Military Engineer Services Tender

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified & directed by Engr-in-Charge

M&L for brick work with old size fly ash bricks, straight or covered or plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge

All as per item No 5.00 here-in-before but except bricks

M&L for Reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm graded aggregate) with mixing of suitable URP as bonding agent in Well staining and well curbs upto the depth of 5mtr including draining out of water by suitable pumps complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends or welding into the existing bars and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Taking down cement plaster from ceilings & brick walls including wall tiles / terrazzo / kota stone etc. any type of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-In-Charge.

M&L for Rendering 15mm thick in cement mortar 1:3 on any face of brick walls or concrete surfaces of wells, static water tanks upto depth of 5.00 mtr, finished even and smooth without using extra cement with water proofing compound used for water retaining structures complete all as specified & directed by Engr-In-Charge. Note : WPC will be measured and paid separately

M&L for Rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed by Engr-In-Charge. Note : WPC will be measured and paid separately

M&L for Rendering 15mm thick in cement mortar 1:6 on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed by Engr-In Charge.

M&L for 10 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.

Supply only Integral water proofing compound complete all as specified

M&L for Preparation of newly plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specified & directed by Engr-In-Charge.

M&L for Preparation of old plastered surfaces of walls including Washing, rubbing down and stopping of distempered and painted surfaces complete etc., and applying two coats of cement base paint (in existing camouflage pattern) complete all as specified & directed by Engr-In-Charge

M&L for Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over chalk whitening complete all as specified & directed by Engr-In-Charge.

M&L for Preparation of old plastered surfaces of walls including Washing, rubbing down and stopping of distempered and painted surfaces complete & applying two coats of oil bound distemper over chalk whitening complete all as specified & directed by Engr-In-Charge.

M&L for Preparation of newly plastered surfaces of walls etc., and applying two coats of white wash complete all as specified & directed by Engr-In-Charge.

M&L for Preparation of new plastered surfaces and applying two coats of white wash on ceiling as specified & directed by Engr-In-Charge.

M&L for applying two coat of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth after preparation of surfaces complete all as specified and directed by Engr-In-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.

M&L for premium quality glazed ceramic tile of size 600mmx300mm of thickness 7-8mm, with water absorption between 10% to 20% pasted with tile adhesive and epoxy grouted with same make as of tile complete all as specified & directed by Engr-in-Charge.

M&L for premium quality non-skid ceramic tile of size 400mmx400mm of thickness 7-8mm, with water absorption between 3% to 6% pasted with tile adhesive and epoxy grouted with same make as of tile complete all as specified & directed by Engr-in-Charge.

M&L in repair for 25mm dia PVC coated MS Pipe coloured curtain rod including brackets and knobs at both ends as per site requirement and taking down the old existing curtain rods any description with accessories complete all as specified and directed

Taking down of chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified.

Taking down of chowkats or frames exc 1.5 Sqm but n.exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified

M&L for PCC 1:3:6 type B0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork complete all as specified and directed by Engr-in-Charge

S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated all as specified and directed

S&F 2nd class hardwood glazed skeleton shutters 35 mm thick open rebated and prepared to receive gauge etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified & directed by Engr-in-Charge

S&F Factory made box type Steel windows with side hung shutters including pintol hinges with steel handle, 2 Nos 150mm MS tower bolts on each shutter and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge

S&F Factory made box type Steel windows with side hung shutters including pintol hinges with steel handle, 2 Nos 150mm MS tower bolts on each shutter and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge

S&F sheet glass of 4mm,ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane, complete all as specified

S&F Mild steel box type ventilator fixed type complete with sash bars dovetailed or welded and with shop coat of zinc chromate primer ready for wire mesh/glass pan fixing complete all as specified and directed.

M&L for mild steel framed work of Fe-290 (Gde E-165) as in grills/guard bars shouldered with steel windows/ventilators frames. Cooler stand, ladder etc including red oxide primer coat complete all as specified

S&F in repair 300mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150 mm long Aluminium handles cast type anodised complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasps staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F Galvalnised Mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified

S&F in repair sheet glass of 4mm, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane, complete all as specified

M&L for preparation of new or previously untreated surface of wood or wooden based surface any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for preparation of old painted steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed, all as specified

M&L for PCC 1:2:4 type B0 using (using 12.5 mm graded aggregate) as in roof kerbs complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10 mm thick in cement plaster 1:4 with WPC on roof, fair faces of brick work or concrete surfaces all as specified and directed by Engr-in-charge. Note : WPC will be measured and paid separately

M&L for Roof Treatment in patches as specified below and as directed : (a) M&L for 50mmthick PCC 1:2:4 type B1 (20mm graded aggregate) in roof with approved water proofing compound in proportion as recommended by manufacturer. (b) Surface Preparation . Cleaning the screed surface to make it laitance, dust and sludge free, removing any extended portion by grinding using suitable equipments and providing basic repair including filling of any cracks or pot holes with sika latex mortar modifier. (c) Joint Sealing and detailing . Providing and applying sika reemat premium at all detailing areas. (d) Epoxy Primer. Providing and applying Sikalastic-10 Primer EP, 2 part, and solvent free, low viscous epoxy based primer applied at consumption of 0.2 Kg/Sqm. The primer must have a compressive strength60N/Sqmm and flexural strength 30NSqmm. (e) Waterproofing and cool roof coating. Providing and applying Sikalastic-590 IN, single component, flexible, liquid applied UV and weather resistant, polyuethane waterproofing membrane with high reflective orioerties. The waterproofing membrane must have following properties:- (i) Tensile strength 1.5N/Sqmm according to ASTM D412 (ii) Elongation at break250 according to ASTM D412 (iii) The liquid membrane must be resistant to growth of algae and fungi and have high SRI of 106 with reflectivity 84% according to green bldg reqmts. (iv) The waterproofing membrane must be applied in three coat of SIKALASTIC-590 IN applied at consumption of 0.5Kg/Sqm each coat. (v) The roofing system should be compatible with bitumen Note : (i) Make of all the product for above treatment - SIKA or TECHNO commercial equivalent make approved by GE in writing in make mention in Appx 'B' or from E-in-C approved list. (ii) All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of System. (iii) The application must be done with necessary detailing as per manufacturer method statement. (iv) The manufacturer must be an ISO 9001 and 14001 certified and valid certificate must be produced as prove

S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified

M&L in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws as specified complete all as specified and directed

M&L in repair Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L in repair Mild steel plates (Fe 410-W (Gde-E- 250) quality- A, plain or chequered, 5mm thick or over in thickness in available sizes fixed to existing steel members by welding upto height of 15m from GL including all necessary arrangements complete all as specified and directed.