Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 92,700Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_654475_1Bid Award Id
ViewTender No
GE FRD-26/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Dismantling Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed.
120
-
-
S&F 12mm thick PVC laminated gypsum board as in ceiling fixed with screws as per manufacturer's instructions, including anodised aluminium snap grid frame work for false ceiling of grid 605x605mm, hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling
316
-
-
Dismantling of timber scantlings 40 Sqcm and over in section, uframed work,in any position complete all as specified and directed
0.5
-
-
M&L for 2nd class hard wood in scantling ,clean swan,timber framed and fixed complete all as specified and directed.
0.5
-
-
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
25
-
-
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
19
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/
Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same .
67.8
-
-
M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed.
0.5
-
-
S&F 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces .The size of rail and stiles as per IS: 1003(Part-1),kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.
20.38
-
-
S&F factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars ,any numbers sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed .
20.38
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames / Chowkhat of size 45 x 85 mm comprising of virgin polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same .
9.5
-
-
S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.
2.54
-
-
S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.2 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges, medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed .
30
-
-
S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.2mm thick, cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one no locking arrangement as per Godrej pattern, two nos handle and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion) (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.
7.2
-
-
Dismantling boarding,any description,fixed in any position with nails complete all as specified & directed.
5
-
-
M&L for 25mm prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
5
-
-
M&L for 2nd class soft wood plain fillets ,exc 3 Sqcm and not exc 6 Sqcm sectional area,square, rectangular or triangular in section, clean swan, secured with nails or brads ,put together with glue pinned at joints complete all as specified and directed.
10.8
-
-
M&L for Ist class soft wood moulding as in cornices,picture rails and the like , not exc 6 Sqcm complete all as specified and directed.
9
-
-
S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed.
51
-
-
S&F magnetic catcher of size 100mm fixed with screws complete all as specified and directed.
18
-
-
S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.
4
-
-
S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.
44
-
-
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
56
-
-
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
11
-
-
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
11
-
-
S&F 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .
25
-
-
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete with glazing bars dovetailed or welded complete all as specified & directed.
18
-
-
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete without glazing bars dovetailed or welded complete all as specified & directed.
18
-
-
S&F door seal (Brush type) of width not less than 38mm and length exc 800mm but n.exc 1000m,fixed with screws complete all as specified and directed .
15
-
-
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .
34.96
-
-
M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
42.2
-
-
S&F 4mm thick, figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed
0.5
-
-
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .
10
-
-
S&F Mild Steel framed work such as grills, gratings etc. with ends of bars shoulderd and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand,ladder and similar work conforming to Fe290, Gde-E-165 complete all as specified and directed.
500
-
-
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed.
90
-
-
M&L for Mild steel plain black sheet 1.25 mm thick in covering to door shutters, steel gates and similar work, cut to size,edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc.as required complete all as specified and directed .
2
-
-
M&L for preparation of new or previously untreated steel surface of any description not exceeding 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
6.5
-
-
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
42.79
-
-
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed .
19.65
-
-
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .
100
-
-
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. .
4
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
1074.4
-
-
S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed .
604.4
-
-
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed .
22.8
-
-
M&L for 18 to 20mm thick Granite (of approved type and colour) work (table rubbed and polished) as in cooking platforms, stair case landing or steps and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite including cutting and moulding the edges half round on exposed side complete all as specified and directed.
10
-
-
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
11
-
-
S&F Machine cut kota stone slab in flooring ,20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
223
-
-
M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path finishing surfaces even and fair complete all as specified and directed .
112
-
-
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in floors (other than ground floors), beams, staircases, landing, chajjas,shelves and similar suspended work complete all as specified and directed .
2
-
-
M&L for RCC 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves complete all as specified and directed.
2
-
-
M&L for TMT bars 6 to 10mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
80
-
-
M&L for use and waste of form work to soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping complete all as specified and directed .
12
-
-
Taking up or down 15mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
100
-
-
Taking up or down 20mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed.
70
-
-
M&L for Steel water tubing of 15 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
90
-
-
M&L for Steel water tubing of 20 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
63
-
-
All as per item No 58 here-in-before but except tubes.
10
-
-
All as per item No 58 here-in-before but except tubes.
7
-
-
M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exc 20cm girth complete all as specified and directed.
90
-
-
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position including all necessary fittings complete all as specified and directed.
2
-
-
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .
2
-
-
S&F in repair 15mm bore bib taps long body, cast copper alloy, chromium plated with on/off handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.
10
-
-
S&F in repair pillar taps,fancy type,chromium plated ,cast copper alloy, with on/off handle, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed
2
-
-
S&F brass CP basin mixer,15mm bore, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .
1
-
-
S&F in repair brass CP wall mixer,15mm bore, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .
1
-
-
S&F in repair Stop valve/angle ball, cast copper alloy,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed.
6
-
-
S&F in repair 15mm dia stop cock ,cast copper alloy, chromium plated, concealed type with long shank and cup with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .
6
-
-
S&F PVC connection, 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
6
-
-
S&F plate rack made of 1.00 mm thick stainless steel of size 900mm x 600mm x 250mm including angle iron brackets complete all as specified and directed .
2
-
-
S&F sinks with drainage board, made of 1mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 330mm x 160mm, plugs, washers, waste pipe, union, waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed
2
-
-
S&F in repair vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including CI brackets,Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore complete all as specified and directed.
1
-
-
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
1
-
-
S&F Cast iron 'P' or 'S' trap, bore of pipe 100 including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B1 complete all as specified and directed .
1
-
-
S&F 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
1
-
-
S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.
1
-
-
S&F 600mmx450mm looking mirror of selected glass 5mm thick mounted on 6mm thick commercial ply wood with PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed .
1
-
-
S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
1
-
-
S&F PTMT soap tray, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
1
-
-
S&F in repair MS powder coated decorative drapery rod (colour as approved) 25mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.
47.5
-
-
Taking down eaves gutters and rain water pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
10
-
-
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
10
-
-
S&F PVC (SWR) bends any radius ,110mm bore complete all as specified and directed.
2
-
-
Dismantling CI/PVC pipe of 75mm dia alongwith fittings ,below or above GL/laid in floors/fixed to walls jointed in cement mortar complete all as specified and directed.
5
-
-
S&F 75mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed .
5
-
-
S&F in repair CI bends, diminishing pieces or tapers, bore of pipe 75 mm complete all as specified and directed .
1
-
-
S&F in repairs Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .
1
-
-
S&F 75mm bore, cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access door complete all as specified and directed .
1
-
-
M&L for salt glazed stoneware gully traps of size 150x150mm,square of round mouthed, type 'P' complete all as specified and directed .
2
-
-
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
684.6
-
-
M&L for rendering 15 mm thick in cement mortar 1:6 brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
553.6
-
-
M&L for rendering 15 mm thick in cement mortar 1:4 mixed with WPC on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed . Note:- WPC shall be measured and paid separately as "supply only".
61
-
-
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
70
-
-
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
140
-
-
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .
310
-
-
M&L for preparation of newly plastered or unplastered wall surfaces and applying three coats of white wash complete all as specified and directed .
243.6
-
-
M&L for preparation of old decorated surfaces of wall, soffits / facia of chajja/ roof slab by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of white wash complete all as specified and directed.
110
-
-
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.
61
-
-
M&L for preparation of old decorated surfaces of wall, soffits / facia of chajja/ roof slab by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of cement base paint complete all as specified and directed.
330
-
-
M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.
62
-
-
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed .
93
-
-
M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed
4.65
-
-
M&L for Machine pressed Precast cement concrete interlocking coloured ( glossy finished / ruberised paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed .
93
-
-
Dismantling Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
7.55
-
-
M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .
6.05
-
-
All as per Srl item No. 107 here-in-before but except bricks complete all as specified and directed .
1.5
-
-
M&L for plain cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.
2
-
-
0.63 mm thick Plain, galvanised, mild steel sheeting with grade of zinc coating 275, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified & directed
34.92
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .
18.48
-
-
S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250, quality-A) complete all as specified and directed
1790
-
-
S&F rolled mild steel in plates (plain or chequered) channels,square cut or notched (ordinary or counter sunk) forming holes ,without any attachment conforming to Fe-290 Gde E-165 quality , complete all as specified and directed
58
-
-
M&L for Vitrified ceramic tiles, light shade, 8 to 9 mm thick (square/ rectangular), polished,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
268
-
-
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed
0.5
-
-
M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. .
0.5
-
-
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.
25
-
-
S&F anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium (minium thickness of powder coating 50 micron) as per the specification. The top & bottom horizontal members and vertical members adjacent to walls shall be fixed with floor, ceiling, walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners complete all as specified and directed
124.2
-
-
S&F anodised Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,anodised aluminium fitting such as peg stays 150mm long (01 no), hinges type B-21, 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.
38.26
-
-
S&F brass mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed.
5
-
-
S&F door closer hydraulically regulated, Aluminium (extruded section body), designation No 3, universal type suitable for door shutter 851mm to 1000mm width and weight between 61 to 80 kg complete all as specified and directed.
4
-
-
S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet having beading/border on top and on joints inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed by Engineer-in-Charge Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall
197.35
-
-
S&F 5mm thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed .
394.7
-
-
Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed.
Note : Rate for making good shall be deemed to be included in above item rate.
174
-
-
Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc in the existing concealed conduit with new provision of 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .
126
-
-
All as per Ser item No 125 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .
17
-
-
All as per Ser item No 125 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .
17
-
-
All as per Srl item No. 125 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed .
14
-
-
S&F PVC Lamp holder with back plate suitable for batten fittings complete all as specified and directed .
16
-
-
S&F LED bulb 1 x 10 watt Lamp having luminous efficiency warranty 2 years complete all as specified and directed .
16
-
-
S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
40
-
-
S&F complete set of tube light fitting, 1x10 watt LED (2 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
2
-
-
S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .
58
-
-
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 10 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 10 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed Note :- Two runs of 10 Sqmm copper cable and one run of 10 sqmm copper wire earth continuty conductor shall be measured as one length)
30
-
-
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 6 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor shall be measured as one length)
50
-
-
Excavation in trenches in soft/loose soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes,piers,shafts etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed.
20.03
-
-
Returning, filling in,including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed .
13.14
-
-
Removal of surplus soil to a distance not exceeding. 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .
6.89
-
-
S&F switch piano, flush type, single pole, one way, 5 /6 Amp,230 V,AC supply complete all as specified and directed .
160
-
-
S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.
14
-
-
S&F socket outlet, two in one, 5 Pin 5 Amps, 230 Volt, AC supply, complete all as specified and directed.
34
-
-
S&F socket outlet ,2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.
8
-
-
S&F in repair factory made epoxy polyester powder coated distribution board TP&N ,4 ways (VTPN DB), double door,(concealed flush to wall) (IP-42 protection) fabricated from minimum 1.2 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 250 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with space for provision for 4 pole MCCB as incommer and outgoing MCBs as required at site and conforming to IS: 8623 along with cable end box including making good disturbed surface complete all as specified and directed. NOTE: (a) MCCBs and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of BoQ.
2
-
-
S&F Sheet metal enclosure for DBs,SPN, double door, 230 Volts,8 ways with 200 amps rated bus bar complete all as specified and directed .
4
-
-
S&F MCCB 4 Pole,adjustable type ,415 V, 100 Amps with breaking capacity 16 KA complete all as specified and directed.
2
-
-
S&F MCB SP 5 to 32 Amp, 230 volts, B Curve with breaking capacity 10 KA complete all as specified and directed .
42
-
-
S&F MCB SP 40 Amp, 230 volts, B Curve with breaking capacity 10 KA complete all as specified and directed .
3
-
-
S&F MCB, SPN, 32 amps, 230V, B Series with breaking capacity 10 KA complete all as specified and directed .
4
-
-
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to electrical equipment/GOD/LA and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of precast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Schedule Part-I (2009), complete all as specified and directed. Note(s):- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with TMT bar 8mm dia both ways @100c/c.
(ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) Quoted lump sum / rate shall be inclusive of above all provisions.
2
-
-
M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
6.89
-
-
Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
480
-
-
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 25 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, including taking out existing one complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
100
-
-
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, including taking out existing one complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
50
-
-
S&F in repair energy efficient LED Security light fitting of 25W, pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/ roadway luminaire, with driver including electric connection, complete fitting with all accessories on and including bracket of 40mm dia,light grade ,GI pipe ,1.20 m and connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm and with following specifications complete all as specified and directed :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max15%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire.
(j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12Hrs
8
-
-
M&L in repair for Steel water tubing of 25 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
70
-
-
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 25 mm dia of pipe complete all as specified and directed.
6
-
-
S&F in repair GI pipe, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed.
Note : (i) Excavation and earth work shall be measured and paid separately.
20
-
-
S&F in repair 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.
8
-
-
Supply & fixing Energy efficient Ceiling fan complete with blades, down rods, electronic type regulator & accessories, 230 V,1200mm sweep, minimum air delivery 245 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) including writing of MES number (Black, Roman, Italic or Indian) n. exc 30cm height complete all as specified and directed .
16
-
-
Supplying and fixing and commissioning of electric water heater (Gyser) storage type ABS body of capacity 25 ltrs, BEE appreoved 5 star rating, 230V,single Phase, AC supply inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined quoting complete with all accessories such as safety valve thermostate NRV, connection piece PVC connection for hot and cold water 3 core PVC insulated PVC sheated copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 Nos nut bolt grouting in wall in PCC(1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed.
3
-
-
Supply and fixing wall mounted fan, single phase, 230 volts, AC supply, 400mm sweep, RPM 2200, air delievery 100 CMM, copper winding,tilting arrangement ,50 cycles per second, all fixing arrangements material etc and including three core copper flexible wire 1.00 mm dia drawn into and including PVC flexible conduit and hanging on wall with steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed complete all specified and directed.
8
-
-
S&F exhaust fan ,steel body, AC single phase, 4 blades with self closing GI louver shutter suitable for operation on 220/230 volts of 300mm sweep and including three core copper flexible wire 1.00 mm dia drawn into and including PVC flexible conduit and hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed .
8
-
-
Supply and fixing LED luminaire 600 mm x 600mm, 35/36 watt, 220 V,AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed with following specification :-
(a) Lumen efficiency of luminaire should be more than 100 Lumen per watt.
(b) Voltage operating range : 140 to 270 volts.
(c) Temp operating range : Minus 10º C to Plus 50º C.
(d) Power factor : Minimum 0.95. (e) THD : Max 10%.
(f) IP rating : IP20.(g) CRCA pre coated housing. (h) LED driver of the make as of the luminaire,(j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer.
(k) Inbuilt Surge protection device for 4 KV.
20
-
-
S&F sub main wiring with two runs of single core PVC, FRLS sheathed, insulated, copper cable of 4Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 4Sqmm for continous earth wire drawn into and including concealed conduit of suitable size not less than 20mm dia complete all as specified and directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor , conduit with accessories shall be measured as one length)
60
-
-
S&F Socket Residual Current Device (SRCD) with steel enclosure including MCB,SPN 20 Amps,240 V, AC supply & plug top complete all as specified and directed.
6
-
-
S&F in repair PVC non metallic rigid conduit, 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive of all tees, bends, reducer, bell mouth tube ends and fixing accessories, concealed including cutting chases in wall, floor and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed. Note :- A Sum of Rs. 77,013.30 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 31 & 32 (Schedule of credit) of Tender Documents.
250
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements