr (at + 27ºC) : Viscosity -250 m Pass at + 30ºC and should comply according to ASTM C 881 Type II and IV , Grade-I , class E+F and should have below properties; Compressive strength = 70 N/Sqmm (7 days) according to ASTM C 579 : Tensile strength -50N / Sqmm after 7 days at +30ºC cure) according to ASTM D 638 : Tensile module- 2000N / Sqmm after 7 days at +30ºC cure) according to ASTM D 638, Bond strength -10.8N / Sqmm (failure in concrete ) after 14 days at +30ºC cure) according to ASTM D 638 : Bond strength : Flexural strength -50 N / Sqmm according to ISO 178. Seal with nozzle with thixotropic epoxy putty after the refusal of grout material from the nozzle. Note :- Leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost including all required scaffolding/ ladders complete all as specified and as directed by Engineer-in- charge.
120
-
-
... More
Blank
-
-
-
... More
Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth for foundation etc or for shafts , wells, cesspits, manholes , septic tank, for laying of cables , laying of pipes not exceeding 10 Sqm on plan and not exc 1.5 meter depth and getting out in soft/loose soil etc complete all as specified and as directed by Engineer-in- charge.
903
-
-
... More
Returning filling in any type of soil, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm in each layer, complete all as specified & directed.
1525.3
-
-
... More
Removing excavated material as in all kind of Soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed.
92
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in chargel compete all as specified and as directed by Engineer-in-charge.
198
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 1.5m and up to 3.0 m , as directed by Engineer-in charge complete all as specified and as directed by Engineer-in-charge.
189.01
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 3.0m and up to 4.5 m , as directed by Engineer-in charge complete all as specified and as directed by Engineer-in-charge.
150.73
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 4.5m and up to 6.0 m , as directed by Engineer-in charge complete all as specified and as directed by Engineer-in-charge.
110.24
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift above 6.0m and up to 7.50 m , as directed by Engineer-in charge complete all as specified and as directed by Engineer-in-charge.
69.75
-
-
... More
Removing excavated material (soils) away from site distance exceeding 1.5 KM but not exceeding 5.00 KM and deposting where as directed by Engineer-in-charge.
3.42
-
-
... More
Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas ( as basements etc.) and including use and waste of raking shores not exceeding 1.5m deep from starting point and fixing and removal complete all as specified and as directed by Engineer -in-charge.
129
-
-
... More
Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas ( as basements etc.) and including use and waste of raking shores exceeding 1.5m and not exceeding 3.0 m deep and fixing and removal complete all as specified and as directed by Engineer -in-charge.
97.55
-
-
... More
Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas ( as basements etc.) and including use and waste of raking shores exceeding 3.0 m and not exceeding 5.0 m deep and fixing and removal complete all as specified and as directed by Engineer -in-charge.
61.38
-
-
... More
Material and Labour for Use and waste of timbering as planking and strutting for excavations over areas ( as basements etc.) and including use and waste of raking shores exceeding 5.0 m and not exceeding 8.0 m deep and fixing and removal complete all as specified and as directed by Engineer -in-charge.
36.81
-
-
... More
Demolition of Cement Concrete (un-reinforced) in floors / pavings not exceeding 15 cm thickness (below or above ground level) and including removing of demolished material away from site distance exceeding 1.5 KM but not exceeding 5.00 KM and deposting where as directed by Engineer-in-charge.
31.09
-
-
... More
Material & Labour for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in surface channels , drains and thrust blocks complete all as specified and as directed by Engineer-in-charge.
17.4
-
-
... More
Material & Labour for PCC 1:3:6 type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
7.69
-
-
... More
Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing of demolished material away from site distance exceeding 1.5 KM but not exceeding 5.00 KM and deposting where as directed by Engineer-in-charge.. Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
23.94
-
-
... More
Material and labour for RCC M-30 (Design mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by the Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
7.8
-
-
... More
Material and labour for RCC M-30 (Design mix) using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in-charge. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
3.74
-
-
... More
Material and labour for RCC M-30 (Design mix) using 20 mm graded stone aggregates as in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttressescomplete all as specified and directed by the Engineer-in-Charge. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
6.5
-
-
... More
Material and labour for RCC M-30 (Design mix) using 20 mm graded stone aggregates as in chajjas complete all as specified and as directed by Engineer-in-charge. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
2.9
-
-
... More
Material and labour for CRS (Fe 500D) Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc. cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips directed by Engineer-in-charge.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
455
-
-
... More
Material and labour for CRS (Fe 500D) mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
995
-
-
... More
Material and Labour for Formwork of sides of concrete foundations, Footings, Bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished curved surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
9.53
-
-
... More
Material and labour for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter on rough finished curved surfaces of concrete complete all as specified and as directed by Engineer -in-charge.
46.98
-
-
... More
Material and labour for Formwork to chullah hoods, chajjas, troughs and similar items including edges on rough finished curved surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
12.43
-
-
... More
Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions on rough finished surface of concrete of circular on plan complete all as specified and as directed by Engineer-in-charge.
28.27
-
-
... More
Material and labour for 15mm thick rendering in CM (1:4) even and rough cast on straight / curved concrete surfaces , finished even and rough cast without using extra cement mixed with Liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed by Engineer-in-charge. Note :- Liquid Water Proof Compound shall be measured and paid separately.
150
-
-
... More
Material and Labour for two coats of epoxy paint as approved by GE on newly plastered surface including rubbing and cleaning, complete all as specified and as directed by Engineer-in-charge.
150
-
-
... More
Supply only liquid water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-charge.
343
-
-
... More
Taking out from trench existing old unservicable rusted / corroded CI pipe of size 300 mm bore spigot and socketed ends ( including all fittings) including balling out dirty / muddy water if necessary complete all as specified and as directed by Engineer-in-charge. Note :- 1.Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ . 2. The rate of balling out dirty / muddy water is included in this item and nothing shall be paid extra on this account.
220
-
-
... More
Taking out from trench existing old unservicable rusted / corroded CI pipe of size 250 mm bore spigot and socketed ends ( including all fittings) including balling out dirty / muddy water if necessary complete all as specified and as directed by Engineer-in-charge.Note :- 1.Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ . 2. The rate of balling out dirty / muddy water is included in this item and nothing shall be paid extra on this account.
132
-
-
... More
Taking out from trench existing old unservicable rusted / corroded CI pipe of size 200 mm bore spigot and socketed ends (including all fittings) including balling out dirty / muddy water if necessary complete all as specified and as directed by Engineer-in-charge.Note :- 1.Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ . 2. The rate of balling out dirty / muddy water is included in this item and nothing shall be paid extra on this account.
195
-
-
... More
Taking out from trench existing old unservicable rusted / corroded CI pipe of size 150 mm bore spigot and socketed ends ( including all fittings) including balling out dirty / muddy water if necessary complete all as specified and as directed by Engineer-in-charge.Note :- 1.Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ . 2. The rate of balling out dirty / muddy water is included in this item and nothing shall be paid extra on this account.
30
-
-
... More
Taking out from trench existing old unservicable rusted / corroded CI pipe of size 100 mm bore spigot and socketed ends ( including all fittings) including balling out dirty / muddy water if necessary complete all as specified and as directed by Engineer-in-charge.
Note :- 1.Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ . 2. The rate of balling out dirty / muddy water is included in this item and nothing shall be paid extra on this account.
30
-
-
... More
Taking out from trench existing old unservicable PVC pipe of size 125 mm bore including all fittings and joints at a basement of Swimming Pool in horizontally and vertically laid in structure including balling out dirty / muddy water if necessary complete all as specified and as directed by Engineer-in-charge.
Note :- 1.Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ. 2. The rate of balling out dirty / muddy water is included in this item and nothing shall be paid extra on this account.
80
-
-
... More
Taking out from trenchs / from under roads existing old unservicable rusted / corroded GI pipe and connections of size 40/50 mm bore including all fittings all as specified and as directed by Engineer-in-charge. Note :- Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ.
50
-
-
... More
Taking out from trenchs / from under roads existing old unservicable rusted / corroded GI pipe and connections of size 25 mm bore including all fittings all as specified and as directed by Engineer-in-charge.Note :- Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ.
50
-
-
... More
Taking out from trenchs / from under roads existing old unservicable rusted / corroded GI pipe and connections of size 20 mm bore including all fittings all as specified and as directed by Engineer-in-charge.
Note :- Excavation and earth work shall be measured & paid separately under respective items of schedule 'A' BoQ.
150
-
-
... More
Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket centrifugally cast(spun) class " K-9" with flanged ended conforming to IS-8329 -2000 in any length of size 300mm bore laid in trenches complete all as specified and as directed by Engineer-in-charge.
Notes :- (1) DI fittings and earth work shall be measured & paid for separately under respective items of schedule of works. (2) The rates of rubber gasket is included in this item and nothing shall be extra paid .
220
-
-
... More
Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket flanged ended centrifugally cast(spun) class " K-9" conforming to IS-8329 -2000 in any length of size 250mm bore laid in trenches complete all as specified and as directed by Engineer-in-charge. Notes :- (1) DI fittings and earth work shall be measured & paid for separately under respective items of schedule of works. (2) The rates of rubber gasket is included in this item and nothing shall be extra paid .
132
-
-
... More
Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket centrifugally cast(spun) class " K-9" with flanged ended conforming to IS-8329 -2000 in any length of size 200mm bore laid in trenches complete all as specified and as directed by Engineer-in-charge.
Notes :- (1) DI fittings and earth work shall be measured & paid for separately under respective items of schedule of works. (2) The rates of rubber gasket is included in this item and nothing shall be extra paid .
195
-
-
... More
Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket centrifugally cast(spun) class " K-9" with flanged ended conforming to IS-8329 -2000 in any length of size 150mm bore laid in trenches complete all as specified and as directed by Engineer-in-charge.
Notes :- (1) DI fittings and earth work shall be measured & paid for separately under respective items of schedule of works. (2) The rates of rubber gasket is included in this item and nothing shall be extra paid .
30
-
-
... More
Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket centrifugally cast(spun) class " K-9" with flanged ended conforming to IS-8329 -2000 in any length of size 100mm bore laid in trenches complete all as specified and as directed by Engineer-in-charge.
Notes :- (1) DI fittings and earth work shall be measured & paid for separately under respective items of schedule of works. (2) The rates of rubber gasket is included in this item and nothing shall be extra paid .
30
-
-
... More
Supplying, Laying, jointing and testing of Steel water tubing 50 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and as directed by Engineer-in-charge. Note (i) The rate of new GI fittings is included in this item and nothing shall be paid extra on this account.
(ii) Excavation and earth work shall be measured & paid separately under respective items of schedule'A' BoQ.
50
-
-
... More
Supplying, Laying, jointing and testing of Steel water tubing 25 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and as directed by Engineer-in-charge. Note (i) The rate of new GI fittings is included in this item and nothing shall be paid extra on this account.
(ii) Excavation and earth work shall be measured & paid separately under respective items of schedule'A' BoQ.
50
-
-
... More
Supplying, Laying, jointing and testing of Steel water tubing 20 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and as directed by Engineer-in-charge. Note (i) The rate of new GI fittings is included in this item and nothing shall be paid extra on this account.
(ii) Excavation and earth work shall be measured & paid separately under respective items of schedule'A' BoQ.
150
-
-
... More
Supplying, Laying, jointing and testing of uPVC aquasafe pipe with outer dia 125mm conforming to is-4985-2000 with working pressure 10 Kg/sqcm including uPVC caps required at certain intervals for swimming pool expoxure pipe complete all as specified and as directed by Engineer-in-charge.
80
-
-
... More
Supply and fixing in replacement 300mm dia sluice valve, ISI marked PN 1.6 confirming to IS-14846-2000, both end flanged, drilled, steel spindle and iron wheel handle, CI gate with MS ring complete including jointing material such as nuts, bolts, washers and rubber sheet etc. complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply and fixing in replacement 250mm dia sluice valve, ISI marked PN 1.6 confirming to IS-14846-2000, both end flanged, drilled, steel spindle and iron wheel handle, CI gate with MS ring complete including jointing material such as nuts, bolts, washers and rubber sheet etc. complete all as specified and as directed by Engineer-in-charge.
