Military Engineer Services Tender

S&F Vitrous china urinal half stall type white ( excluding flushing cistern, flush pipe and waste pipe ) including connections to flushing pipe and out going pipes etc complete all as specified and directed

Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories incl dismentalling of exsiting 500 ltr capacity tank and s&f of 20 mm bore ptmt float valve with anodised heavy duty rod and ball complete all as specified and directed.

Supply and fixing in repair tubular towel railbrass chromium plated 20 mm dia D type 60 cm long including end brackets complete all as specified and directed.

Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:6 incl dismentalling of old /broken tiles complete all as specified and directed. .

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 incl dismentalling of old /broken tiles complete all as specified and directed.

Material and Labour for double charged VitrifiedTiles , of area exc 0.42 sqm but n exc 1.00 sqm and 7-8 mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in CM 1:6 including dismentalling of old tiles complete all as specified and

Description all as per Ser item No above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, including dismentqalling of exsiting tiles complete all as specified and directed.

M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and urinal partions and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed.

Supply and fixing in repair 15mm bore long body bib taps with Wall Flanges, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .

Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repair PVC connections 15 mm bore, 600 mm length, heavy duty, with PTMT nuts complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose 70 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and directed.Make :- CERA Cat No F-7020103

Supply and fixing in repair 5 mm thick bevelled edge mirror of selected quality glass, mounted and fixed with chromium plated brass screws/Struds and cup washers, complete all as specified and directed.

S&F 32/40 mm dia pvc waste pipe and urinal pipe including CP grating with waste hole as specified and directed.

S&F 16 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down old pipes of 15mm bore of any description complete all as specified and directed.

S&F 20 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including taking down of old pipes of 20mm bore of any description complete all as specified and directed.

Supply and fixing in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

Supply and fixing in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cartilever bracket 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and directed. .Make :- Hindware Cat No 10055

S&F in repair 110mm dia Pvc SWr Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified.

S&F in repair 75 mm dia Pvc SWr Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified.

S&F 110 bore, PVC Swr bends Juction , Tee and Y (any radius), p trap/ floor trap /s trap diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S&F 75 bore,PVC SWR , bends , junction , TEEand Y (any radius) p trap/ floor trap /s trap , diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound uincl Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, including taking down old cement plaster complete all as specified and directed.note : cost of wpc shall be included in this quoted rate nothing extra shall be paid on this account.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement incl M & L for preparation of new plastered surafaces of walls and applying two coats of acrylic distemper over a coat of primer complete all as per manufacturer instructions and including taking down old cement plaster all as specified and directred.

Material and labour for Dubbing out average 10mm thick on irregular surface of Ceiling in cement mortar in (1:3) finishing the surface even & smooth without using extra cement and incl Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, including taking down old cement plaster complete all as specified and directed. complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 incl 15 mm thick render in cement mortar in 1:4 incl demolition of old brickwork complete all as specified and directed.

Water proofing tratment to existing roof/terrace using sika coolcoat /or equivalent Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include. (a) Preparation of substrate and cleaning it off all loose and triable by mechanical means (b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant. (c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm. (d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat. (e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm. (f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL Tensile Strength 1.5 MPa ASTM D412 Elongation at Break 200% ASTM D412 Adhesion in Peel 1.5 MPa (on concrete substrate) EN 1542 Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305 Permeability to Water Vapour Passes IS 2645 Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96 Water Absorption 10% ( by Mass) ASTM D570 Microbiological Resistance No Algae & Fungal Growth ASTM D5590 Solar Reflectance Index 102 ASTM E1980. Note : Complete material shall be procured in bulk and kept in lock and key. Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer

M & L in repair PCC 1:2:4 for PCC type B-0 using 12.50 mm graded stone aggregate as in coping steps bed blocks etc incl Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recovered or only a part there of) of any thickness complete all as specified and directed by Engineer-in-Charge

Supply and fixing three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories incl dismentalling of old exc tank of 1000 ltr capacity and s&f of 20 mm bore ptmt float valve with anodised heavy duty rod and ball complete all as specified and directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

Supply and fixing powder coated Anodised aluminium door shutters,/ windows and ventilator shutter aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed .

Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed .

S&F 100mm size moritice lock of brass, vertival type, 4 levers, complete all as directed.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge

S & F 4.80 mm thick sheet glass ordinary quality and glazing with beads fixed with metal pins complete all as specified and directed.

S&F tee Grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting consisting angle cleats of size 25mm wide 1.6m thick with flag fixed to RCC ceiling with door fasterner or wrapping the suspending wire around the existing wooden/steel/purlin/rafter for suspending grid frame work of size 605mm x 605mm c/c on main Tee and fixed to T-grid as per manufacturer's instructions. The section of main Tee 37mm x 24mm x 0.60mm and perimeter angle 24mm x 24mm x 0.50mm thick shall be fixed to wall with GI screws 40mm long and 450mm c/c along the perimeter of wall all as per manufacturer's instructions.incl S & F Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wiremesh incl dismentalling of false ceiling of any type and description complete all as specified and as directed.

S&F hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on including PVC frame including PVC beading on edges & top etc as per specifications incl dismentalling of exsiting wall panelling of any description complete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan (pedastal pattern) with and including plastic water closet seat white black , closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device incl flush pipe and fixing bolts ( excluding flushing cistern) etc complete all as specified and directed.

M & L for machine cut kota stone slab flooring & skirting, riser , dado 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including over 15 mm thick screed bed in CM 1:4 incl dismentalling of old stone slabs/ roughening of old concrete floor complete all as specified and as directed

M&L for complete removalk of exsiting treatment and preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of ACRYLIC distemper on walls over a coat of 1.5mm thick wall putty complete all as specified and directed.

M&L for complete removal of exsiting treatment anbd preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of cement base paint on walls complete all as specified and directed.

Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc 2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc 3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture. 4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm. 5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat. 6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm. 7. Tech specification.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish from the site as directed complete all as directedand M&L PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed.

Supply and fixing in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed .

Supply only liquid water proofing compound ISI marked confirming to IS 2645 - 2003 all as specified.