Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 1,36,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695118_1Tender No
CWE BTD/TOKEN-28/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down shutter of area exceeding 1 sqm and n-exc 2.00 sqm each complete all as specified and as directed by Engineer-in- charge.
36
-
-
... More
Resecuring or easing & adjusting without taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed by Engineer-in- charge.
32
-
-
... More
Supply & fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
155
-
-
... More
Supply & fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.
46
-
-
... More
Supply and fixing stainless steel barrel tower bolts, 150 mm long conforming to IS 15833-2009, with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge.
62
-
-
... More
Supply and Fixing type 3 stainless steel door handle of size 150 mm conforming to IS 208-2020, fixed with countersunk conforming to IS 208-2020 complete all as specified and as directed by Engineer-in-charge.
62
-
-
... More
Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /cupboard frame/ Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply & fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge.
160
-
-
... More
Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with double rebate of Size 65mm x 125 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply & fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge.
230
-
-
... More
Supply & fixing in repair Mild steel framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, sink, hand wash basin, ladders and cooler stand etc complete all as specified and as directed by Engineer-in-charge.
220
-
-
... More
Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt with Stainlessd steel screws and including Supply & fixing of 02 Nos SS 150mm long handle with Stainlessd steel screws and 300 mm SS sliding door bolt with Stainlessd steel screws complete all specified and directed by Engineer -in-charge. Note:- The rate of 02 Nos. SS 150mm long Tower Bolt . 02 Nos. SS 150mm long handle and 300 mm SS sliding door bolt is included in this item and nothing shall be paid extra on this account.
80
-
-
... More
Supply & fixing Factory Made 30mm thick Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for supply and fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be panelled with and including mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and supply and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos. door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos. stainless steel barrel tower bolts of extruded section 150mm long (ISI marked), 2 Nos. stainles steel handles 125 mm long, (ISI marked) , 01 No. of helical door spring of 300 mm length complete all as specified and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company. 2. The rate of 03 Nos. door Stainless steel butt hings 100mm long with Stainlessd steel screws , 02 Nos stainless steel barrel tower bolts of extruded section 150mm long (ISI marked) with Stainlessd steel screws , 2 Nos. stainless steel handles 125 mm long, (ISI marked) with Stainlessd steel screws , 01 No. helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item.3. The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account.
102
-
-
... More
Supply & fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard flush door shutter of 20 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per directio of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
34
-
-
... More
Supply & fixing stainless steel butt hinges 100mm complete as specified and as directed by Engineer-in-Charge.
40
-
-
... More
Supply & fixing 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete as specified and as directed by Engineer-in-Charge.
30
-
-
... More
Supply & fixing Type-1 aluminium anodised hasp and staple of size 115 mm conforming to Is 363-1993 complete all as specified and as directed by Engineer-in-charge.
18
-
-
... More
Supply & fixing floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and as directed by Engineer-in- charge.
108
-
-
... More
Supply & fixing in replacement 300mm mild steel ordinary rat tail rod springs (helical spring) CONFORMING TO is 452-1973 , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge.
4
-
-
... More
Material and labour in repairs for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .
Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.
(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly.
(iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill .
900
-
-
... More
Supply & fixing 5.00 mm thick, figured glass, pin head type not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Supply & fixing 5.00 mm thick, tinted glass, pin head type not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
70
-
-
... More
Supply & fixing in repair Stainless steel galvanised wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm all as specified and as directed by Engineer-in- charge.
70
-
-
... More
Supply & fixing stainless steel work SS-304 grade as in grills grating etc with ends of bars shouldered and riveted framed guard bars, barred doors, ladders complete all as specified and as directed by Engineer-in- charge.The weight of stainless steel SS-304 shall be ascertained by the BOO as ordered by GE. The payment in RAR/ Final shall be made acordingly. Copy of BOO duly countersigned by GE shall be enclosed with RAR/ Final bill before releasing the payment to contactor.
280
-
-
... More
Supply & fixing in repair decorative Curtain rod stainless steel with fixing brackets, stops, rollers etc fancy type in repairs, complete all as specified and as directed by Engineer-in- charge.
230
-
-
... More
Supply and fixing in repairs sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge.
18
-
-
... More
Supply & fixing in repairs stainless steel plate racks of size 750mm x 600mm x 250mm having thickness of Stainless Steel strip 1mm, fixed on wall etc. complete all as specified & directed by Engr-in-Charge.
18
-
-
... More
Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
29.5
-
-
... More
Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc
2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc
3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture.
4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm.
5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat.
6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm.
7. Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry).
96
-
-
... More
Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curver on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and and as directed by Engineer-in-charge.
16
-
-
... More
Material and labour for 25 mm thick cement concrete (1:2:4), type B-I using 20 mm graded stone aggregate as in floor for leveling course complete all as specified and as directed by Engineer-in-charge.
48
-
-
... More
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, complete all as specified and directed by Engineer-in- charge.
320
-
-
... More
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge.
25.6
-
-
... More
Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:
(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means
(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.
(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.
(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.
(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.
(f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL
Tensile Strength 1.5 MPa ASTM D412
Elongation at Break 200% ASTM D412
Adhesion in Peel 1.5 MPa (on concrete substrate) EN 1542
Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305
Permeability to Water Vapour Passes IS 2645
Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96
Water Absorption 10% ( by Mass) ASTM D570
Microbiological Resistance No Algae & Fungal Growth ASTM D5590
Solar Reflectance Index 102 ASTM E1980.
Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key.
Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE.
335
-
-
... More
Material and Labour for 40mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.
320
-
-
... More
Material and labour for cement slurry @ 1.2 kg /sqm spreading with bristle brush and rendering 15 mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid water proof compound shall be measured and paid separately.
335
-
-
... More
Material and Labour for Making benching with PCC 1:2:4 type- B0, using 12.5mm graded stone aggregates using with Liquid Water Proof compound as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. by Engineer-in-Charge. Note : Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.
1.1
-
-
... More
Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in- Charge.
51
-
-
... More
Supply and Fixing 16 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 15mm bore complete complete all as specified and as directed by Engineer-in-charge.
210
-
-
... More
Supply and Fixing 20 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 20mm bore complete complete all as specified and as directed by Engineer-in-charge.
96
-
-
... More
Supply & fixing in repairs Rotational Moulded Polyethylene water storage tank ISI Marked of capacity 500 litres (cylindrical vertical, with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- Ball valve and gate valve shall be measured & paid separately under appropriate items of Schedule 'A' BoQ.)
18
-
-
... More
Supply and Fixing Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.
18
-
-
... More
Supply & fixing in repairs, 15mm bore Stop valves, cast copper alloy, screwed down, high pressure,
with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.
36
-
-
... More
Supply & fixing in repairs Waste pipe low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm 32mm bore etc complete all as specified and directed by Engr In Charge.
18
-
-
... More
Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour , including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
12
-
-
... More
Supply & Fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm x 440 mm x 260 mm white with integral foot rests including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed by Engineer-in- charge.
6
-
-
... More
Supply & fixing in repairs wash hand basin of size 550mm x 400 mm vitrous China white flat back including brackets, waste coupling & including PVC P Trap complete all as specified and as directed by Engineer-in-charge .
18
-
-
... More
Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.
18
-
-
... More
Supply & fixing in repair 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
36
-
-
... More
Supply and Fixing in repairs 15mm bore Stop valve / angle valve , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in- charge.
36
-
-
... More
Supply and fixing stainless steel, Chromium plated, decorative type, soap dish holder of approximate size 160mm x 160mm x 90 mm fixed to wall with rubber plugs complete all as specified and as directed by Engineer-in-Charge.
18
-
-
... More
Supply & fixing in replacement chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
18
-
-
... More
Supply & fixing in repair 15mm bore fancy type chromium plated concealed stop cock , long shank, valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-charge.
18
-
-
... More
Supply & fixing in repairs 15mm bore fancy bib taps, chromium plated ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
72
-
-
... More
Supply & fixing in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in-charge.
18
-
-
... More
Supply and fixing 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame alround made of PVC channel, complete all as specified and directed by Engineer-in-Charge.
18
-
-
... More
Supply & fixing 110 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old Cast iron rainwater pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge.
185
-
-
... More
Supply & fixing 110 mm bore, PVC (SWR) fittings Type -B floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer - in-charge.
20
-
-
... More
Supply & fixing 110 mm bore, PVC (SWR) fittings Type -B gully trap setting and jointing with solvent cement complete all as specified and as directed by Engineer - in-charge.
20
-
-
... More
Supply & fixing 110 mm bore, PVC (SWR) fittings Type -B such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge.
25
-
-
... More
Supply & fixing 50 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 of stays to wall at a distance of 100-120mm away from walls ( of any size and pattern) complete all as specified and as directed by Engineer-in- charge.compete all as specified and as directed by Engineer - in-charge.
85
-
-
... More
Supply & fixing 50 mm bore, PVC (SWR) fittings Type -B such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and as directed by Engineer-in-charge.
23
-
-
... More
Supply & fixing 110 in mm dia PVC type B (SWR) branch fittings Type -B piece, single (single Y) equal or unequal branch piece single ( equal or unequal), ordinary or inverted or with parallel branches complete all as specified and as directed by Engineer-in-charge.
28
-
-
... More
Supply & fixing 50 mm PVC (SWR) Type -B vent cowl complete all as specified and directed.complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
Taking down cement plaster of any description, any thickness from internal and external surfaces of walls/soffits / chajjas/parapet walls /ceiling etc .incl raking out joints, hacking for keys, scrubbibg down with water etc and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
1025
-
-
... More
Material and Labour for Cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces walls/soffits chajjas/parapet walls etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in- Charge.
Note : liquid water proofing compound shall be measured and paid separately as supply only under appropriate items of sch 'A' of BOQ.
450
-
-
... More
Material and Labour for Cement plastering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge.
365
-
-
... More
Material and Labour for Cement plastering 5mm thick in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge.
210
-
-
... More
Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in- Charge.
2020
-
-
... More
Material and Labour for applying acrylic wall care putty on internal surfaces and external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engineer-in- Charge.
Make of acrylic wall care Putty : AS described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
2020
-
-
... More
Material and Labour for prepration of surfaces with and including applying 02 coats of interior emulsion paint (shade as approved by GE ) , @ 10 sq.m/litre/2 coats by using roller to internal wall surfaces over with and including one coat of interior emulsion primer @ 10 sq.m/litre/1 coat by using roller as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.
1765
-
-
... More
Material and Labour for prepration of surfaces with and including applying 02 coats of exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/ RCC surfaces / soffits of chajjas / roof projections / cantilevers / balcony etc surfaces over with and including one coat of exterior emulsion primer @ 11 sq.m/litre/1 coat by using roller as recommended for under coat by manufacturer of exterior emulsion by using following brands of exterior emulsion paint and exterior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.
1070
-
-
... More
Material and Labour for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge.
210
-
-
... More
Material and Labour for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
700
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.
1425
-
-
... More
Material and Labour for providing and laying Premium (1st quality) straight edge,Stain free, glooss finish, Square Double charged vitrified tiles size in 600mm x 600mm x 9mm to 10mm thick as in floors etc. shade as approved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
615
-
-
... More
Material and Labour for providing and laying Premium (1st quality) straight edge,Stain free, glooss finish, Square Double charge vitrified tiles size in 600mm x 600mm x 9mm to 10mm thick as in skirting surfaces shade as approved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
50
-
-
... More
Material and Labour Non Skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) of Size minimum 400mm x 400mm, in floors etc including 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement having scratch hardness of surface min 6 on Mohs Scall and abrasion resistance of class V complete all as specified and as directed by Engineer-in-charge.
165
-
-
... More
Supply and Fixing glazed ceramic coloured tiles 7.5 mm to 8.5mm thick 600mm x 300mm size in verticle surface including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge.
595
-
-
... More
Material & Labour for Pre-polished kota stone 18-20mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick cement plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete complete all as specified and as directed by Engineer-in-charge.
65
-
-
... More
Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.
45
-
-
... More
Material and Labour Baroda Green Marble work 15-16 mm thick (table rubbed and polished) in shelves/steps, landings, cills, skirting borders, jambs, pillars, windowcills, cooking plateforms with polishing and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engineer -in- charge.
20
-
-
... More
Material and Labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.by engineer in charge.
40
-
-
... More
Material and Labour for preparation of steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chromate primer complete all as specified and as directed by Engineer-in-charge.
50
-
-
... More
Material and Labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge.
70
-
-
... More
Material and Labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge.
85
-
-
... More
Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.
2.5
-
-
... More
Material and Labour 75mm thick PCC 1: 3: 6 type C-2 ( using 40mm graded stone aggregate ) in plinth protection, including finishing the surface even and smooth without using extra cement.by Engineer-in-charge.
160
-
-
... More
Demolition of RCC of any description and any position not otherwise specially provided and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance not exceeding 500 metres away from the site complete all as specified and as directed by Engineer-in-Charge..Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
2
-
-
... More
Material and Labour for RCC 1:2:4 type B0 12.5 mm graded stone aggregate as in chajjas,papapet,fins,facias,cupboard shelves etc complete all as specified and directed by Engineer-in-charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
2
-
-
... More
Material and Labour for MS TMT bars 6mm to 8mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
130
-
-
... More
Material and labour for Formwork to chullah hoods, soffits and sides of chajjas/ parapets /cupboards shelves etc , troughs and similar items including edges on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
50
-
-
... More
Excavation in trenches in soft / loose soil not exceeding 1.5 meter wide & not exceeding 1.5 meter in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed by Engineer-in-Charge .
30
-
-
... More
Returning/filling in including spreading, leveling , watering & well ramming in layers not exceeding 25 cm thick in soft/ Loose soil all as specified and as directed by Engineer-in-Charge.
20
-
-
... More
Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe up to and including 150 mm bore complete all as specified and directed by Engineer-in-Charge.
50
-
-
... More
Supply and laying DWCPE (SN 8) drain pipes 150 mm nominal dia as per IS-16098 (Part-II), laid in trenches on bed including all accessories/ fittings/ jointed ring, jointing and testing complete all as specified and as directed by Engineer-in- charge.
Note:- Excavation , earth work, bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A'
50
-
-
... More
Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested including form work complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.
40
-
-
... More
Material and Labour for Cutting into existing manholes for connecting new drains, making good
to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge.
2
-
-
... More
Removing excavated material (Soils ) exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.
10
-
-
... More
Supply and fixing in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plqated, fancy type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr In Charge
18
-
-
... More
Material and Labour for Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete all as per manufacturer’s instructions, complete all as specified and as directed by Engineer-in-charge.
Note :- Mode of measurement : per sqm of breaking area of concrete only.
30
-
-
... More
Material and Labour for Providing and application of Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength 1N/sqmm according to ASTM C 882-78 complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.
Note :- Mode of measurement: per sqm of application area of concrete.
30
-
-
... More
Material and Labour for Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment , including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.
30
-
-
... More
Material and Labour for Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength = 50 N/sqmm (28 days) according to ASTM C 109; flexural strength = 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.
30
-
-
... More
Material and Labour for Rebuilding the section of damaged RCC/PCC elements to original size in thickness upto 100 mm by supply and casting with ready to use non shrink cemneticious free flow micro concrete having compressive strength = 50 N/sqmm (28 days) according to ASTMC 1107-99; including mixing , placing and levelling the surface by granding of cementicious sslurry or cementicious joiints difference if any and curing incl necessary form work , complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge. Mode of measurement shall be in Kg.
60
-
-
... More
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no.108.00,109.00, 110.00 , 111.00,112.00,113.00,114.00,115.00 , 116.00 & 117.00 of BoQ.
512
-
-
... More
Material and Labour Point wiring for one light / fan / 5 Amp independent socket point/ call bell point controlled by one 5 Amp Switch with using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, drawn through existing PVC conduit on wall / ceiling surface with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper cable as continuous earth continuity conductor (green in colour) terminated in Cast Iron Pressed steel terminal boxes including 3.00 mm hylam sheet and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge. .Note for serial item no.item no. 108.00, 109.00 , 110.00,111.00 & 112.00 :(i) switches , sockets 5 /6 Amp , Bell push, regulator , switches and socketes out let 15 / 16 Amps shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account.
209
-
-
... More
All as per item No 108.00 here-in-before but for One light point controlled by two 2 way switches complete all as specified and as directed by Engineer-in- charge.
9
-
-
... More
All as per item No 108.00 here- in -before but for one Socket outlet multipurpose 2 in 1, 5 Pin, 5/6 Amp, flush type on same board complete all as specified and as directed by Engineer-in- charge.
60
-
-
... More
All as per item No 108.00 here- in -before but for one Socket outlet multipurpose 2 in 1, 5 Pin, 5/6 Amp, flush type on independent board complete all as specified and as directed by Engineer-in- charge.
45
-
-
... More
All as per item No 108 here -in- before but for one Socket outlet multipurpose 2 in 1, 6 Pin, 15/16 Amp, flush type with cable 2.5 sqmm multistranded copper conductor FRLSH cable on the independent board including provn of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continues as earth wire connected to earth dolly complete all as specified and as directed by Engineer-in- charge.
18
-
-
... More
Material and labour for concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), in PVC conduit complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through with and including PVC rigid conduit 20mm dia ( heavy duty ) ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable length and 1.2mm thick ) and flush fixed with cement mortar 1:4 , 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc with and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge .Note for serial item no.113.00,114.00,115.00,116.00 & 117.00 : (i) switches , sockets 5 /6 Amp , sockets 15 /16 Amp & fan regulator shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. (iii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips as directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account.
90
-
-
... More
All as per item No 113.00 here-in-before but for One light point controlled by two 2 way switches complete all as specified and as directed by Engineer-in- charge.
3
-
-
... More
All as per item No 113.00 here- in -before but for one socket outlet 5 pin, 5/6 Amp 230 volts on same board complete all as specified and as directed by Engineer-in- charge.
33
-
-
... More
All as per item No 113.00 here- in -before but for one socket outlet 5 pin, 5/6 Amp 230 volts on independent board complete all as specified and as directed by Engineer-in- charge.
27
-
-
... More
All as per item No 113.00 here -in- before but for one Socket outlet multipurpose 2 in 1, 6 Pin, 15/16 Amp, flush type with cable 2.5 sqmm multistranded copper conductor FRLSH cable on the independent board including provn of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continues as earth wire connected to earth dolly complete all as specified and as directed by Engineer-in- charge.
18
-
-
... More
Supply and Fixing switch piano flush type 5 Amp, ISI marked 240V AC, single pole, one way complete all as specified and as directed by Engineer-in- charge
464
-
-
... More
Supply & fixing for switch piano, flush type single pole two way 5 /6 Amp, 240 volts all as specified .and as directed by Engineer-in- charge
24
-
-
... More
Supply & fixing for bell push switch flush type single pole , 5 Amp, 240 voltscomplete all as specified and as directed by Engineer-in- charge.
18
-
-
... More
Supply & fixing Socket outlet 2 in 1, 3 Pin, 5A, flush type complete all as specified and as directed by Engineer-in- charge
165
-
-
... More
Supply & fixing socket outlet 6 pin 15 Amp 240 volt multi purpose flush type complete all as specified and as directed by Engineer-in- charge
36
-
-
... More
Supply & fixing switch piano flush button single pole one way 15 Amp complete all as specified and as directed by Engineer-in- charge
36
-
-
... More
Supply & fixing ceiling rose surface type PVC polycarbonate isolated body two to three terminal , tp line series 20x50mm, 6 amps three terminal complete all as specified and as directed by Engineer-in- charge.
129
-
-
... More
Supply & fixing Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as directed and as directed by Engineer-in- charge
54
-
-
... More
Supply & fixing Batten lamp holder on PVC Square blocks with PVC insulated body complete all as specified and as directed directed by Engineer-in- charge.
90
-
-
... More
Supply and fixing Call Bell, Ding Dong AC. 230 volts,single pole, complete all as specified and directed by Engineer-in-charge.
18
-
-
... More
Supply and Fixing in repairs Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-43 protection, flush mounted for metal door, powder coated DB VTPN 4 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
3
-
-
... More
Supply and Fixing in repairs Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,IP-43 protection, double door, powder coated DB SPN 8 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
18
-
-
... More
Supply and Fixing in repairs MCCB Amps 16 KA , 4 pole, 415 Volt fixed thermal and fixed maganatic setting complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and fixing MCB ‘C’ curve suitable for 230 volts AC supply, 40 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-charge
18
-
-
... More
Supplying and fixing MCB SP suitable for 230 volts AC supply 6 to 32 Amps, SP rupturing capacity not less than 10KA, C Curve complete all as specified and directed by Engineer-in-charge.
136
-
-
... More
Supply and fixing in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED duly fitted on pvc square block 6000K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz., including electric connection connecting with using flexible coopper wire twin core from ceiling rose to connector complete all as per manufacturer's instructions and as directed by Engr-in-charge.
108
-
-
... More
Supply and Fixing in replacement LED mirror light fitting 9 / 10 watt , 6000K lineer and compact with decorative grey end caps , polycarbonate body and ribbrd opal diffuser complete fitting with Lamp & all other accessories fitting arrangment complete all as per manufacturer's instructionons and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
18
-
-
... More
Supply and Fixing Wall mounted / Surface mounted Energy Efficient Astheitically designed Bulkhead made of polycarbonate with and including LED 10/12 Watt complete fitting with LED Lamp and all other fixing accessories complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Supply and fixing LED building Security light 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Material and Labour for Sub main wiring concealed PVC conduit with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid existing PVC conduit medium quality of size 25 mm bore conforming to 3537 Part-I ISI marked including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length.
380
-
-
... More
Material and Labour in replacement for Sub main wiring concealed PVC conduit with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid New PVC conduit medium quality of size 25 mm bore conforming to 3537 Part-I ISI marked including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length.
120
-
-
... More
Material & Labour in repair Galvanised Irom medium grade pipe of 15mm bore with all fittings laid in floor or trenches / fixed on wall complete all as specified and directed by Engineer-in- charge
24
-
-
... More
Material and Labour for earth continuty conductor or main earthing lead of dia 4mm galvanised iron fixed on wall on batten or recesses or chases or buried in ground or drawn in conduit pipe or any other indicated situation for connecting to earthing lead between earthing and MCCB/MCB DB complete all as specified and directed.
30
-
-
... More
Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia medium grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia medium grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
3
-
-
... More
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%