3
-
-
... More
Supply and fixing in replacement 200mm dia sluice valve, ISI marked PN 1.6 confirming to IS-14846-2000, both end flanged, drilled, steel spindle and iron wheel handle, CI gate with MS ring complete including jointing material such as nuts, bolts, washers and rubber sheet etc. complete all as specified and as directed by Engineer-in-charge.
3
-
-
... More
Supply and fixing in replacement 150mm dia sluice valve , ISI marked PN 1.6 confirming to IS-14846-2000, both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring complete including jointing material such as nuts, bolts, washers and rubber sheet etc. complete all as specified and as directed by Engineer-in-charge.
7
-
-
... More
Supply and fixing in replacement 100mm dia sluice valve , ISI marked PN 1.6 confirming to IS-14846-2000, both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring complete including jointing material such as nuts, bolts, washers and rubber sheet etc. complete all as specified and as directed by Engineer-in-charge.
4
-
-
... More
Supply and Fixing in replacement Gun metal globe or gate valve size of 50 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conform to IS 778 - 1984 complete all as specified and as directed by Engineer-in-charge.
2
-
-
... More
Supply and Fixing in replacement Gun metal globe or gate valve size of 25 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conform to IS 778 - 1984 complete all as specified and as directed by Engineer-in-charge.
7
-
-
... More
Supply and Fixing in replacement Gun metal globe or gate valve size of 20 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conform to IS 778 - 1984 complete all as specified and as directed by Engineer-in-charge.
12
-
-
... More
Supply and fixing DI / CI special fittings 100mm to 300mm dia (any type, radius and angle) like collar, bends, tee, tail piece caps and pugs, single branch ‘Y’ junction, double branch, cross, spigot & socket or taper and flanged, straight bend, increasing decreasing or double socket, reducer etc. all as per requires at site complete all as specified and as directed by Engineer-in-charge. Note : The weight of DI / CI special fittings shall be ascertained through BOO as ordered by GE. The payment shall be made as per actual weight of DI / CI special fittings as ascertained by BOO.The BOO duly countersigned by GE shall be enclosed with RAR & Final Bill and after that payment shall be made to the contractor.
3500
-
-
... More
Demolition of old valve pit and Material and Labour Construction of valve pit Type 'B' of size 120 cm x 120 cm x 120 cm ( internal dimension ) of brick masonry laid with cement mortar (1:4). from the top of surface including cover of MS sheet 3.15 mm thick and angle iron 50mm x 50mm x 6mm with hinges, handle and locking arrangement including painting with two coat of synthetic enamelled paint over a coat of red oxide and grouting to PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregates , Rendering 15mm thick in cement mortar 1:3, including three coats of white wash on internal surfaces and external exposed surfaces , foundation concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates including necessary earthwork , returning filling , removal complete all as specified and shown on drawings.Note : Applicable drawing for valve pit is Drawing No. BTD-811 sheet 1/2 to 2/2
1
-
-
... More
Blank
-
-
-
... More
Supply, fabricating, installation, testing, commissioning and electrically connecting LT panel board (outdoor type) dust and vermin proof for out door type made out of CRCA sheet 3.15 mm thick with aluminum bus bar of 250 Amps capacity and angle iron size of 50mm x 50mm x 5mm. Panel should be covered from all side with front and back with locable door and hinges complete duly exoxy powder coated, grouted in and including PCC 1:3:6 Type C-1 , using 20mm graded stone aggregarted , including supply and fixingall connections/control wiring incoming/outgoing with suitable size of PVC insulated copper conductor cable comprising of following accessories and testing complete all as directed :-
(a) MCCB 250Amp, 4 pole, 415 Volts of breaking capacity not less than 25KA - 01 No. (as Incomer)
(b) MCCB 100 Amps - 04 Nos. (for pump sets) (03 working + 01 spare).
(c) Housing for Star delta starter suitable for 25 HP pumpset & starters - 04 Nos ( 03 running + 01 spare)
(d) Digital ampere meter including CTs - 01 No. (e) Voltmeter - 01 No.
(f) Indicating lamps -03 Nos. (RYB) including ON/OFF buttons (g) Single phase preventer-03 Nos.
1
-
-
... More
Supply & Fixing of angle iron base frame for all pumping set including embedding in concrete and screwing etc. including cutting tops to shape as directed bent to shape, drilling holes, notching for wire etc, including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 and including two coats of syntehtic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed by Engineer-in-charge.Note :- (i) Weight of angle iron base frame shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of angle iron base frame .(ii) During the weighing of angle iron base frame the weight of two coats of syntehtic enamel paint shall not be considered for weight but the rate of material and labour for providing two coats of syntehtic enamel paint over a coat of red oxide zinc chromate primer is included in this item and nothing shall be paid extra on this account. The board shall be duly countersigned by GE shall enclosed with Final Bill (iii) Concrete work shall be measured and paid seperately under appropriate item of Schedule 'A' BoQ.
300
-
-
... More
Supply and fixing in repair Suction Sweeper assembly made out of MS sheet of size ( Length x Breadth x Height = 3.50 feet x 1.00 feet x 1.00 feet including plastic bristles (brush) for cleaning of floor of swimming pool and inlet GI medium grade pipe of 40 mm bore approximate 6 inch long for dewatering duly welded and other end threaded on suction sweeper assembly along with plastic wheels and two movable hinges for lifting the assembly during operation including 3HP pump suitable for suctioning of water from bottom of swimming pool complete all as specified and directed by Engineer-in-charge.
2
-
-
... More
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no. 151.00,152.00,153.00,154.00,155.00 & 156.00 of BoQ.
135
-
-
... More
Material and labour for Point wiring for open surface using approved colour coding as per IS (Red, Black and Green for single phase circuits), in PVC conduit complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through with and including PVC rigid conduit 20mm dia ( heavy duty ) ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable length and 1.2mm thick ) and flush fixed with cement mortar 1:4 , 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for for light / fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc with and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge .Note : (i) switches & fan regulator shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. (iii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips as directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account.
28
-
-
... More
Material and Labour for Concealed point wiring modular type fitting using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) 20mm bore surface on wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories for one light / fan / call bell /exhaust fan point controlled by one 5/6 Amps switch and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge.
Note for serial item no.126.00 to 130.00 : The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ. (ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account.
88
-
-
... More
All as item No 152.00 here -in- before but for one socket outlet 5 pin 5/6 Amps 250 volts flush type on same board complete all as specified and as directed by Engineer-in- charge.
5
-
-
... More
All as item No 152.00 here -in -before but for one socket outlet 5 pin 5/6 Amps 250 volts on Independent board complete all as specified and as directed by Engineer-in- charge.
12
-
-
... More
All as item No 152.00 here -in -before but for one bell point controlled by one bell Push complete all as specified and as directed by Engineer-in- charge.
1
-
-
... More
All as item No 152.00 here -in -before but for one socket outlet 6 pin, 6/16 Amps 2 in 1 with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on the independent board but not below the switch board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc complete all as specified and as directed by Engineer-in- charge.
2
-
-
... More
Supply and Fixing switch piano flush type 5/6 Amp, ISI marked 230V AC, single pole, one way complete all as specified and as directed by Engineer-in- charge
28
-
-
... More
Supply & Fixing Modular switch one way 6A, 1 module, complete all as specified and as directed by Engineer-in-charge.
105
-
-
... More
Supply and fixing Modular Socket Outlet , Multipurpose,3 Pin, 6 Amp , 2 Module , ISI Marked complete all as specified and directed by Engineer-in-charge.
17
-
-
... More
Supply and fixing Modular Switch one way 16 Amp 240 Volt, AC ,1 Module , ISI Marked complete all as specified and directed by Engineer-in-charge.
2
-
-
... More
Supply and fixing Modular Socket outlet , multipurpose, 2/3 Pin, 6/ 16 Amp 2 Module , ISI Marked complete all as specified and directed by Engineer-in-charge.
2
-
-
... More
Supply and fixing modular type Fan step regulator, 120W - 2 module complete all as specified and directed by Engineer-in-charge.
4
-
-
... More
Supply and Fixing Modular Bell push switch 6A 1 module ISI Marked complete all as specified and as directed by Engineer-in- charge.
1
-
-
... More
Supply and Fixing ceiling rose surface bakelite 65 mm x 50 mm with three terminal complete all as specified and as directed by Engineer-in- charge.
63
-
-
... More
Supply and Fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection with and including connection with copper cable of suitable size from ceiling rose to fitting complete all as manufacturer's instructions ,as specified and as directed by Engineer-in-charge.
19
-
-
... More
Supply and fixing REGAL Batten for LED tube with single LED Lamp 1 x 20 Watt, Ultra bright glass LED Tube light with very high efficacy suited for installation in T5 /T8 fitting with lamp holders etc. complete all with all accessories internally pre-wired complete all as per manufacturers instructions and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-charge.
53
-
-
... More
Supply and fixing LED flood light 150 watt with pressure diecast housing and toughened glass and individual LEDs with secondary lens optics with IP 66 ingress protection 4 kv in built and 10 KV external surge protection. Efiicacy 120 lm/w complete all as per manufacturers instructions complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
Supply and fixing Automatic Bell management system with multipurpose timer and ringer designed for schools / public places / swiming pools having separate programming and customizable settings for hassle free programming and scheduling complete all as per manufacturer's instructions and as directed by Engineer - incharge.
1
-
-
... More
Supply and Fixing Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick, IP-43 protection, flush mounted for metal door, powder coated DB V TPN 8 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
2
-
-
... More
Supply and Fixing Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,IP-43 protection , double door, powder coated DB SPN 12 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
1
-
-
... More
Supply & Fixing MCB ,TPN ,63 Ams 10 KA , 415 VOLT , 'C' Curve including connection with suitable size copper lugs complete all as specified and directed by Engineer-in- charge.
1
-
-
... More
Supply & Fixing MCB , SPN 40- 63 Ams 10 KA , 240 VOLT , 'C' Curve including connection with suitable size copper lugs complete all as specified and directed by Engineer-in- charge. e.
5
-
-
... More
Supply & Fixing MCB , SP 6 to 32 Amps 10 KA , 240 VOLT 'B' Curve including connection with suitable size copper lugs complete all as specified and directed by Engineer-in- charge.
20
-
-
... More
Supply and Fixing MCCB 4 pole of rating 125 Amp, Icu -100% 25 KA, thermal magnetic based complete all as specified and as directed by Engineer-in- charge.
2
-
-
... More
Material and Labour for Sub main wiring concealed PVC conduit with two single core of size 1.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including one single core of size 1.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 1.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length.
152
-
-
... More
Material and Labour for Sub main wiring with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .
Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.
50
-
-
... More
Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
2
-
-
... More
Taking down ceiling fan/exhaust fan and dismantiling the fan blades and shifted the fan and fan blades to store as directed by Engineer-in-charge
28
-
-
... More
Material and Labour for painting of ceiling fan/exhaust fan and fan blades complete with synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. with entire satisfication of Engineer-in-charge complete all as specified and as directed by Engineer-in-charge.
28
-
-
... More
Material and Labour for Rewining the burnt ceiling fan / Exhaust fan motor with copper binding wire of existing size/ gauge complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
Supply and fixing capacitor of suitable mfd for ceiling fan / Exhaust fan complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
Hanging only ceiling fan and connecting up including provision of cable of suitable size from ceiling rose or connector to fan complete all as specified and as directed by Engineer-in-charge.
28
-
-
... More
Supply and fixing Underwater swimming pool light wall/ceiling/surface mounted LED 12V 10W alongwith accessories complete all as per manufacturer's instructions and as directed by Engineer-in-charge.
30
-
-
... More
Supply and fixing SMPS 20 Amp LED Driver complete all as specified and as directed by Engineer-in-charge.
2
-
-
... More
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements