Military Engineer Services Tender

M&L for subsequent coat of distemper oil emulsion (white /ivory / tinted or any colour ) over one coat applied under Srl item No 3 above

M&L for applying one coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : old plaster surface (one coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on wooden surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

Description all as per Item No 7.00 but one coat of synthetic enamel paint on steel surfaces complete all as spd and directed.

M&L for Applying 1 mm thick wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed. Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services.

M&L for 15mm thick cement plaster in cement motar 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed. incl WPC @ 200ML per 50kg cement bag or as manufacture instruction Note-WPC will be measured and paid separately under appropriate items

M&L for 15mm thick cement plaster in cement motar (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed

M&L for 10 mm thick cement plaster in cement motar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed

Supply only water proofing compound complete all as specified.

M&L for applying two coat of oil bound distemper including preparation of newly plasterd surfaces of walls, pillars cornces etc complete all as specified and directed.

M&L for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars cornces etc complete all as specified and directed.

Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : New surface work (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

M&L for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, with chicken wire mesh and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed.

M&L for preparation for old concrete ,brick curve stone , asbestos cement for Surfaces and applying two coats of synthetic enamel paint any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

S&F 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality incl stainless steel stud (size of board , design of bd , type of print on sheet , size of stud not less than 35mm x 22mm dia, samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL complete all as specified and directed incl dismantling of existing damaged / rusted sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70 kg per sqm. Stainless steel of grade A-ISI 304(1818) complete all as specified and directed.

M&L for complete removal and scrapping down with burshes washing with water to external surfaces of RCC overhead tank at any height and filling cracks with white cement and applying two coats of weather proof exterior emulsion paint complete all as per specified and directed. Make Asian /Burger/Joshon /Salimar Note : (i) Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 25 mtr etc. complete as per specification and directed by GE (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 3 mtr shall be mandatary and deemed to be inclusive in quoted rates. complete all as specified and directed.

Dismantling / taking down old existing unserviceable cement plaster, loose / unsound weaken cement concrete of any description and in any position from existing external / internal surfaces of RCC OHT/sump/ wall / roof / beams / columns / RCC , average depth 25mm (at any staging) with power driven of pneumatic chisel and disposal of unservicable material debris and rubbish outside MD land at a place as specified by local bodies including cutting of all edges, making square shoulders of the cavities, roughening the smooth surfaces, scrapping out / removing corrosion all loose / scale / rust etc from the visible reinforcement by applying rust remover or approved make equivalent the steel reinforcemnt properly and then applying single component cementitious corrosion inhibiting primer for steel reinforcement emco system/Webac chemicals on visible reiforcement all as specified and directed. Note : (i) Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 25 mtr etc. complete as per specification and directed by GE . (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 3 mtr shall be mandatary and deemed to be inclusive in quoted rates. (iii) any Capacity complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar 1:3 on fair faces with using Pidiproof LW + (special formulated liquid water proofing compound composed of surface active plasting agents polymer addities uisng reinforced polymer modified repair mortar) of plaster and concrete to achieve Compressive strength of 15 N/mm2 in 1 Day ,25 N/mm2 in 3 Days ,adhesion bond strength of 2 N/mm2 as per IS 2645-2003 and unsing 200ml in 50kg cement , finished the surface even and smooth all as specified and directed. Note : (i) Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding with steel props and working upto height 25 mtr etc. complete as per specification and directed by GE (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 3 mtr shall be mandatary and deemed to be inclusive in quoted rates Ridge road Capacity complete all as specified and directed.