Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 93,230Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_687487_1Bid Award Id
ViewTender No
GE/ASR-77/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply and Fixing Linear ceiling system cosists of 84mm x 16mm panels without flush profile (for 100mm modules only) rolled out of metal coils. Panels are fixed on to roll-formed carriers 32mm wide by 39mm deep made out of 0.9 or 0.7 mm aluminium or 0.70mm galvanised steel sheet with cutouts to hold the panels in modules of 100mm at a maximum 1.7m c/c without insulation and at a maximum 1.5m c/c with insulation. Carriers are suspended from the roof or truss by a 4mm diameter galvanised steel wire rod hanger with a special height adjustment suspension clip at maximum. 1.3 c/c hanger are fixed to the roof by ceiling brackets. Panel are available in lenghs up to a maximum of 6m to suit site dimensions. Edge profiles, or wall angles are 24mmX24MMx0.35mm thick and match the color of the panel. A flush profile can be used in between two panels to fill a 16-mm gap. Panels are made of galvanised steel with 120 gsm zinc coating and 20 micron polyester paint coil coating sheets. Panels are may in 60 micron polyester powder coated galvanised steel with 120 gsm zink cozting or in aluminium alloy in different colours. The thickness is 0.5 mm for panels and 0.9/0.7mm for carrier.Panels may be in plain and perforated sizes of 2.5mm and 1.8mm complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
80
-
-
... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
15
-
-
... More
Material and Labour Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
150
-
-
... More
ASR/Rev/06/2024-25
Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
6
-
-
... More
Material and Labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
0.6
-
-
... More
Material and Labour RCC M-20 (Normal Mix) 1;1/2;3 using 20 mm graded stone aggregates as in column footings, plinth beams complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1
-
-
... More
Material and Labour RCC M-20 (Normal Mix) 1;1/2;3 using 20 mm graded stone aggregates as in columns complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1.2
-
-
... More
Material and Labour RCC M-20 (Normal Mix) 1;1/2;3 using 20 mm graded stone aggregates as in beams complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
0.8
-
-
... More
Material and Labour M-20 (Normal Mix) 1;1/2;3 using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
2
-
-
... More
Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
400
-
-
... More
Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
60
-
-
... More
Formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
20
-
-
... More
Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
20
-
-
... More
Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
20
-
-
... More
Fair finished flat Form work to chajjas and similar items including edges complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
16
-
-
... More
Fair finished flat form works to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
20
-
-
... More
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ccomplete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
4
-
-
... More
Material and Labour Brick work built CM 1:6 subclass B brick strength curved or plan exc 6m mean radius complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
8
-
-
... More
Material and Labour Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
60
-
-
... More
Material and Labour for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
80
-
-
... More
Material and Labour for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
12
-
-
... More
Material and Labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement) complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
24
-
-
... More
Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer all complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
48
-
-
... More
Material and Labour for preparation of newly plstered wall surface and applying two coats of cement Base complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
50
-
-
... More
Material and Labour for applying two coats of white wash ceiling surface complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
26
-
-
... More
Filling in floors using surplus excavated soil Spreading and levelling in layers n exc. 25 cm thick and rammed including watering complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
3
-
-
... More
Material and Labour for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
5
-
-
... More
Material and Labour for 100 mm thick, PCC 1:3:6, Type C-2, using 40mm graded aggregate as in Sub base for flooring complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
80
-
-
... More
Material and Labour Cement concrete 50 mm thick type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protection etc finished even and smooth without using extra cement complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
30
-
-
... More
Material and Labour for ATT, Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
26
-
-
... More
Supply and Fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
45
-
-
... More
Supply and Fixing 110 mm bore PVC (SWR) bends of any radius complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
6
-
-
... More
Supply and Fixing 15mm bore water tubing medium grade galavanised with all fittings and is fixed complete to walls and ceiling or laid in floors complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
5
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
60
-
-
... More
Material and Labour joint free Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm to 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 ccomplete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
28
-
-
... More
Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
32
-
-
... More
Material and labour PCC 1:2:4 type B-0(using 12.5 mm graded crushed stone aggregate) as in roof kerbs, sloping padding and finishing the surface even and smooth (without using extra cement) complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1.2
-
-
... More
Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm includingcleaning surfaces etc complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
35
-
-
... More
Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with overlapping 100mm to eiher side complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
35
-
-
... More
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ccomplete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
4
-
-
... More
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
6
-
-
... More
Supply and Fixing Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gaused Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :-
i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) pintol hinges 12 x 75 mm - 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c.
(viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) (x) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in glazed / gazed skelton shutter of window
(xi) 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane fixed in glaxed / gazed skelton shutter of window.
(xii) Fabrication and fixing arrangements as per Drg No CE JZ/TD-06-07 including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
3.24
-
-
... More
Supply and Fixing mild steel box type ventilator fixed type with glazing bar with mesh & glass as per primer coated complete all as spd.
1
-
-
... More
Supplying and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1.6
-
-
... More
Supplying and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1.6
-
-
... More
Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1
-
-
... More
Supply and fixing PVC connection 450mm long of 15mm size with PTMT nuts on both sides complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
4
-
-
... More
Supply and Fixing bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
6
-
-
... More
Supply and Fixing stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
8
-
-
... More
Supply and Fixing in repair angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
8
-
-
... More
Supply and fixing sink made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste incl fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-Charge .
2
-
-
... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1
-
-
... More
Material and Labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
10
-
-
... More
Supply and fixing solid PVC board 18mm thick plain colour as in cup board shelves, kitchen cabinet etc. , ccomplete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
10
-
-
... More
Supply and fixing solid PVC shutter one side prelam of any shade 18mm thick plain colour as in cup board/ kitchen cabinet shutter etc. , complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
10
-
-
... More
Supply and fixing solid PVC sheet 5mm thick plain colour as in cup board, kitchen cabinet etc. complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
12
-
-
... More
supplying and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm,complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
Note :- Net area of front finished surface will be measured.
10
-
-
... More
Supply and Fixing 40mm long self closing type Hydraulic steel hinges (Box type) in suitable for kitchen cabinets & Cupboards complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
50
-
-
... More
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ccomplete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
3
-
-
... More
All as per Srl item No 58 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
2
-
-
... More
Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
120
-
-
... More
Supply and Fixing IInd class hard wood Glazed and skeleton shutters 30 mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
3.61
-
-
... More
Supply and Fixing for 35mm thick 2nd class hard wood panelled shutters (two panels) Factory Made with lock rail & panel of 9mm BWP commercial ply or 12mm thick vineered particle board with commercial vineering on both faces, the size of rail & styles as per IS: 1003 (Part-I) klin seasoned & chemically pressure treated (factory made shutters) complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
3.6
-
-
... More
Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
0.5
-
-
... More
Supply and Fixing 250 mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
2
-
-
... More
Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
8
-
-
... More
Supply and Fixing 150mm long Aluminium handles, cast type anodised.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
4
-
-
... More
Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
12
-
-
... More
Supply and Fixing in Double sinks of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
2
-
-
... More
Supply and Fixing in repair PVC waste pipe 32/38/40 mm dia, 600 to 750 mm long complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
4
-
-
... More
Supply and Fixing in repair 20 mm Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms) complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1
-
-
... More
Supply and Fixing M.S. 300mm ordinary rat tail rod pattern spring including roller and roller plate complete including necessary welding to door frame complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
2
-
-
... More
Returning filling in the soil including spreading, levelling, watering and well ramming in layer n.exc 25cm thick each layer complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
1
-
-
... More
Removing excavated soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
5
-
-
... More
Supply and Fixing Floor door stopper aluminium ally body and tongue anodised with hand drawn steel spring to door shutter of size 140 mm etc.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
2
-
-
... More
Material and Labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface. complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
10
-
-
... More
Material and Labour Cement concrete type C-2, 1:3:6 using 40mm graded agregate as in foundations, filling and mass concrete complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
2
-
-
... More
Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
390
-
-
... More
Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
50
-
-
... More
Material and Labour for preparation of untreated steel/iron surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coats of sythetic enamel paint over and incl one coat of red oxide primer.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
10
-
-
... More
Material and Labour for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
8
-
-
... More
Material and Labour for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
10
-
-
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
767
-
-
... More
Material and Labour for point wiring one light point controlled by one way switch complete with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0 mm thick of suitable modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.
290
-
-
... More
All as per ser item No. 87 above but for point wiring of one light point controlled by two 2-way switch
15
-
-
... More
All as per ser item No. 87 above but for point wiring of one fan point controlled by one switch/regulator
52
-
-
... More
All as per ser item No. 87 above but for point wiring of one bell point controlled by one bell push button
40
-
-
... More
All as per ser item No. 87 above but for point wiring of one 5 Amps outlet point on same board with other switches/ sockets
40
-
-
... More
All as per ser item No. 87 above but for point wiring of one 3 pin 5 Amps socket outlet on independent board.
220
-
-
... More
All as per ser item No. 87 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
100
-
-
... More
Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
612
-
-
... More
Supply and fixing modular switch 1 way 16A, 240 volts, 1 module complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
100
-
-
... More
Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge
270
-
-
... More
Supply and fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge
100
-
-
... More
Supply and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified and directed by Engineer-in-Charge
162
-
-
... More
Supply and fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm sweep all as directed
30
-
-
... More
Supply and fixing Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings including 10cm x 10cm presto plastic board for resting to holder including Supply and fixing 01 x LED lamp, 230 volts as directed complete all as specified and directed by Engineer-in-Charge
20
-
-
... More
Supply and fixing PLUTUS outdoor wall light fittings, 1 x 3 Watt, WH, AC 240 Volt, decorative type with aluminium die cast, dark grey colour with IP-65 protection complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
Make: Cat No. LODUPGU10 of Luker or equivalent make of Crompton/Havells
25
-
-
... More
Supply and fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light of make: Havells or equivalent in Philips/Crompton, connecting up with 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
80
-
-
... More
Supply and fixing Wall mounted, indoor, Mirror Light LED with aluminium die cast, suitable for and including 10 watt 6000K, WH LED light, prewired incl connecting up complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
20
-
-
... More
Supply and fixing COMET ROUND Slim surface mounted round shape 15 watt 220 volts AC, 6000K recessed type LED luminaire, with IP-20 protection with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
70
-
-
... More
Supply and fixing PLUTO NEO LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type of make: Havells or equivalent make of Philips/Crompton, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases (1.0 mm² size/core) complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
65
-
-
... More
Supply and fixing Dusk & dawn roadway luminaries 90 Watt, 230 V AC, 5700K outdoor type with epoxy black powder coated sheet of make: Havells or equivalent make of Philips/Crompton, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics, PF95%, THD10%, Lumen4500 lm with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge .
10
-
-
... More
Taking down carefully existing serviceable Ceiling fan, ceiling cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose to fan complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
30
-
-
... More
Supply and fixing ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator, accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, fan hook, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology of make: Havells or equivalent of Orient/Crompton and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
8
-
-
... More
Supply and fixing exhaust fan, heavy duty, steel body AC single Phase, 230V of size 300mm sweep, with blades and frame and louvers of make: Havells or equivalent Crompton/Orient complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
8
-
-
... More
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm of make: Havells or equivalent in Orient/Crompton complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
6
-
-
... More
Taking down carefully existing serviceable Split type AC of any capacity, ceiling cable end, etc., removing the AC for keeping in safe custody and refixing the same as directed by Engr-in-Charge after rewiring with provn of new suitable MS bolts, suitable size copper tube (no brazing will be entertained) grouted to wall, refilling of R-134a refrigerant and connecting up and making good to the disturbed surface in cement morter 1:3 or cement concrete 1:2:4, Type B-1 as required and testing complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge NOTE: Cost MS bolts, nuts & washers, refilling of refrigerant, copper tube as per site requirement etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of AC will be deemed to be included in the quoted rate
12
-
-
... More
Taking down carefully existing serviceable Geysers of capacity 25 ltrs, ceiling cable end, etc., removing the geyser for keeping in safe custody and refixing geyser with provn of new suitable MS bolts, PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers brass union, NRV, grouted to wall and connecting up including provn of new 3 core sheathed multi-stranded flexible copper conductor cable, writing MES No. including making good to the disturbed surface including cleaning of element, flanges, tank etc. and testing complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
4
-
-
... More
Supply and fixing sub main wiring with 2 runs of 4.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 4.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge (For AC pts.)
NOTE: Two runs of 4.0 sqmm copper cable and one run of 4.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
550
-
-
... More
All as per ser item No. 25 above but for sub main wiring with 2 run of 6.0 sqmm & 1 run of 6.0 sqmm as earth wire
NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
350
-
-
... More
All as per ser item No. 25 above but for sub main wiring with 4 runs of 10.0 sqmm & 2 runs of 10.0 sqmm as earth wire
NOTE: Four runs of 10.0 sqmm copper cable and two runs of 10.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
175
-
-
... More
All as per ser item No. 25 above but for sub main wiring with 4 runs of 16.0 sqmm & 2 runs of 16.0 sqmm as earth wire
NOTE: Four runs of 16.0 sqmm copper cable and two runs of 16.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
150
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge NOTE FOR SER NO. 25 TO 33: (i) MCB DB & MCBs should be of same make as mentioned above.
(ii) Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.
4
-
-
... More
All as per ser item No. 19 above but for MCB DB SPN 12 way, 240 volts grade
40
-
-
... More
Supply and fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
410
-
-
... More
All as per ser item No. 19 above but for MCB SPN 32 Amps
40
-
-
... More
All as per ser item No. 19 above but for MCB TP 63 Amps
4
-
-
... More
All as per ser item No. 19 above but for MCB TPN 63 Amps
4
-
-
... More
Material and Labour for loadline distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, complete incl taking down old unsv one from site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
4
-
-
... More
Supply and fixing MCCB triple pole and neutral (four pole) 160 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections complete incl taking down old unsv one from site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
2
-
-
... More
Supply and fixing MCCB triple pole and neutral (four pole) 100 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections complete incl taking down old unsv one from site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
2
-
-
... More
Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.
5
-
-
... More
Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge.
60
-
-
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
25
-
-
... More
Material and Labour for point wiring complete with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0 mm thick of suitable modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.(a) One light point controlled by one switch
23
-
-
... More
(b) One Fan point controlled by one switch & regulator
2
-
-
... More
(c) One 5 Amps outlet point on same board with other switches/sockets
2
-
-
... More
(d) One 3 pin 5 Amps socket outlet on independent board.
6
-
-
... More
All as per ser item No. 2 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
5
-
-
... More
Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
33
-
-
... More
Supply and fixing modular switch 1 way 16A, 240 volts, 1 module complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
5
-
-
... More
Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge
8
-
-
... More
Supply and fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge
5
-
-
... More
Supply and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified and directed by Engineer-in-Charge
21
-
-
... More
Supply and fixing Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings including 10cm x 10cm presto plastic board for resting to holder including Supply and fixing 01 x 10/12 watts LED lamp, 230 volts complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
4
-
-
... More
Supply and fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light of make: Havells or equivalent in Philips/Crompton, connecting up with 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
15
-
-
... More
Supply and fixing Dusk & dawn roadway luminaries 35 Watt, 230 V AC, 5700K outdoor type with epoxy black powder coated sheet of make: Havells or equivalent make of Philips/Crompton, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics, PF95%, THD10%, Lumen4500 lm with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge .
4
-
-
... More
Supply and fixing exhaust fan, heavy duty, steel body AC single Phase, 230V of size 300mm sweep, with blades and frame and louvers of make: Havells or equivalent Crompton/Orient complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
2
-
-
... More
Supply and fixing of CPVC pipes of outer dia 20mm, SDR 11 & Plain CPVC SDR 11 fittings (such as elbow, socket, union, male/female threaded socket, etc.) conforming to IS: 15778, having pressure bearing capacity @ 23°C is 28.12kg/cm² & at @ 82°C 7.03kg/cm² complete fixed on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge .
20
-
-
... More
Supply and fixing stop valves of bore dia 20mm, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/CPCV pipe or for unions and fixed complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
2
-
-
... More
Supply and fixing Bib taps, of bore dia 20mm, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge an directed
4
-
-
... More
Supply and fixing storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, with incoloy heating element and PUF insulation, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of new suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers brass union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections including writing MES No. and making good to the disturbed surface in cement morter as required and testing complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate
1
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge NOTE: (i) MCB DB & MCBs should be of same make as mentioned above.
(ii) Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.
2
-
-
... More
Supply and fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
22
-
-
... More
All as per ser item No. 19 above but for MCB SPN 32 Amps
2
-
-
... More
Supply and fixing sub main wiring with 2 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
65
-
-
... More
All as per ser item No. 25 above but for sub main wiring with 2 run of 2.5 sqmm & 1 run of 2.5 sqmm as earth wire
NOTE: Two runs of 2.5 sqmm copper cable and one run of 2.5 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
35
-
-
... More
Material and Labour for loadline distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, complete incl taking down old unsv one from site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
1
-
-
... More
Supply and fixing MCCB triple pole and neutral (four pole) 100 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete incl taking down old unsv one from site complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge by Engineer-in-Charge
1
-
-
... More
Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge .
NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.
2
-
-
... More
Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete complete all as specified and directed by Engineer-in-Charge and directed by Engineer-in-Charge by Engineer-in-Charge
30
-
-
31
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements