Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 94,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695861_1Tender No
GE FRD-83/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
156.8
-
-
... More
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and directed.
0.64
-
-
... More
M&L for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including full width beading all around fixed with glue & nail complete all as specified
59.28
-
-
... More
S&F 2nd class hardwood glazed skeleton shutters 35 mm thick open rebated and prepared to receive gauge etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified
44.46
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
76.8
-
-
... More
S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed
20.28
-
-
... More
S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.0 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charge
49.6
-
-
... More
S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.0 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one No of locking arrangement two nos Handle etc and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer all as per Godrej pattern complete all as specified and directed by Engr-in-charge
Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion)
(ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.
32
-
-
... More
Dismantling of boarding any description fixed in any position with nails complete all as specified
29
-
-
... More
M&L for 25 mm thick both side prelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified
29
-
-
... More
M&L for Plain fillets or beading of sectional area exc 3 & n. exc 6 sqcm of 2nd class hard wood square, rectangular or triangular in section, clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer-in-Charge
57.6
-
-
... More
M&L for softwood Moulding as in cornices, picture rails and the like Not exceeding 6 sqcm complete all as specified
48
-
-
... More
S&F 100mm long, Stainless Steel hinges with stainless steel screws complete all as specified
192
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 19-20 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with M&L stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge
12
-
-
... More
S&F in repair 30mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised all as specified
32
-
-
... More
S&F 150mm long chromium plated decorative handle including necessary screw and fittings complete all as specified and directed
32
-
-
... More
S&F Magnetic Catcher of size 50 mm fixed with screws complete all as directed.
16
-
-
... More
S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.
32
-
-
... More
S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.
112
-
-
... More
S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.
144
-
-
... More
S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified
18
-
-
... More
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified
32
-
-
... More
S&F 140 mm length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor all as specified
56
-
-
... More
S&F 75 to 80 mm long door silencer suitable for Door size up to 4 Sqm, fixed with suitable screws complete All as specified and directed by Engineer-in-Charge.
36
-
-
... More
S&F Aluminium frame for doors, window with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minimum thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements to fix guard bars and S&F of PVC sleeves for guard bars. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-Charge.
Note: Guard Bars shall be measured and paid for separately
160
-
-
... More
M&L for providing and fixing stainless steel (Grade 304) in Window Grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the Grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size as Specified and Directed by Engineer-in-Charge
150
-
-
... More
S&F Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws, aluminium fitting such as peg stays 150mm long (01 No) for each shutter, hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.
Note: Only Glass and wiremesh will be measured and paid separately
47.52
-
-
... More
S&F Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters complete all as specified
16
-
-
... More
S&F of Door Seal (brush type) of length exc 800mm and nexc 1000mm, width not less than 38mm Including Brush fixed with screws complete all as specified
16
-
-
... More
S&F Stainless steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40mm and fixed etc., complete all as specified
31.73
-
-
... More
M&L for sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified
23.76
-
-
... More
All as per Srl item No. 34.00 here-in-before but pin head type, figured glass
1
-
-
... More
S&F Framed work such as grills, gratings cooler stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.
40
-
-
... More
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (for steel surfaces) including preparation of surface complete all as specified.
27
-
-
... More
S&F Mild steel 1.25 mm , plain, sheet in Mild steel sheet cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and directed by Engr-in-Charge
1.2
-
-
... More
M&L two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces, n.exc 10cm in width or girth including preparation of the surfaces complete all as specified
5
-
-
... More
M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
225.26
-
-
... More
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified
10.33
-
-
... More
S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- Charge
20
-
-
... More
S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- Charge
257
-
-
... More
M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, cut to reqd size and shape as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified
32
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazzo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified
220
-
-
... More
S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work all as specified . (Highlighter shall be provided as directed by Engr-in-Charge)
360
-
-
... More
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar all as specified
3.97
-
-
... More
M&L for Granite (of any type) work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified
15.72
-
-
... More
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified
16
-
-
... More
M&L for Machine cut kota stone slab flooring, cills 18-20mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (single piece of Kota stone to be fixed in stair treads) all as specified
19.02
-
-
... More
M&L for Kota stone slab 12-15mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (single piece of Kota stone to be fixed in stair risers) all as specified
4.99
-
-
... More
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified
2
-
-
... More
Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under :-
(a) Cleaning of sunen portion and roughining to receive treatment.
(b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately)
(c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer.
(d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation.
(e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / eqivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.
Note: The plan area of floor shall be considered for payment.
4
-
-
... More
M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc. all as specified
2
-
-
... More
M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) with WPC under floor over sunken complete all as specified and directed
Note : WPC will be measured and paid separately. (WPC will conforms to IS: 2645-2003)
4
-
-
... More
M&L for 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified
1.8
-
-
... More
M&L for PCC (1:3:6) type C-2 (using 40mm graded aggregate) 75mm thick as in plinth protection including making grooves all as specified
35
-
-
... More
Demolition of RCC of any description such chajja, shelves etc and in any position not otherwise specially provided for complete all as specified and directed by Engineer-in-Charge (reinforcement cut as required to facilitate demolition)
1
-
-
... More
M&L for reinforced cement concrete type B1 1:1.5:3 (20 mm graded aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified
1
-
-
... More
M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified
50
-
-
... More
Use and waste of form work thorough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick all as specified
121.29
-
-
... More
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store all as specified
90
-
-
... More
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store all as specified
250
-
-
... More
Taking up or down GI tubing 25 mm bore pipe including cleaning for re-fixing or removal to store all as specified
28
-
-
... More
S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
81
-
-
... More
S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
150
-
-
... More
S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
14
-
-
... More
All as per Srl Item No. 65 here-in-before but refixing 15 mm dia ,old steel tubing and connections in new or old position (wall, ceiling and floors etc)
9
-
-
... More
All as per Srl Item No. 66 here-in-before but refixing 20 mm dia ,old steel tubing and connections in new or old position (wall, ceiling and floors etc)
100
-
-
... More
All as per Srl Item No. 67 here-in-before but refixing 25 mm dia ,old steel tubing and connections in new or old position (wall, ceiling and floors etc)
20
-
-
... More
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified
90
-
-
... More
S&F in repair Rotational moulded polythylene 500 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all as specified
8
-
-
... More
S&F in repairs 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
8
-
-
... More
S&F in repairs 25 mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
8
-
-
... More
S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed.
24
-
-
... More
S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed.
8
-
-
... More
S&F Brass CP Basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.
8
-
-
... More
S&F Brass CP Wall mixer 15mm bore for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
8
-
-
... More
S&F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed
24
-
-
... More
S&F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed
8
-
-
... More
S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified
56
-
-
... More
S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified.
8
-
-
... More
S&F sinks Without Drainage Board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.
8
-
-
... More
S&F in repair vitreous china counter wash basins, size 470x470mm white flat back to be fixed on granite/marble & RCC slab including cutting for and pinning in ends of brackets or erecting stand, including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. CERA SKU S2030115 OR SIMILAR AS APPROVED
8
-
-
... More
S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified
8
-
-
... More
M&L for 100 mm dia of long body CI 'P' or 'S' trap including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified
8
-
-
... More
S&F PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make all as specified
8
-
-
... More
S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed
8
-
-
... More
S&F 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified.
8
-
-
... More
S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified
8
-
-
... More
S&F Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed
8
-
-
... More
S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.
16
-
-
... More
S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.
24
-
-
... More
M&L for 25mm dia PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.
70
-
-
... More
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified
36
-
-
... More
S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.
36
-
-
... More
S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed
6
-
-
... More
Dismantling and disconnecting existing CI soil waste/vent pipe 100/75 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed
52
-
-
... More
S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps complete all as specified and directed
22
-
-
... More
S&F 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors complete all as specified
30
-
-
... More
S&F 100 bore, HR bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified
2
-
-
... More
S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) as in repairs complete all as specified
4
-
-
... More
M&L for 75mm dia of long body CI Floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified
24
-
-
... More
M&L for Branch pieces, 100 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge
6
-
-
... More
M&L for Branch pieces, 75 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge
12
-
-
... More
S&F in repairs CI cowls 100 mm complete all as specified and directed
2
-
-
... More
S&F Salt-glazed stoneware gully traps 150x 150 mm , square or round mouthed, type 'P’ complete all as specified
4
-
-
... More
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified
925
-
-
... More
M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified
400
-
-
... More
M&L for rendering 5mm thick in cement mortar 1.4 over 10mm thick in cement mortar in 1:6 on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound complete all as specified
Note : WPC shall be measured and paid for separately
300
-
-
... More
M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling all as specified and directed.
115
-
-
... More
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)
110
-
-
... More
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
165
-
-
... More
M&L for Acrylic polymer base damp-proof coating system with two component ready to use acrylic polymer modified damp-proof coating :
1. SURFACE PREPARATION: Remove the existing plastered surface with efflorescence/ seepage area. Non-moving cracks having width upto 5 mm must be filled with Polymer based crack filler. 2 APPLICATION: Apply acrylic polymer base damp proof coating by brush roller over SSD surface. Apply the first coat of damp proof coating with a paintbrush directly on the surfaces. Allow to dry for a minimum 2-3 hrs. Apply subsequent second layer after drying. The first coat and second coat must be applied in perpendicular direction. The coverage must be at least 1.2 sqm/kg/coat. The mixing for two component, if required, shall be done as per manufactures specifications. Rendering to be carried out after approval of Engr-in-Charge and shall be paid separately.
Make : Asian Paints Damp proof Ultra 2K/Fosroc Damp Protect/Dr Fixit dampguard
Note : Treatment shall be carried out through Authorized applicators only
80
-
-
... More
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over 2mm coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge
370
-
-
... More
M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying two coat of distemper oil emulsion white/tinted using hand roller complete over a coat of 1 mm wall care putty all as specified
300
-
-
... More
M&L for complete removal of existing surface finishes of ceiling with mechanical sander/ manual method and applying two coat of white wash on old plasterd ceiling surfaces etc complete all as specified.
80
-
-
... More
M&L for preparation of surfaces and applying two coat of white wash on newly plastered surface of ceiling etc complete all as specified.
115
-
-
... More
M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including filling depression of scraped surface with wall putty two coats 1.5 mm thick each and Finishing walls with Two coat of Acrylic Smooth exterior paint of required shade over and including one coat of exterior primer complete all as specified
150
-
-
... More
M&L for preparation of newly plastered or unplastered surfaces of wall, soffits/ facia of chajja/ roof slab for applying Two coat of Acrylic Smooth exterior paint of required shade over and including one coat of exterior primer complete all as specified
300
-
-
... More
M&L for preparation of newly plastered or unplastered surfaces of wall applying three coat of White Wash complete all as specified and directed by Engr-in-Charge
30
-
-
... More
M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and smooth and complete and then applying two coats of white wash on old decorated plastered or un-plastered surfaces of walls etc all as specified & directed by Engineer-in-Charge
80
-
-
... More
M&L for Obliterating old writing of any description, n.exc 0.1 sqm, with paint to match existing work etc complete all as specified and directed by Engineer-in-Charge
4.8
-
-
... More
Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-in-Charge
2
-
-
... More
M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc. complete all as specified and directed by Engineer-in-Charge
1.5
-
-
... More
All as per Srl item No 125 here-in-before but except bricks
0.5
-
-
... More
Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out soft soil complete all as specified
180
-
-
... More
M&L for PCC (1:4:8) type D-2 (40mm graded stone aggregate) as in foundation all as specified and directed
13.5
-
-
... More
M&L for Machine pressed Precast cement concrete interlocking coloured (glossy finished / rubberised paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with and including 40mm thick sand cushioning complete all as specified and directed by Engr-in-charge
180
-
-
... More
Dismantling of depressed precast concrete interlocking paver block of any shape and size and refixing the serviceable paver blocks and removing the unserviceable paver blocks from the site to a distance n.exc 500 metres complete all as specified and directed.
20
-
-
... More
M&L for providing and fixing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in Kerb Stone of any section indicated with plain fair faces including chamfers weatherings throughting etc and setting in CM (1:4) complete with joints to match all as specified and directed by Engineer-in-Charge
1.5
-
-
... More
M&L for Preparation of new concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint including priming paints complete all as specified.
6
-
-
... More
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified
97.1
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified
63.52
-
-
... More
Removing excavated material n exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified
23.58
-
-
... More
Demolition and breaking up drain pipes 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified
20
-
-
... More
M&L for 150mm bore reinforced concrete pipes, class NP2, laid and joined complete with collars laid in trenches and jointed complete all as specified
20
-
-
... More
M&L for 150mm bore Concrete bed (PCC 1:3:6 type C2) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified
20
-
-
... More
S&F in repair SFRC (Steel fibre Reinforcement concrete cover & frame ) HD-20mm, conforming to IS-12592, graded rectangular clear opening 560X560mm and fixed over manhole and make good of manhole complete all as specified and directed
6
-
-
... More
S&F in repair Precast Cement Concrete ( type B0 1:2:4 using 12.5mm graded stone aggregate) as in louvres and jallies , 35mm thick set in CM 1:4 all as specified and directed by Engr-in-Charge
5
-
-
... More
M&L for preparation of newly plastered surfaces of concrete and applying two coat of synthetic enamel paint complete all as specified
15
-
-
... More
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified.
212.37
-
-
... More
Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed all as specified.
16.99
-
-
... More
M&L for 40mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) with WPC in roof complete all as specified and directed
Note : WPC will be measured and paid separately. (WPC will conforms to IS: 2645-2003)
212.37
-
-
... More
M&L for screed bed 10 mm thick in cement plaster 1:4 with WPC on roof, fair faces of brick work or concrete surfaces all as specified and directed by Engr-in-Charge. Note : WPC will be measured and paid separately
212.37
-
-
... More
M&L for Roof Treatment as specified below and directed :
(a) Cleaning, washing of surface and removing all existing bitumen coatings/ APP membrane completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease.
(b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars. (c) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water)
(d) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (e) Applying three coat of HydroShield PUD microfibre reinforced UV resistant polyurethane (solid content 68% ) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents 80% & Specific Gravity @ 30OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls.
(f) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Make : DrFixit/ Asian/STP
Note : (i) The treatment shall be carried out as per the manufacturers instructions, and directed by Engineer-in-Charge. (ii) The plan area of floor shall be considered for payment
237.37
-
-
... More
Supply only Liquid water proofing compound complete all as specified
25
-
-
... More
M&L for providing cement concrete PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge
0.5
-
-
... More
M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation & mass concrete etc complete all as specified
3.09
-
-
... More
Formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar wk vertical or to batter complete all as specified
37.8
-
-
... More
Form work to sides and soffits of floor or roof beam, beam, hauchings, girders, bressumemers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams, flat, rough finished surfaces of concrete complete all as specified
24.27
-
-
... More
M&L for RCC 1:1½:3 type A1 (using 20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases beams; under-reamed piles slabs, under-reamed piles and mass concrete complete all as specified
41.71
-
-
... More
S&F MS TMT Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip all as specified
1852.73
-
-
... More
S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securining with clip all as specified
488.9
-
-
... More
M&L for Brickwork with fly ash Old size bricks straight or curved on plan exc 6 m mean radius wall built in cement mortar 1:6 all as specified
2
-
-
... More
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified
1670.47
-
-
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed by Engr-in-Charge.
228
-
-
... More
Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall/roof/ceiling surface in existing PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of modular switches, sockets, fan regulator etc covered with modular cover plate of required colour fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for One light point/Fan point/Exhaust point controlled by one way switch all as specified and as directed
128
-
-
... More
All as per Srl Item No. 158 here-in-before but One light point controlled by one two way switch
4
-
-
... More
All as per Srl Item No. 158 here-in-before but One three pin socket out let 5 amps on the same board with other switches
32
-
-
... More
All as per Srl Item No. 158 here-in-before but One 3 pin, 5A switch socket outlet point on independent board
32
-
-
... More
All as per Srl Item No. 158 here-in-before but One bell point controlled by one bell push
8
-
-
... More
All as per Srl Item No. 158 here-in-before but with 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor.
24
-
-
... More
S&F PVC Lamp holder suitable for LED 5 to 20 watt bulb complete all as specified and directed
42
-
-
... More
S&F LED bulb 1x10 Watt lamp having luminous efficacy warranty 2 year all as per specification & directed by Engr-in-Charge
42
-
-
... More
S&F of LED tube light fitting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge.
32
-
-
... More
S&F of LED tube light fitting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size all as per specification and directed by Engineer-in-Charge
8
-
-
... More
M&L for ceiling rose 3 terminal/ PVC/ polycarbonate isolated body all as per specification and directed by Engineer-in-Charge
56
-
-
... More
M&L for submain wiring with two single core PVC FRLS insulated copper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to existing concealed PVC conduit complete all as specified and directed by Engr-in-Charge.
Note: Cost of earth wire including in sub main wiring
150
-
-
... More
S&F Modular switch 1 way 6 amps one module switch all as specified and directed by Engr-in-Charge.
192
-
-
... More
S&F Modular socket 6A 2/3 pin combined 2 module socket all as specified and directed by Engr-in-Charge.
64
-
-
... More
S&F Modular switch 1 way 16 amps 1 module switch all as specified and directed by Engr-in-Charge.
24
-
-
... More
S&F Modular socket 6A / 16A - 2/3 pin combined 2 module all as specified and directed by Engr-in-Charge.
24
-
-
... More
S&F Modular switch 2 way 6 amps one module all as specified and directed.
8
-
-
... More
S&F Modular switch bell push 6 amps one module all as specified and directed.
8
-
-
... More
S&F Bell ding dong AC 230V single pole complete all as specified and directed .
8
-
-
... More
S&F in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessary complete all as specified and directed by Engineer-in-charge.
Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ
2
-
-
... More
S&F sheet metal enclosure for DB's SPN 230 volts 12 way double door complete all as specified and directed.
8
-
-
... More
S&F MCCB 4 pole, 415 V. adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed.
2
-
-
... More
S&F amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 40 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.
8
-
-
... More
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.
9
-
-
... More
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.
84
-
-
... More
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 including taking down old Unserviceable earthing any type complete all as specified and directed by Engineer-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is included in this item. (iii) Water pipe shall be provided in slanting position
2
-
-
... More
Supply and spread dry fine aggregate sand in trenches for cable cushioning all as specified on both top and bottom of cable including ramming all as specified and directed.
Note : For the purpose of payment the punned thickness only measured.
8.91
-
-
... More
Supply and lay Brick tiles; common burnt clay building bricks sub-class ‘B’ of standard size laid in trenches of across the cable protection all as specified and directed by Engr-in-Charge.
0.88
-
-
... More
Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection to be measured and paid separately.
150
-
-
... More
Supply, fixing and laying XLPE insulated armoured electric power UG cable with aluminium conductor, 1100 volt grade, nominal cross-sectional area 16 Sqmm 2core including terminal lugs complete all specified and directed.
Note :- Excavation, earth work, sand cushioning, protection bricks and pipe shall be measured and paid separately under appropriate items
30
-
-
... More
All as per Srl Item No. 187 here-in-before but of size 10 Sqmm 2 core
105
-
-
... More
All as per Srl Item No. 187 here-in-before but of size 6 Sqmm 2 core
25
-
-
... More
S&F in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications, including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire.
(j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : More than 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)
2
-
-
... More
Supply and laying steel water tubing, 25 mm dia ISI Marked, '“Medium grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road including taking down old Unserviceable pipe any type with all fitting complete all as specified.
30
-
-
... More
M&L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed including taking down old Unserviceable gate valve any type complete all as specified
8
-
-
... More
Supply and laying steel water tubing, 40 mm dia ISI Marked, '“light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting including taking down old Unserviceable pipe any type complete all as specified.
27
-
-
... More
S&F complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old Unserviceable light fitting any type as per specification & directed by Engr-in-Charge
6
-
-
... More
S&F ceiling fans complete with blades, down rods, Remote and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed
24
-
-
... More
Supplying, fixing and commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V, single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostat, NRV, connection piece PVC connection for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 Nos Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed
8
-
-
... More
Re-Fixing only electronic/electric meter single phase complete with accessories any size. two core copper flexible wire not less than 0.5 mtr for connecting from incoming to outgoing any size complete all as specified and directed by Engr-in-Charge.
8
-
-
... More
S&F exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self-closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fasteners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge
8
-
-
... More
Re-Fixing only Exhaust fans complete with accessories any size. Three core copper flexible wire not less than 0.5 mtr for connecting from ceiling rose/connector to exhaust fan and hanging on wall with 4 Nos steel fasteners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge
8
-
-
... More
M&L submain wiring with two single core PVC FRLS insulated stranded copper conductor cable of size 4 sqmm and same 4 sqmm for continuous earth wire drawn in to concealed PVC conduit and making good to disturbed area complete all as specified and directed .
Note: Cost of PVC conduit, conduit accessories and earth wire including in sub main wiring
60
-
-
... More
S&F DBOXx SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single pole complete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed by Engr-in-Charge
8
-
-
... More
Supply and laying Rigid non-metallic PVC conduit size 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. with all fitting including taking down old Unserviceable pipe any type complete all as specified.
148
-
-
... More
M&L for river sand, washed and screened dry for cushioning to underground cable in trenches below and around underground cable including spreading and levelling complete all as per directed
9
-
-
... More
Supplying and laying un-reinforced precast concrete cable cover, class LV, type-1, flat, size 250 mm x 150 mm x 40mm complete all as specified and directed by Engr-in-Charge
380
-
-
... More
M&L for boring/ drilling (horizontally) manually under existing road suitable for passing GI tubing of 40 mm bore complete all as specified
6
-
-
... More
S&F street light bracket fabricated out of GI tubing light grade 40 mm bore bend to the shape as directed and of length 1.0 mtr complete with mounting MS clamp of flat iron size 40 X 5 mm of suitable length 04 pairs including nut bolts etc of suitable size complete all as specified and directed
4
-
-
... More
S&F Junction box of size 250 x 200 x 100 mm out door type, IP65, made out of polycarbonate with glass fibre reinforced suitable for 3 phase, 415 volts, pole mounting consisting of aluminium bus bar strip 15cm x 3mm, 4 Nos fixed on porcelain or epoxy terminal / insulators and provision for incoming/outgoing cables with grommets, including in built 6 Amp MCB, SP, 10KA complete all as specified and directed
4
-
-
... More
Supply, fixing and testing aesthetically designed LED street light luminaires of 60 Watts system wattage for energy saving having IP 66 degree of protection, with minimum system efficacy as85%,made of pressure die casting aluminium housing power coated in graphite grey and heat resistant toughened glass with excellent thermal management and prismatic polycarbonate covers for ensuring efficient optics and uniform distribution of light fitting should have operating voltage range of 150-270 VAC,THD20%,P.F.95 and fitting should have in built surge protector of 5 KV and CRI70 with CCT 5700 K complete all as specified and directed
4
-
-
... More
S&F LED post top lantern 40 watt with die cast aluminium spigot, spun aluminium powder coated top cover and clear acrylic diffuser, IP65, Watt including fixing arrangement with proper connection complete all as specified and directed
2
-
-
... More
S&F pre-stressed cement concrete pole, 9 metre long of cross section 102 mm x 172 mm at top and 102 mm x 279 mm at bottom, class 10, complying with requirements of IS-1678-1998 erecting truly in vertical position including painting of poles with two coats of synthetic enamel paint over a coat of primer in alternate strip of 30cm each in black and white colour upto 1.5 metre height from top of PCC pedestal/coping of poles complete all as specified and directed
4
-
-
... More
S&F sheet metal enclosure for DB's SPN 230 volts 6 way double door complete all as specified and directed
1
-
-
... More
M&L for mild steel galvanised stay assembly set complete comprising of 14mm dia 400mm long stay bow, 20mm dia 1800 mm long stay rod, 300mm x 300mm x 6mm stay plate, thimble, all as shown in electrical plate No.1 of MES Schedule part-I 2009 complete all as specified and directed.
Note : Excavation, earthwork and PCC in foundation shall be measured and paid separately under respective items of BOQ
2
-
-
... More
M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation for stays & mass concrete including necessary form work and fair finishing complete all as specified and directed by Engineer-in-charge.
Note :- A Sum of Rs. 78,906.80 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 54 & 55 (Schedule of credit) of Tender Documents.
2.5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%