Military Engineer Services Tender

Scarifying or picking existing damaged water bound macadam in patches, area not exceeding 400 Sqm, depth exceeding 50mm & not exceeding 100mm including removal of aggregate and spoil out off the premises complete all as specified and directed.

Scarifying or picking existing damaged water bound macadam in patches, area not exceeding 400 Sqm, depth not exceeding 50mm deep including removal of aggregate and spoil out off the premises complete all as specified and directed.

M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread,rolled and consolidated with power roller exc 8 tonne and not exceeding 12 tonne to a required gradient and camber complete all as specified and directed.

M&L for Preparing Unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. & applying evenly a priming/tack coat with bituminous primer at 10 kg /10 sqm (Bitumen VG-10 grade) complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen ( VG -30) @ 4% by weight of total Mix complete all as specified and directed.

M&L for preparation of new bituminious surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG 10 grade @ 5 Kg per 10 Sqm of road surface and laying bituminous premixed semi dense asphaltic concrete 40mm thick (consolidated thickness) using binder (Bitumen VG-30 grade) contents @ 5.5 % by weight of total mix, mixed in Hot mix Plant and laid by using self propelled mechanical paver, rolled and compacted to required camber & gradient using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface etc, complete all as specified and directed.

M&L for Preparation of existing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG 10 grade @ 5 Kg per 10Sqm of road surface and laying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) using binder (Bitumen VG-30 grade) contents @ 5.5% by weight of total mix, mixed in Hot mix Plant and laid by using self propelled mechanical paver, rolled and compacted to required camber & gradient using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface etc, complete all as specified and directed. Notes for item Nos. 08 to 10:- (i) The actual binder content for BM and SDAC used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in BOQ. (ii) Price adjustment shall be done on MINUS side only @ Rs. 46900/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in BOQ. (iii) No Price adjustment for Bitumen shall be done for variation on plus side.

M&L for Continuous brick edging with width equal to width of brick, laid dry on edge vertically using Fly Ash Brick (Non-Modular) Class 7.5 including necessary excavation and earthwork in any type of soil complete all as specified and directed.

M&L for Thermoplastic road marking paint not less than 2mm thick, white or golden yellow in colour, conforming to BS-3262, in lines, arrow, dashes & letters not exceeding 15cm in width, applied hot, using application unit and retroreflective glass beads @ 250 to 300 gm/Sqm to withstand vehicular traffic load, laid as per manufacture's instructions etc complete all as specified and directed. Make: Asian/STP Ltd/Automat/3M.