Military Engineer Services Tender

Material and Labour for Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing crack mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/ tack coat with paving bitumen VG-10 at the rate of 10kg per 10 Sqm of road surface. Complete all as specified & directed by Engineer-in-Charge.

M & L for Premix bituminous macadam laid, rolled and compacted to requiredgradient and camber (Consolidation thickness 75mm or less) with paving bitumen VG-30 any penetration @ 4% by weight of total mix laid rolled and compacted to required camber and gradint with 8 to 10 tonne power road roller.Complete all as specified & directed by Engineer-in-Charge.

M&L for preparing existing black top surfaces by brushig with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surfces with gunny bags to remove all loose dirt and applying evenly a priming/ tack coat with paving bitumen VG-10 at the rate of 5 KG per 10 Sqm of road surface, laying, rolling, consolidating 30mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content (VG-30) by weight of total mix laid wiht mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller. Complete all as specified & directed by Engineer-in-Charge. Note : Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roadspavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction and accordance with manufacturers specifications. Make of paint :- 3M/VERTEX/JCC. Complete all as specified & directed by Engineer-in-Charge.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions specified and as directed by Engineer-in-Charge. Make : Greenlite/3M or equivalent. Complete all as specified & directed by Engineer-in-Charge.

M&L continuous brick edging with Burnt clay bricks of Sub class 'B bricks laid dry end vertically with width is equql to width of the brick and embedded brick in the ground to depth and tempering ground around bricks and removing surplus soil. Complete all as specified & directed by Engineer-in-Charge.