Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 88,760Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_683505_2Tender No
TOKEN NO GE ABH-64/24-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
51.9
-
-
... More
S & F 125 mm long aluminium handle cast type anodized.
72
-
-
... More
S & F 150 mm long aluminium anodised barrel tower bolt of extended section and fixed.
78
-
-
... More
S & F 100 mm long butt hinges extruded alumiunium alloy with galvanised mild steel hinges pin, anodised and fixed.
129
-
-
... More
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm all as specified.
55
-
-
... More
M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified.
0.75
-
-
... More
S & F Flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides as per SSR Part – I all as specified.
19.32
-
-
... More
S & F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete/
18
-
-
... More
S & F Aluminium, anodised, barrel tower bolts 200mm long of extruded section all as specified and directed.
28
-
-
... More
S&F Aluminium handles 150mm size, cast type, anodised all as specified and directed.
30
-
-
... More
S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixe.
12
-
-
... More
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,150 mm fixed in floor all as specified and directed.
13
-
-
... More
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-charge.
110
-
-
... More
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
22
-
-
... More
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete
12.25
-
-
... More
S&F 4 mm thick sheet glass n exc 0.5 sq. m in each pane ordinary quality fixed in aluminium window/ventilator complete all as specified.
12.5
-
-
... More
Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.
736
-
-
... More
M & L for rendering 15mm thick on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement.
525.62
-
-
... More
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
190
-
-
... More
M&L rendering 10 mm thick in cement mortar 1:3 om fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement.
155
-
-
... More
Shortcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix(minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characteristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound/weak concrete material 25mm average thickness from slabs, beams, columns etc with manual chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@6 sqm/ltr at DFT of 100 microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge.
Note : After completion of shorcreting the splash of cement on wall to be cleaned completely.
65
-
-
... More
S & F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and typing with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement all as specified & directed by Engineering-in-Charge.
230
-
-
... More
M&L Washed coloured stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern by GE including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
185
-
-
... More
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium channel, nailed to the under layer of panels complete as per specifications and direction of the Engineer-in-charge
480
-
-
... More
M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.
155
-
-
... More
M & L applying three coat of white wash on newly plastered or unplastered wall surfaces including preperation of surfaces, complete all as specified.
66
-
-
... More
M&L applying two coats of cement base paint on newly plastered or unplasterd wall surfaces including preparation of surfaces complete all as specified & directed.
60
-
-
... More
M&L applying one coats of cement base paint on old deecorated or undecorated wall surfaces including preparation surfaces by washing rubing down and stoping of distempered and painted surfaces complete all as specified & directed.
60
-
-
... More
M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed by Engr-in-Charge.
32
-
-
... More
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer .
51
-
-
... More
Demolition of cement concrete of any description and in any position not otherwise specifically provided for
17.56
-
-
... More
M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified. Note :- Plan area shall be measured for payment purpose.
40
-
-
... More
M&L for PCC (1:5:10) using 40 mm grageded burn brick aggregate as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed.
15.2
-
-
... More
Dismantling brick terracing tiles single layer from roof laid and pointed in cement mortar and removing/disposal off from the site complete all as specified and as directed by Engineer-in-charge.
197
-
-
... More
Demolition/taking out of mud from roofs, any thickness, including removing / cutting uprooting grass,vegetations and roots of small plants etc on roof and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-
Charge
44.4
-
-
... More
M & L Pain Cement Concrete 1:2:4 type B–0 using 12.5mm graded stone aggregates on roof slab all as specified and directed by Engineer - in – Charge .
3.7
-
-
... More
M&L for rendering 15mm thick water proofing plaster in cement mortar (1:3) on roof slab admixed with integral liquid water proofing compound
207
-
-
... More
M&L for preparation of roof top surfaces providing and applying UV stable single component smart care damp proof ultra is a fire reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete surface in three coats including self primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr/10 Sqm with a thickness of 650 micron Note : 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly got approved from accepting officer in writing before incorporation and paid only after receiving of the warranty certificate from the company Make : Asian paint or equivalent as approved by GE
Note ; The treatment shall be carried out by authorised applicator approved by GE as per the manufacturedinstructions.
207
-
-
... More
Material and labour for 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement includding 15mm thick bedding in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.
60
-
-
... More
Material and labour for 40mm thick brick tiles (old serviceable tiles obtained from demolition/dismantled item shall be reused) laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement includding 15mm thick bedding in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.
