Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 87,200Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_656489_2Bid Award Id
ViewTender No
8939/NIT-12/24-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
27.75
-
-
... More
Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
14
-
-
... More
Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to better rough finished flat complete all as specified & directed by Engineer-in- charge.
31
-
-
... More
Form work to flat sides and soffits of floor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs, sides of chajjas etc and similar works rough finished flat surfaces complete all as specified & directed by Engineer-in- charge.
28
-
-
... More
Form work to sides of pillars , posts, struts piers, columns and stanchions and similar works rough finished complete all as specified & directed by Engineer-in- charge.
34
-
-
... More
Form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) fair finished complete all as specified and as directed by Engineer-in- charge.
35
-
-
... More
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
1780
-
-
... More
Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.
(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose)
380
-
-
... More
Material and labour for reinforced cement concrete M-25 (design mix) as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
6
-
-
... More
Material and labour for reinforced cement concrete M-25 (design mix) as in beams, cantilevers, bressummers., lintels, cills, steps; seismic and other similar bands complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
3
-
-
... More
Material and labour for reinforced cement concrete M-25 (design mix) as in columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
3
-
-
... More
Material and labour for reinforced cement concrete M-25 (design mix) as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
4
-
-
... More
Material and labour for brick work with sub class 'B' bricks, (old size bricks), straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
18
-
-
... More
Material and labour for brick work in half brick thick wall using sub class 'B' bricks (old size bricks) straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in- charge.
2
-
-
... More
Material and labour for plastering 15mm thick in cement mortar (1:6) on fare face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
40
-
-
... More
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- Water proofing compound shall be measured & paid separately as Supply only)
97
-
-
... More
Material and labour for rendering/plastering 5mm thick in cement mortar (1:3) on any face of ceiling, finished fair and even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
32
-
-
... More
Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.
4
-
-
... More
Material and labour for applying two coats of weather proof exterior emulsion paint (wheather coat Apex, 100% exterier grade) over a coat of exterior emulsion primer by using paint roller brush or electric paint spray machine, as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge
70
-
-
... More
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, and preparing the surfaces smooth by applying white cement based putty to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, and after preparing the surfaces applying two coats of oil emulsion distemper (washable), as approved tint/colour by using paint roller brush complete all as specified and as directed by Engineer-in-Charge.
40
-
-
... More
Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge
32
-
-
... More
Material and labour for 25mm thick cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in sub base of floor for leveling course, surface finished rough to recieved tile/Kota stone/PCC floor work complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Tile/Kota stone/PCC floor work shall be measured and paid separately under appropriate item of this schedule.
15
-
-
... More
Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
Material and labour for Glazed ceramic coloured tiles of size 300mmx 600mm / 450mmX 350mm// 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
25
-
-
... More
Material and labour for digital glazed coloured tiles (light shade, jointless) 8 to 10 mm thick square or rectangular area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
25
-
-
... More
Material and labour for digital glazed coloured tiles (light shade, jointless) 8mm to 10mm thick square or rectangular, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Material and labour 18-20mm thick, granite duly factory grinding and polished (table rubbed and polished) of approved colour for steps, jambs, pillars, window cill, shelves, counter sunk wash basin, platform/cooking platform or as directed, including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.
2
-
-
... More
Supply & fixing vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover (white or black colour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
1
-
-
... More
Supply and fixing two way bib cock with flange, chromium plated, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
1
-
-
... More
Supply and fixing hand shower (health faucet) ABS body including 1 meter long 8mm dia flexible tube and including wall hook complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply & fixing vitreous china wash hand basin oval type under counter, white colour, of size 600mm x 360mm x 95mm excluding taps, but including fancy type 32mm waste coupling and waste pipe, fixing/counter sunked in granite slab, complete all as specified and as directed by Engineer-in-Charge.
Note :- Granite slab shall be measured and paid separately under appropriate item of BOQ.
1
-
-
... More
Supply & fixing brass CP single lever basin mixer or mixing hot and cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Note :- Granite slab shall be measured and paid separately under appropriate item of BOQ.
1
-
-
... More
Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge.
40
-
-
... More
Supply and fixing for bib cock long body with flange, chromium plated with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
1
-
-
... More
Supply and fixing for brass CP wall mixer telephonic with hand shower with 1.5 metre flexible SS tube, mixing hot and cold water screwed down for iron pipe complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
1
-
-
... More
Supply and fixing for stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
1
-
-
... More
Supply & fixing chromium plated shower rose 200x200mm size, square shape single flow (ABS body chrome plated with grey face plate) with swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply and fixing stop valve/angle valve cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
30
-
-
... More
Supply & fixing 450 mm long PVC connection 15mm size with both ends, brass fly nut complete all as specified & directed by Engineer-in-charge.
6
-
-
... More
Supply and fixing looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood, fancy type PVC mounlded beading alround and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Supply & fixing brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug, bracket with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Supply and fixing soap dish chromium plated fancy type of standard quality and size complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply and fixing Toilet paper holder chromium plated of standard quality and size complete, all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply and fixing corner Glass shelf with bracket made up of glass 30 cm in size complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply and fixing sheet glass shelf assembly of size 60cm long, 12cm wide and 5.5mm thick glass shelf, including chromium plated bracket guard railing, fixed on wall with chromium plated catcher brackets, brass screws and PVC plug complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply & fixing vitreous china urinal, half stall type, white of size 345mm x 320mm x 560mm, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling and 32mm dia waste pipe and pointing around urinal back in cement mortar complete all as specified & directed by Engineer-in-charge.
1
-
-
... More
Supply & fixing 10mm thick superior quality toughened glass for urinal partition fixed with SS brackets on walls complete all as specified & directed by Engineer-in-charge.
2
-
-
... More
Supply and fixing Cast iron floor/ nahani trap 75mm bore, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Material & Labour for 100 mm bore cast iron soil waste and vent pipe (sand cast pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay including nut bolt and jointing with cement mortar complete all as specified and as directed by Engineer-in- charge.
6
-
-
... More
Material & Labour for 75 mm bore cast iron soil waste and vent pipe (sand cast pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay including nut bolts and jointing with cement mortar complete all as specified and as directed by Engineer-in- charge.
6
-
-
... More
Supply & fixing 100mm bore cast iron plain bends tapers etc complete all as specified and as directed by Engineer-in- charge.
3
-
-
... More
Supply & fixing 75mm bore cast iron plain bends tapers etc complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Supply & fixing 100mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge.
1
-
-
... More
Supply & fixing 75mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge.
1
-
-
... More
Material and labour for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified & directed by Engineer-in- charge.
12
-
-
... More
Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
15
-
-
... More
Material and labour for moorum/red bajri bed to DWC drain pipes, spread/laid in trenches in layers not exceeding 15cm thick, levelled and rammed including watering complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including slightly rounded or chamfered angles and including necessary form work complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
Supply only fine sand without silt (Fazilka/Zera or any other approved sources) for filling under interlocking tiles and the interstices etc complete all as specified and as directed by the Engineer-in-Charge.
1.5
-
-
... More
Supply and fixing 60 mm thick (M35 grade) precast interlocking tile/paving block factory casted (made by using PVC paver mould / Rubber paver moulds on Vibrating Table Machine) using grey cement and pigment, prepolished & preglazed, shape haxagon / trigular / zigzag / I-shaped etc, as directed, prepolished & preglazed, specification as per relevant IS, having compressive strength not less than 350 Kg/ Sqcm, laid over sand upto required thick layer and filling the interstices etc complete all as specified and as directed by the Engineer-in-Charge.
Note : - (i) Sand for filling shall be measured & paid separately as Supply only but labour for spreding leveling shall be included in the unit rate of this item.
60
-
-
... More
Supply & fixing aluminium anodised frame, made out of aluminium section weighing 0.98 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron), for doors, windows, ventilators with one or more rebate including jointing cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.
Note :- If aluminium section used other than above mentioned weighing then weight of each section shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site.
40
-
-
... More
Supply & fixing anodised aluminium window/ventilator shutter side hung type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 No. for ventilator and 3 Nos for window each shutter) suitable handle (1 No.), including fixing of glass, complete all as specified and directed by Engineer-in-Charge.
Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ as supply only.
4
-
-
... More
Supply & fixing anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge.
Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ as supply only.
4
-
-
... More
Supply only 5mm thick figured glass pin head type in squares not exceeding 0.5sqm in each pane for steel or wooden doors/wondows including fixing material complete all as specified and as directed by Engineer-in- charge.
2
-
-
... More
Supply & fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tack or stainless steel wire staples complete all as specified & directed by Engineer-in- charge
2
-
-
... More
Supply and fixing factory made 105 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including butt hinges suitable Nos as directed for each leaf, complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply & fixing flush shutter 40mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides as cupboard and kitchen shutter including adhesive for pasting and screws for fixing to timber frame complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Material and labour for cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and as directed by Engineer-in-charge.
0.1
-
-
... More
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified & directed by Engineer-in-charge.
4
-
-
... More
Supply & fixing aluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
2
-
-
... More
Supply and fixing 100mm long stainless steel butt hinges heavy duty complete all as specified & directed by Engineer-in-charge.
6
-
-
... More
Supply & fixing 150 mm size extruded aluminium alloy handles cast type anodised complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Material and labour for 150mm bore (internal dia) salt glazed stone ware (SGSW) drain pipe, grade ‘A’, laid on concrete bed to required slope in trenches, jointing with packed spun yarn and in cement and sand mortar (1:1) and tested complete all as specified and directed by Engineer-in-Charge. (Note : Excavation, earrh work and concrete bed shall be measured and paid separately under appropriate item of BOQ.)
25
-
-
... More
Material and labour for cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as in bed of drain pipe of size upto 150mm bore (internal) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in- charge.
22
-
-
... More
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including inlet and out let connection and fixing ball valve and gate valve complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately as Supply only under appropriate item of BOQ.)
1
-
-
... More
Supply only ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge. Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS.
1
-
-
... More
Supply only gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.
2
-
-
... More
Material and labour pre-cast cement concrete (1:2:4) B-1 using 20 mm graded crushed stone aggregates as in pre-cast manholes cover slabs of any thickness size and shape including all necessary form work, finishing concrete surface fair and even and set in CM (1:6) at site as directed complete all as specified and directed by Engineer-in-Charge.
0.3
-
-
... More
Supply and fixing of stainless steel chromium plated pipe 25mm dia, wall thickness of pipe not less than 20 guage, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. complete all as specified & directed by Engineer-in- charge.
10
-
-
... More
Material and labour cutting into existing manholes/septic tank for connecting new drain upto 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round to 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified & directed by Engineer-in-charge.
1
-
-
... More
Material and labour for cleaning of top surfaces of concrete roof slab, lime terracing or surface of tiles with wire brush including flashing and junction of parapets etc. and surface painting with layer of blown grade bitumen of any penetration applied hot @ 1.20 Kg per Sqm and rendering in 15mm thick in cement mortar 1:6, priming the surface @ 0.30 kg per Sqm and laying 3mm thick APP based polymer membrane of weighing not less than 3.5 Kg per Sqm reinforced with polyster non woven fabric (weight not less than 150 Gm per Sqm) laid on primed surfaces at by torch application with side overlap 75mm and end overlap 100mm and tucked into the chasesas a treatment for moderate condition, complete all as specified and as directed by the Engineer-in-Charge.
32
-
-
... More
Material and labour for precast machine pressed cement concrete tiles with grey cement and no pigment of size 250x250x20-25 mm thick conforming to IS 1237-1980 set in cement slurry laid jointed and pointed in neat cement slurry including 15 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
32
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden/PVC doors/steel ventilator) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.
20
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Supply and fixing 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge.
10
-
-
... More
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
8
-
-
... More
Supply & fixing mild steel barrel tower bolt stove enamelled black with bright bolt 200 mm long, fixed complete all as specified & directed by Engineer-in- charge.
8
-
-
... More
Supply & fixing mild steel sliding door bolts 300mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts washers, four on bolt plate and two on staple plate complete all as specified & directed by Engineer-in- charge.
5
-
-
... More
Supply & fixing mild steel pressed handle of size 200mm, oval type stove enamelled black complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
730
-
-
... More
Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
1240
-
-
... More
Material and labour for glazed ceramic coloured tiles (light shade) 7 to 8mm thick square or rectangular , as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
700
-
-
... More
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
36
-
-
... More
Material and labour for sunken treatment to sunken floor, cleaning the surface by wire brush, rendering to floor and sides with 10mm thick in cement mortar (1:3) including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge. NOTE:- (i) WPC for mixing in CM shall be measured & paid separately as Supply only.
140
-
-
... More
Material and labour for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per Sqm on bottom and sides of plastered surfaces of sunken complete all as specified and as directed by Engineer-in-charge.
140
-
-
... More
Supply and laying polythene film, 150 micron thick, weight of film not less than 0.150 kg per sqm, laid on bitumen quoted surface complete all as specified and as directed by Engineer-in-charge.
140
-
-
... More
Material and labour for coating of WPC pidifin 2K in two coats on plastered surface finished even & smooth. 2 component (1 part polymer & 2 part powder) shall be applied after proper mixing as per manufacturer's instructions complete all as specified and as directed by Engineer-in-charge.
140
-
-
... More
Material & Labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as loose filling of sunken floors complete all as specified and as directed by Engineer-in-charge.
36
-
-
... More
Material and labour for 25mm thick cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floor, sunken floor etc, finished rough to receive tiles, complete all as specified and as directed by the Engineer-in-Charge.
110
-
-
... More
Resecuring, easing and adjustments of shutters (any description and any size of shutter exc 1 sqm and n 2 Sqm each) without taking down from chowkhat/frame including oiling, tigtening of screws, minor repairs, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc complete all as specified and as directed by Engineer-in- charge.
Note :- Screws if required for adjustment of fittings the cost of screws shall be included in the unit rate.
15
-
-
... More
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
540
-
-
... More
Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
170
-
-
... More
Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
30
-
-
... More
Supply & fixing in repair vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm with integral foot rests (excluding flushing cistern, flush pipe above floor and trap), including demolation of tile, PCC, taking out old WC, taking out lime concrete filling and after fixing new WC re filling lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including fixing PVC flush pipe upto finished floor level, joints of flush pipe and trap make leakproof and testing before filling concrete and including all other connected work as required upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engineer-in- charge.
(NOTE : Tile work with screed shall be measured and paid separately under appropriate item of this schedule.
22
-
-
... More
Supply & fixing in replacement vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply & fixing in replacement plastic water closet seat with cover (white colour) closed pattern with flat bottom/recessed bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and fixing 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC bend long type ( flush pipe) complete all as specified and directed by Engineer-in-Charge.
36
-
-
... More
Supply and fixing hand shower (health faucet) brass body with CP including 1 meter long 8mm dia flexible tube and including wall hook including taking down old any type shower complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
Supply & fixing PVC (SWR) floor trap suitable for 100/110mm bore pipe, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge.
28
-
-
... More
Supply and fixing in replacement 1200mm x 600mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Supply & fixing in repair 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
65
-
-
... More
Supply and fixing in replacement bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
70
-
-
... More
Supply and fixing in replacement stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
60
-
-
... More
Supply & fixing in repair brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug, bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.
20
-
-
... More
Supply & fixing in replacement vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe including bracket and cutting for and pinning in end of bracket or erecting including fixing only pillar tap (new or serviceable old pillar tap as per site condition ) complete all as specified and as directed by Engineer-in-Charge.
(Note :- Pillar tap if required in replacement, shall be measured & paid separately as Supply only under appropriate item of BOQ.)
22
-
-
... More
Supply & fixing in replacement vitreous china wash hand basin oval type under counter, white colour, of size 595mm x 420mm x 200mm excluding taps, but including fancy type 32mm waste coupling and waste pipe, fixing/counter sunked in granite slab, complete all as specified and as directed by Engineer-in-Charge.
Note :- Granite slab shall be measured and paid separately under appropriate item of BOQ.
4
-
-
... More
Supply & fixing in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS
20
-
-
... More
Supply and fixing corner Glass shelf with bracket including taking down old any type shelf complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
S&F in repairs CP wash hand mixture, fancy type with nut,bolt and washers of 15mm bore pipe complete, all as specified & directed by Engineer-in-charge.
8
-
-
... More
Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe up to and including 150 mm bore pipes complete all as specified and directed by Engineer-in-Charge.
20
-
-
... More
Material and labour for cement concrete (1:3:6), type C2 using 40mm graded stone aggregate as in bed of drain pipe of size 150mm bore (internal) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in- charge.
18
-
-
... More
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection including dismantling/taking down of existing unserviceable PVC water storage tanks of any description complete all as specified and as directed by Engineer-in-charge.
8
-
-
... More
Supply & fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge. Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS.
15
-
-
... More
Supply & fixing gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 25mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.
12
-
-
... More
Supply & fixing in replacement vitreous china urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling and 32mm dia waste pipe and pointing around urinal back in cement mortar, including taking down old urinal with fittings complete all as specified & directed by Engineer-in-charge.
26
-
-
... More
Dismantling cast iron drain/ PVC pipes, jointed in cement mortar of any description any dia from wall and taking out from trenches including all fittings (bend, trap, cowl, branch piece etc) and removing from the site complete all as directed by Engr-in-Charge.
110
-
-
... More
Supply & fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
55
-
-
... More
Supply & fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
35
-
-
... More
Supply & fixing PVC (SWR) floor trap suitable for 75mm bore pipe, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge.
28
-
-
... More
Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
25
-
-
... More
Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
18
-
-
... More
Supply and fixing Cast iron floor trap 100mm bore, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Supply & fixing 100mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Supply & fixing 75mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Supply & fixing 75mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with oval access door as specified & directed by Engineer-in- charge.
4
-
-
... More
Supply & fixing in replacement 110mm bore PVC (SWR) rain water pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, including dismantling/taking down old pipe complete all as specified and as directed by Engineer-in- charge.
45
-
-
... More
Supply and fixing solid PVC door frame of size 50mm x 47mm made out 5mm thick plain clour PVC sheet reinforced with MS square tube including painting of edges to match with sheet, all as specified & shown in relevant drawing of item No. 8095 in MES Schedule SSR-2010 (Part-II), fixed in opening complete all as specified and as directed by Engineer-in-Charge.
140
-
-
... More
Supply and fixing factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, door to be fixed to frame with 3 Nos extruded brass butt hinges (with S/S hinge pin) B-11 type, bright polished of size 100mm and fixing with 32mm long steel screws drilled suitable to pass through both the walls of the MS tube complete all as specified in SSR (Part-I, specifications) & shown in relevant drawing of item No. 8101 and 8103 in SSR (Part-II, rates) complete all as specified and as directed by Engineer-in-Charge.
35
-
-
... More
Supply and fixing anodised aluminium handle 'D' type 125mm long complete all as specified & directed by Engineer-in-charge.
65
-
-
... More
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified & directed by Engineer-in-charge.
55
-
-
... More
Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.
2
-
-
... More
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down and preparing the surfaces smooth and after that applying two coats of weather proof exterior emulsion paint (weather coat) of approved tint on walls over two coat of wall care putty by using paint roller brush or electric paint spray machine, as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.
NOTE : - Complete removal /scraping to old existing treatment as directed by Engineer-in-charge, each stage i.e after complete removal and before applying weather coats as specified above, the surface shall be passed in writing by the Enigineer-in-charge.
746
-
-
... More
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions to make the surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of lime white wash with paint brush complete all as specified and as directed by Engineer-in-Charge.
200
-
-
... More
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down and preparing the surfaces smooth by applying chalk whitening, preparatory to distempering and after prepare the surface smooth applying two coats of oil bound distemper (washable) as per approved tint/colour by using paint brush or roller brush complete all as specified and as directed by Engineer-in-Charge.
NOTE : - Each stage i.e after complete removal and before applying OBD as specified above, the surface shall be passed in writing by the Enigineer-in-charge.
580
-
-
... More
Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-charge
1
-
-
... More
Material and labour for reinforced cement concrete (1:2:4) (nominal mix) type B-0 using 12.5 mm graded stone aggregate as in chajjas, beams, staircases, landing, fins, facia and similar suspended works complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
1
-
-
... More
Material and labour for mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
100
-
-
... More
Form work to chullah hoods, chajjas, trough and similar items including edges rough finished flat surfaces complete all as specified & directed by Engineer-in- charge.
36
-
-
... More
E/M Works
-
-
-
... More
Taking down carefully unserviceable copper / aluminum point wiring (light, fan, socket) complete including existing conduit pipes and removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.
174
-
-
... More
Material and labour for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) 1100 volts in existing concealed/surface conduit and existing sunken box covered with new 3 mm thick bakelite laminated hylam sheet (ISI marked) for one light point /fan point/exhaust fan controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly complete all as specified.
Note :- Switches and socket outlet to be measured and paid for separately.
147
-
-
... More
All as item No 154 here in before but for one socket outlet 5 pin 5/6 Amps 250 Volts flush type on same board complete all as specified & directed
15
-
-
... More
All as item No 154 here in before but for one socket outlet 5 pin 5/6 Amps 250 Volts flush type on Independent board but not below the swtich board complete all as specified and directed
21
-
-
... More
All as item No 154 here in before but for one socket outlet 6 pin, 6/16 Amps, 2 in 1 with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on independent board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc
26
-
-
... More
Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps complete all as specified
163
-
-
... More
Supply and fixing switch piano flush type, single pole, one way, 15/16 Amps complete all as specified
24
-
-
... More
Supply and fixing socket outlet multipurpose with frame cover 2 in 1, 5 pin, 5/6 Amps, flush type complete all as specified
36
-
-
... More
Supply and fixing socket outlet multipurpose with frame cover 2 in 1, 5 pin, 15/16 Amps, flush type complete all as specified
24
-
-
... More
Supply and fixing ceiling rose surface type polycarbonate, isolated body two to three terminal, tpline series 20 x 50mm, 6 Amps, three terminal complete all as specified.
139
-
-
... More
S&F in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and as directed by Engineer-in-Charge.
80
-
-
... More
Supply and fixing in replacement of light fitting of 9/10 watt, 6000 K , linear & compact with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector all as specified and directed.
24
-
-
... More
Supply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed by Engineer-in-Charge.
4
-
-
... More
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed by Engineer-in-Charge.
6
-
-
... More
Supply and fixing in replacement sub main wiring complete with two single core 4 sqmm, 1100 volts grade PVC insulated, multistranded copper conductor FRLSH cable in and existing PVC concealed conduit (medium quality ISI marked) and cutting of chases in wall including 4 sqmm single core copper earth wire to common earth and connecting to earth dolly complete all as specified. Note :- Three runs of cable and one run of conduit shall be measured as one unit.
600
-
-
... More
Supply and fixing sub main wiring complete with two single core 4 sqmm, 1100 volts grade PVC insulated, multistranded copper conductor FRLSH cable in and new PVC concealed conduit (medium quality ISI marked) and cutting of chases in wall including 4 sqmm single core copper earth wire to common earth and connecting to earth dolly complete all as specified. Note :- Three runs of cable and one run of conduit shall be measured as one unit.
35
-
-
... More
Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 12 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
1
-
-
... More
Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
12
-
-
... More
Supply and fixing MCB SP 6 to 32 Amps 240, 10 KA B curve complete all as specified and directed
82
-
-
... More
Supply and fixing MCB SPN 32 Amps 240, 10 KA B curve complete all as specified and directed
1
-
-
... More
Supply and fixing of (concealed in wall or as directed) single pole and neutral sheet metal enclosure (geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply, complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
Making holes for 250 mm dia exhaust fan of suitable shape & size into or through brick walls at ground/First/second floor including plastering for making good to the original surfaces of any description disturbed including painting/distemper matching with the existing colour.
Note :- Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.
24
-
-
... More
Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at ground/First/second floor including plastering for making good to the original surfaces of any description disturbed including painting/distemper matching with the existing colour.
Note :- Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.
1
-
-
... More
Supply and fixing of exhaust fan steel body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account
25
-
-
... More
Supply and fixing of storage type water heater (Geyser) electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of Gyeser and 'GE North BTD' shall also be writing on Gyeser with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Gyeser installed at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.
13
-
-
... More
M & L for fixing of 4 Nos rawl plug of suitable size (4"-6") nuts & bolts, grouting work in RCC/Brick wall, cemented works labour charges for cutting to exisiting GI pipe line of size 15 mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittngs, plumbing work all as per site requirement.
13
-
-
... More
Supply and fixing of (concealed in wall or as directed) single pole and neutral sheet metal enclosure (geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply, complete all as specified and directed by Engineer-in-Charge.
13
-
-
... More
Supply and fixing/laying GI tubing, medium grade, 15 mm bore for protection of cable or earthing lead wire under hardstanding/fixed along poles/wall, laid in in trenches etc including taking out old UNSV pipe complete all as specified and as directed by Engineer-in-Charge.
22
-
-
... More
Supply & fixing 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
25
-
-
... More
Supply & fixing bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
13
-
-
... More
Labour for cutting to existing GI pipe of size 25/20 mm dia in position for addition/alteration or insertion of TEE for branch connection complete with cutting, threading and jointing/ fixing including GI fitting as per site requirement complete all as specified & directed by Engineer-in-charge.
13
-
-
... More
Supply and fixing lamp holder PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified & directed by Engineer-in-charge.
4
-
-
... More
Supply and fixing of self ballast LED retrofit lamp with PVC body and PC diffuser 9 watt 230 volt 6500k complete all as specified & directed by Engineer-in-charge.
4
-
-
... More
Supply and fixing switch 15/16 with suitable module type, internal plates and frame cover and its connected acessories complete all as specified
2
-
-
... More
Supply and fixing socket outlet multipurpose , 2 in 1, 5 pin, 15/16 Amps in suitable modular type complete all as specified
2
-
-
... More
Supply and fixing of BLDC (Brushless direct current motor) ceiling fan 5 star rated, complete with blades, down rods, and accessories, 230 Volts, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, including electrical connection providing twin core round copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge.
Note :- (i) Srl Number of ceiling fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Ceiling fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.
4
-
-
... More
Material and labour for sand filling in trenches including watering and consolidation complete all as specified and directed by Engr in charge.
3
-
-
... More
Material and labour for sub class "B" brick laid in trenches for cable protection and laid perpendicular to the length of cable.
348
-
-
... More
Supply, laying & testing in trenches, along poles/ walls LT cable XLPE insulated armoured, heavy duty electric cable, 1100 volts grade, cross sectional area 16 sqmm 2 core from trenches/ along poles/ walls complete all as directed. Note :- Excavation& earth work, sand cushioning and brick protection shall be measured and paid for separately.
70
-
-
... More
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements