Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 1,50,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_658642_2Tender No
CWE BTD/TOKEN-64/2023-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified & directed by Engineer-in-charge.
60
-
-
Supply and fixing 100mm long powder coated mild steel butt hinges medium weight cold rolled complete all as specified & directed by Engineer-in-charge.
126
-
-
Supply and fixing anodised aluminium handle cast type 125mm long complete all as specified & directed by Engineer-in-charge.
86
-
-
Taking down chowkhats or frames with shutters of wooden door shutters and wooden window shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each complete all as specified and as directed by Engineer-in- charge.
12
-
-
Supply and fixing Pressed steel frames for doors with one or more rebates with and including including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm,with and including one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.2. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
30
-
-
Supply and fixing Pressed steel frames for doors with one or more rebates with and including including hinges, lock strike plate, fixing lugs, etc., size of frame 105mm x 60mm,with and including one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.2. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
20
-
-
Material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate in filling back of Pressed steel frames chowkats/frame and in bed blocks to hold fast complete all as specified and directed by EIC
1.15
-
-
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
38.4
-
-
Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass shall be measured and paid separately.Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
26.5
-
-
Supply & fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
30
-
-
Supply & fixing in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
20
-
-
Supply & fixing 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge.
25
-
-
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified & directed by Engineer-in-charge.
66
-
-
Supply & fixing aluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
18
-
-
Supply and fixing MS pressed handle oval type, stove enammelled black size 150mm long complete all as specified & directed by Engineer-in-charge.
98
-
-
Supply and fixing in repair floor door Stopper (150mm overall length of cover plate) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed.
40
-
-
Supply & fixing in replacment factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with and including one shop coat of zinc chromate primer without glazing bars including making good as per existing surfaces complete all as specified & as directed by Engineer-in- charge.Note: The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
15
-
-
Supply & fixing in replacment factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with and including one shop coat of zinc chromate primer with glazing bars including making good as per existing surfaces complete all as specified & as directed by Engineer-in- charge.Note: The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
15
-
-
Supply & fixing in replacment factory made steel venitlator confirming to IS 1038 fixed type, with steel handle, steel peg stay, complete, dovetailed welded, with and including one shop coat of zinc chromate primer with glazing bars including making good as per existing surfaces complete all as specified & as directed by Engineer-in- charge.Note: The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
10.5
-
-
Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones with oil putty complete all as specified and directed
9
-
-
Supply only 3.00 mm thick Sheet glass ordinary quality ,fixing with oil putty to wooden or steel surface n.exc 0.5 sqm each complete all as specified and directed
30
-
-
Supply & fixing 3 mm thick Figured glass pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed
8
-
-
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified & directed by Engineer-in- charge.
132
-
-
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.
70
-
-
Material and labour for Preparation of New wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge.
218
-
-
Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.
80
-
-
Demolition of lime concrete in ground floor, first floor, sunken portion and paving at any thickness below or above floor level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
6
-
-
Blank
-
-
-
Material and labour for sunken treatment to sunken floor, cleaning the surface by wire brush, rendering to floor and sides with 10mm thick in cement mortar (1:3) including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement, after that material & labour providing two coat of two components (one part liquid two part powder) ready to use cementitious water proofing coating on properly prepared surface by brushing having elongation of 50% for the applying water proofing treatment on horizontal and vertical surfaces of sunken floor, complete all as specified and as directed by Engineer-in-charge. NOTE:- (i) Applying 1st coat of two components modified polymer coating.
(ii) Provn of glass fiber mess of 2mm x 2mm immediately on alone coating.
(iii) Apply 2nd coat of two components modified polymer coating after 72 Hrs on horizontal and vertical surfaces.
40
-
-
Material and labour for 30mm thick cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floor, sunken floor etc, finished rough to receive tiles, including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, complete all as specified and as directed by the Engineer-in-Charge. (Note :- liquid WPC shall be measured & paid separately as Supply only)
40
-
-
Material & Labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as loose filling of sunken floors complete all as specified and as directed by Engineer-in-charge.
6
-
-
Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
670
-
-
Roughning of surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc
1640
-
-
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
220
-
-
Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm/450mm x 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
500
-
-
Material and labour for Non Skid ceramic coloured tiles (Light shade ) 10 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
1112
-
-
Material and labour for Non Skid ceramic coloured tiles (light shade) 10mm thick square or rectangular (same as floor tile, as per above item ), as in skirting, dado etc. set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
60
-
-
Material and Labour for 20-25 mm thick Kota stone slab as approved by GE flooring, mirror polished laid over 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge.
590
-
-
Material and Labour for machine cut kota stone slab as approved by GE as in vertical surfaces, 20-25 mm thick laid over and including 10 mm thick rendering in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge.
25
-
-
Supply & fixing 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified and as directed by Engineer-in-charge.
61
-
-
Supply and fixing in replacement stop valve/angle valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge.
60
-
-
Supply & fixing in replacement chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
8
-
-
Supply and fixing in replacement concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge.
8
-
-
Supply & fixing in replacement brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.
10
-
-
Supply & fixing in replacement Chromium Plated, soap tray size not less than 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge
10
-
-
Supply and fixing in replacement 15mm bore Bib tap long body cast copper alloy, chromium plated fancy type, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
30
-
-
Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including PVC frame alround made of PVC channel, complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply and fixing 1200mm x 600mm size bevelled edge mirror selected quality 6mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge.
4
-
-
Supply and fixing 19mm internal dia MS pipe with PVC coated drapery rod (Curtain Rod) of approved make including fenials and brackets for door and window including taking down old curtain rod and palmet box complete all as specified and directed by Engr-in-Charge
150
-
-
Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
100
-
-
Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
80
-
-
Taking up or down existing galvanised steel water tubing (GI pipe) 25mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
30
-
-
Supply and fixing or laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as specified and as directed by Engineer-in- charge.
100
-
-
Supply and fixing or laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as specified and as directed by Engineer-in- charge.
80
-
-
Supply and fixing or laying of 30mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as specified and as directed by Engineer-in- charge.
30
-
-
Material and Labour in repairs Oval type vitreous china wash basin 550mm x 400mm, white, including 32mm chromium plated waste coupling and PVC waste pipe & fixing in granite slab complete all as specified and directed by Engr-in-Charge
Note : Granite shall be measured and paid separately.
12
-
-
Material and Labour in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe including, supply & fixing of pillar tap, bracket and cutting for and pinning in end of bracket or erecting complete all as specified and as directed by Engineer-in-Charge.
2
-
-
Material and Labour in repairs vitreous china urinal of size 410mm x 380mm x 950mm, half stall type white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe ) including CP urinal spreader and CP connection and waste pipe complete all as specified and directed.
6
-
-
Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50mm x 5mm and 16mm dia round iron stay (at the interval of 1.00mtr ) including nut bolt and PCC work, complete all as specified and as directed by Engineer-in- charge.
130
-
-
Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
24
-
-
Supply & fixing in replacement Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply & fixing in repair vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests and CI 'P' or 'S' trap (excluding flushing cistern, flush pipe above floor), including demolation of tile, PCC, taking out mass concrete filling and re filling PCC (1:7:12) type F2 after fixing of WC and trap with proper joints leakproof including PVC flush pipe upto finished floor level, and making good with 30mm thick cement concrete (1:2:4) type B0 finished rough as a sub base to recieved tile work and including all other connected work as required upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engineer-in- charge. (NOTE : Tile work with screed and Sunken floor water proofing treatment shall be measured and paid separately under appropriate item of this schedule.
18
-
-
Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
3
-
-
Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.
21
-
-
Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, laid on floor/trenches and jointing with cement mortar/lead joint as speicified and directed, including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
20
-
-
Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50mm x 5mm and 16mm dia round iron stay and jointing with cement mortar/lead joint as speicified and directed, including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
30
-
-
Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, laid on floor/trenches and jointing with cement mortar/lead joint as speicified and directed, including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
30
-
-
Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50mm x 5mm and 16mm dia round iron stay and jointing with cement mortar/lead joint as speicified and directed, including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
20
-
-
Supply and Fixing 100mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and as directed by Engineer-in- charge.
4
-
-
Supply & fixing 100mm bore cast iron Bends (any radius) with duck's foot or heel rest with oval access door fixed with cement mortar/lead joint as speicified and directed, joints complete all as specified and as directed by Engineer-in- charge.
4
-
-
Supply & fixing 100mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge.
3
-
-
Supply & fixing 100mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted without oval access door as specified & directed by Engineer-in- charge.
4
-
-
Supply and fixing 150mm x 150mm size salt glazed stone ware gully traps, square or round mouthed, type 'P' complete all as specified and as directed by Engineer-in- charge.
2
-
-
Supply & fixing in replacement 75mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement mortar /lead joint as speicified and directed, complete all as specified and as directed by Engineer-in- charge.
2
-
-
Supply & fixing 75mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) without oval access door fixed with cement mortar /lead joint as speicified and directed, complete all as specified and as directed by Engineer-in- charge.
4
-
-
Supply & fixing 75mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge.
3
-
-
Supply & fixing in replacement 75mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with oval access door as specified & directed by Engineer-in- charge.
4
-
-
Material & Labour for 75 mm dia cast iron floor trap with CP grating including jointing to waste pipe with solvent fixed in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including taking out old floor trap complete all as specified and directed by Engineer-in-Charge.
12
-
-
Dismantling brick/PCC terracing tiles single layer in roof laid and pointed in cement mortar and removing/disposal off from the site complete all as specified and as directed by Engineer-in-charge.
610
-
-
Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing/cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.
49
-
-
Material and Labour for Roughening surfaces of existing concrete surfaces of roof by picking , sweeping , clean and washing down with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified and directed by Engineer-in-charge. Note: The rate of neat cement slurry @ 3.0 Kg of cement per Sqm is included in this item and nothing shall be paid extra on this account.
650
-
-
Material and labour for cement concrete (1:2:4) type B-0, using 12.50 mm graded stone aggregates as in roof padding including mixing with Water Proof Compound as per manufacturer's instructions and finished even and fair complete all as specified and as directed by Engineeer-in-charge.
Note :- Water Proof Compound shall be measured and paid for separately under respective item of Schedule'A' BoQ..
42
-
-
Material and labour for cleaning top surface of concrete roof slab, lime terracing, or surface of tiles, with wire brush including flashing and junction of parapets etc. and surface painting with layer of blown grade bitumen of any penetration applied hot @ 1.70 Kg per Sqm and 15mm thick screed /rendering in cement mortar (1:6), priming the surface @ 0.30 Kg per Sqm and laying 3mm thick APP based polymer membrane of weighing not less than 3.5 Kg per Sqm reinforced with polyster non woven fabric (weight not less than 150 Gm per Sqm) laid on primed surface at by torch application with side overlap 75mm and end overlap 100mm and tucked into the chasesas a treatment for moderate condition complete all as specified and as directed by the Engineer-in-Charge.
715
-
-
Material and labour for PCC (1:2:4) Type B0 using 12.5mm graded stone aggregate as in roof kerb (golla) mud stops, side of roof sheet & similar work etc rounded or chamfered on edges including necessary form work etc complete all as specified and directed by Engineer-in-Charge.
5
-
-
Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
1550
-
-
Material and labour for rendering/plastering 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
400
-
-
Material and labour for rendering/plastering 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
500
-
-
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces (external surface), finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
650
-
-
Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge.
13
-
-
Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
13
-
-
Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
132
-
-
Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
2
-
-
Material and labour for RCC 1:2:4 , Type B0 , using 12.5mm graded stone aggregates Nominal Mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
1
-
-
Material and labour for RCC 1:2:4 , Type B0 , using 12.5mm graded stone aggregates as in fins, fascias, louvers, parapets, and railings exc. 60cm in height, balustrade, and the like complete all as specified and directed. . NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
1
-
-
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) on rough finished flat surfaces of concrete complete all as specified and directed by Engr-in-Charge
83
-
-
Material and labour for Formwork to sides and soffits of fins, louvers, fascia on rough finished flat surfaces of concrete complete all as specified complete all as specified and directed by Engr-in-Charge
15
-
-
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.
2780
-
-
Material and labour for Mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
10
-
-
Supply and fixing in replacement three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and Fixing in replacement Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.
6
-
-
Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces and applying two coat of white wash with (paint brush /with roller ) complete all as specified & directed by Engineer-in- charge
400
-
-
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying 2mm thick wall care putty to make the surface smooth and glossy upto the entire satisfaction of Engineer -in-Charge and after reparing the surface smooth applying two coat of white wash with paint brush/roller only complete all as specified and as directed by Engineer-in-Charge.
1300
-
-
Material and labour for preparation of New plastered/ concrete surface of wall/Pillars/cornices and applying 2mm thick wall care putty to complete surface of wall to make the surface smooth and even by using sander Machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and applying two coats of oil emulsion paint (with roller brush ) complete all as specified and as directed by Engineer-in-Charge
500
-
-
Matterial and labour for complete removal of existing treatment (any layers of existing treatment) and efflorescence from Old decorated surface of wall/pillars/cornices by scraping down with using Mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and applying 2mm thick wall care putty to complete surface of wall to make the surface even and smooth by using sander Machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and appplying two coat of oil emulsion paint (with roller brush only) complete all as specified and directed by Engineer-in-Charge
2550
-
-
Material and labour for preparation of Newly plastered/ concrete surface of wall/Pillars/cornices and applying 2mm thick wall care putty to complete surface of wall to make the surface even and smooth by using sander Machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and applying two coats of acrylic smooth emulsion paint (exterior), as approved tint/colour by using paint roller brush complete all as specified and directed by Engr-in-Charge
650
-
-
Material and labour for complete removal of existing treatment (any layers of existing treatment ) effloresence from old decorated surface of wall/pillars/cormices by scraping down with using Mechanical sander machine( including provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and applying 2mm thick wall care putty to complete surface of wall to make the surface even and smooth by using sander Machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and applying two coats of acrylic smooth emulsion paint (exterior) as approved tint/colour by using paint roller brush only complete all as specified and directed by Engr-in-Charge
650
-
-
Supply & Fixing 4mm GI Wire for laying mosquito nets in ORs line, fixing with angle and necessary fitting complete all as specified and directed by Engr-in-charge
100
-
-
Material & Labour for Taking down cement plaster , rough cast plastering including 15 mm thick rendering in cement plaster 1 :4 complete as specified in SSR Part-I clause 14.22 as after applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even.The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered with and including applying two coats of cement based paint over a coat of appropriate primer all as specified and as directed by the Engineer-in-Charge.
100
-
-
Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform/steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge
10
-
-
Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.
11
-
-
Demolition of cement concrete (unreinforced) in ground floor and above ground floors and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
67
-
-
Material & Labour 75mm Cement concrete 1:4:8 type , D 2, using 40mm graded stone aggregates as in sub base complete all as specified and directed by Engr-in-Charge
788
-
-
Material & Labour for Bullnosed Chequered Cement ConcreteTtiles of size 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry@3.00Kg per Sqm in floors, with grey cement and no pigment over with and including 20mm thick screed in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge
788
-
-
Supply & fixing in replacement pillar tap cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.
21
-
-
Supply & fixing in replacement Chromium Plated Grating Doom 125mm dia with/without waste hole (min weight 40gms) complete all as specified and directed
21
-
-
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cables, pipes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
144.93
-
-
Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe of 150 mm bore pipes, complete all as specified and directed by Engineer-in-Charge.
100
-
-
Material and Labour for concrete bed to drain pipes including packing under and haunching against the sides of pipe in cement concrete 1:3:6 (Type C-2) using 40mm graded stone aggregate after they are laid tested for bore of pipe 150mm including necessary form work, complete all as specified & directed.
100
-
-
Material and Labour for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM (1:1) including testing complete all as specified & directed.Note:- Excavation and earthwork shall be measured separately.
100
-
-
Material & labour for Cement Concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for foundations, fillings & mass concrete complete all as specified and as directed by Engineer-in-charge.
2
-
-
Material & labour for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for benching of manhole, coping etc. complete all as specified and as directed by Engineer-in-charge.
1
-
-
Supply and Fixing SFRC (Steel fibre Reinforcement concrete cover & frame) heavy duty HD-20, grade designation 650 mm internal diameter conforming to IS-12592, graded rectangular clear opening 700mm x 700mm, total weight of cover and frame to be not less than 182 Kg fixed in cement concrete (1:2:4) etc complete all as specified and as directed by Engineer-in- charge.
10
-
-
Returning filling in any type of soil, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm in each layer, complete all as specified & directed.
99.65
-
-
Removing excavated material as in all kind of Soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed.
42.81
-
-
Material and labour Cutting into existing manholes for connecting new drains, making good to pipe on of internal dia of pipe 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l using 20mm graded stone aggregates smooth finished, and reforming benching as required as required complete all as specified and directed by Engr-in-Charge
8
-
-
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed by Engineer-in- charge. rected.
350
-
-
Excavation over areas, not exceeding 1.5 mtr deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
25
-
-
Excavation over areas, exceeding 1.5 mtr deep and n.exc 3m deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
2
-
-
Material and labour for Cement Concrete 1:4:8, type D-2 using 40 mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
20
-
-
Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and consolidation complete all as specified and as directed by Engineer-in-charge.
15
-
-
Material and Labour for Formwork to sides of concrete foundations, footings, bases of
columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;
and similar work; vertical or to batter on rough finished flat surfaces of concrete complete all as specified and as directed.
45
-
-
Material and Labour for formwork square,reactangular or polygonal on rough finish surface to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engineer-in-charge.
68
-
-
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
55
-
-
Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
4.5
-
-
Material and labour for Brick work with sub class ‘B’ old size Fly Ash bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
30
-
-
Material and labour for Brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and as directed by Engineer-in-charge.
10
-
-
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
12
-
-
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
6
-
-
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 m span and the like etc complete all as specified and as directed. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
7
-
-
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in chajjas complete all as specified and as directed.NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
0.5
-
-
Material and labour for RCC M-25 design mix using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, Landings,balconies,canopies, deck slabs and in shelves and the like and in chajja etc complete all as specified and as directed.
NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
11
-
-
Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.
600
-
-
Material and Labour for pre-cast Cement Concrete (1:2:4) Type- B-1 , using 20mm graded stone aggregate as in manhole cover, placed in position, set in CM (1:6) complete all as specified & directed. Note- Reinforcement shall be measured and paid seperately.
0.3
-
-
Material and labour for Rendering 15 mm thick in CM 1:3 mixing with Liquid Water Proof Compound @ 200ml per Bag of cement on fair faces concrete surfaces of roof slab after wire burshing and cleaning top surface complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid Water Proof Compound WPC shall be measured and paid separately.
75
-
-
Material and labour for water proofing roof treatment to accessible / Non accessible RCC Roof with APP modified membrane with non woven polyster reinforced weight not less than 3.00kg / Sqm of thickness not less than 3.00mm having thermal isulation with white mineral / gravel finish on upper side of membrane uniformely embedded during manufacturing process with and including all as per following specifications: (a) The sufrace of the roof,parapet and gutters, drain mouths etc. over which water proofing tratment is to be applied shall be cleaned of all foreign matters such as fungus, mass , dust etc.by wire brushing and dusting . For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes , chimney stacs etc. and other similar situtaions to ease up about corners. (b) Bituminous primer conforming to IS:3384-1965 @ 0.30 kg / Sqm to be applied on prepared surface till the surface is properly impregnated.
(c) APP modified waer proofing membrane as specified shall be laid on the primer surface by torch application method as per manufacturer's instructions. The overlaps while torching shall be 100mm in both directions ( longitudnal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrane layers and selaing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.
75
-
-
Material and Labour for Chequered cement concrete tiles with grey cement and no pigments,of size 25cm x 25cm x 20mm to 25mm thick, machine pressed, coloured & design as approved, set, jointed and pointed in neat cement slurry @ 3.00kg per sqm as in floors etc; laid over & including 15mm thick screed in Cement Mortar 1:4, complete all as specified and as directed by Engineer-in- charge.
70
-
-
Material and labour for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge.
150
-
-
Material and labour for Rendering 15mm thick in cement mortar 1:4 mixed with Liquid Water Proof compound @ 200ml per Bag of cement on brick work or concrete surfaces on wall / roof finished even and fair , complete all as specified and as directed by the Engineer-in-Charge.
Note: Liquid water proof compound as supply only shall be measured and paid seperately under appropriate item of Schedule 'A' BoQ.
120
-
-
Material and Labour for 5 mm thick rendering in cement mortar 1:3 on on concrete surfaces of ceilings ,finished even and smooth with out using extra cement complete all as specified and directed by the Engineer-in-Charge.
68
-
-
Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-charge.
47.5
-
-
Material and Labour for Hardcore of gauge n exc. 63 mm of broken stones or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface as required complete all as specified and directed.
9.8
-
-
Material and labour for 25 mm thick Cement Concrete PCC 1:2:4 type B-1 using 20mm graded stone aggregate finished even and rough to receivethe tiles Complete all as specified and directed.
68
-
-
Supply & Fixing vitreous china wash hand basin, oval type of size 460mm x 310mmx 220 mm, counter sunk complete including waste, chain and plug and porcelain stopper. 32 mm dia waste coupling and PVC waste pipe of and mild steel angle iron brackets and fixed all as directed complete .
1
-
-
Material and Labour vitreous china urinal of size 410mm x 380mm x 950mm, half stall type white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe ) including CP urinal spreader and CP connection and waste pipe complete all as specified and directed.
1
-
-
Supply and fixing galvanized steel tubing medium grade 15mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete concealed in walls, ceiling and laid in floor complete all as specified and as directed by Engineer-in- charge.
130
-
-
Supply and fixing galvanized steel tubing medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed completeconcealed in walls, ceiling and laid in floor complete all as specified and as directed by Engineer-in- charge.
50
-
-
Supply and fixing 15mm bore Bib tap cast copper alloy, chromium plated, Fancy Type ,with long shank body with crutch or butterfly handle with capstan head, wall flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
3
-
-
Supply and fixing three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed by Engineer-in-charge.
1
-
-
Supply and Fixing Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.
1
-
-
Supply and Fixing 20 mm bore Gun metal globe or Gate valve with iron wheel head , screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in- charge.
1
-
-
Material & Labour for Cast iron floor trap 100mm bore, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in- charge.
3
-
-
Supply & fixing Stack clamps for 100mm dia pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by Engineer-in- charge.
8
-
-
Supply & fixing in replacement Soap dish, vitreous China white, ap proximate size 160mm x 160mm x 90mm complete all as specified and as directed by Engineer-in- charge.
2
-
-
Supply and fixing 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including PVC frame alround made of PVC channel, complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply & fixing brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.
2
-
-
Supply & fixing pillar tap cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.
1
-
-
Supply and fixing stop valve/angle valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge.
4
-
-
Supply and fixing stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
13
-
-
Supply and fixing brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-charge.
1
-
-
Material & Labour for 100 mm bore cast iron soil waste and vent pipe (sand cast pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50mm x 5mm and 16mm dia round iron stay including nut bolt and jointing with cement mortar complete all as specified and as directed by Engineer-in- charge.
4
-
-
Supply and Fixing 100mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and as directed by Engineer-in- charge.
2
-
-
Material & Labour for 75 mm bore cast iron soil waste and vent pipe (sand cast pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50mm x 5mm and 16mm dia round iron stay including nut bolt and jointing with cement mortar complete all as specified and as directed by Engineer-in- charge.
6
-
-
Supply and Fixing 75mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and as directed by Engineer-in- charge.
2
-
-
Supply & fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed along walls with stack clamps made out of FI 50mm x 5mm and 16mm dia round iron stay (at the interval of 1.00mtr ) including nut bolt complete all as specified and as directed by Engineer-in- charge.
10
-
-
Supply and fixing Pressed steel frames for doors with one or more rebates with and including including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm,with and including one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
10.6
-
-
Supply and fixing Pressed steel frames for doors with one or more rebates with and including including hinges, lock strike plate, fixing lugs, etc., size of frame 105mm x 60mm,with and including one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
10.2
-
-
Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
13
-
-
Supply and Fixing 300mm long, aluminium anodised sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engineer-in- charge.
4
-
-
Supply and Fixing Framed work such as grills, gratings, etc.. with ends of bars
shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;
ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in- charge.
96
-
-
Material & Labour Factory made steel window Box type using ERW hollow 'P' section comprising double frame for and including gauged and Skeleton shutter jointed internally with flat iron 40mm x 4mm complete with and including Guard bar grill made out with 8mm square bars, fixed horizontally @ 10cm c/c with and including one shop coat of red oxide zinc chromate primer , including providing hinges,pivots, handle, tower bolts, stops, lugs,steel peg stay etc. complete all as specified and directed. Note :- (i) Weight of steel sections , flat iron 40mm x 4mm, hinges,pivots, Guard bar grill made out with 8mm square bars ,handle, tower bolts, stops, lugs,steel peg stay shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of steel sections , flat iron 40mm x 4mm, hinges,pivots, Guard bar grill made out with 8mm square bars ,handle, tower bolts, stops, lugs,steel peg stay at site.(ii) During the weighing of steel sections , flat iron 40mm x 4mm, hinges,pivots, Guard bar grill made out with 8mm square bars ,handle, tower bolts, stops, lugs & steel peg stay the weight of one shop coat of red oxide zinc chromate primer shall not be considered for weight but the rate of material and labour for providing one shop coat of red oxide zinc chromate primer is included in this item and nothing shall be paid extra on this account.(iii) The board shall be duly countersigned by GE shall enclosed with Final Bill (iv) Glazing shall be measured and paid seperately.
960
-
-
Supply & Fixing 3 mm thick sheet glass, frosted or obscured on side and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified
1
-
-
Supply and fixing 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply and Fixing vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm x 260 mm, white, with integral foot rests with 'P' or 'S' trap including provision of cement concrete bedding ( excluding flushing cistern and flush pipe) including making connections complete all as specified and as directed by Engineer-in- charge.
1
-
-
Material and labour for 150mm bore (internal dia) salt glazed stone ware (SGSW) drain pipe, grade ‘A’, laid on concrete bed to required slope in trenches, jointing with packed spun yarn and in cement and sand mortar (1:1) and tested complete all as specified and directed by Engineer-in-Charge. (Note : Excavation, earrh work and concrete bed shall be measured and paid separately under appropriate item of BOQ.)
30
-
-
Supply and fixing floor door Stopper (140mm overall length of cover plate) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed.
9
-
-
Material and labour for cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as in bed of drain pipe of size upto 150mm bore (internal) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in- charge.
25
-
-
Material and labour for PCC (1:2:4) type B1 using 40mm graded stone aggregates as in surface channels and drain complete all as specified and as directed by Engineer-in- charge.
0.3
-
-
Supply and Fixing 3.00 mm thick Sheet glass ordinary quality ,fixing with oil putty to wooden or steel surface n.exc 0.5 sqm each complete all as specified and directed
9.6
-
-
Removing surplus excavated material exceeding 250m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
79.5
-
-
Material and Labour machine pressed precast concrete coloured interlocking paver block any shape, size and pattern, IS - 15658-2006 (Marked) in red and yellow clour of 60 mm thickness of M-35 grade with grey cement & pigment complete all as specified and directed .
100
-
-
Material and Labour for sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed by Engineer-in-charge.
2.5
-
-
Material and labour for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
30
-
-
Material and labour for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
60
-
-
Material and labour for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
28
-
-
Material and labour for preparation of new plastered surfaces on walls and apply two coats of OBD over 2.0mm thick wall care putty complete all as specified and directed.
150
-
-
Material & Labour Preparation of newly plastered or unplastered surfaces on ceiling and applying three coats of white washing, complete all as specified and directed by the Engineer-in-Charge.
68
-
-
Material & Labour for preparing new plastered or unplastered surfaces of walls and applying two coats of weather paint colour as approved by GE over a coat of weather paint primer complete all as specified and as directed.
100
-
-
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
540
-
-
Material and Labour for point wiring with multistrand copper conductor FRLSH cable, ISI marked with colour coding for phase, neutral and earth, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm in and including Material and Labour for rigid non metallic PVC concealed conduit not less than 20mm dia (medium duty ISI marked) and conduit fittings concealed in wall/ ceiling and all other fixing accessories for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with multistrand copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including pressed steel powder coated sunken boxes of suitable size made out of 1.6mm thick sheet and covered with and including 3mm thick bakelite laminated hylem sheet (ISI marked) top cover etc. including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge
293
-
-
All as per item No 203.00 here in before but for one socket outlet 3 pin, 5/6 Amp 230 volts flush type on same board complete all as specified and as directed by Engineer-in- charge.
56
-
-
All as per item No 203.00 here in before but for one socket outlet 3 pin, 5/6 Amp 230 volts flush type on independent board complete all as specified and as directed by Engineer-in- charge.
184
-
-
All as per item No 203.00 here in before but for one light point controlled by two way switch complete all as specified and as directed by Engineer-in- charge.
3
-
-
All as per item No 203 here in before but for one socket outlet 6 pin, 6/16 Amp 2 in 1 with cable 2.5 sqmm multistranded copper conductor FRLSH cable on the independent board including provn of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continues as earth wire connected to earth dolly complete all as specified and as directed by Engineer-in- charge.
27
-
-
Material and labour in replacement Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:-
(a) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.
400
-
-
Supply and Fixing switch piano flush type 5/6 Amp, ISI marked 230V AC, single pole, one way complete all as specified and as directed by Engineer-in- charge .
533
-
-
Supply and Fixing Socket outlet 3 pin, 5/6 Amp 250 volts flush type complete all as specified and as directed by Engineer-in- charge.
240
-
-
Supply and Fixing Switch piano flush type , single pole, one way, 15/16 Amp ISI mark complete all as specified and as directed by Engineer-in- charge.
27
-
-
Supply and Fixing Socket outlet multipurpose 2 in 1, 6 pin, 15/16 Amp 250 volts flush type complete all as specified and as directed by Engineer-in- charge.
27
-
-
Supply and Fixing ceiling rose surface bakelite 65 mm x 50 mm with three terminal complete all as specified and as directed by Engineer-in- charge.
245
-
-
Supply and Fixing lamp holder PVC/ polycarbonate type with back plate suitable for batten fitting with LED bulb 9 watt complete all as specified and as directed by Engineer-in- charge.
54
-
-
Supply and Fixing modular switch two way 6 amps, 1 module complete all as specified and as directed by Engineer-in- charge.
3
-
-
Supply & Fixing Ceiling fan of 1200mm sweep complete with blades, down rods, including electronic regulator (modular type, 120w, 2 module) and accessories, 230 Volts, single phase, 50 Hz, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of suitable size from ceiling rose / connector, including extra GI / MS pipe down rod, as per site requirement , with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed.
56
-
-
Supply and Fixing in replacement Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, double door, powder coated DB SPN 8 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
6
-
-
Supply and Fixing Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, double door, powder coated DB SPN 8 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
1
-
-
Supply and Fixing in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED duly fitted on pvc square block 6500K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as per manufacturer's instructions and as directed by Engineer-in- charge.
165
-
-
Supply and Fixing in replacement MCB SPN 32 Amps, 10 KA, 'C' Curve, 230 V AC,50 Hz including necessary attachment complete all as specified and as directed by Engineer-in- charge.
9
-
-
Supply and Fixing in replacement MCB SPN 40 Amps to 63 Amps, 10 KA, 'C' Curve, 230 V AC,50 Hz including necessary attachment complete all as specified and as directed by Engineer-in- charge.
7
-
-
Supply and Fixing in replacement MCB SP 5 Amps to 40 Amps, 10 KA, 'C' Curve, 230 V AC,50 Hz including necessary attachment complete all as specified and as directed by Engineer-in- charge.
72
-
-
Supply and Fixing in replacement of MCCB 4 pole of rating 125 Amp, Icu -100% 16 KA, thermal magnetic based complete all as specified and as directed by Engineer-in- charge.
1
-
-
Supply and Fixing in replacement Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-43 protection, flush mounted for metal door, powder coated DB V TPN 4 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.make.
1
-
-
Material and Labour for Earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to with and including galvanised iron earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including earth pit in soft / loose soil , 15 cm thick charcoal common salt all around earth plate ,necessary form work, earth work and excavation in soft/loose soil , 20 mm GI medium grade pipe (ISI Marked) for watering and including funnel, wire mesh and GI protection pipe medium grade 15mm dia (ISI Marked) upto 7.5mtr from earth electrode , 40mm thick chamber made with PCC 1:2:4 type B1 ,cover slab made with RCC 1:2:4 type B1 Design mix ,edges covered with and including 40mm x 40mm x 6 mm angle iron frame duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer with and including 8mm dia TMT bars at 75mm c/c both ways with MS Hook of 12mm dia MS bars, etc , all as specified and directed by Engineer-In-charge. Note : (i)Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed.(ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account.
8
-
-
Material and Labour for Earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to with and including GI Strip 32mm x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including earth pit in soft / loose soil , 15 cm thick charcoal common salt all around earth plate ,necessary form work, earth work and excavation in soft/loose soil , 40 mm GI medium grade pipe (ISI Marked) for watering and including funnel, wire mesh and GI protection pipe light grade 40mm dia (ISI Marked) upto 7.5mtr from earth electrode , 40mm thick chamber made with PCC 1:2:4 type B1 ,cover slab made with RCC 1:2:4 type B1 Design mix ,edges covered with and including 40mm x 40mm x 6 mm angle iron frame duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer with and including 8mm dia TMT bars at 75mm c/c both ways with MS Hook of 12mm dia MS bars, etc , all as specified and directed by Engineer-In-charge. Note : (i)Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed.(ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account.
2
-
-
Supply and fixing LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as per manufacturer's instructions and as directed by Engineer-in-charge.
10
-
-
Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at groung/First/Scond floor including plastering for making good to the original surfaces of any description disturbed including painting /distemper matching with the existing colour.
Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.
6
-
-
Supply & Fixing Exhaust fan (Heavy duty) steel body, AC, Single phase 230 volts,50HZ,900 RPM ,300 mm sweep with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc. mounted in suitable opening arrangmement in wall and electric connection with and including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC Conduit and hanging on wall with 04 Nos. steel fastners 10mm dia 100mm long with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed.
6
-
-
Supply and Fixing water heater (Geyser) Auto restrat and safety measures type electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation complete all as specified & directed by Engr-in- Charge.
6
-
-
Material and Labour 4 Nos rawl plug of suitable size (4"-6") nuts & bolts, grouting work in RCC/Brick wall, cemented works complete all as directed by Engineer -in-charge.
24
-
-
Material and Labour for cutting to exisiting GI pipe line of size 15 / 20/25 mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittngs, plumbing work all as per site requirement and as directed by Engineer-in- charge. Note: The rate of GI fittngs such as tee or branch connection is included in this item and nothing shall be paid extra on this account.
6
-
-
Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (Geyser Box) with a two pin and earth plug and socket complete with and including one single pole MCB of capacity 25 Amps, 'C' curve , 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.
6
-
-
Supply and fixing PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series braded, threaded and cold series) complete all as directed by Engr-in-Charge.
6
-
-
Supply and fixing Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed by Engr-in-Charge.
6
-
-
Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 16 Sqmm 2.00 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
50
-
-
Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 16 Sqmm 4.00 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
110
-
-
Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 70 Sqmm 3.50 core conforming to IS-7098 (Part-I -1988) including taking out old unservicable cable along with bricks / PCC cable cover & GI pipe complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately)
110
-
-
Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified. (Note:- Punned thickness shall be considered for payment purpose)
20.5
-
-
Supply and laying Best quality, locally available, sub class ‘B’ burnt clay bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge.
1846
-
-
Material and Labour in replacement GI tube light grade 40mm bore, laid in trenches or fixed on wall, floor or on pole with aluminium clamps of size 25mm x 3mm of suitable length with bolts, nuts and washer of suitable size for cable protection complete all as specified and directed.
16
-
-
Supply and Fixing wall mounted LED light fitting 1 x 20 watt, 220 Volt, 6000K . 4 feet with retro LED tube and batten, environment friendly. energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in- charge.
10
-
-
Supply and Fixing new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP 66 roadway luminaire with high power LED of 25 watt toughened glass complete with GI bracket (01 No) MS clamps (02Nos) made out of minimum 3mm MS flat iron with suitable bolt and nut suitable for security light fitting fixing to wall/column & electrical connection to the light fitting providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and as directed by Engineer-in- charge.
2
-
-
Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15mm thick duly compartmentalized inside panel with 2.00mm thick CRCA sheet to accommodate the incoming and outgoing each switch gear shall have be independent opening and having provision for fornt and rear side opening with rubber beading and mild steel cable glands for each cable to make it weather and vermin proof double door hinged type, both side openable, air fins for ventilation panel shall be mounted on ICMC chanel of size (50mm x 50mm x 6mm ) & duly spray painted with seven tank process internaily and externally with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer supported on 04 legs suitable long each duly grouted in plain cement concrete blocks in 1:2:4 type B1 using 20mm graded stone aggregate manufacturer instruction and as directed by Engineer-in-charge comprising of following accessories :-
1
-
-
Contd/- serial item No 243.00 INCOMING (a) MCCB, 4 Pole, 400 Amps, 415 Volt of breaking capacity 36KA (Ics =100%Icu) with adjustable thermal and adjustable magnetic type -01 No. (b)AIuminium Busbar 600 Amp -01 No. OUTGOING (a) MCCB, 4 Pole, 250 Amps, 415 Volt of breaking capacity 25KA (Ics =100%Icu) with adjustable thermal and fixed magnetic type -01 No. (b) MCCB, 4 Pole, 160 amps, 415 Volt of breaking capacity 25KA (Ics =100%Icu) with adjustable thermal and fixed magnetic type -01 No. (c) MCCB, 4 Pole, 100 amps, 415 Volt of breaking capacity 25KA (Ics =100%Icu) with adjustable thermal and fixed magnetic type -02 Nos. (d) Indicator lamp (R,Y,B)- Set of three
(e) Multifuction Meter Digital type showing V,A,F,Pf Kw, KWH in built Selector switch with CT coiles for three phase-1 No.
-
-
-
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%