Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 70,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_667470_1Bid Award Id
ViewTender No
GE/PAF-36/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
REPAIR/MAINT OF EXTERNAL ELECTRIC SUPPLY AND EXTERNAL WATER SUPPLY DISTRIBUTION SYSTEM AND ALLIED WORKS AF STATION DALHOUSIE UNDER GE AIR FORCE PATHANKOT
BOQ Items
... More
Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed by Engineer-in-Charge.
48
-
-
... More
Taking up or down steel tubing of 15/20mm bore and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete with all fittings & valves etc. (Excavation shall be measured and paid separately under relevent items) complete all as specified and directed by Engineer-in-Charge.
36
-
-
... More
All as per description of srl item No.5.00 above but 25 mm bore pipe complete all as specified and directed by Engineer-in-Charge.
48
-
-
... More
All as per description of srl item No.5.00 above but 40/50mm bore pipe complete all as specified and directed by Engineer-in-Charge.
168
-
-
... More
All as per description of srl item No.5.00 above but 80mm bore pipe complete all as specified and directed by Engineer-in-Charge.
72
-
-
... More
M&L and laying for tubes medium grade galvanized with all fittings laid in trenches of size 20mm bore dia complete all as specified and directed by Engineer-in-Charge.
24
-
-
... More
All as per description of srl item No.9.00 above but 25mm bore pipe complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
All as per description of srl item No.9.00 above but 40mm bore pipe complete all as specified and directed by Engineer-in-Charge.
36
-
-
... More
All as per description of srl item No.9.00 above but 50mm bore pipe complete all as specified and directed by Engineer-in-Charge.
36
-
-
... More
All as per description of srl item No.9.00 above but 80mm bore pipe complete all as specified and directed by Engineer-in-Charge.
24
-
-
... More
Re-fixing/re-laying only steel water tubing of size 15/20mm dia taken out undr Srl item No 4 above fixed to wall and ceiling or laying floors/trenches including cleaning and re-running the old threads and fitting such as sockets, elbows, union sockets or any fittings required at site complete all as specified and directed
12
-
-
... More
All as per description of srl item No 14.00 above but 25mm bore pipe complete all as specified and directed by Engineer-in-Charge.
18
-
-
... More
All as per description of srl item No 14.00 above but 40mm bore pipe complete all as specified and directed by Engineer-in-Charge.
48
-
-
... More
All as per description of srl item No 14.00 above but 50mm bore pipe complete all as specified and directed by Engineer-in-Charge.
48
-
-
... More
All as per description of srl item No 14.00 above but 80mm bore pipe complete all as specified and directed by Engineer-in-Charge.
48
-
-
... More
Material and labour in replacement of Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 20 mm and length as complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
All as per ser item No 19.00 above but 25mm bore pipe complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
All as per ser item No 19.00 above but 40mm bore pipe complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
All as per ser item No 19.00 above but 50mm bore pipe complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
All as per ser item No 19.00 above but 80 mm bore pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Supply and fixing in replacement of 80 mm bore Gun metal butterfly valve with necessary rubber gaskets, nuts and bolts and washers of suitable size complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
All as per ser item No 24.00 above but 50mm bore pipe complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply and fixing in replacement of internal threaded Brass foot valve 50mm bore complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing in replacement of non-return sluice valve of 50 mm bore cast iron flanged type complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
All as per ser item No 27.00 but 80 mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Supply and fixing in replacement of Sluice Valve flanged/thread type of length required at site, class PN-1.6 complete including necessary fixing accessories complete such as nuts, bolts, washers gaskets and packing materials ISI marked all as specified and as directed by engineer in charge for 80mm dia bore of pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for replacement of Water meter Woltman type , Magnetic Drive, C.I. Body, ISO 4064, Flanged Ends, Class B, size 50 mm. Make Kranti incl flange 50 mm - 2 Nos, Nut & Bolts - 8 Nos. all as per sample complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
All as per ser item No 30.00 but size 125 mm with Reducer 125 mm x 100mm - 2 Nos complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour in repair for construction of valve pit brick masonry, internal size 600x600x900mm (from top of PCC to bottom of cover) including excavation in any type of soil returning, filling around foundation are removal of surplus soil to a distance not exceeding 50m PCC 1:4:8 type D2 in foundation brick work in cement mortar 1:6, 6mm thick plaster in cement mortar 1:4 to internal & External surface of covered pit with MS sheet over 03mm thick with locking arrangement handle fixing arrangement and painting with black oil paint two coat over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
All as per item No 32.00 above but size 600x600x600mm complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing replacement of fully automatic star delta motor starter with or without sheet metal enclosure including single phase protection, 415 Volts, 3 Phase 50Hz of capacity 50 HP all as specified or required on site and as directed by Engr-in-charge.
2
-
-
... More
All as per item No 34.00 above but capacity 30 HP complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing in replacdement of DOL Starter in sheet-steel enclosure, AC-3 phase, 415 Volt 50 Hz for Centrifugal motor of rating 5 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Supply only High Strength Calcium based granular chlorination chemical containing appropriate qty of dispersants / corrosion inhibitors to prevent encrustation / scalling in distribution system. The brand & make of chlorination chemical must be stated and certified by All India Institute of Hygine & Public Health (Govt. of India), conforming compliance to all the above specifications with a declaration from the Laboratory that from the Technical strength, stability, health, safety, and operational point of view, as well as the fact that this product is used for drinking water applications for consumption by humans, the brand and make of calcium based granular chlorination chemical is suitable for drinking water chlorination and is recommended for use. The report must indicate that the sample has been drawn by All india Institute of Hygine and Public Health. (Drum of 45 Kgs) complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
Material and labour for cleaning and removing all deposite materials like sand, mud, vegetation, scales and dirt etc by pumping out or by manually completetc with the help of wire brush and washing with Bleaching powder, applying one coat of lime wash inside the tank and from mouth of circulating pipe etc for RCC UG/Overhead tank of upto 5000 Gallons capacity. Note : Capacity of tank, date of cleaning & next due date of cleaning of tank be painted on tank with white & black paint as per directed by Engineer-in-charge.
8
-
-
... More
All as per description of ser item No 38.00 above but of capacity 10000 to 17000 gallons complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
All as per description of ser item No 38.00 above but of capacity 50000 gallons complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
All as per description of ser item No 38.00 above but PVC tank of capacity 5000 Ltrs complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Material and labour for two coat of cement base paint with camouflage pattern over preparation of old surface on over head water tank of capacity 10000 gallon up to height of 12 meter complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Supply and fixing in replacement of Rotational moulded polyethylene (HDPE) water storage tank 500 litre capacity (Cylindrical vertical with closed top), black in colour, ISI marked, multilayered construction, hoisted and fixed in position all as specified in MES Schedule Part - I including provision of 25X100 mm GI nipples with check nuts for inlet, outlet wash and overflow pipe including lowering of old/unserviceable waterstorage tank of any description complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Material and labour in repair for Lagging to pipes all around with 40 mm thick bonded mineral wool performed `SNAP ON` pipe section of density 144 Kg/cum and provided with chicken mesh wire netting 25 gauge, 20 mm mesh on pipe of internal dia 20/25 mm including rendering cement plastering 15 mm thick (1:3) on top layer of lagging complete all as specified and directed by Engineer-in-Charge.
180
-
-
... More
All as per description of srl item No.44.00 above but 40mm thick section and 40/50 mm bore pipe complete all as specified and directed by Engineer-in-Charge.
150
-
-
... More
All as per description of srl item No.44.00 above but 40mm thick section and 50/80 mm bore pipe complete all as specified and directed by Engineer-in-Charge.
100
-
-
... More
Supply and fixing in replacement of maintenance free battery 12 volts 180 AH including battery lead, terminals and intial charging of battery complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and laying ,testing and connecting in replacement of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core with suitable lugs complete all as specified and directed by Engineer-in-Charge.
380
-
-
... More
All as per description of srl item No.48.00 above but 35 Sqmm 3½ core with suitable lugs complete all as specified and directed by Engineer-in-Charge.
180
-
-
... More
All as per description of srl item No.48.00 above but 70 Sqmm 3½ core with suitable lugs complete all as specified and directed by Engineer-in-Charge.
100
-
-
... More
Supply, fixing and laying in replacement of DWC pipe (Red Colour) of size 50/38 mm dia (outer dia) with coupler including passing the LT Cables of size 16-70 sqmm through the DWC pipe for protection of cable complete all as specified and directed by Engineer-in-Charge.
300
-
-
... More
Material and labour in replacement of tubing GI light grade 50mm bore for cable protection laid in ducts, fixed to wall or poles including fixing arrangement complete all as specified and directed by Engineer-in-Charge.
73
-
-
... More
Material and labour for Strip opening of electric motor capacity 5 HP to 30 HP unscrewing bolt, removing burnt winding cleaning of slot and rewinding with suitable size of super enameled copper winding wire ( qty of winding wire shall not be less than 1 Kg/HP and not more than 1.2 Kg/HP leathered sheet sleeve work, cotton thread (Tape and varnishing with ‘F’ class insulating varnish including replacement of unserviceable bearing of required size /re-assembling after repair complete all as specified and directed by Engineer-in-Charge. Note: - (a) Old material shall be the property of contractor. (b) The credit for old material shall deemed to be included in the rates quoted by contractor.
80
-
-
... More
All as per description of srl item No.53.00, but 50 HP motor complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
All as per description of srl item No 53.00, but 5 HP submersible motor set complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour for dismantling of pump set 30/50HP, 10/11 stage centrifugal pump set of any Make & type installed at pump house and shifting the pumping set to Pathankot for carrying out the following repairs: -
(i) Repairing/overhauling of pumping set with replacement of gun metal impellers , bushes, bearings, diffusers, key for impellers, metalling and machining of pump shaft, packing gaskets, nuts, bolts etc and any other items required to make the pumping set serviceable. (ii) Reassembling the pumping set and reconnecting suction and discharge piping after making proper alignment with motor including testing on completion to the entire satisfaction of Engr-in-charge. Note: - (a) Old material shall be the property of contractor. (b) The credit for old material shall deemed to be included in the rates quoted by contractor.
2
-
-
... More
All as per description of srl item No.56.00, but 10 HP centrifugal pump set complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
All as per description of srl item No 56.00, but 5 HP submersible pump set complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Material and labour in replacement of MS studs, nuts and bolts of any size and any length with suitable Mild Steel washer of any size for jointing of flange pipes/valve gland etc,complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Fabrication, installation and testing in replacement of LT feeder piller box floor mounted dust/vermin proof outdoor type, poweder coated of size 0.60x0.85x0.50 mtr factory fabricated, made out of MS sheet of thickness 3.15mm mounted on angle iron legs made out of angle iron size 40x40x6mm with friont & rear opening with locking arrangement, powder coated, contain bus bar chamber to accomodate 3phase & 1 nutral copper busbar of size 40 x10mm fixed on epoxy based insulators in horizontal position (steped manner) in feeder pillar including necessary excavation and PCC work 1:2:4 complete all as specified and directed by Engr-in-charge ( Note).All accessories pre wired suitable size copper conductor cable icomplete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing in replacement of PVC insulated and PVC sheated industrial 3 core flat submersible cable with bare bunched copper conductor for submersible pump motor with voltage grade 1100 volts as per conforming IS: 694/1990 of size 6 Sqmm complete all as specified and directed by Engineer-in-Charge.
60
-
-
... More
All as per description of srl item No.61.00, but size 10 sqmm complete all as specified and directed by Engineer-in-Charge.
90
-
-
... More
Supply and fixing in replacement of single core copper multistrand conductor flexible PVC Insulated heavy duty Industrial cable (unsheathed) 1100 volts size 16 sqmm complete all as specified and directed by Engineer-in-Charge.
90
-
-
... More
Material and labour for cleaning of MES water supply installations / campus of Karenlu Nala PH approx area 150 sqm by surface dressing or trimming of natural ground to remove small unequalities n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth/snow ), cleaning of drains & carrying away the rubbish to a distance of n.exc 50 mtr away complete all as per specified and direction of Engr -in-charge
8
-
-
... More
All as per item No 64.00 above but Lakkarmandi PH approx area 250 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All as per item No 64.00 above but Choutha Mod PH approx area 250 Sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All as per item No 64.00 above but Dainkund area approx area 250 Sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All as per item No 64.00 above but Bakrota approx area 150 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All as per item No 64.00 above but Motitiba pump house approx area 300 Sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Material and labour for spray painting of motor & pump including base plate, connecting sluice valve , incoming and outgoing pipes with two coats of Anti corrosive paint over a coat of red oxide primer for capacity 30 HP to 50 HP complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
All as per item No 70.00 above but 3HP to 10 HP complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Supply only Chloroscope Kit complete box for water chlorine testingcomplete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Supply only "O" Todoline solution for water testing purpose in 500 ml bottle complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Repair and servicing of existing pump star delta starter panels of any size and capacity by replacing unserviceable components such as contactor, relays, etc and tightening of all connecting points, cable connections including replacement of wires, push button and indicator lamp complete all as specified and directed by Engineer-in-Charge.
(Note :- (i) Parts such contactor, relay and timer required for replacement shall be measured and paid seperately under appropriate items given here in after.) (ii) Replacement of wires, push button and indication lamp are inclusive in quoted rate
6
-
-
... More
Supply and fixing in repair 3 pole power contactor AC, 415 Volt, with required NO + NC & Coil voltage 380V to 415V, suitable for 30 to 50HP water pump complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing in repair 3 pole power contactor AC, 415 Volt, with required NO + NC & Coil voltage 380V to 415V, suitable for upto 15 HP water pump complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing in repair Thermal over load relay for 3 Phase AC Motor starter, suitable upto 15 HP water pump, relay setting range 12.0 to 30.0 Amps complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Supply and fixing in repair Electronic Timer, 3 - 30 Sec 415V complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Supply and fixing in repair single phase preventor,complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
M&L in repair for PCC 1:3:6 type-C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete incl necessary form work wherever required and incl demolition of Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, all as specified and directed at site.
1
-
-
... More
Supply and fixing in repair MS mechanical joint with rubber washer, mild steel screw bolts (machine made) with screwed both ends of dia as per flange hole and required length each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 50mm complete all as specified.
4
-
-
... More
All as per item No. 81.00 here-in-before but suitable for bore of pipe 80 mm complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Material and labour in repair for mild steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit and similar work confirming to Fe.290.Gde-E-165 incl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided complete all as specified and directed by Engineer-in-Charge.
157
-
-
... More
Supply and fixing in replacement of Heavy Duty FRP tank capacity 150 ltr for chemical dosing system including all fittings as per site requirement complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour in repair for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 mtr long buried directly and vertically in ground with top edge not less than 1.25 mtr below ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing strip of 32x6 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 32x6 mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing in replacement of drop out fuse unit, explusion type for out door air break gang oprated switch, single pole mounted on and including insulators for 11 KV working pressure fixed to and including MS channel with nuts, bolts and washer etc synthetic bounded fuse tube complete with line capcity suitable for current carrying capacity upto 100 Amps all as directed including taking down old one all as specified and as directed. Make:- Jaipuria/MEI/Pactil/Atlas
5
-
-
... More
S&F in replacement of vertical type air break switch, gang operated, tripple pole, mechnically operated, outdoor type, with all fittings and accessories mounted on and including HT 11 KV Polymer insulators and steel channel frame, GI operating rod 25 mm dia of suitable length to worked from ground, including locking arrangements , suitable for 11000 volts, 400 Amps current rating complete including dismantling existing one all as specified and as directed. Make :-MEI/Pactil/Atlas
8
-
-
... More
Supply and fixing in replacement of insulator pin type porcelain, vitreous, white, brown or green including one galvanized mild steel spindle two GI washers and one nut of size 150 mm height 150mm dia suitable for 11000 volts HT grade complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Supply and fixing in replacement of Disc type insulator 145 mm height 255 mm dia suitable for 11000 volts HT grade porcelain vitreous white,brown or green including galvanized mild steel sectional straps 38X5mm, insulator bolts dia 20mm, washers and nuts all as specified including removing of old unsv items complete all as specified and directed by Engineer-in-Charge.
45
-
-
... More
Supply and fixing in replacement lightning arresters suitable for 11000 Volts,expulsion type complete with all fittings, transmission class, dischange capacity 65 KA complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Dismantling ACSR or AAC conductor complete of any type and size, complete all as specified and directed by Engineer-in-Charge.
