Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 99,800Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Renovation Of Lab Counters And Display Cabinets Of Kv No 4 And Spl Repair Of Bldg No P-789 Under Age B/r-v And Age E/m-v Of Ge (n) Bathinda At Bathinda Mil Stn
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_649154_2Tender No
8938/NIT-86/23-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply and fixing factory made 105mm x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including one shop coat of zinc chromate primer paint including supply and fixing necessary lugs and lock strike plate, etc. , including fixing butt hinges suitable Nos. as directed for each leaf, complete all as specified and as directed by Engineer-in- charge. Note : - (i) Butt hinges shall be measured and paid separately under appropriate item of BOQ as supply only.
185
-
-
Material and Labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in back filling of pressed steel chowkhats single or double rebated or for fixing hold fasts etc complete all as specified and as directed by Engineer-in-charge.
0.2
-
-
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
38.4
-
-
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, fixed in opening using MS screw 75mm long with PVC fastener including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.
50
-
-
Supply & fixing aluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
14
-
-
Supply & fixing 150mm long, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in- charge.
4
-
-
Material and labour for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge.
89
-
-
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer primer complete all as specified & directed by Engineer-in- charge.
52.2
-
-
Material and labour for preparation of old wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified & directed by Engineer-in- charge.
28
-
-
Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified & directed by Engineer-in- charge.
65
-
-
Supply and fixing 4mm thick sheet glass ordinary quality & glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge.
10
-
-
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, oil putty complete all as specified & directed by Engineer-in- charge.
10
-
-
Taking down 15 mm bore galvanised iron tubing and removal from site complete all as specified and as directed by Engineer-in-charge.
40
-
-
Taking down 20 mm bore galvanised iron tubing and removal from site complete all as specified and as directed by Engineer-in-charge.
40
-
-
Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings with cutting and chasing complete all as specified and directed by Engineer-in-Charge.
40
-
-
Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings with cutting and chasing complete all as specified and directed by Engineer-in-Charge.
40
-
-
Supply and fixing in replacement stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
30
-
-
Supply & fixing 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
42
-
-
Supply and fixing fancy type chromium plated bib taps, long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relivent IS.
5
-
-
Supply and fixing in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/Sqcm fixed to wall or floor etc including fittings complete all as specified and as directed by Engineer-in-Charge.
15
-
-
Supply and fixing 32mm dia, waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and as directed by Engineer-in-charge.
18
-
-
Supply and fixing swan neck wash basin Brass CP mixer for mixing hot & cold water screwed down for 15mm bore pipe and fixed complete all as specified and as directed by Engineer-in-charge.
18
-
-
Supply & fixing in chromium plated round Grating doom 100 mm dia with waste hole complete all as specified and as directed by Engineer-in-charge.
18
-
-
Supply and fixing 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engineer-in-Charge.
45
-
-
Supply only 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in- charge.
33
-
-
Supply and fixing drawer pulls 3 screw plate and fixed dished pull 80 to 100mm long cast iron or mild steel complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply and fixing Hasp and staple 100mm mild steel, wire type, stove enamelled black including bolt to hinge plate fixed with screws complete all as specified and directed by Engineer-in-Charge.
20
-
-
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position complete all as specified and as directed by Engineer-in-Charge.
33
-
-
Material and labour for 100mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and as directed by Engineer-in-charge.
10
-
-
Demolition Stone slabs/marble slabs and tiles of any description or thickness as in floors/cooking plateform/steps, aprons etc laid dry or bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
9.3
-
-
Material and Labour for light shade, vitrified ceramic tiles of size 600mm x 600mm, 10 mm thick (square), polished, in floors etc set and jointed in neat cement slurry @ 3kg/ Sqm and pointed in white cement with pigments to match the shade of tiles laid over and including 15 mm thick Screed bed or bedding layer in CM (1:6) in white cement with pigments complete all as specified and as directed by Engineer-in- charge. Note: Only coarse sand shall be used in screed bed.
745
-
-
Material and Labour for light shade, vitrified ceramic tiles of size 600mm x 600mm, 10 mm thick (square), polished, on vertical surfaces as in skirting etc set and jointed in neat cement slurry @ 3kg/ Sqm and pointed to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4) in white cement with pigments to receive the tiles complete all as specified and as directed by Engineer-in- charge.
73
-
-
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
35
-
-
Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces such as skirting/dados and riser to steps etc of size 450mmx300 mm x7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including rendering 10mm thick plaster in CM 1:4 for rough finish to receive tiles on vertical surfaces complete all as specified and as directed by Engineer-in-charge.
215
-
-
Material and labour for granite (of any type) work 18-20 mm thick (table rubbed and polished) of approved colour in steps, jambs, pillars, window cills, counter sunk wash basin, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including Material and labour for 15 mm thick screed in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge. Note:- Sample of granite for Shade and type shall be approved by GE before procurement.
100
-
-
Material and labour for 18-20mm thick any of black/mahroon colour of marble work other than (table rubbed and polished) as in counter sunk wash basin, steps, jambs, pillars, window cills, cooking platforms and like, set and including screed bed 15mm thick in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of marble slab, including machine cutting to make it square or rectangular or as per site requirement including cleaning and extra polishing if required, complete all as specified and as directed by Engineer-in-Charge.
38
-
-
All as per above item No 38 but as in skirting/dado/riser etc including 10mm thick rendering in Cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
3
-
-
Material and labour for moulding the edges half round on exposed side (Rounding to edges of stone slabs one edge) of granite/marble as in kitchen shelf, cooking platform WHB counter, steps and other similar situations etc complete all as specified and directed by Engineer-in-Charge.
20
-
-
M&L for PCC (1:3:6) type C-0 using 12.5mm graded aggregate as in back filling of chowkats and for hold fast complete all as specified and directed by Engineer-in-Charge.
1
-
-
Material and labour cutting holes in brick walls in cement mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement mortar 1:2:4 type B1 using not exc half brick walls depth embeddded portion of holdfast or lugs for coller stand, measured from the faces jamb into walls complete all as specified and directed by Engineer-in-Charge.
72
-
-
Taking down cement plaster of any description on brick or concrete surfaces, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in- charge.
1045
-
-
Material and Labour for rendering 15 mm thick (matching with existing plaster thickness) in cement mortar (1:6) on other than fair face of brick work or concrete surfaces of walls and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
610
-
-
Material and Labour for rendering 15 mm thick (matching with existing plaster thickness) in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge.
285
-
-
Material and labour for rendering/plastering 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
150
-
-
Material and labour for newly plastered of walls applying two coats of oil bound distemper (washable) over a coat of alkali resistant priming paint on plastered surfaces complete all as specified and as directed by Engineer-in-Charge.
360
-
-
Material and labour preparation for old plastered of walls applying two coats of oil bound distemper (washable) complete all as specified and as directed by Engineer-in-Charge.
100
-
-
Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces and applying two coat of oil bound distemper with (paint brush /with roller) complete all as specified & directed by Engineer-in- charge.
150
-
-
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying 2mm thick wall care putty to make the surface smooth and glossy upto the entire satisfaction of Engineer -in-Charge and after reparing the surface smooth applying two coat of olil bound distemper with roller only complete all as specified and as directed by Engineer-in-Charge.
50
-
-
Material and labour for preparation of New plastered/ concrete surface of wall/Pillars/cornices by brooming down with using broom/sand papering or by other means, and preparing the surfaces smooth by applying 2mm thick wall care putty to make the surface smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engr-in-Charge and after preparing the surface applying two coats of plastic emulsion paint (with roller brush ) complete all as specified and as directed by Engineer-in-Charge.
250
-
-
Matterial and labour for complete removal of existing treatment (any layers of existing treatment) and efflorescence from Old decorated surface of wall/pillars/cornices by scraping down with using Mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-Charge brooming down and preparing the surfaces smooth and make good by applying 2mm thick wall care puty with white cement based, sanding the surface by Mechanical sander machine to make the surface even and smooth upto entire satisfaction of Engineer -in-Charge and after that appplying two coat of plastic emulsion paint (with roller brush only) complete all as specified and directed by Engineer-in-Charge.
100
-
-
Material and labour for preparation of Newly plastered/ concrete surface of wall/Pillars/cornices by brooming down with using broom/sand preparing or by tany other means, and preparing the surfaces smooth by appling one coat of primer and applying one coat of 2mm thick wall care putty the surface even and smooth by using sander Machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and after preparing the surface applying three coats of acrylic smooth exterior emulsion paint, as approved tint/colour by using paint roller brush complete all as specified and directed by Engineer-in-Charge.
280
-
-
Material and labour for complete removal of existing treatment (any layers of existing treatment) effloresence from old decorated surface of wall/pillars/cormices by scraping down with using Mechanical sander machine(including provision of dust sucking) upto entire satisfaction of Engineer-in-Charge brooming down and preparing the surfaces and after that applying two coats of acrylic smooth exterior emulsion paint as approved tint/colour by using paint roller brush only complete all as specified and directed by Engineer-in-Charge.
50
-
-
Dismantling and disconnecting of existing CI soil vent pipe 75/100 mm bore fixed to wall, laid in trenches including all fittings & accessories complete all as specified and as directed by Engineer-in-charge.
25
-
-
Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun cast pipe ) in any length with or without ears, laid in trenches or in floor jointing with cement mortar, including taking out old unserviceable pipe, complete all as specified and as directed by Engineer-in- charge.
25
-
-
Supply & fixing 75mm bore cast iron bends (any radius)/elbow, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge.
2
-
-
Supply & fixing in replacement white or coloured vitreous china laboratory sinks with plugs, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe upto 0.5 Sqm complete all as specified and directed by Engineer-in-Charge.
18
-
-
Material and labour cast iron floor trap 100 mm dia with grating, jointed to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engineer-in-Charge.
18
-
-
Supply and fixing 150x150mm size salt-glazed stoneware gully traps, square or round mouthed type 'P' far setting and jointing to drains with cement mortar 1:1 complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Demolition Brickwork of stone/boulder masonry, build in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
17
-
-
Material and Labour Brick work with sub class ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.
17
-
-
Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-charge
5
-
-
Material and Labour for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kitchen plateform slabs, of any thickness, size or shape including necessary formwork, set and jointed in cement mortar (1:4) complete all as specified and as directed by Engineer-in- charge.
5
-
-
Material and Labour for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in- charge.
540
-
-
All as per ser item above No 65 here-in-before but 6 to 8mm dia complete all as specified and directed by Engr-in-Charge.
30
-
-
Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
50
-
-
Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe upto and including 150 mm bore pipes, complete all as specified and directed by Engineer-in-Charge.
40
-
-
Supply and fixing Salt-glazed stoneware drain pipes 150mm bore (internal) of grade 'A' laid in trenches and jointed etc. complete all as specified and as directed by Engineer-in-charge.
10
-
-
Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in concrete bed of (SGSW/RCC) drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.
10
-
-
Material and labour cutting into existing manholes/septic tank for connecting new drain upto 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round to 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified & directed by Engineer-in-charge.
7
-
-
Supply and fixing Magnetic catcher for cup board etc to catch & support shutter, best quality complete all as specified and as directed by Engineer-in- charge.
35
-
-
Material and Labour for 20-25 mm thick Kota stone as approved by GE flooring/steps, mirror polished laid over 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge.
50
-
-
Material and Labour for machine cut kota stone slab as approved by GE as in vertical surfaces, 20-25 mm thick laid over and including 10 mm thick rendering in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge.
4
-
-
Supply and fixing 18 mm thick one side prelaminated decorative solid PVC boards as in cabinet/cupboard shutters & general purpose type fixed with screws to PVC frame work complete all as specified and directed by Engineer-in-Charge.
40
-
-
Supply and fixing wall mounting display cabinet of size (1.2 x 0.75 x 0.30 mtr) of 18/19 mm thick one side prelaminated decorative solid PVC boards with one vehicle support consisting of 02 Nos middle 8mm thick glass self & front side sliding 5.50 mm glass shutters including locking arrangement, handle and aluminium channels for sliding of glass, including all necessary fitting and fixing to wall arrangement complete all as specified and directed by Engineer-in-Charge.
40
-
-
Dismantling of Brick Tiles terracing in single layer on roof laid and pointed in cement mortar and removing / disposal off from the site complete all as specified and as directed by Engineer-in-charge.
300
-
-
Demolition of mud from roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing / cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding / parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.
24
-
-
Material and Labour for Roughening surfaces of existing concrete surfaces of roof by picking , sweeping , clean and washing down with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified and directed by Engineer-in-charge. Note: The rate of neat cement slurry @ 3.0 Kg of cement per Sqm is included in this item and nothing shall be paid extra on this account.
800
-
-
Material and labour for cement concrete (1:2:4) type B-0, using 12.50 mm graded stone aggregates as in roof padding including mixing with Water Proof Compound as per manufacturer's instructions and finished even and fair complete all as specified and as directed by Engineeer-in-charge.
Note :- Water Proof Compound shall be measured and paid for separately under respective item of Schedule'A' BoQ.
18
-
-
Supply only Water Proofing Compound complete all as specified.
75
-
-
Material and Labour for 15 mm thick screed bed or bedding layer in cement mortar (1:4) on roof surfaces, parapet or vertical beam surface (horizontal or vertical) finishing the surfaces even and fair complete all as specified and as directed by Engineer-in- charge.
300
-
-
Material and labour for tack coat layer of blown grade bitumen of any penetration applied hot @ 1.70 Kg per Sqm and priming the surface @ 0.30 Kg per Sqm and with and including material and labour for laying 3mm thick APP based polymer membrane of weighing not less than 3.5 Kg per Sqm reinforced with polyster non woven fabric (weight not less than 150 Gm per Sqm) laid on primed surface at by torch application with side overlap 75mm and end overlap 100mm and tucked into the chasesas a treatment for moderate condition complete all as specified and as directed by the Engineer-in-Charge. Note: The rate of 3mm thick APP based polymer membrane is included in this item and nothing shall be paid extra on this account.
24
-
-
Material and labour for PCC (1:2:4) Type B0 using 12.5mm graded stone aggregate as in roof kerb (golla) or mud stops, side of roof sheet & similar work etc rounded or chamfered on edges including necessary form work etc complete all as specified and directed by Engineer-in-Charge.
1
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed by Engineer-in- charge.
566
-
-
Material and Labour for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, surface finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
50
-
-
Material and labour for 75mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge.
380
-
-
Material and Labour machine pressed precast concrete coloured interlocking paver block any shape, size and pattern, IS - 15658-2006 (Marked) of 60 mm thickness of M-35 grade with grey cement & pigment complete all as specified and as directed by Engineer-in-charge.
380
-
-
Material and Labour for sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed by Engineer-in-charge.
10
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and and removal from site complete all as specified and as directed by Engineer-in-charge.
20
-
-
Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass to be measured and paid separately.
21
-
-
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed by Engineer-in-Charge.
8
-
-
Supply and fixing anodised aluminium handle cast type 125mm long complete all as specified & directed by Engineer-in-charge.
90
-
-
Supply and fixing anodised aluminium handle cast type 150mm long complete all as specified & directed by Engineer-in-charge.
12
-
-
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified & directed by Engineer-in-charge.
62
-
-
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified & directed by Engineer-in-charge.
12
-
-
Supply & fixing powder coated aluminium anodised frame, made out of aluminium section / aluminium chanel, powder coated (minimum thickness of powder coating not less than 50 micron), for doors, windows, ventilators with one or more rebate including jointing cleat for fixing etc. including taking down old unserviceable frame complete all as specified and as directed by Engineer-in-Charge.
Note :- Weight of aluminium section/aluminium channel shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site.
150
-
-
Supply & fixing anodised powder coated aluminium shutter for window /Ventilator/ door made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge.
Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ.
25
-
-
Material and labour for mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works complete all as specified and as directed by Engineer-in- charge.
200
-
-
Supply & fixing 5.5mm thick tinted sheet glass ordinary quality/figured glass pin head in squares not exceeding 0.5sqm in each pane and fixed with oil putty etc. as required or as directed complete all as specified & directed by Engineer-in- charge.
21
-
-
Supply & fixing mild steel 300mm long rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw complete all as specified & directed by Engineer-in- charge.
12
-
-
Supply & fixing in repair Floor door stoper (150mm) of aluminiuk alloy body and tngue, anodised , with hard drawn steel spring fixed in floor complete all as specified & directed by Engineer-in- charge.
18
-
-
Supply & fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
25
-
-
Demolition of cement concrete (unreinforced) in first floor, sunken portion and paving at any thickness below or above floor level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
3.5
-
-
Material and labour for sunken treatment to sunken floor, cleaning the surface by wire brush, rendering to floor and sides with 10mm thick in cement mortar (1:3) including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement, after that material & labour providing two coat of two components (one part liquid two part powder) ready to use cementitious water proofing coating on properly prepared surface by brushing having elongation of 50% for the applying water proofing treatment on horizontal and vertical surfaces of sunken floor, complete all as specified and as directed by Engineer-in-charge. NOTE:- (i) Applying 1st coat of two components modified polymer coating.
(ii) Provn of glass fiber mess of 2mm x 2mm immediately on alone coating.
(iii) Apply 2nd coat of two components modified polymer coating after 72 Hrs on horizontal and vertical surfaces.
30
-
-
Material and labour for 25mm thick cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floor, sunken floor etc, finished rough to receive tiles, including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only)
30
-
-
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately as Supply only
30
-
-
Material and labour for applying one coats of Dr fixit pidecrte in sunken floor portion of toilets and bathrooms chajja stair case etc by using of 1 to 2 Sqm and applying by brush etc, complete all as specified and as directed by Engineer-in-charge.
30
-
-
Material & Labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as loose filling of sunken floors complete all as specified and as directed by Engineer-in-charge.
3
-
-
Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay and jointing with cement mortar lead joint including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
35
-
-
Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun pipe) in any length with or without ears, laid on floor/trenches and jointing with cement mortar with lead joint including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
5
-
-
Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun pipe) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay and jointing with cement mortar lead joint including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
15
-
-
Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun pipe) in any length with or without ears, laid on floor and jointing with cement mortar including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge.
5
-
-
Material & Labour for 100 mm dia cast iron floor trap with CP grating including jointing to waste pipe with solvent fixed in lead joint /cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including taking out old floor trap complete all as specified and directed by Engineer-in-Charge.
6
-
-
Material & Labour for 75 mm dia cast iron floor trap with CP grating including jointing to waste pipe with solvent fixed in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including taking out old floor trap complete all as specified and directed by Engineer-in-Charge.
6
-
-
Supply & fixing in replacement 100mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge.
12
-
-
Supply & fixing in replacement 75mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge.
6
-
-
Supply & fixing in replacement 100mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with oval access door as specified & directed by Engineer-in- charge.
6
-
-
Supply & fixing in replacement 75mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with oval access door as specified & directed by Engineer-in- charge.
6
-
-
Supply and fixing 100mm bore cast iron traps, 'P' & 'S' complete all as specified and as directed by Engineer-in- charge.
6
-
-
Supply and fixing 100mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge.
6
-
-
Supply and fixing 75mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge.
6
-
-
Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, including dismantling/taking down old pipe complete all as specified and as directed by Engineer-in- charge.
35
-
-
Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
12
-
-
Supply & fixing 110mm bore PVC (SWR) 'Y'/'T' junction (double/ single ), equal or unequal (any radius) suitable pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
6
-
-
Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as required) and making good disturbed surfaces of walls including cutting and threading of existing pipe any dia for insertaion of tee branch including hole in wall to pass the pipe out side for connection as per site requirment including taking out of existing GI tubing complete all as specified and as directed by Engineer-in- charge.
120
-
-
Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as required) and making good disturbed surfaces of walls including cutting and threading of existing pipe any dia for insertaion of tee branch including hole in wall to pass the pipe out side for connection as per site requirment including taking out of existing GI tubing complete all as specified and as directed by Engineer-in- charge.
130
-
-
Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
6
-
-
Supply & fixing in replacement vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe including, supply & fixing of pillar tap, bracket and cutting for and pinning in end of bracket or erecting complete all as specified and as directed by Engineer-in-Charge.
6
-
-
Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern (white colour) with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe, PVC Connection 450 mm long with PTMT nuts suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.
6
-
-
Supply & fixing in replacement bathroom Cabinet Mirror size 450mm x 350mm selected quality glass, complete all as specified and as directed by Engineer-in-charge.
6
-
-
Dismantling/taking down of existing unserviceable PVC water storage tanks capacity exc. 500 litre but not exc. 1000 litre complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and including ball valve and gate valve, complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply & fixing in replacement gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.
6
-
-
Supply & fixing in replacement gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 15mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.
6
-
-
S&F in repair for chromium plated toilet paper holder complete fixed to wall complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing in replacement bib tap long body cast copper alloy, chromium plated fancy type, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
6
-
-
Supply & fixing in replacement Mixer valve 15mm bore, brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for WHB/Wall/Sink , screwed down for iron pipe 15mm bore complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of mixer valve shall be as given in SSR or in relevant IS.
6
-
-
Supply & fixing in replacement hand shower (health faucet) ABS body including 1 meter long 8mm dia flexible tube and including wall hook including taking down old any type shower complete all as specified and as directed by Engineer-in-charge.
6
-
-
S&F Glass sheet assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-charge.
6
-
-
Supply and fixing in replacement concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock shall be as given in SSR or in relevant IS.
6
-
-
Supply & fixing in replacement cromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
6
-
-
S&F CP grating doom 125mm dia with/without waste hole (min weight 40gms) complete all as specified and as directed by Engineer-in-charge.
18
-
-
S&F 19mm internal dia MS pipe with PVC coated drapery rod (Curtain Rod) of approved make including fenials and brackets for door and window including taking down old curtain rod and palmet box complete all as specified and as directed by Engineer-in-charge.
45
-
-
S&F MS cromium plated, soap tray approximate 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and as directed by Engineer-in-charge.
6
-
-
Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed by Engineer-in-Charge .
31.2
-
-
Material & labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate to drain pipe including packing under & haunching against the sides of pipe 150 mm dia ( internal) after they are laid and tested in trenches, complete all as specified and directed by Engineer-in-Charge.
30
-
-
Material & labour for 150 mm dia ( internal) Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches & jointed, complete all as specified and as directed by Engineer-in-Charge .
30
-
-
Material & labour for cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundations, fillings & mass concrete, sub base, plinth protection, complete all as specified and as directed by Engineer-in-charge.
2
-
-
Material & labour for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for manhole benching, flooring and coping, complete all as specified and as directed by Engineer-in-charge.
1
-
-
Supply & Fixed in repair SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation) size of cover 0.70 x 0.70 conferming to IS 12592, fixed in cement cocrete 1:2:4, complete all as specified and directed by Engineer-inCharge.
6
-
-
Returning/filling in including spreading, leveling, watering & well ramming in layers not exceeding 25 cm thick each, complete all as specified and as directed by Engineer-in-Charge.
17.51
-
-
Removal of excavated material to a distance not exceeding 50 metre and depositing where directed not exceeding 1.5 metre above the starting point, complete all as specified and as directed by Engineer-in-Charge .
13.69
-
-
Material and labour for 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet ,self for cupboard including cut edges of prelaminated board to be sealed with 6mm teak lipping and all necessary fittings including dismantling of board of any description and type complete all as specified and as directed by Engineer-in-charge.
30
-
-
Material and labour for 12 mm thick prelaminated partical board interior grade prelaminated both side with decorative choice lamination fixed with screw to timber frame work/aluminium frame work including dismantling of board of any size and type complete all as specified.
20
-
-
Supply and fixing 100mm long fency type Stainless steel handles, cast type, polished bright complete all as specified and directed
12
-
-
Supply and fixing 40mm dia, cupboard knobs fixed with nut, screw and washer of Brass, bright finished complete all as specified and directed
24
-
-
Demolition of RCC as in roof slabs (other than ground floors), beams, stair case, landing, chajjas, and similar suspended work (reinforcement cut as required to facilitate demolition) all as specified and directed by Engr-in-Charge
5
-
-
Material and Labour for RCC 1:2:4 Type B0 (12.5mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and as directed by Enginer-in-Charge. (Reinforcement will be measured and paid for separately)
3
-
-
Material and Labour for RCC 1:2:4 Type B0 (12.5mm graded stone aggregates) as in fins, fascias, louvers, parapets, and railings exc. 60cm in height, balustrade, and the like complete all as specified and as directed by Enginer-in-Charge.
Note:- (Reinforcement will be measured and paid for separately)
2
-
-
Material and Labour for use and waste of form work to sides and soffits of floor or roof beams, roof slabs, cantilevers, shelves etc and similar items rough finished surface complete all as specified and directed by Engineer-in-Charge
50
-
-
Use and waste of form work to sides and soffits of fins, louvers, fascia and similar items rough finished surface complete all as specified complete all as specified and directed by Engr-in-Charge
50
-
-
M&L for rough cast plastering including 15 mm thick rendering in cement plaster 1 :4 complete as specified in SSR Part-I clause 14.22 as given .Note : Rough cast finish : After applying under coat of cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1 shall be applied complete including taking down cement lime plaster and applying two coats of cement based paint over a coat of primerall as specified and as directed by the Engineer-in-Charge.
85
-
-
EM SCHUDLE 'A'
-
-
-
Taking down old unsv copper/aluminium/Modular point/submain wiring concealed / batten (light, fan, socket or power/submain) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
376
-
-
M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. Note : Wiring shall be done in proper colour coding.
400
-
-
M&L for point wiring for one light/fan/5 Amps independent socket point/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into an including new concealed PVC rigid/steel conduit 1.8mm wall thickness ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified. Note : (a) wiring shall be done by using proper colour coding
(b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.
91
-
-
All as per item No 167.00 above but for multi 5 pin 5 amp socket outlet on same board
20
-
-
All as per item No 167.00 above but for multi 5 pin socket outlet 5 amp socket on independent board
25
-
-
All as per item No 167.00 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsteathed copper conductor multistrand cable 1.5 sqmm as earth wire FRLS pvc insulated in green color all as directed by engr-in-charge.complete with new CI/pressed steel sunken black with hylum top sheet cover 3mm thick
20
-
-
Material and labour for point wiring complete modular type with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable for mounting modular switches and socket,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface, complete all as specified and directed by Engineer-in-charge.
114
-
-
All as per item No 171.00 here in before but for one socket outlet 5 pin 5 Amp on same board, complete all as specified and directed by Engineer-in-charge.
21
-
-
All as per item No 171.00 here in before but for one socket outlet 5 pin 5 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.
48
-
-
All as per item No 171.00 here in before but for one socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.
39
-
-
S & F in replacement Socket outlet 5 Pin, 5A, flush type complete all as directed
45
-
-
S&F in replacement of angle/batten lamp holder on PVC square Blocks with PVC insulated body complete all as directed
16
-
-
M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed.
16
-
-
S&F in replacement for switch piano, flush type single pole one way 5 Amp, 240 volts all as specified .
134
-
-
Supply and fixing modular Switch 6 Amps 250 volts AC one way ISI marked fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
183
-
-
Supply and fixing modular Socket 6 Amps 5 pin shuttered 250 volts fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
69
-
-
Supply and fixing Switch 16 Amps modular 250 volts AC ISI model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
39
-
-
Supply and fixing modular Socket 16 Amps 5 pin shuttered 250 volts fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.
69
-
-
Supply and fixing modular Fan step regulator, 120W - 2 module, complete all as specified and directed by Engineer-in-charge.
30
-
-
M&L switch piano flush button single pole one way 15 Amp all as specified
20
-
-
M&L socket outlet 6 pin 15 Amp 240 volt multi purpose flush typeall as specified
20
-
-
S&F in replacement Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet.
15
-
-
Supply and fixing in provision of BLDC (Brushless direct current motor) ceiling fan 5 star rated, complete with blades, down rods, and accessories, 230 Volts, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, including electrical connection providing twin core round copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge.
Note :- (i) Srl Number of ceiling fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Ceiling fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account
15
-
-
M&L for replacement distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as directed by Engr-in-Charge.
2
-
-
Supply and fixing ceiling rose 3 plate flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal, complete all as specified and directed by Engineer-in-charge.
157
-
-
S&F in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED duly fitted on pvc square block 6500K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz.
50
-
-
S&F in repair MCB single pole and Neutral 32 Amp suitable for 240 volt.
2
-
-
S&F in repair MCB single pole and Neutral 40-50 Amp suitable for 240 volt.
6
-
-
S&F in repair MCB single pole 5-32 Amp suitable for 240 volt.
20
-
-
S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 26 KA
1
-
-
S&F in replacement of Vertical TPN 4 way double door suitable for and including MCCB 125 Amp 26 KA four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type.
1
-
-
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) including taking out/dismantling old unserviceable earthing system complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.
1
-
-
Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete
8
-
-
M & L for LED Mirror light fitting of 9/10 watt, 6000 K , lineer & compact with decorative grey end caps,polycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector all as specified and directed.
4
-
-
Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at groung/First/Scond floor including plastering for making good to the original surfaces of any description disturbed including painting /distemper matching with the existing colour.
Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.
4
-
-
Making holes for 450 mm dia exhaust fan of suitable shape & size into or through brick walls at groung/First/Scond floor including plastering for making good to the original surfaces of any description disturbed including painting /distemper matching with the existing colour.
Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.
2
-
-
Supply and fixing of exhaust fan steel body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account
4
-
-
Supply and fixing of exhaust fan steel body 450 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account
2
-
-
Supply and fixing of storage type water heater (Geyser) electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of Gyeser and 'GE North BTD' shall also be writing on Gyeser with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Gyeser installed at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.
3
-
-
Labour for fixing of 4 Nos rawl plug of suitable size (4"-6") nuts & bolts, grouting work in RCC/Brick wall, cemented works labour charges for cutting to exisiting GI pipe line of size 15 mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittngs, plumbing work all as per site requirement.
3
-
-
Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (Geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.
3
-
-
M & L for replacement of tubing GI "MG" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 15 mm dia complete all as specified and directed
50
-
-
S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia of pipe.
3
-
-
S&F PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series braded, threaded and cold series) complete all as directed by Engr-in-Charge.
3
-
-
S&F Bib tape cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe for brass ferrule of size 15 mm bore.
3
-
-
Labour for cutting to existing GI pipe of size 25/20 mm dia in position for addition/alteration or insertion of TEE for branch connection complete with cutting, threading and jointing/fixing including GI fitting as per site requirement
3
-
-
S&L and testing cable XLPE Insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 V grade cross sectional area 70 Sqmm, 3.5 core in and incl taking out old one all as specified and directed.
110
-
-
M&LSand filling in cushing bed of cable and consolidation complete as specified
6.5
-
-
Supply and laying comman burnt clay building sub class `B' bricks, laid over sand Cushioning laid at right angle along with cable, all as specified and as directed.
696
-
-
S&L GI tubing light graded incl all accessories for encasing cables for mechanical protection, laid under plinth/floors/path culverts with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed of sizes (MS work will be measured under separate item in schedule) 40 mm
10
-
-
Supply and fixing wall mounted Retro LED 20 watt, Batten decorative type, appx 4 feet long, pre wired including LED tube light 20W, 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type, complete all as specified and as directed by Engineer-in-Charge.
39
-
-
Supply and fixing Led slim panel with wide light window for maximized glare free output suitable for 300x1200 mm modular including hanging arrangement with suitable chain complete fitting with separate electronic driver and high brightness LEDs 36 W (100 lumens per watt), not less than 5700K including connecting electric connection, including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge.
36
-
-
Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in & including PVC conduit size 20mm including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge.
90
-
-
Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (AC Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.
6
-
-
Supply and fixing of BLDC (Brushless direct current motor) ceiling fan 5 star rated, complete with blades, down rods, and accessories, 230 Volts, 1400mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, including electrical connection providing twin core round copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge.
Note :- (i) Srl Number of ceiling fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Ceiling fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account
30
-
-
Supply and fixing of exhaust fan steel body 380 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account
9
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%