Military Engineer Services Tender

M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured

Supplying and laying un-reinforced precast concrete cable cover, class LV, type -II, flat Peak, size 300 mm x 180mm x 40mm complete all as directed by Engr - in charge

Supplying and laying un-reinforced precast concrete cable cover, class LV, type -I, flat peak, size 250 mm x 150mm x 40mm complete all as directed by Engr - in charge

Taking out different sizes of XLPE LT cable complete all as directed by Engr-in-Charge.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 10 Sqmm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 16 Sqmm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 25 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 35 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 50 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 70 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 95 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 120 sq mm.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a) Aluminium bus bar cap 200 Amp-04 (b) MCCB 415 V , 100 A four pole with thermal magnetic release adjustable type with breaking capacity 16 KA ( incoming ) - 01 (c) MCCB 415 V , 63A , 4 pole with breaking capacity , 16 KA ( outgoing) - 03 (d) MCCB 415 V , 32 A , 4 pole with breaking capacity 16 KA ( outgoing)-01 (d) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 (e) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-400 Amps with selector switch with CT - 01 (f) RYB LED indicating lamp set of three- 01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a)Aluminium bus bar cap 400 Amp-04 (b) MCCB 4 pole 415 V adjustable type 200 A breaking capacity 36 KA ( incoming) -01 (c) MCCB 4 pole 415 V ,160 A with breaking capacity 36 KA ( outgoing ) -02 (d) MCCB 4 pole 415 V , 100A with breaking capacity 16 KA ( outgoing) - 01 (e) MCCB 4 pole 415 V ,63 A with breaking capacity 16 KA ( outgoing)- 04 (f) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 (g) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-400 Amps with selector switch with CT - 01 (f) RYB LED indicating lamp set of three- 01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following. (a) Aluminium bus bar cap 400 Amp-04 (b) MCCB 4 pole 415 V ,200 A with breaking capacity 36 KA ( incoming) -01 (c) MCCB 4 pole 415 V ,100 A with breaking capacity 16 KA ( outgoing)-02 (d)MCCB 4 pole 415 V ,63A with breaking capacity 16 KA ( outgoing)- 04 (e ) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 (f) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-400 Amps with selector switch with CT - 01 (g) RYB LED indicating lamp set of three- 01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a) Aluminium bus bar cap 400 Amp- 04 (b) MCCB 4 pole 415 V, 200 A with breaking capcity 36 KA ( incoming)- 01 (c) MCCB 4 pole 415 V ,100 A with breaking capacity 16 KA ( outgoing)- 03 (d) MCCB 4 pole 415 V ,63 A with breaking capacity 16 KA ( outgoing)-02 (e) Digital voltmeter -96 x96 mm flush secure panel mounting type 0-500 V with selector switch-01 (f) Digital Amp meter 96mm x 96 mm flush secure panel mounting type 0-400 Amps with selector switch with CT-01 (g) RYB LED indicating lamp set of three-01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure

M&L 150mm thick PCC 1:2:4 typeB- 2, (40mm graded aggregate) as in flooring all as specified and directed.

supply and fixing LT cable route indicator made of cast iron material of 100 mm dia round with 5-6 mm thick with arrow for direction indication with complete paint of whole plate and 3 mm thick endorsed letter showing LT cable complete all as specified and directed by Engr-in -Charge.

M & L for repair and panel door of existing LT panels by replacing the hinges and locks with existing size by means of welding and making good by painting with existing color all as specified and directed by Engr-in-charge.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a) Aluminium bus bar cap 150 Amp- 04 (b) MCCB 4 pole 415 V, 100 A with breaking capcity 16 KA ( incoming)- 01 (c) MCCB 4 pole 415 V ,63 A with breaking capacity 16 KA ( outgoing)- 03 (d) MCCB 4 pole 415 V ,40 A with breaking capacity 16 KA ( outgoing)-01 (e) Digital voltmeter -96 x96 mm flush secure panel mounting type 0-500 V with selector switch-01 (f) Digital Amp meter 96mm x 96 mm flush secure panel mounting type 0-400 Amps with selector switch with CT-01 (g) RYB LED indicating lamp set of three-01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a) Aluminium bus bar cap 150 Amp- 04 (b) MCCB 4 pole 415 V, 100 A with breaking capcity 16 KA ( incoming)- 01 (c) MCCB 4 pole 415 V ,63 A with breaking capacity 16 KA ( outgoing)- 03 (d) MCCB 4 pole 415 V ,40 A with breaking capacity 16 KA ( outgoing)-01 (e) Digital voltmeter -96 x96 mm flush secure panel mounting type 0-500 V with selector switch-01 (f) Digital Amp meter 96mm x 96 mm flush secure panel mounting type 0-400 Amps with selector switch with CT-01 (g) RYB LED indicating lamp set of three-01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a) Aluminium bus bar cap 150 Amp- 04 (b) MCCB 4 pole 415 V, 100 A with breaking capcity 16 KA ( incoming)- 01 (c) MCCB 4 pole 415 V ,63 A with breaking capacity 16 KA ( outgoing)- 03 (d) MCCB 4 pole 415 V ,40 A with breaking capacity 16 KA ( outgoing)-01 (e) Digital voltmeter -96 x96 mm flush secure panel mounting type 0-500 V with selector switch-01 (f) Digital Amp meter 96mm x 96 mm flush secure panel mounting type 0-400 Amps with selector switch with CT-01 (g) RYB LED indicating lamp set of three-01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.