Military Engineer Services Tender

Lumpsum Price worked out by Contractor for SITE CLEARANCE & EARTH WORKS as listed in Schedule 'A' Part-II brought forward from serial page No 20

Lumpsum Price worked out by Contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-III brought forward from serial page No 21

Lumpsum Price worked out by Contractor for LIGHTENING AND AVIATION PROTECTION as listed in Schedule 'A' Part-IV brought forward from serial page No 22

Lumpsum Price worked out by Contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-V brought forward from serial page No 24

Lumpsum Price worked out by Contractor for ROAD,PATH AND CULVERT WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No 26

Lumpsum Price worked out by Contractor for COMPOUND WALL,FENCING AND GATES WORKS as listed in Schedule 'A' Part-VII brought forward from serial page No 29

SCHEDULE ‘A’ PART-VIII (MISC ITEMS OF WORKS) INTERNAL ELECTRIFICATION WORKS Supply and fix flame proof weather proof exhaust fan single phase CMRI certified recommended for gas/vapor group of IIA & IIIB,Zone 1&2 of size (15"),SP , 0.25 HP,1440 RPM,230 volts single phase AC supply,with louvers,complete with bolts,nuts and washers suitably embeded in wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan giving connection complete all as specified and as directed by Engineer-in-Charge.

Supply and fix flame proof weather proof distribution panel certified recommended for gas/vapor group of IIA & IIIB,Zone 1&2 suitable 4 way SPN 240 volt complete all as specified and as directed by Engineer-in-Charge.

Supply and fix flame proof 20 Watt bulk head fitting suitable for 1x20 Watt LED with suitable driver certified recommended for gas/vapor group of IIA & IIIB,Zone 1 &2 complete all as specified and as directed by Engineer-in-Charge.

LIGHTENING AND AVIATION PROTECTION Supply and fix epoxy insulator with red colour including nut and bolt suitable for fixing size of strip 25x 3.15 mm complete all as specified and as directed by Engineer-in-Charge.

EXTERNAL ELECTRIFICATION WORKS Supply installng, testing and commissioning floor mounted LT panel out door type of suitable size 1.2 x 1.2 x 0.45 Mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3.00 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coacted heaving insulated bus bar TPN having Aluminium bus bar strip of capacity 400 Amps fixed on epoxy insulator (4 Nos) with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate) Powder Coated from outside and inside complete as under with & incl following accesseries: (a) Incoming MCCB 100 A, 4 pole, 25 KA, 415 V, 3 ph, 50Hz -01 No (b) outgoing MCCB 63 A, 4 pole, 16 KA, 415V, 3 phase, 50Hz -03 No (c ) outgoing MCB 32 A,4 pole, 10 KA, 415 V, 1 phase, 50Hz - 02No (d) Multifunction digital meter to measure voltage (0-500V),Current (0-400A), KWH, PF,Amp etc. (e ) Set of phase indicator lamp R,Y,B - 01 Set

Supply and fixing security light bracket made of 40mm dia GI light grade pipe 1.5 metre long bend to shape including fixing on pole with suitable size of flat iron clamps, nut, bolt etc. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing cable junction box IP 66 of thermoplastic polycarbonate outdoor type size 155 x 210 x 92 mm , duly fixed arrengement for entry and exit of cable entry complete all as specified and as directed by Engineer-in-Charge.

ROAD,PATH AND CULVERT WORKS Material and labour for Providing and marking broken/continuous central/end line on the road pavement and the like of description by using hot applied thermoplastic compound 2.50mm thick (excluding thickness of glass beads) and providing reflective glass beads @ 250 gm per square metre as per IRC-135,confirming to MOSRT&H, complete all as specified and as directed by Engineer-in-Charge.