Military Engineer Services Tender

All as per Srl item No 2.00 above but of 185 sqmm 3.5 core.

All as per Srl item No 2.00 above but of 150 sqmm 3.5 core.

All as per Srl item No 2.00 above but of 120 sqmm 3.5 core.

All as per Srl item No 2.00 above but of 95 sqmm 3.5 core.

All as per Srl item No 2.00 above but of 70 sqmm 3.5 core.

All as per Srl item No 2.00 above but of 50 sqmm 3.5 core.

All as per Srl item No 2.00 above but of 35 sqmm 3.5 core.

All as per Srl item No 2.00 above but of 25 sqmm 4 core.

All as per Srl item No 2.00 above but of 16 sqmm 4 core.

All as per Srl item No 2.00 above but of 16 sqmm 2 core.

All as per Srl item No 2.00 above but of 10 sqmm 2 core.

Excavation in trenches in soft or loose soil, not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out complete all as specified and directed. Notes : (i) Payment for excavation shall be made for one time in case the new cable is laid in the same trenches .

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing surplus excavated soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed.

Brick protection with sub class "B" bricks (old size) laid dry, flat in trenches over cable with longest dimension perpendicular to the axis of the cable complete all as specified and directed specified .

Sand cushioning in trenches and well ramming in layers with 8 cm below and 15 cm above the cable with fine dry sand for cable protection and complete all as specified and directed.

40mm bore GI tubing light grade as in cable protection pipe including all fittings as in replacement complete all as directed.

50mm bore GI tubing light grade as in cable protection pipe including all fittings as in replacement complete all as directed.

80mm bore GI tubing light grade as in cable protection pipe including all fittings as in replacement complete all as directed.

Boring under road/path/hard standing to pass the HT / LT UG cables upto 80mm dia pipe with the own arrangement of T&P complete all as specified and directed.

Heat shrinkable straight through joint for LT XLPE UG cables suitable for cable of size 300 Sqmm 3.5 core aluminium complete all as specified and directed, Make : Denson Raychem/Mohindra/M-Seal.

Heat shrinkable straight through joint for LT XLPE UG cables suitable for cable of size 185 to 240 Sqmm 3.5 core aluminium complete all as specified and directed, Make : Denson Raychem/Mohindra/M-Seal.

Heat shrinkable straight through joint for LT XLPE UG cables suitable for cable of size 70 to 150 Sqmm 3.5 core aluminium complete all as specified and directed, Make : Denson Raychem/Mohindra/M-Seal.

Heat shrinkable straight through joint for LT XLPE UG cables suitable for cable of size 25 to 50 Sqmm 3.5 core aluminium complete all as specified and directed, Make : Denson Raychem/Mohindra/M-Seal.

Heat shrinkable straight through joint for LT XLPE UG cables suitable for cable of size 10 to 16 Sqmm 4 core aluminium complete all as specified and directed, Make : Denson Raychem/Mohindra/M-Seal.

Feeder pillers box factory made -out door type made out of MS sheet (CRCA) of thickness not less that 3 mm. of size 75 x 75 x 45 cm with aluminium bus bar strip 4 Nos of 400 Amps rated suitable for 1100 volt (LT) mounted on LT porcelain insulator front opening door two leaf braced with hinged, mounted on 4 Nos of angle iron 50x50 mm duly welded with box and grouted in PCC block of size 30cmx30cmx 15cm in concrete 1: 3 : 6. Top of box MS sheet duly bent in/slope, tapper with projection of 30 mm on all side, weather/vermin proof with high quality of rubber beeding on panel door, cable entry arrangements at bottom includes earthing terminals 2 Nos at both side and painted with two coats of smoke grey stove enameled paint over a primer coat including providing MCCB, 4 pole,fixed type 160 Amps, 25 KA rating-01 No as in replacement complete all as directed by Engr-in-Charge.

Supply , install, testing and commissioning of LT Panel board as per IS-8632, made out of 3.15 mm CRCA Sheet, outdoor cubical type totally enclosed weather dust and vermin proof with front and rear opening of 415 Volts 3 phase 4 wire 50 Hz including internal wiring with copper conductor including two coats of synthetic enamel paint over one coat of red oxide primer including connecting all in coming and out going cable feeders with necessary cable glands, thimbles etc. The panel should have angle iron base frame made of 40 x 40 x 6 mm fixed / grouted, including suitable size PCC blocks with PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate foundation support , well finishing with cement mortar and comprising of the following switchgear and accessories and including taking down existing LT panel any type :- (a) 04 strips of aluminium bus bar with insulation colour sleeves of capacity 600 Amp fixed on PVC heat shrinkable insulator heavy duty. (b) Volt meter 0-500 volts, digital type, panel mounted, flush type, three phase of size 96x96mm complete with built in selector switch - 01 No. (c) Amp meter 0-400 Amps, digital type panel mounted, flush type, three phase of size 96x96mm complete with built in selector switch with suitable size of CTs-01 No. (d) Indicator lamp LED type on all phases (R,Y,B) - 03 Nos. (e) MCCB 400 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 35 kA rating with adjustable thermal &Aadjustable magnetic type - 01 Nos (incoming) (f) On load change over switch 400 Amps, 4 pole - 01 Nos (g) MCCB 250 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 25 kA rating with adjustable thermal & Adjustable magnetic type - 02 Nos (outgoing) (h) MCCB 200 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 25 kA rating with adjustable thermal & Adjustable magnetic type - 02 Nos (outgoing) (j) MCCB 160 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 25 kA rating with adjustable thermal & fixed magnetic type - 01 Nos (outgoing) (k) MCCB 100 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 25 kA rating with adjustable thermal & fixed magnetic type - 02 Nos (outgoing) (l) MCB 63 Amps, SPN, 10 KA rating - 02 Nos

Supply , install, testing and commissioning of LT Panel board as per IS-8632, made out of 3.15 mm CRCA Sheet, outdoor cubical type totally enclosed weather dust and vermin proof with front and rear opening of 415 Volts 3 phase 4 wire 50 Hz including internal wiring with copper conductor including two coats of synthetic enamel paint over one coat of red oxide primer including connecting all in coming and out going cable feeders with necessary cable glands, thimbles etc. The panel should have angle iron base frame made of 40 x 40 x 6 mm fixed / grouted, including suitable size PCC blocks with PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate foundation support , well finishing with cement mortar and comprising of the following switchgear and accessories and including taking down existing LT panel any type:- (a) 04 strips of aluminium bus bar with insulation colour sleeves of capacity 600 Amp fixed on PVC heat shrinkable insulator heavy duty. (b) Volt meter 0-500 volts, digital type, panel mounted, flush type, three phase of size 96x96mm complete with built in selector switch - 01 No. (c) Amp meter 0-300 Amps, digital type panel mounted, flush type, three phase of size 96x96mm complete with built in selector switch with suitable size of CTs-01 No. (d) Indicator lamp LED type on all phases (R,Y,B) - 03 Nos. (e) MCCB 250 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 25 kA rating with adjustable thermal & Adjustable magnetic type - 01 Nos (Incoming) (f) MCCB 200 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 25 kA rating with adjustable thermal & Adjustable magnetic type - 02 Nos (outgoing) (g) MCCB 100 Amps, 3 phase, 415 volt, 4 pole, breaking capacity 25 kA rating with adjustable thermal & fixed magnetic type - 02 Nos (outgoing) (h) MCB 63 Amps, SPN, 10 KA rating - 04 Nos

Flame proof circuit wiring in ERW conduit with two single core cable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size 1.5 Sqmm and including of one run earth wire single core cable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size of 1.5 Sqmm to be drawn in ERW stove enamelled black rigid conduit ISI marked. All flame proof conduit accessories such as tee, bend elbow, conduit junction box as in replacement complete all as specified and directed Note : ERW conduit, conduit accessories, circuit wires and earth wires complete shall be treated as one unit for the purpose of payment Make of steel conduit : ICI / Steel-Craft, make of wiring : L&T / Finolex / RR Kable / Grandlay

Flame proof circuit wiring in ERW conduit with two single core cable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size 2.5 Sqmm and including of one run earth wire single core cable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size of 1.5 Sqmm to be drawn in ERW stove enamelled black rigid conduit ISI marked. All flame proof conduit accessories such as tee, bend elbow, conduit junction box as in replacement complete all as specified and directed Note : ERW conduit, conduit accessories, circuit wires and earth wires complete shall be treated as one unit for the purpose of payment Make of steel conduit : ICI / Steel-Craft, make of wiring : L&T / Finolex / RR Kable / Grandlay

Flame proof circuit wiring in ERW conduit with two single core cable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size 4 Sqmm including of one run earth wire of 2.5 Sqmm to be drawn in ERW stove enamelled black rigid conduit ISI marked. All flame proof conduit accessories such as tee, bend elbow, conduit junction box as in replacement complete all as specified and directed Note : ERW conduit, conduit accessories, circuit wires and earth wires complete shall be treated as one unit for the purpose of payment Make of steel conduit : ICI / Steel-Craft, make of wiring : L&T / Finolex / RR Kable / Grandlay

Flame proof wiring in ERW conduit with three single core cable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size 6 Sqmm and including of one run earth wire single core cable (FRLS) PVC insulated unsheathed 1100 volt grade copper conductor multi standred of size of 4 Sqmm to be drawn in ERW stove enamelled black rigid conduit ISI marked. All flame proof conduit accessories such as tee, bend elbow conduit junction box as in replacement complete all as specified and directed Note : ERW conduit, conduit accessories, circuit wires and earth wires complete shall be treated as one unit for the purpose of payment Make of steel conduit : ICI / Steel-Craft, make of wiring : L&T / Finolex / RR Kable / Grandlay

Flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 10 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc duly tested & certified by CMRI-Dhanbad as in replacement complete all as specified. Make : Crompton/Bajaj/SUDHIR / SHYAAM / Flexpro / BALIGA

Flame proof/weather proof direct entry type Junction box dia 120 x 70(H) mm as in replacement complete all as specified Make : Crompton/Bajaj/SUDHIR / SHYAAM / Flexpro / BALIGA

Flame proof/weather proof switch socket and plug combined in LM6, 16 A 240 Volts 2 pin and earth plug fully interlocked suitable for installation in hazardous as per IS-2147/62 alluminium alloy/cost iron neoprene gasket dgree of protection IP-65 certified by CMRI Dhanbd as in replacement complete all as specified. Make : Crompton/SUDHIR / SHYAAM / Flexpro / BALIGA

Flame proof light luminaries well glass suitable for LED light having 70 Watt compress of body mode in die cast aluminium housing luminaire, heat resistant toughend glass cemented to cast aluninuuim, retainging ring fixed to main body , mounted on MS galvanised iron cradle and base plate for rotating in horizontal and vertical planes, luminarire is provided with LED lamps, and control driver, connector etc complete with all accessories main connector suitable up to 6 Sqmm incoming cable and earthing terminals and certified and tested by CMRI Dhanbad. and fixing at convenient location complete all including dismantling the old light fitting any type complete all as specified and directed. Make : Crompton/Bajaj/SUDHIR / SHYAAM / Flexpro / BALIGA

Flame proof light luminaries well glass suitable for LED tube light having 1 x 16 to 20 Watt compress of body mode in die cast aluminium housing luminaire, heat resistant toughend glass cemented to cast aluninuuim, retainging ring fixed to main body , mounted on MS galvanised iron cradle and base plate for rotating in horizontal and vertical planes, luminarire is provided with LED lamps, and control driver, connector etc complete with all accessories main connector suitable up to 6 Sqmm incoming cable and earthing terminals and certified and tested by CMRI Dhanbad. and fixing at convenient location complete all including dismantling the old light fitting any type complete all as specified and directed. Make : Crompton/Bajaj/SUDHIR / SHYAAM / Flexpro / BALIGA

Flame proof weather proof DB TPN 415 Volts 4 way with bus bar in cast aluminium LM-6 enclosure operated externally spring type knob complete with cable entries for incoming and out going cables from bottom with cable glands suitable for hazardous area and confirming to IS-2147/62 neoprene gasket degree of protection IP-65 including providing MCB etc as in replacement complete all as specified and directed are as under :- Incoming (a) MCB 63 Amps, TPN , 10 KA, 'C' series Out going : (a) MCB SP 6 to 32Ams, 10 KA, 'C' series - 11 Nos, (b) MCB SPN 40 Amps, 10 KA, 'C' series - 03 Nos.Make of DB : SUDHIR / SHYAAM / Flexpro / BALIGA

MCB DB TPN vertical type 8 way double door fabricated out of best quality of CRCA steel sheet duly fitted with DIN channel neutal link end copper bus bar cap 200 Amp high quality semi galssay powder paint and backed at high temprature dust & verman proof seven tank process suitable for multi phase out going also for housing of MCCB TPN 100/ 63 Amps as incomer and MCB SP/DP/TPN/ Isolator as out going as in replacement complete all as specified. Make: Standard/HPL/Havell's./ Legrand Note:- MCCB, MCB SP/Isolator etc shall be measured & paid separately under respecative schudle item. Make : Legrand / L&T / Siemens / Schneider

Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy phosphatised, powder painted, surface mounting TPN 4 way, 415V with bus bar rating 200 A dust and vermin proof, neutral links, earth bar and din rail blanking plates; double door suitable for incorportation of MCB's and isolators as in replacement complete all as specified. Make : Legrand / L&T / Siemens / Schneider

MCCB four pole (TPN) 415 Volt adjustable type 100 Amps 25 KA as in replacement complete all as specified . Make : Legrand / L&T / Siemens / Schneider

MCB TPN 63 Amps, 10 KA rating, 'C' series 10 KA 415 volt 50Hz as in replacement complete all as specified. Make : Legrand / L&T / Siemens / Schneider

MCB, single pole 6 to 32A curent rating, 240V,50 Hz, 'C' curve AC supply over load and short circuit protection and rupturing (breaking) capacity not less than 10 KA, ISI marked as in replacement complete all as specified. Make : Legrand / L&T / Siemens / Schneider

MCB SPN 63A current rating, 240V,50 Hz, AC short circuit protection and rupturing capacity (breaking)10 KA, ISI marked and suitable for lighting and other domestic loads as in replacement complete all as specified. Make : Legrand / L&T / Siemens / Schneider

Earthing complete with galvanised steel earth plate, electrode 60cmx60cmx6mm thick, buried directly in ground (earth plate not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5metre below normal ground level connected to earth lead of GI wire 4mm dia by means of bolts, nuts, check nuts and washers of GI with protection pipe of GI light grade 15mm bore and connected to earth test point , earth plate surrounded by packed alternate layers of charcoal and common salt copper and water pipe 20mm bore GI light grade with funnel and wire mesh grade all as shown in electrical plate No. 3 of SSR Part-I, testing on completion including PCC chamber (1:3:6) type C-1, using 20mm graded stone aggregate and 80mm thick cover with RCC 1:2:4 type B-1 using 20mm graded stone aggregate and 8 mm dia TMT bars @ 100 mm C/C and angle iron frame including excavation earthwork and returning filling etc, as in repair complete all as specified.

Dismantling/Taking down unserviceable flame proof light fittings / flood light fittings/Focus light fittings of HPSV/HPMV / MH Lamp fitting 70/80 /125/150/250/400 Watt , 1 x 36/ 2 x 36 watts FTL, CFL any type by Opening/taking out unserviceable spare parts such as copper bonded choke, igniter, starter,lamp holder, lamp etc. repairing to cable connection /loose connection for any type of fitting as and when required to each fitting including reassembling and replacement of unseviceable items including testing complete all as specified and directed by Engr in Charge. Note : 1. The cost of spares such as bulbs, copper bonded choke, ignitor etc shall be paid as supply only items. 2. Rate for flexible copper wires of existing size for connceting the light to ceiling rose / junction and PVC tape to taping the joint properly and Tools, Plants & safety equipments required for repairs shall be included in the rate quoted by the tenderer

Supply only of metal halide lamp 150W 230 V screw type single ended tubular Make- C&S/ Philips/ Bajaj / CG

Supply only of Metal Halide Lamp 250 Watt screw type single ended tubular Make- C&S/ Philips/ Bajaj / CG

Supply only of HPSV lamp tublar and screw type 150W 230 V Make Philips/ Bajaj/ C&S./CG

Supply only of HPSV lamp tubular and screw type 250W 230 V Make Philips/ Bajaj/ C&S./CG

Supply only of HPSV/MH/HPMV copper bonded choke 250Watt Make : C&S/Philips/Bajaj/CG

Supply only of MH/HPSV copper bonded choke 150W 230 V Make : C&S/Philips/Bajaj/CG

Supply only of Ignitor for MH/HPSV/HPMV Lamp 70/125/150/250/400 Watt Make : C&S/Philips/ Bajaj/CG

Supply only of Lamp holder Screw type for HPSV/MV Lamp 70/ 125/150/ 250 / 400 Watt , Make- Hevells /Mysore/Asian

Supply only of electronic choke for CFL/ FTL 1 x 36/40 Watt Make : C&S/ Philips/Bajaj/CG

Supply only of Flourescent Tube rod four feet long, 36/40 Watt, 230 Volts Make : C&S/ Philips/Bajaj/CG

Supply only of Bi-pin holders of FTL, 230 Volts Make : C&S/ Philips/Bajaj/CG

Supply only of LED lamp 9 Watt, retrofit type Watt, 230 Volts Make : C&S/ Philips/Bajaj/CG

Cleanning of UG static water tank of approximate capacity 20000 gallons in Technical / domestic area after dewatering the tank using diesel engine pump sets and cleaning with a steel wire brush, removing mud, sludge, foreign articles, ulgi etc and sand upto bottom level and wash with bleaching powder solution and applying one coat of white wash inside of tank including writing date of cleaning with while colour over black colour base of synthatic enamel paint, and all as specified and directed by Engr-in-charge for the Note : 1. Sludge /waste material shall be thrown away from SWT premises where directed by Engr incharge .