40
-
-
... More
M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed.
2.36
-
-
... More
Supply only liquid water proofing compound
9.48
-
-
... More
Demolition of cement concrete (un re-inforced) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
24.55
-
-
... More
M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge.
70
-
-
... More
S&F machine pressed precast concrete interlocking paver block with grey cement with pigment, any shape and size confirming to IS 15658-2006 of 60mm thick M-35 grade including and over 25mm thick sand cushion.
60
-
-
... More
M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
2.4
-
-
... More
M&L 50mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement.
57
-
-
... More
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
825
-
-
... More
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
571
-
-
... More
M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
114
-
-
... More
M&L for 25mm thick cement concrete 1:2:4 type B-1 as in sub base of floor etc. complete all as specified and directed.
204
-
-
... More
Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles complete all as specified and directed
0.51
-
-
... More
M&L for 16 mm thick granite (of any type) work (table rubbed and polished) in cooking platforms and like in CM 1:4 and pointed with white cement with admixture of pigment to match the shade of granite over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
14
-
-
... More
M&L for 16mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
2.89
-
-
... More
Providing edge moulding to 16mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete
44.7
-
-
... More
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
39.85
-
-
... More
M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed.
40.85
-
-
... More
Demolition of cement concrete (reinforced) reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for
2
-
-
... More
M&L for reinforcement 10mm and over, cut to length , bent to shape required , including cranking , benching sprirally for hooping for columns , hooking ends and binding witjh and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quantity confirming to IS all as specified.
325
-
-
... More
Formwork to soffits of suspended slabs such as roof slabs , floor slabs , landing and similar work not exceeding 200mm thick all as specified
17.85
-
-
... More
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces complete all as specified.
22.7
-
-
... More
M&L for RCC (nominal mix) 1:2:4 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landing , balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
2
-
-
... More
Dismantling water tanks and removing to store of 1000 ltr capacity
6
-
-
... More
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified.
6
-
-
... More
S&F in repair 20 mm float ball valve high pressire of PTMT with epoxy coated aluminium rod & high density platic ball screwed for iron pipe and fixed. ( Min weight 15 mm - 142 gms/20 mm 210 gms/25 mm 455gms/40mm 690 gms)
9
-
-
... More
S & F in repair vitreous china white oval shaped wash basin of size 550 x 400 mm including brackets,waste fitting 32 mm brass chromium plated complete all as specified and as directed.
14
-
-
... More
S&F in repair vitreous china squatting pan, Orissa Pattern size 580mm x 440 white with integral foot rest and ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position and embedded lean/lime concrete bedding,
12
-
-
... More
S&F in repoair wall mounted vitreous china wash down water closet pan pedestal pattern, white including connection pipe to flushing cistern, connection only to flushing cistern anti syphonage pipe with PVC flush pipe of 32mm dia and 'P' or 'S' trap device and inclding plastic seat cover with mild steel chromium plated hinging complete all as specified and as directed by Engineer-in-Charge. Make Cera cat part no S1041101 or equivalent.
8
-
-
... More
S&F in repair EWC Jet spray complete all as specified and directed.
8
-
-
... More
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
8
-
-
... More
S&F in repair PVC 10 ltr syphonic action type flushing cistern, loe level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32 mm bore and connection to WC pan complted all as specified.
12
-
-
... More
S & F in repairs vitreous china Half stall urinal back white, providing and fixing plugs,bedding urinal agianst wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws,pointing around urinal back in cement ,fixing automatic flusing cistern with brackets,flush pipe ,grating,water spreader and union for discharge pipe complete all as specified and directed
6
-
-
... More
S & F in repairs 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified.
23
-
-
... More
S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.
12
-
-
... More
S & F in repairs brass chromium plated wall mixer with for mixing hot and cold water screwed down for iron pipe and fixed as directed by Engr-in-charge : Make : ESS ESS/Prayag/Jaquar or equivalent.
18
-
-
... More
S&F in repairs 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed.
26
-
-
... More
S&F in repair 15 mm bore CP angle cock one way chromium plated, high pressure with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified.
75
-
-
... More
S & F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15 mm dia steel pipe or union.
20
-
-
... More
S & F in repairs, soap dish chromium plated brass complete all as specified and directed by Engineer-in-Charge.
32
-
-
... More
S&F in repair beveled edge mirror of selected quality glass 5.5 mm on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repaire.
14
-
-
... More
S&F in repair PVC connection both side brass unions internal for size 15mm dia and 450mm long all as specified.
60
-
-
... More
S & F Waste coupling for 32 mm bore dia. of discharge pipe PTMT (half or full threaded) . Minimum weight 45 gms.
6
-
-
... More
S&F in repair SS Bottle trap 32mm bore dia of discharge pipe with having minimum water seal of 25mm .
21
-
-
... More
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store
275
-
-
... More
Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified
245
-
-
... More
Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store
100
-
-
... More
Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.
100
-
-
... More
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or on cealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
245
-
-
... More
S&F in repair gate valve cast copper alloy screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe of size 20mm.
18
-
-
... More
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
22
-
-
... More
Dismantling of PVC pipes of 100 mm dia fixed to wall/floor etc complete all as specified and directed.
87
-
-
... More
Dismantling of PVC pipes of 75 mm dia fixed to wall/floor etc complete all as specified and directed.
27
-
-
... More
Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.
56
-
-
... More
Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.
66
-
-
... More
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.
24
-
-
... More
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
67
-
-
... More
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.
34
-
-
... More
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.
17
-
-
... More
S&F PVC (SWR) bends 110 mm bore provided with access door complete all specified and directed.
8
-
-
... More
S&F PVC (SWR) bends 110 mm bore complete all specified and directed.
22
-
-
... More
S&F PVC (SWR) bends 75 mm bore provided with access door complete all specified and directed.
21
-
-
... More
S&F PVC (SWR) bends 75 radius complete all specified and directed.
15
-
-
... More
S&F 110 mm PVC (SWR) junction single (Single T) equal or unequal provided with access door complete all specified and directed.
10
-
-
... More
S&F 75 mm PVC (SWR) junction single (Single T) equal or unequal provided with access door complete all specified and directed.
16
-
-
... More
S&F PVC (SWR) vent cowl 75 mm redius complete all specified and directed.
6
-
-
... More
S&F PVC (SWR) floor trap 75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4
22
-
-
... More
S&F 110mm PVC(SWR) sanitary connection socket to fit out let of WC complete all as specified and directed.
8
-
-
... More
S&F 110mm PVC(SWR) coupler complete all as specified and directed
18
-
-
... More
S&F 75mm PVC(SWR) coupler complete all as specified and directed
18
-
-
... More
S & F Stack clamps for 75 mm bore of pipes made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roofs all as specified and directed.
22
-
-
... More
S & F Stack clamps for 100 mm bore of pipes made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roofs all as specified and directed.
10
-
-
... More
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
22
-
-
... More
Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer. Including all required fixing material such as SS brackets, screws, adhesive etc., including taking out old any type cabinet complete all as specified and as directed by Engineer-in-charge.
Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment.
(ii) Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ.
(iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
10
-
-
... More
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
7
-
-
... More
S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge.
16
-
-
... More
S & F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed.
18
-
-
... More
S&F magnet ball catcher for cupboard shutter, complete all as specified and as directed by Engineer-in-Charge
26
-
-
... More
S&F 125 mm size hasp and staple,aluminium anodished,including bolt to hinge plate and fixed with screws,complete all as directed.
4
-
-
... More
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges, lock strike plate etc complete all as specified size of frame 125 x 60mm all as specified and directed by Engineer - in - Charge .
10
-
-
... More
S & F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified.
3.5
-
-
... More
S & F 35mm thick factory made 2nd class hard wood shutter with top pannel glazed and skeleton open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; and bottom panel with panel of of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces.The size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified.
2.5
-
-
... More
S&F Aluminium handles 150mm size, cast type, anodised all as specified and directed.
18
-
-
... More
S&F MS 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
S & F powder coated aluminum sliding window three track with frame & two glass shutter using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminum powder coated section aluminum cleat , PVC track, bearing, handle lock rubber beading etc complete fittings as approved. Note :- Size of aluminum section shall be under – (i) three track top and vertical – jindal main 2010. Section No 20621 or equivalent as approved by GE.
(ii) Three track bottom – Jindal main – 2010 section 20620 or equivalent as approved by GE.
(iii) Shutter Vertical Section - Jindal main – 2010 section 20604 or equivalent as approved by GE.
(iv) Shutter top and bottom - Jindal main – 2010 section 20604 or equivalent as approved by GE.
(v) Shutter vertical middle ( interlock) - Jindal main – 2010 section 20605 or equivalent as approved by GE.
8
-
-
... More
S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified
82
-
-
... More
S&F powder coated aluminum Window/Ventilators shutter side hung type without sash, aluminum section weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified.
4
-
-
... More
S&F powder aluminum anodized grill diamond shape 100mm x 100mm aperture of 6 mm dia round bars including necessary joining cleats, clips anodised complete all as specified.
10
-
-
... More
S & F 4 mm thick figured glass pin headed and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge.
0.6
-
-
... More
S & F drapery curtain rod, mild steel, rubber moulded 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge .
22
-
-
... More
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
13
-
-
... More
S & F false ceiling not less than 9 mm thick gypsum tiles (600mm x 600 mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/hangers 4 mm dia. GI wire (upto 1200 mm length) adjusting level fixed to roof slabs/trusses complete all as specified and as directed by Engineer-in-Charge.
Make : Saint Gobain / Armstrong/Everest
13
-
-
... More
M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
39.62
-
-
... More
M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of interior grade ready made wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
150
-
-
... More
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali-resistant primer of approved shade on walls all as specified & directed by Engineer-in-Charge
560
-
-
... More
M&L for preparation of old plastered surfaces by removing old treatment and applying two coats of cement base paint over a coat of alkali-resistant primer of approved shade on walls all as specified & directed by Engineer-in-Charge
120
-
-
... More
M&L for preparation of old plastered surfaces by removing old treatment and applying two coats of exterior grade ready made wall putty and making it smooth with sand paper or by mechanical method then applying two coats of weather proof exterior emulsion over a coat of exterior primer of approved shade on walls all as specified & directed by Engineer-in-Charge
25
-
-
... More
M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
80
-
-
... More
M & L applying three coat of white wash on newly plastered or unplastered wall surfaces including preperation of surfaces, complete all as specified.
60
-
-
... More
M&L for two coats of synthetic enamel paint on steel surfaces over one coat of priming with red oxide or zinc chromate of any description, n. exc. 10cm in width or girth, not other wise described surfaces of any description,incl preparation of new surface when unconnected with other painting or when painted in a different tint
5.95
-
-
... More
M & L for providing cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate as in mass concrete,spreading, levelling coarse,grading concrete etc. complete all as specified and as directed by Engineer-in-charge.
7.3
-
-
... More
M&L for chequered cement concrete tiles (coloured) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and inculding screed bed or bedding layer of cement mortar 20 mm thick CM (1:6) all as directed by Engineer-in-Charge.
80
-
-
... More
S&F Glass dividing strips, 3 mm thick and 38mm width
28
-
-
... More
M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished even & fair to receive wall tiles comlpete all as specified and directed by Engineer - in - Charge .
58
-
-
... More
M & L 20mm thick screed bed on concrete surfaces in CM 1:4 finished even & fair to receive floor tiles comlpete all as specified and directed by Engineer - in - Charge .
82
-
-
... More
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade complete all as specified and directed by Engineer - in - Charge.
50
-
-
... More
M&L Non skid ceramic coloured /printed tiles (joint free) 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete all as specified and directed by Engr in Charge.
10
-
-
... More
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile shade complete all as specified and directed by Engr in Charge.
80
-
-
... More
Dismantling water tanks and removing to store of 500 ltr capacity
3
-
-
... More
S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I.
3
-
-
... More
S & F in repair brass chromium plated basin wall diverter mixer including concealed and exposed part complete all as specified and directed by Engr-in-charge.Make : Jaquar Cat Part No. ALI-CHR-85441K or equivalent.
2
-
-
... More
S&F sink mixer with regular swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed by Engineer-in-Charge.Make : Jaquar Cat Part No. ARI-CHR-39309 or equivalent.
1
-
-
... More
S & F in repairs brass chromium plated wall 3 in 1 single lever 3 inlet diverter mixer (both concelaed and exposed part ) with for mixing hot and cold water screwed down for iron pipe and fixed as directed by Engr-in-charge : Make : Jaquar Cat Part No. ALI-CHR-85193K or equivalent.
2
-
-
... More
S & F in repair brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge .
22
-
-
... More
S&F in repairs stainless steel kitchen sink 1.00mm thick with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.
1
-
-
... More
S & F in repairs stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge.
1
-
-
... More
S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. Make : Supreme/Vectus or equivalent
30
-
-
... More
Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge.
2
-
-
... More
M&L for PCC 1:3:6 type C-1 as in foundation,filling,mass concrete
0.5
-
-
... More
S & F framed work such as grills, cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified .
305
-
-
... More
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
30
-
-
... More
M&L for Shotcreting 25MM thick in RCC Facias, beams n.exc 450 in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characterristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 50mm average thickness from RCC Facias, beams with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specifications and disposal of debries for all lead and lifts complete all as specified and directed by Engineer-in-Charge
20
-
-
... More
M & L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note : Quantity will be measured perimeter of wall x depth of penetration.
12
-
-
... More
S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
131.02
-
-
... More
S&F for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
131.02
-
-
... More
S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed by Engr-in-charge.
131.02
-
-
... More
M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge.
0.1
-
-
... More
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.
12
-
-
... More
S&F plain, solid, straight chowkats and frames of Saal wood of size 115 x 80 mm single rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including fixing lugs, hinges etc. Note : Hinges shall be paid seperately.
34.5
-
-
... More
S&F 40 mm thick glazed shutters of Saal wood, open rebated and prepared to receive glass (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; complete all as specified and as directed by Engr-in-charge.
7.56
-
-
... More
S&F in repair PVC concealed type flushing cistern set of capacity 10 ltr with half frame including all fixing accessories and knob fixed in wall and including flush pipe of PVC 32mm bore and connection to WC pan making good dismantled portion of wall complete all as specifed and directed. Make:Cera cat part No B1110112 or equivalent
8
-
-
... More
S&F 6.3 mm thick sheet glass, ordinary quality fixed to wooden frame work in square / rectangle shape n exc 0.5 sqm in each pane complete all as specified and as directed.
1.34
-
-
... More
S&F 6.3 mm thick sheet glass, ordinary quality fixed to wooden frame work in square / rectangle shape exc 0.5 sqm in each pane complete all as specified and as directed.
7.37
-
-
... More
S&F mortice lock 6 lever (key lock type) with left/right handle inside and outside opening door and suitable for door thickness upto 45 mm as approved Engr-in-charge.
3
-
-
... More
M&L for applying PU polish (glossy finish) on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.
40
-
-
... More
S&F 10 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.
3.78
-
-
... More
S&F 600 mm long stainless steel handle for doors, design and pattern as approved by Engr-in-charge.
4
-
-
... More
S&F stainless steel glass door lock (key lock type) suitable for door thickness upto 10 mm as approved Engr-in-charge.
2
-
-
... More
S&F floor door closer machine complete set for toughned glass door with top and bottom complete all as specified and as directed.
2
-
-
... More
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate, fixed in floor complete all as specified and as directed.
5
-
-
... More
Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate.
162
-
-
... More
M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point/fan point/exhaust fan controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).
149
-
-
... More
All as per Srl item No. 184 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified.
33
-
-
... More
All as per Srl item No. 184 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified.
15
-
-
... More
M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.
20
-
-
... More
S&F switch Piano type single pole one way 5 Amp,230 VAC supply.
140
-
-
... More
S&F socket two in one ,3 Pin 5 Amps 230 VAC supply, .
28
-
-
... More
S&F switch Piano type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) .
13
-
-
... More
S&F socket Piano type 6 Pin 16 amp,230 VAC .
13
-
-
... More
Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .
36
-
-
... More
M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.
76
-
-
... More
S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.
47
-
-
... More
S&F for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
6
-
-
... More
M & L for Sub main wiring with 2 single core 4.0 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified.
(Note:- Three lengths of 6 sqmm cable and will be measured as one length).
98
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter,voltage 230 V ,50 Hz RPM 1200 ,copper winding of sweep 250mm and making suitable hole if required complete all as specified and directed.
12
-
-
... More
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 25 mm dia bore.
52
-
-
... More
S & F stop valve size 25 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.
6
-
-
... More
Taking down unserviceable main switches and MCB distribution boards single phase complete all as spd
3
-
-
... More
M&L for point wiring complete with 4 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 4 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.
2
-
-
... More
S&F switch Modular type single pole one way 5 Amp,230 V AC supply.
47
-
-
... More
S&F modular type socket two in one ,3 Pin 5 Amps 230 VAC supply, .
16
-
-
... More
S&F switch modular type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) .
7
-
-
... More
S&F modular socket Piano type 6 Pin 16 amp,230 VAC .
7
-
-
... More
S&F Electric bell ding dong complete all as spd
1
-
-
... More
S & F bell push modular type 5 Amp,complete all as specified.
1
-
-
... More
S& F plug and socket type DB (Functional unit)20 Amps capacity with provision of single pole 20 amps MCB,plug top and earth plug,grouted flush to walls complete all as specified.
2
-
-
... More
Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .
7
-
-
... More
M&L for modular type Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.
24
-
-
... More
S&F of fan regulator step down modular type heavy duly modular type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring).
4
-
-
... More
S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed.
26
-
-
... More
S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed.
4
-
-
... More
S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..
4
-
-
... More
M&L for LED 10W bulkhead fitting with IP-43 engineering plastic housing with clear ,single phase 240V, including 1.0sqmm copper flexible cable twiested three core alongwith flelxible PVC condiut from ceiling rose to fitting testing complete all as specified and directed .
4
-
-
... More
Supply and fixing LED light fitting mirror type with high output diffuser 1 /2 feet ,5 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
3
-
-
... More
S&F for WEE Plus LED Bldg security light luminaire of capacity 20/25 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 25W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
2
-
-
... More
M & L for Sub main wiring with 2 single core 6.0 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified.
(Note:- Three lengths of 6 sqmm cable and will be measured as one length).
60
-
-
... More
Taking down carefully existing ceiling fans of any sweep or size and hanging only after completion all as specified and directed by Engineer-in-charge.
4
-
-
... More
S& F air freshner PVC Exhaust fan of 250-300 mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 V single phase 50 Hz AC supply and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified and directed by Engineer-in-charge.
2
-
-
... More
S&F of Exhaust fan 300 mm 240 volts with metal body and louvers with incl all accessories and making hole if required at site , fixing, plastering, painting with existing color at site, after finishing the work.
1
-
-
... More
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safety valve,thermostate,NRV, connection piece etc all as specified and directed by Engineer-in-charge.
2
-
-
... More
S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core
100
-
-
... More
Supply and fix light grade 40 mm GI pipe for inserting in holes under road,floors etc.for cable protection complete all as specified and directed.
5
-
-
... More
Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC/Steel tubular poles/stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site.
24.3
-
-
... More
Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site
16.32
-
-
... More
Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge.
7.98
-
-
... More
M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured
6.48
-
-
... More
Supplying and laying un-reinforced precast concrete cable cover, class LV, type -I, flat peak, size 250 mm x 150mm x 40mm complete all as directed by Engr - in charge
600
-
-
... More
Boring of holes/Excavation by trenchless technology for boring holes under road ,pavement ,hardstanding using trenchless boring machine or by means of manual manpower suitable for inserting GI pipe any dia up to 50 mm including removal of surplus soil and makling good disturbed surface complete all as specified and directed . Note:- pipe for inserting as required shall be meausured and paid separately.
5
-
-
... More
Supply and fix LT main control board of CRCA sheet metal board of size 50cmX30 cm X 25 cm made out of 2 mm thick sheet vermin proof, including painting with 2 coats of synthetic enamelled paint over a coat of red oxide including copper busbar and fixed on/inside wall for fixing arrangement of existing electronic meter incl internal connection with suitable size of copper conductor wire and accessories , locking arrangement with opening handle comprises following euipments,internal wiring and termination of external cables, lugs nad glands and conduit as required including taking out of existing old unserviceable main control board comprising following : (A) Incoming :- MCB DP , 63 Amps, 240 Volts 10 KA - 01 Nos (B) Copper bus bar 75 Amps for phase and neutral and earth bar (C) Outgoing MCB SPN 32 Amps - 02 Nos
1
-
-
... More
M&L for ceiling light fitting of skylux LED efficient LED surface round type luminaire & galre free soft illumination of capacity 36 watt LED white coliur complete suitable for roof ceiling including connecting upto with driver 3 core flexible conductor copper of suitable size complete all asspecified anddirectedby Engrin-charge
6
-
-
... More
M&L for ceiling light fitting of skylux LED efficient LED surface round type luminaire & galre free soft illumination of capacity 15 watt LED white/warm coliur complete suitable for roof ceiling including connecting upto with driver 3 core flexible conductor copper of suitable size complete all asspecified anddirectedby Engrin-charge
21
-
-
... More
S&F neon strip LED light of warm colour or desiredcolour with complete driver /connector/adaptor of suitablecap withpower input of DC 2V,6.5W/Mtr consumption and 3000K warm white and 6500K coolday light, 120 LED. 580 lumensper mtr, IP65 surge cap upto 3.5KV approx with heat dessipation of length 50 Mtr roll incl all as specified and directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%