Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 77,500Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Cwe/fzr-24/2024-25 Provn Of Addition/alteration To Bldg Bo T-4 For Cook House And Dining Hall At New Location (pocket 7) Of (i) Tptr Pl Asc Under Ge(east) Ferozepur Cantt
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671645_1Bid Award Id
ViewTender No
CWE/FZR-24/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness
242
-
-
Supply and fixing Anodised aluminium snap grid frame work for false ceiling incl hanging wire complete all as specified and as directed by Engineer-in-Charge
356
-
-
Material and labour for 6mm Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed by Engineer-in-Charge.
356
-
-
Dismantling floor ,hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises.
620
-
-
Material and labour for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.
110
-
-
Material and labour for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
280
-
-
Material and labour for non - skid Ceramic tiles 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
80
-
-
Material and labour for Glazed ceramic tiles, coloured (colour as approved), of size 300x450x7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
345
-
-
All as per Item No-08 here-in-before but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as specified and as directed by Engineer-in-Charge and directed.
25
-
-
Material and labour brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed by Engineer-in-Charge and directed.
38
-
-
All as per item 14 above but using old bricks retrieved from srl item No 13 above including cleaning and removal of mortar from old bricks etc complete all as specified and as directed by Engineer-in-Charge and directed.
3
-
-
Material and labour for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge and directed.
12
-
-
Demolition RCC Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work
1.1
-
-
Material and labour for use & waste wooden form work (rough finished surfaces ) to sides & soffits of Chajjas, parapetSupply and fixing acia and similar work n. exc 200 mm thick, complete all as specified and as directed by Engineer-in-Charge
11
-
-
Material and labour for RCC type B1, 1:2:4 (20 mm graded Stone agg) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
2
-
-
Supply and fixing mild steel TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
220
-
-
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
1005
-
-
Material and labour for rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
715
-
-
Material and labour for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
400
-
-
Material and labour for preparation of new plastered wall surfaces and applying two coats of cement base paint over a white wash complete all as specified and as directed by Engineer-in-Charge.
615
-
-
Material and labour for 2mm thick wall care putty on wall complete all as specified and as directed by Engineer-in-Charge and directed.
240
-
-
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed by Engineer-in-Charge.
2
-
-
All as per item No 27 above herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.
17
-
-
Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and as directed by Engineer-in-Charge and as directed
2
-
-
Supply and fixing anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge
15
-
-
Supply and fixing anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, Tower bolt & handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge.
4
-
-
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed by Engineer-in-Charge and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made
8
-
-
Supply and fixing aluminium grill of standard section, type 'A' diagonal, with U rail necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc complete all as specified and as directed by Engineer-in-Charge.
13
-
-
Supply and fixing plain sheet glass 5.5 mm thick, ordinary quality and glazing, fixed (supplied alongwith shutters), in squares exc 0.50 Sqm complete all as specified and as directed by Engineer-in-Charge
13
-
-
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
19.5
-
-
Supply and fixing brass mortice lock 100 mm,4 levers, vertical type, fixed to cupboard shutters, complete all as specified and as directed by Engineer-in-Charge.
2
-
-
Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm complete all as specified and as directed by Engineer-in-Charge.
15
-
-
Supply and fixing pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge.
11
-
-
All as per item No 38 above here-in-before but size 125x60mm with double rebate.
31
-
-
Material and labour for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and as directed by Engineer-in-Charge.
0.26
-
-
Material and labour for cement concrete (1:2:4) type B-I using 20mm graded stone agg. As in bed block of hold fast coping etc incl. necessary form work complete all as specified and as directed by Engineer-in-Charge.
0.9
-
-
Material and labour for Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I section-8 complete all as specified and as directed by Engineer-in-Charge.
20
-
-
Material and labour for factory made 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and as directed by Engineer-in-Charge.
15
-
-
Supply and fixing factory made double rebate box type side hung steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle with & without glazing bars, one side two shutters with glazing bars & other side glazed shutter with glazing bars including 10mm mild steel guard bars dovetailed or welded and with framed with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. Note Wiremesh & glass will be measured separtely.
12
-
-
Supply and fixing factory made box type steel ventilator top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and shown on Drawing No CEJZ/TD-1019/08 sheet 1/3 to 3/3.
5
-
-
Supply and fixing Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified and as directed by Engineer-in-Charge.
40
-
-
Supply and fixing 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares exc 0.50 Sqm complete all as specified and as directed by Engineer-in-Charge.
13.6
-
-
Supply and fixing aluminium tower bolt of extruded section, 150 mm length of bolt and fixed with screws, complete all as specified and as directed by Engineer-in-Charge.
20
-
-
Supply and fixing 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and as directed by Engineer-in-Charge.
20
-
-
Supply and fixing 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Supply and fixing decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups,rings @ 10 Nos per Rm & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed by Engineer-in-Charge and as directed
32
-
-
Material and labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer-in-Charge.
3250
-
-
Dismantlingin fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed by Engineer-in-Charge.
480
-
-
Material and labour for preparation of old steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
85
-
-
Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over priming with a coat of red oxide, zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.
105
-
-
Material and labour for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
80
-
-
Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc; over 40 sq. cm in each section, fixed in any position as in framed work complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and n. exc. 22.5 cm long and dia of bolt 11 to 15 mm complete all as specified and as directed by Engineer-in-Charge.
12
-
-
Supply and fixing MS Plate (Plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with riveted bolted or welded attachment Fe-410-W(Gde-E-250) complete all as specified and as directed by Engineer-in-Charge.
60
-
-
Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engineer-in-Charge.
520
-
-
Supply and fixing Pre painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
542
-
-
Supply and fixing pre-painted galvalume aluminum zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
31
-
-
Material and labour for preparation of old decorated surfaces of wall and applying three coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and as directed by Engineer-in-Charge.
140
-
-
Material and labour Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. or more coats on new work complete all as specified and as directed by Engineer-in-Charge.
250
-
-
Material and labour Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old surface of wall incl complete removal of existing surface complete all as specified and as directed by Engineer-in-Charge.
100
-
-
Demolition of un-reinforced cement concrete in any position complete all as specified and as directed by Engineer-in-Charge.
0.25
-
-
Material and labour for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed by Engineer-in-Charge..
55
-
-
Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed by Engineer-in-Charge in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).
18
-
-
Supply and fixing for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and as directed by Engineer-in-Charge. Make: Rajshri or equivalent as approved.
12
-
-
Supply and fixing for PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Supply and fixing for PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and as directed by Engineer-in-Charge.
15
-
-
Supply and fixing for PTMT handle 125mm long fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed by Engineer-in-Charge
50
-
-
Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed by Engineer-in-Charge
65
-
-
Supply and fixing Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.
45
-
-
Supply and fixing Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.
56
-
-
Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and as directed by Engineer-in-Charge.
5
-
-
Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and as directed by Engineer-in-Charge.
9
-
-
Supply and fixing 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as complete all as specified and as directed by Engineer-in-Charge.
5
-
-
Supply and fixing 150mm Mild steel helical door spring including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.
8
-
-
Supply and fixing Towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Supply and fixing 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Supply and fixing 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Supply and fixing 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed by Engineer-in-Charge.
6
-
-
Supply and fixing stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc.
8
-
-
Supply and fixing Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge. .
10
-
-
Material and labour for vitreous china wash down water closet pan ( pedestal pattern including P or S trap), white/ coloured including seat & cover,cp jet spray, health faucet connection to drain and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed by Engineer-in-Charge.
1
-
-
Supply and fixing for 10ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in-Charge and directed.
4
-
-
Supply and fixing in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) complete including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) but fixed in repair complete all as specified and as directed by Engineer-in-Charge.
1
-
-
Supply and fixing Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Supply and fixing Toilet paper holder of brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
1
-
-
Supply and fixing Low density polyethylene (LDPE) pipes 32mm bore of pressure rating 6 kgf/sq. cm complete all as specified and as directed by Engineer-in-Charge.
9
-
-
Supply and fixing PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Supply and fixing 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed complete all as specified and as directed by Engineer-in-Charge.
5
-
-
Supply and fixing Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size and angle iron brackets & CP Pillar tap of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Supply and fixing for 15mm bore stop valves/ angle valve CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup complete all as specified and as directed by Engineer-in-Charge.
28
-
-
Supply and fixing Stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
3
-
-
Supply and fixing 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and as directed by Engineer-in-Charge.
2
-
-
Supply and fixing sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or ncluding fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ® complete all as specified and as directed by Engineer-in-Charge and directed
1
-
-
Supply and fixing sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® complete all as specified and as directed by Engineer-in-Charge.
4
-
-
Supply and fixing 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge and directed. (Make : Prince, Kissan, vitus or equivalent)
15
-
-
Supply and fixing 110mm bore, PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.
4
-
-
Supply and fixing 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.
4
-
-
Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-Charge and directed.
20
-
-
Supply and fixing 75mm bore, PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Material and labour PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and as directed by Engineer-in-Charge.
12
-
-
Supply and fixing 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engineer-in-Charge
12
-
-
Material and labour for providing and laying at ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge..
1.65
-
-
Material and labour for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified and as directed by Engineer-in-Charge.
330
-
-
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified and as directed by Engineer-in-Charge.
11
-
-
Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.
8.25
-
-
Material and labour for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigmentsconfirming to IS 15658 -2006 of 60mm thickness, M-35 Grade complete all as specified and as directed by Engineer-in-Charge.
330
-
-
Material and labour for cleaning the blockage of bathroom/kitchen by cleaning the nanhi traps / gully traps of all the mud / sludge and getting out washing throughly traps, CI waste pipe by opening the cleaning eyes and depositing the sludge in a pit of suitable size at a distance not exceeding 100m from the gully trap and covering the same with the soil obtained from excavation of pit including excavation and earth work complete all as specified and as directed by Engineer-in-Charge and directed.
12
-
-
Material and labour for cement concrete type C-1, 1:3:6 (20 mm graded aggregate) as in copings complete all as specified and as directed by Engineer-in-Charge.
1.6
-
-
Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and as directed by Engineer-in-Charge.
139
-
-
Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity complete all as specified and as directed by Engineer-in-Charge..
3
-
-
Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified
100
-
-
Supply and fixing Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following One light/fan/bell/Bldg security light point controlled by one single pole one way switch.
81
-
-
ditto all as per Item No 118 but for one 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.
23
-
-
ditto all as per Item No 118 but for 0ne 3 pin 5 Amp socket outlet point controlled by one switch on same board.
17
-
-
All as per item No118 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
16
-
-
All as per item No118here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated,stranded,unsheathed copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
4
-
-
Supply and fixing 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge. Make- Anchor/ Cona/ Plaza.
113
-
-
Supply and fixing Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge. Make- Anchor/ Cona/ Plaza.
20
-
-
Supply and fixing 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge. Make- Anchor/ Cona/ Plaza.
40
-
-
Supply and fixing Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge. Make- Anchor/ Cona/ Plaza.
20
-
-
Supply and fixing Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and as directed by Engineer-in-Charge. Make- Anchor/ Cona/ Plaza.
61
-
-
Supply and fixing batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and as directed by Engineer-in-Charge. Make- Anchor/ Cona/ Plaza.
18
-
-
Supply and fixing rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified. Make- Anchor/ Cona/ Plaza. Make- Anchor/ Cona/ Plaza.
10
-
-
Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
27
-
-
Supply and fixing LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified.
18
-
-
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
8
-
-
Supply and fixing Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, partly immersed in wall, including of MCCB 4 pole adjustable thermal & fixed magnetic type 125 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified.
1
-
-
Supply and fixing Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.
2
-
-
Supply and fixing MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.
8
-
-
Supply and fixing MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.
12
-
-
Material and labour for Sub main wiring with two single core 2x6 sqmm FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board & making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and as directed by Engineer-in-Charge. (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length).
100
-
-
Supply and fixing exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified.
6
-
-
Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and as directed by Engineer-in-Charge.
6
-
-
Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified. Note : Ceiling fans obtained/ taking down from item Sr No.01 as above
10
-
-
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete.
10
-
-
Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electric water heater vertical storage type of 25 Ltrs capacity with stainless Steel inner tank, brass assembly, pressure release valve, heating element 1500/2000 W including all other accessories with high quality external finishes single phase with working Voltage 240 volts, 50 Hz, ISI marked complete all as specified and as directed by Engineer-in-Charge. Note: The cost of fixing of geysers including NRV,stud/ nuts/fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface is deemed to be included in the unit rate quoted.
2
-
-
Supply and fix Galvanised iron steel tubing medium grade of size 20mm complete with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers and making good the disturbed surfaces to match with the existing surface complete all as specified and as directed by Engineer-in-Charge.
20
-
-
Supply and fix Galvanised iron steel tubing medium grade of size 15mm complete with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Supply and fixing stop valve, cast copper alloy fancy type, chromium plated screwed down, high pressure with crutch or butterfiy handle screwed both side for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.
2
-
-
Supbly and fixing PVC connection 15mm size with brass nuts of length 600 mm for Hot/cold water supply complete all as specified and as directed by Engineer-in-Charge.
2
-
-
Supply and fxing bib tap fancy type cast copper alloy with crutch or butterfly handle, screwed down with chromium plated for iron pipe 15mm dia complete all as specified.
2
-
-
Supply & fixing Single pole & Neutral Sheet metal enclosure with a two pin and earth plug Top and socket complete with one Double pole MCB of 32Amps
4
-
-
Supply and fixing post top lantern LED type 20watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
2
-
-
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).
1
-
-
Supply and fixing as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 50 Sqmm nominal cross section, 3.5 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified and as directed by Engineer-in-Charge.
80
-
-
Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and as directed by Engineer-in-Charge.
Notes : (i) Excavation and earth work to be measured and paid separately).
(ii) Thickness of 18 cms after punning shall be considered for payment.
4.05
-
-
Supply and fixing in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work measured separately.
0.43
-
-
Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and as directed by Engineer-in-Charge.
7.8
-
-
Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge.
4.8
-
-
Supply and fixing mild steel galvanised pipe, light grade, 50 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified and as directed by Engineer-in-Charge.
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements