Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 1,89,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695121_1Tender No
CWE BTD/TOKEN-25/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Material and labour for rendering 5 mm thick in cement mortar in 1:3 on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
800
-
-
... More
Material and Labour for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge.
800
-
-
... More
Material and Labour for preparing of old plastered or unplastered surface on ceiling and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge.
520
-
-
... More
Material and Labour for complete removal of existing treatment on old internal wall surfaces of any description, prepration of surface with mechanical means/ginder with and including applying acrylic wall care putty on internal surfaces of walls (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc. and with and including applying 02 coats of interior emulsion paint ( shade as approved by GE ) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces with over and including one coat of interior emulsion primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
3524
-
-
... More
Material and Labour for prepration of new plaster surfaces of internal wall of any description, prepration of surface with mechanical means/ginder with and including applying acrylic wall care putty on internal surfaces of walls (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc and with and including applying 02 coats of interior emulsion paint ( shade as approved by GE ) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces with over and including one coat of interior emulsion primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
1200
-
-
... More
Material and Labour for prepration of new plaster surfaces of external walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc of any description, prepration of surface with mechanical means/ginder with and including applying acrylic wall care putty (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc and with and including and applying 02 coats of exterior emulsion paint ( shade as approved by GE) with highlighter of any approved shade, @ 10 sq.m/litre/2 coats by using roller to external walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces with over and including one coat of exterior emulsion primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.
. Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
1000
-
-
... More
Material and Labour for complete removal of existing treatment on old external walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc of any description, prepration of surface with mechanical means/ginder with external walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc of any description, prepration of surface with mechanical means/ginder with and including applying acrylic wall care putty (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc and with and including and applying 02 coats of exterior emulsion paint ( shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces with over and including one coat of exterior emulsion primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.
. Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.
1142
-
-
... More
Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge.
150
-
-
... More
Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge.
100
-
-
... More
Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each complete all as specified and as directed by Engineer-in- charge.
50
-
-
... More
Supply and fixing Pressed steel frames for doors with one or more rebates with and including including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm,with and including one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.2. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
288
-
-
... More
Supply and fixing Pressed steel frames for doors with one or more rebates with and including lock strike plate, fixing lugs, etc., size of frame 105mm x 60mm,with and including one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.2. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account.
345
-
-
... More
Material and labour for PCC 1:3:6 , Type C1 , using 20mm graded stone aggregates as in filling back of pressed steel door frames,chowkhats and for fixing hold fasts, etc. complete all as specified and as directed by Engineer-in-charge.
4.33
-
-
... More
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge
230
-
-
... More
Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
66
-
-
... More
Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge.
109
-
-
... More
Supply & fixing 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in- charge.
127
-
-
... More
Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .
Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.
(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly.
(iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill .
1300
-
-
... More
Material and Labour for preparing new or previously untreated steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and as directed by Engineer-in- charge.
20
-
-
... More
Supply & fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in- charge.
177.2
-
-
... More
Supply and fixing 100mm long stainless steel butt hinges with stainless steel screws complete all as specified & directed by Engineer-in-charge.
144
-
-
... More
Supply and fixing aluminium anodised barrel tower bolts of extruded section, 100 mm long complete all as specified and as directed by Engineer-in-charge.
48
-
-
... More
Supply & fixing continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and as directed by Engineer-in- charge.
60.8
-
-
... More
Supply & fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
Supply & fixing Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed length of bolt complete all as specified and as directed by Engineer-in- charge.
216
-
-
... More
Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge.
40
-
-
... More
Supply & fixing in repair 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge.
72
-
-
... More
Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-charge.
384
-
-
... More
Supply and fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed as in cupboards etc to catch support shutters of best quality all as directed by Engineer-in- charge.
430
-
-
... More
Supply and fixing in repairs Magic eye for flush/panelled door shutter etc complete all as specified and as directed by Engineer-in-charge.
48
-
-
... More
Supply & fixing 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.
216
-
-
... More
Supply and fixing in repair Mortice lock 4 levers , vertical type, size 100 mm alumunium , etc complete all as specified and directed by Engineer-in-Charge.
48
-
-
... More
Supply & fixing for 4 mm thick, sheet glass ordinary quality and glazing in square not exceeding 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
96
-
-
... More
Supply & fixing 4 mm thick Figured glass pin head type and glazing in square n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in- charge.
18
-
-
... More
Material and labour for mild steel Framed work Fe-290 (Gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and as directed by Engineer-in- charge.
1300
-
-
... More
Supply & fixing for mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge.
1200
-
-
... More
Material and Labour for preparing new or previously untreated steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in- charge.
50
-
-
... More
Material and Labour for preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in- charge.
10
-
-
... More
Material and labour for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge.
504.6
-
-
... More
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge.
165
-
-
... More
Supply & fixing of 18mm thick HDHMR board UV coating, exterior grade, with and including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistance, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engineer-in-charge.
135
-
-
... More
Supply & fixing of 18mm thick UV coating, MDF board exterior grade, Both side laminated with and including 9 layer melamine sheet of any colour anti fungal, moisture resistance, anti borer, as per IS 14587 for kitchen/Cupboards shelves complete all as specified and directed by Engineer-in-charge.
30
-
-
... More
Supply & fixing Fancy type handle having a length of 250mm for stainless steel cabinet / drawers complete all as specified and directed by Engineer-in-charge.
120
-
-
... More
Supply & fixing of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and directed by Engg-in-charge.
400
-
-
... More
Supply and fixing or laying 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking down old GI tubing 20mm bore and fittings complete all as specified and as directed by Engineer-in- charge.
360
-
-
... More
Supply and fixing or laying 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking down old GI tubing 25mm bore and fittings complete all as specified and as directed by Engineer-in- charge.
600
-
-
... More
Material and Labour for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth, for brick walls and as directed by Engineer-in- charge.
50
-
-
... More
Supply and Fixing in repairs 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
Supply and fixing in replacement 15mm bore stop valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for iron pipe complete, all as specified & directed by Engineer-in-charge.
96
-
-
... More
Supply and fixing in replacement 15mm bore Stop valves,fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfor iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
24
-
-
... More
Supply & fixing in replacement 20mm bore Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for iron pipes complete all as specified and as directed by Engineer-in-charge.
48
-
-
... More
Supply and fixing in repair pillar tap cast copper alloy with capstan head, chromium plated, fancy type, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.
24
-
-
... More
Supply and fixing in repairs brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply & fixing in repairs PVC waste pipe of 32/40mm dia with socket suitable for connection to Waste fittings , and of length minimum 75 cm complete all as specified and directed by Engineer-in-charge.
72
-
-
... More
Supply and Fixing in repairs PVC connection 15 mm size of length 450 mm with brass check nuts and washers complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
Supply and fixing vitreous china (white) squatting pan 'Orissa' pattern, white, size 580mm x 440 mm, with integral foot rest including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply and fixing in repairs Vitreous china wash hand basin, white, flat back, size 450mm x 300 mm including cast iron cantilever bracket ,32 mm dia brass waste coupling and including fixing of trap, waste fitting and union complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply and fixing sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply and fixing Stainless steel plate rack of size 900mm x 600mm x 250mm and thickness of Stainless Steel strip of 1mm fixed on wall etc. complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Material and Labour for Cutting holes in brick walls built in cement mortar (not exceeding half brick) for inserting hold fast and making good dismantled portion in CM 1:3 or Cement concrete 1 : 2 : 4 , type B1 as required , depth of embedded portion exceeding half brick walls and not exceeding one brick of hold fast or lugs measured from the face of the jamb into walls complete all as specified and as directed by Engineer-in- charge.
192
-
-
... More
Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed Supply and fixing
24
-
-
... More
Supply and fixing in repairs CP stainless steel grating (with or without waste hole), 125mm size, complete all as specified and directed Supply and fixing.
72
-
-
... More
Supply and fixing in repairs Stainless steel drapery rod (conduit) of dia not less than 25mm and 1 mm minimum thickness of rod, including brackets / side holders etc as per site requirement fixed to walls with rawl plugs and steel screws complete all as specified and as directed by Engineer-in-charge.
350
-
-
... More
Supply and Fixing in repairs, chromium plated stainless steel soap tray of approx size 150 mm dia and fixed on wall with chromium plated brass screws complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing 110 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet 1/1 of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old AC eaves gutters and rainwater pipes ( of any size and pattern), including all fittings, compete all as specified and as directed by Engineer - in-charge.
210
-
-
... More
Supply and Fixing 75 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet 1/1 of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old AC eaves gutters and rainwater pipes ( of any size and pattern), including all fittings, compete all as specified and as directed by Engineer - in-charge.
96
-
-
... More
Supply and Fixing 110 mm bore of pipe PVC (SWR) type B bends of any radius / shoe fixed to PVC pipes complete all as specified and as directed by Engineer-in-charge.
48
-
-
... More
Supply and Fixing 75 mm bore of pipe PVC (SWR) type B bends of any radius / shoe fixed to PVC pipes complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply & Fixing in repairs Branch pieces, PVC SWR Type B single 110 mm bore, equal or unqual, (Y, T, etc) complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply & Fixing in repairs Branch pieces, PVC SWR Type B single 75 mm bore, equal or unqual, (Y, T, etc) complete all as specified and as directed by Engineer-in-charge.
12
-
-
... More
Supply and Fixing in repair 110mm bore PVC (SWR) Type B WC connector with lip ring/bent type fit WC outlet complete all as specified and directed by by Engineer-in- charge.
24
-
-
... More
Supply and Fixing in repair 110mm bore PVC (SWR) Type vent cowl complete all as specified and directed by Engineer-in- charge.
12
-
-
... More
Supply and Fixing in repair 75mm dia PVC SWR Type-B, floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1, using 20mm graded stone aggregates complete complete all as specified and as directed by Engineer-in-charge.
12
-
-
... More
Supply and Fixing in repair 110mm dia PVC SWR Type-B, floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1, using 20mm graded stone aggregates complete complete all as specified and as directed by Engineer-in-charge.
12
-
-
... More
Supply & fixing in repairs Rotational Moulded Polyethylene water storage tank ISI Marked of capacity 500 litres (cylindrical vertical, with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- Ball valve and gate valve shall be measured & paid separately under appropriate items of Schedule 'A' BoQ.)
24
-
-
... More
Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge.
24
-
-
... More
Material and labour for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-Charge.
500
-
-
... More
Material and Labour anti slip coloured ceramic tiles 7mm to 8 mm thick (square/rectangular) of Size 400mm x 400mm in floors and Skirting etc. including 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed by Engineer-in-charge.
180
-
-
... More
Material and labour 25mm thick cement concrete type B-1, 1:2:4 (12.5 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed by Engineer-in-Charge.
400
-
-
... More
Material and Labour for providing and laying Premium (1st quality) straight edge,Stain free, glooss finish, Square Double charged vitrified tiles size in 600mm x 600mm x 9mm to 10mm thick as in floors etc. shade as approved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
850
-
-
... More
Material and Labour for providing and laying Premium (1st quality) straight edge,Stain free, glooss finish, Square Double charge vitrified tiles size in 600mm x 600mm x 9mm to 10mm thick as in skirting surfaces shade as approved by GE , set and jointed with using spacer and approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477 : 2019 type 2T “Adhesives for use with Ceramic, Mosaic and stone Tiles” Conforms to EN 12004: 2017 and is a normal cementitious adhesives (C1) with slip resistance (T) of class C1 and necessary grouting as per manufacturer’s instruction, completed all as specified and directed by engineer-in-charge.
110
-
-
... More
Supply and Fixing glazed ceramic coloured tiles 7.5 mm to 8.5 mm thick 600mm x 300mm size in verticle surface including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge
650
-
-
... More
Material and labour for machine cut kota stone slab flooring18-22mm thick laid over with and including 15mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
80
-
-
... More
Material and labour for machine cut kota stone slab flooring18-22mm thick laid over with and including 10mm thick cement rendering in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
6
-
-
... More
Material and Labour for Reinforced cement concrete,Nominal Mix,1:2:4, Type-B1, using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including proper compaction by using mechanical viberator complete all as specified and directed. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
6
-
-
... More
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
480
-
-
... More
Material and labour for Formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
20
-
-
... More
Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.
34.6
-
-
... More
Material and Labour Brick work with sub class ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.
30
-
-
... More
Material and labour Brickwork with sub class 'B' old size burnt clay bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
40
-
-
... More
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
77
-
-
... More
Material & Labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
60
-
-
... More
Material and labour for Cement Concrete (1:5:10), type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors , filling in sunken floors etc. complete all as specified and as directed by Engineer-in-charge.
7
-
-
... More
Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc
2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc
3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture.
4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm.
5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat.
6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm.
7. Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry).
40
-
-
... More
Material and labour for 100 mm thick cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed by Engineer-in-charge.
100
-
-
... More
Material and Labour for machine pressed precast interlocking paver block 60 mm thick with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over and including 25 mm thick layer of sand cushioning complete all as specified and as directed by Engineer-in- charge. Note: The rate of 25mm thick layer of sand cushioning is included in this item and nothing shall be paid extra on this account.
100
-
-
... More
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc Laid dry or bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
4
-
-
... More
Material and labour for marble work (Udaipur green slabs) not less than 18 mm to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified including rounding the edges over with and including 15mm thick screed in cement mortar 1:4 complete all as specified and directed
40
-
-
... More
Dismantling of brick tiles or terracing tiles single layer on roof , disposal of retrieved material and stacking properly as directed by Engineer-in- charge.
625
-
-
... More
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge.
50
-
-
... More
Material and labour for cement slurry @ 1.2 kg /sqm spreading with bristle brush and rendering 15 mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid water proof compound shall be measured and paid separately.
625
-
-
... More
Supply only Liquid water proof compound shall be measured and paid separately.
100
-
-
... More
Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:
(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means
(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.
(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.
(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.
(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.
(f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL
Tensile Strength 1.5 MPa ASTM D412
Elongation at Break 200% ASTM D412
Adhesion in Peel 1.5 MPa (on concrete substrate) EN 1542
Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305
Permeability to Water Vapour Passes IS 2645
Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96
Water Absorption 10% ( by Mass) ASTM D570
Microbiological Resistance No Algae & Fungal Growth ASTM D5590
Solar Reflectance Index 102 ASTM E1980.
Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key.
Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE.
625
-
-
... More
Material and Labour for Making benching with PCC 1:2:4 type- B0, using 12.5mm graded stone aggregates using with Liquid Water Proof compound as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note : Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.
10.35
-
-
... More
Supply & Fixing 32mm dia PVC SWR Type B 'P' trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20mm graded stone aggregates complete all as specified and as directed by Engineer-in-charge.
24
-
-
... More
Supply and fixing 125/110 mm bore PVC (SWR) Type B gully trap in square, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-charge.
12
-
-
... More
Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge
120
-
-
... More
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete)of any dia set in cement laid in trenches incl all fittings & accessorises complete all as specified and as directed by Engineer-in- charge.
60
-
-
... More
Excavation in trenches not exc 1.5 meter wide and not exc 1.5 meter depth for foundation etc or for shafts , wells, cesspits, manholes , septic tank, for laying of cables etc not exceeding 10 Sqm on plan and not exc 1.5 meter depth and getting out in soft/loose soil etc complete all as specified and as directed by Engineer-in- charge.
27
-
-
... More
Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
9.82
-
-
... More
Removing surplus excavated material exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer-in-charge.
17.18
-
-
... More
Supply and laying DWCPE (SN 8) drain pipes 150 mm nominal dia as per IS-16098 (Part-II), laid in trenches on bed including all accessories/ fittings/ jointed ring, jointing and testing complete all as specified and as directed by Engineer-in- charge.
Note:- Excavation , earth work, bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A'
60
-
-
... More
Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested including form work complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.
58
-
-
... More
Material & Labour for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in aproncomplete all as specified and as directed by the Engineer-in-Charge.
210
-
-
... More
Material & Labour for ATT At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed by the Engineer-in-Charge.
240
-
-
... More
Material & Labour for ATT Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by the Engineer-in-Charge.
450
-
-
... More
Material and labour for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and as directed by the Engineer-in-Charge.
10
-
-
... More
Material and labour for Cutting into existing manholes for connecting new drains for internal diameter of pipe 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed by Engineer-in- charge.
8
-
-
... More
Supply , Providing and fixing chicken wire mesh ( Murga jali ) in cement plaster or over joints of R.C.C and brickwork or as per site requirement of 24 gauge & 12 mm mesh and 300 mm width for construction joints and chasing in brick work for electrical conduits or water supply pipes and pegs/nails with nailing machine as required before rendering / plastering etc. complete as per site requirement complete all as specified and as directed by Engineer-in- charge.Note: Rendering / plastering shall be measured and paid seperately under appropriate item of Schedule'A' BoQ here-in- before. Nothing shall be paid extra on account of Rendering / plastering in this item.
50
-
-
... More
Material and Labour for Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete all as per manufacturer’s instructions, complete all as specified and as directed by Engineer-in-charge.
Note :- Mode of measurement : per sqm of breaking area of concrete only.
50
-
-
... More
Material and Labour for Providing and application of Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength 1N/sqmm according to ASTM C 882-78 complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.
Note :- Mode of measurement: per sqm of application area of concrete.
50
-
-
... More
Material and Labour for Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment , including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.
75
-
-
... More
Material and Labour for Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength = 50 N/sqmm (28 days) according to ASTM C 109; flexural strength = 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.
100
-
-
... More
All as per Srl item No 128.00 here-in-above but for each additional 10mm uniform thickness for subsequent layers.
100
-
-
... More
Material and Labour for Drilling Holes of 12mm dia up to 100 mm deep holes in slab at the interval of 300 mm or as directed by Enginner-in-charge in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as per manufacturer's instructions ,complete all as specified and as directed by Engineer-in-charge.
100
-
-
... More
Material and Labour for Supply , Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout for column, beam and roof slab having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength = 70 N/sqmm (7 days) according to ASTM D 695; Tensile Strength = 30 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv ) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as per manufacturer's instructions, complete all as specified and as directed by Engineer-in-charge.
Note :- Mode of measurement: per kg of material consumed.
75
-
-
... More
Material and Labour for Rebuilding the section of damaged RCC/PCC elements to original size in thickness upto 100 mm by supply nd casting with ready to use non shrink cemneticious free flow micro concrete having compressive strength = 50 N/sqmm (28 days) according to ASTMC 1107-99; including mixing , placing and levelling the surface by granding of cementicious sslurry or cementicious joiints difference if any and curing incl necessary form work , complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.
200
-
-
... More
Supply and Fixing in repair 15mm bore, brass Chromium Plated central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing 15mm bore Brass Chromium Plated sink mixer for mixing hot & cold water screwed down for iron pipe and fixed regular swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no. 136.00,137.00,138.00,139.00,140.00 & 141.00 of BoQ.
564
-
-
... More
Material and labour for concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), in PVC conduit complete with 2.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through with and including PVC rigid conduit 20mm dia ( heavy duty ) ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable length and 1.2mm thick ) and flush fixed with cement mortar 1:4 , 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc with and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge .Note for serial item no.136.00,137.00,138.00,139.00,140.00 & 141.00 : (i) switches , sockets , two way switch , call bell switch and call bell & fan regulator shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. (iii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips as directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account.
342
-
-
... More
All as per item No 136.00 here- in -before but for one socket outlet 3 pin, 5/6 Amp 230 volts flush type on same board complete all as specified and as directed by Engineer-in- charge.
72
-
-
... More
All as per item No 136.00 here- in -before but for one socket outlet 3 pin, 5/6 Amp 230 volts flush type on independent board complete all as specified and as directed by Engineer-in- charge.
72
-
-
... More
All As per item No 136.00 here- in- before but for call bell point, complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
All as per item No 136.00 here- in- before but for one light point controlled by two two way switch complete all as specified and as directed by Engineer-in- charge.
6
-
-
... More
All as per item No 136.00 here -in- before but for one socket outlet 6 pin, 6/16 Amp 2 in 1 with cable 2.5 sqmm multistranded copper conductor FRLSH cable on the independent board including provn of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continues as earth wire connected to earth dolly complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
Supply and Fixing switch piano flush type 5/6 Amp, ISI marked 230V AC, single pole, one way complete all as specified and as directed by Engineer-in- charge
486
-
-
... More
Supply and Fixing Switch piano flush type , single pole, one way, 15/16 Amp ISI mark complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
Supply and Fixing switch piano flush type 5/6 Amp, ISI marked 230V AC, single pole, two way complete all as specified and as directed by Engineer-in- charge
12
-
-
... More
Supply and Fixing Socket outlet 3 pin, 5/6 Amp 250 volts flush type complete all as specified and as directed by Engineer-in- charge.
144
-
-
... More
Supply and Fixing Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engineer-in- charge.
48
-
-
... More
Supply and Fixing Bell push switch, flush type, 5 Amp,ISI marked 230V AC complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
Supply and Fixing stepped type electronic fan regulator flush type complete all as specified and as directed by Engineer-in- charge.
72
-
-
... More
Supply and Fixing ceiling rose surface bakelite 65 mm x 50 mm with three terminal complete all as specified and as directed by Engineer-in- charge.
258
-
-
... More
Supply and fixing Electronic Bell, ding dong type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
Supply and Fixing lamp holder PVC/ polycarbonate type with back plate suitable for batten fitting with LED bulb 5 watt complete all as specified and as directed by Engineer-in- charge.
96
-
-
... More
Material and Labour for Sub main wiring with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-
(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.
240
-
-
... More
Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 12 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.
24
-
-
... More
Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) TPN 4 way, 415 V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.
6
-
-
... More
Supply and fixing MCB ‘C’ curve suitable for 230 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-charge
270
-
-
... More
Supply and fixing MCB 32 Amps, SPN 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment complete all as specified and directed by Engineer-in-charge.
24
-
-
... More
Supply & fixing RCBO for Earth Leakage, Overload & Short circuit Protection 415 V, 40/63 Amp, AC type, 10 KA four pole , 30mA ISI marked complete all as specified and directed by Engr-in-charge.
6
-
-
... More
Supply & fixing wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete all as manufacturer's instructions with and including making connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and directed by Engineer-in-charge.
108
-
-
... More
Supply and Fixing wall mounted LED batten fitting 10 (±10%) watt, 6500K, 0.6m, decorative ultra slim, square profile, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete all as manufacturer's instructions with and including connection with with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as manufacturer's instructions ,as specified and as directed by Engineer-in-charge.
72
-
-
... More
Supply and Fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection with and including bracket made out with 40mm bore Galvanised Iron Light grade pipe 1.20 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with and including connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as manufacturer's instructions ,as specified and as directed by Engineer-in-charge.
6
-
-
... More
Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
12
-
-
... More
Taking down carefully existing electric/electronic meter from qtrs, depositing meters safely to E/M store yard and refixing after carrying out repair complete all as specified and as directed.
24
-
-
... More
Taking down unserviceable ceiling fans 1200 mm /1400 mm sweep 230 V AC, single phase , dismantling the ceiIing fan and rewinding with super enameled copper winding wire of existing gauge & size including throughly cleaning all the component of fan, oiling, varnishing with and including replacement of rusted/ unserviceable nuts, bolts, split pin. rubber reel, and connection with flexible twin core copper cable of size 23/.00076 approximate one meter long for each fan, machine screws and complete painting along with blades of fan as per satisfication of Engineer-in-charge and refixing the to respective units complete all as specified and directed by Engineer-in-charge .
72
-
-
... More
Dismantling & taking down of existing geyser and deposit to E/M store yard safely & refixing the same ( after carrying out repair work/rewiring in Accn) complete all as specified and directed by engr-in charge.
32
-
-
... More
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%