2.75
-
-
... More
Supply and stringing ACSR conductor in replacement of (Weasel/ Ferret) on on HT over head line and four ploe structure for bus bar line securing on pole complete including necessary binding work, jumpering, PG clamp, maintaining proper sag as per IE rule including taking down old conductor of any type /size and removing from site,complete all as specified and directed by Engineer-in-Charge. (Note :- (a) Rate is inclusive of jumper on cutout point/2 pole structure/4 pole structure shall be provided with PVC insulated sleeve.
2.75
-
-
... More
Material and labour in replacement for cross arms bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for disconnecting the electric supply from the existing RMU/VCB/Transformer/HT poles and meggering the HT under ground cable for its IR value and ensuring the servicebility by HT megger,locating the faults by HT fault finder instrument for any distance and reconnect the HT cable. NOTE:- (i) Earth work included in the quoted rate (ii) Joint kit and HT UG Cable shall be measured and paid separetly complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Supply and replace Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core 95 sqmm XLPE armoured aluminium conductor cable . Including cutting and removing existing unserviceable joint, excavation near 2 pole structure / HT Panel board / Transformer and taking out loop cable from trench and refilling the trench with excavated material complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
All as per item no 95.00 above but indoor termination heat shrink type joint complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
All as per item no 95.00 above but outdoor termination heat shrink type jointcomplete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
Material and labour for galvanized steel wire 4 mm dia for earth wire/ guard wire on HT poles stretched without kinks, bend and binding with wire including fabrication of cradles hexagonal/ rectangular guards, spacers, road crossing etc. including taking down old wire of any type shape, size and removing from site, complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for unbinding from insulators ACSR conductor any size of HT over head line for repairs, restretching of ACSR conductor to achieve proper sag and rewinding to the insulators using aluminium/GI wire all as required at site or directed. Note:- Distance between two poles irrespective of no of lengths of conductor shall be considered as a single span complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Material and labour for cutting/ trimming of tree branches clearing 5 metres horizontal and 5 metres vertical distance from both sides of conductor including removing branches from site, complete all as specified & directed.Note:- (i) Clearing branches from both sides of conductor in between two consequtive poles shall be considered as one span irrespective of distance between poles.(ii) Cost of T&P required for cutting and removing branches shall be deemed to be included in rate quoted by bidder complete all as specified and directed by Engineer-in-Charge.
60
-
-
... More
Material and labour for painting to four pole structure made out of steel tubular HT poles, 11m long including cross arms, channels, angle iron support, bracings, clamps etc. with two coat of aluminum paint superior quality of approved make on surfaces exposed to view above PCC benching including preparation of old painted surfaces by scraping etc complete including making 30 cms wide strips (total 05 Nos) with white and black paint alternatively and writing pole numbers. of 2 inches bold letters with black paint after painting,complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Material and labour for painting to two pole structure made out of steel tubular HT poles, 11m long including cross arms, channels, angle iron support, bracings, clamps etc. with one coat of aluminum paint superior quality of approved make on surfaces exposed to view above PCC benching including preparation of old painted surfaces by scraping etc complete including making 30 cms wide strips (total 05 Nos) with white and black paint alternatively and writing pole numbers. of 2 inches bold letters with black paint after painting,complete all as specified and directed by Engineer-in-Charge.
16
-
-
... More
Material and labour for painting of steel tubular/rail HT poles, 11m long including cross arms, channels, angle iron support, bracings, clamps etc. with one coat of aluminum paint superior quality of approved make on surfaces exposed to view above PCC benching including preparation of old painted surfaces by scraping etc complete including making 30 cms wide strips (total 05 Nos) with white and black paint alternatively and writing pole numbers. of 2 inches bold letters with black paint after painting, complete all as specified and directed by Engineer-in-Charge.
95
-
-
... More
Supply and fixing in replacement of Danger Notice Plate fabricated of 1.6mm Danger Notice Plate fabricated of 1.6mm white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of approved size, for HT, 25cm x 20cm size complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Material and labour for anti climbing device, spikes type, fabricated out of MS bars (Round,Square or flat) 12 mm dia round bar made out of 40x6 mm MS flat including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole spike welded to flat iron bolt, nuts washers including one primer coat,one under coat and two finishing coats of silver aluminium paint including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
0.5
-
-
... More
Material and labour in replacement for Earthing complete with galvanised steel earth plate electrode 60 X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing GI Strip 25X4 mm as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, with CI cover,funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed with earth resistance not more than 5.0 OHMS. Note- In case earth resistance more than 5.0 ohms, the contractor wiil re earthing at no extra cost, complete all as specified and directed by Engineer-in-Charge.
14
-
-
... More
Material and labour in replacement for Earthing complete with Copper earth plate electrode 60 X 60 cm X 3.15 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing Copper Strip 20X3 mm as earthing lead, by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, with CI cover, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed with earth resistance not more than 5.0 OHMS. Note- In case earth resistance more than 5.0 ohms, the contractor wiil re earthing at no extra cost.
15
-
-
... More
Material and labour in replacement for Earth continuity conductor or main earthing lead fixed to walls on batten or recess or chases or burried in ground or drawn in conduit/pipes or fixed to poles or any other indicated situation for loop earthing etc as required 25X4mm galvanised iron strip all as specified.
40
-
-
... More
Material and labour in replacement for Earth continuity conductor or main earthing lead fixed to walls on batten or recess or chases or burried in ground or drawn in conduit/pipes or fixed to poles or any other indicated situation for loop earthing etc as required 20x3mm copper strip complete all as specified and directed by Engineer-in-Charge.
20
-
-
... More
Material and labour for carrying out calibration of HT VCB switchgear 800/630/400 Amps, and 11 KV HT RMU SF6 VCB breaker all as per OEM instructions (Make:ALSTOM/Yamuna power/ CG/ AREVA /ABB) after taking proper shut down and disconnecting the cables from panel and VCB Breakers, calibration of over fault relay, earth fault relay, checking of alignment of VCB isolating contacts, servicing of operating mechanism including tripping and closing system of the breakers, dehydrating, decorbonising of panel, bus section & circuit section including incoming/outgoing cable and necessary HT insulation at joints. Removing perished monoplus compound cleaning and re-insulating with HT taps wherever necessary, with and including replacement of burnt out/defective spares like tension springs, tortion springs, nut bolts, washers of suitable size, lingers etc., under the supervision of authorised dealer/ representative, and refixing the panel in its original position and testing entire satisfaction of Engineer -in- Charge .Note : (i) The quoted Rate shall be deemed to include of visiting and inspection of VCBs/RMU of technician/mechanic and minor spares etc. (ii) If any burnt out/defective items like moving/fixed contacts, tripping coils,earth fault relay etc,will be measured and paid separately under respective items complete all as specified and directed by Engineer-in-Charge.
9
-
-
... More
Material and labour for breaker Apoxy body suitable for VCB trolly as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for Tulip Contact 630A suitable for VCB trolly as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour for Socket Contact 630/800A suitable for VCB trolly as per existing make and modle 11 KV,400/630/800 Amps
3
-
-
... More
Material and labour for Vacuum Interrupter Assembly with Flex connection suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for Shunt Trip Coil 24V DC (OG 835) / 220V AC (OG 870) suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Material and labour for Motor Charge Spring Mechanism assembly complete fitted with close/ trip Coils (Mention trip, close & motor voltage) Motor with Gear Assly 110V AC/220V AC,Gear Box for Motor with Gear Assembly (Bosch make)110V AC/220V AC, Ratchet wheel Assebly all as specified and directed.suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for Solenoid Mechanism (SX-15) with coils & aux. switch (Mention trip & close voltage) suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for Auxiliary switch 12-way suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for Carriage Assembly for breaker complete with Lead Screw with Bevel Gear, Lifting Nut (Brass) Pinion Assembly, Lifting Shaft Bush, Modified Bell Crank suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for Secondary Plug and socket set Board Assembly (28 WAY)suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for Shutter Busbar – Red & Yellow suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Material and labour for disconnecting the electric supply from the existing VCB and disconnect the existing unserviceable/Burnt current transformer set (Set of 3 Phase) from VCB panel and supply & Fixing and testing in replacement new resin cost current transformer set (Set of 3 Phase)11000 Volts HT copper wounded with mild steel parts 100/5 +5 voplts single phase class 0.5 of air cooled accurecy dry type VA15,VK ≥ core 1 R at 75 C as per IS-2705, IEC-60044 connection with panel, properly after installation and testing etc complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for disconnecting the electric supply from the existing VCB and disconnect the existing Potential transformer set (set of 3 Phase) indoor type with panel and supply & Fixing and testing in replacement new resin cost Potential transformer set (set of 3 Phase) 11000 Volts HT copper wounded with Ratio 11000 Volts/110 Volts burden 100VA-3V class-I 50 HZ , HSV-12 Volts secondry voltage 110 dry type as per sample,properly connection with HT panel after installation and testing etc complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour in replacement of Breaker control switch (TNC) Trip,Neutral,Close (32/40A/660V AC) suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour in replacement of Push to Trip Knob (Red & Green) Assembly With spring & Housing suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour in replacement Power Pack of capacity 100 VA complete with all accessories input votage 110VAC 50C/S 3 Phase and Output 24 V DC suitable for VCB as per existing make and modle for 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour in replacement of Charge -free indicator Assembly with spring suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour in replacement of HRC Fuse-Pt HT Side(VTF-11, 3A / VTF 6.6, 3A) suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour in replacement of Isolating Contact Flat Type - 800/630A suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour in replacement of Hand Charge spring mechanism (SPX) with coils (Mention trip & close voltage) suitable for VCB as per existing make and modle 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Material and labour in replacement of for three phase Voltmeter 11 KV digital type suitable for VCB 11 KV panel,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour in replacement of for three phase Amp meter 11 KV digital suitable for VCB panel ,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour in replacement of Voltmeter selector switch, for VCB 11 KV,400/630/800 Amps complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour in replacement of Phase Indicator of red,yellow,blue,green 230V or 110V suitable for for VCB 11 KV,400/630/1200 Amps complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Supply and Fixing in replacement of Air break (Aux) Controller relay, 24V DC,as per existing make and capacity/Modle for VCB 400/630/800 Amps capacity, complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Supply and Fixing in replacement of charging motor 230V DC/AC for VCB 400/630/800 Amps capacity,complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Material and labour in replacement of Over current and earth fault relay Auxiliary universal supply 18-52 V AC/DC operated,Digital I/P + O/P(Make: CG/L&T/ ABB) self powered CGI 14N/14C suitable for VCB for VCB 800/630/400 Amps capacity, NOTE : (i) Fixing of protection relay shall be carried out through O.E.M of manufacturer's engineer /technician only complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Supply and Fixing in replacement of Release / Closing Coil 12V/24V DC to 220V DC for VCB 800/630/400 Amps capacity,Type:-VMX/UNIVAC.
Note :- for Item No 111.0 to 138.0: The spares shall be measured and paid only when required at site during servicing of VCBs.
2
-
-
... More
Material and labour for dehydration, filtration, heating and refilling of old transformers oil after testing the same for dielectric strenghth not less than 45 KV (RMS). Note:- (a) Dehydration and filtration can be carried out at site by dehydration machine otherwise the same shall be got done from the manufacturing workshop of transformers complete all as specified.(b) Contractor shall ensure no wastage of transformer oil.(c) Safety of transformer during filteration shall solely be the responsibility of contractor and any damaged caused to transformer during the operation of filteration shall be made good by contractor at his own and no claim for any expanditure on this account shall be entertained during execution of work or later stage.(d) Contractor shall ensure that the conservator tank are full before starting the dehyderation.(e) Testing of transformer oil for BDV and acidity as per IE rules all as specified and directed.(f) Test results shall be submitted to Engineer-in-Charge equipment wise complete all as specified and directed by Engineer-in-Charge.
2000
-
-
... More
Supply and top up of transformer insulating oil HV grade having die-electric stength not less than 45 KVA (RMS) at 2.5mm gap complete all as specified and directed by Engineer-in-Charge.
350
-
-
... More
Material and labour for carrying out servicing at site disconnecting / dismantling carefully primary & secondary HT/LT connection from transformer for servicing of capacity 63 KVA to 160 KVA complete,Opening the transformer, safely collecting transformer oil, taking out core of transformer by disconnecting the same from HT/ LT bush rods ,Checking /Repair /Replacement of HT/LT Bush,cork sheet etc. Assembly of transformer after carrying out the repair work and making all HT/ LT connections with respective bush rods.Note : (i) The quoted Rate shall be deemed to include of visiting and inspection of Transformer of technician/mechanic.(ii) If any burnt out/defective items will be measured and paid separately under respective items.(ii) Installation of transformer on locations as directed by Engineer in Charge on existing HT pole structure/ plinth and making all HT/ LT and earth connections including testing the transfromer complete all as directed.(iii) Cost of necessary tools and plants and transpotation to workshop and return back at site such as Vehicle, hydra/crane etc should be deemed to be included in the unit rate quoted complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
All as per item Ser No.141 here in before but of capacity 200 KVA to 400 KVA complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and replacing of Ceramic Bush insulators with brass spindle rod complete with cork sheet gasket, washers, nuts and check nuts on HT side as per existing size, shape and specification for 11/0.433 KV transformer (outdoor/indoor) type transformers of capcity not exceding 160 KVA complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
All as per Item Ser No.143.00 here in before but capcity 200 KVA to 400 KVA complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Supply and replacing of Ceramic Bush insulators with brass spindle rod complete with cork sheet gasket, washers, nuts and check nuts on LV side as per existing size, shape and specification for 11/0.433 KV transformer (outdoor/indoor) type transformers of capcity not exceding 160 KVA complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All as per item Ser No. 145.00 here in before but capacity 200 KVA to 400 KVA complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply and replacing of cork sheet gasket of 6 mm thick size/shape for top cover of transformer upto capacity 63 to 400 KVA. complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Supply and Fixing in replacement air breather assembly of metallic body complete filled with fresh blue coloured silica gel suitable for indoor/out door type transformer of capacity 63 KVA to 400 KVA complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Supply and replacing of fresh silica gel in breather assembly of transformer complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Material and labour for painting of transformers Indoor/Outdoor type externally spray painting with synthetic enameled paint of gray color after cleaning surfaces thoroughly with thinner and scrapper and preparing the surface to required standard including Sticker/writing and marking such as Srl No, MES No & Capacity on the body of transformer capacity upto 100 KVA. including colour wash of transformer plate fromcomplete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
All as per item Ser No.150.00 here in before but capacity 150 KVA to 400 KVA complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Material and labour for disconnecting / dismantling carefully primary & secondary HT/LT connection of unserviceable/ serviceable out door/indoor type Transformer up to 400 KVA complete its foundation/substation and safely shifting one sub station to another sub station as directed by Engr-in-Charge and reconnection of cabling, earthing, install testing and commissioning of the Transformer complete all as specified & directed. Note: Cost of necessary tools and plants such as Vehicle, hydra/crane etc should be deemed to be included in the unit rate quoted complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Material and labour for complete rewinding of unserviceable off load burnt transformer of HV copper coil and LV copper coil using proper size DPC super enameled copper winding wire of appropriate guage and grade,with insulation material suitable for 11/0.433 KV transformer capacity upto 250 KVA including repair/replacement of damaged core also taking out carefully burnt unserviceable copper winding of coils & core complete all as specified and directed. NOTE- (i) Cost of necessary tools and plants and transpotation to workshop and return back at site such as Vehicle, hydra/crane etc should be deemed to be included in the unit rate quoted (ii) Safety of transformer during Repair shall solely be the responsibility of contractor and any damaged caused to transformer during the operation of repair or in transpotation shall be made good by contractor at his own and no claim for any expanditure on this account shall be entertained during execution of work or later stage.(iii) The bidder strictely should be arrange Joint inspection at work shop with MES Rep (JE E/M /AGE E/M) to ensure damaged of transformer.(IV) Installation of transformer on locations as directed by Engineer in Charge on existing HT pole structure/ plinth and making all HT/ LT and earth connections including testing the transfromer on full load for 3 hours and on 10% extra load for two hourscomplete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
All as per item Ser No.153 here in before but capacity 300 KVA to 400 KVA complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Material and labour for carrying out calibration of Air Circuit Breaker 630 Amps, over fault relay, earth fault relay, checking of alignment of ACB isolating contacts, servicing of electronic operating mechanism including tripping and closing system of the breakers, dehydrating, decorbonising of panel, bus section & circuit section. Removing perished monoplus compound cleaning and re-insulating with LT taps wherever necessary,and including replacement of burnt out/defective spares like tension springs, tortion springs, nut bolts, washers of suitable size, lingers etc., under the supervision of authorised dealer/ representative, and refixing the ACB breaker in its original position and testing entirecomplete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Supply and fixing 11000 Volts HT Dropout Fuse element 10A to 60Amps complete all as specified and directed by Engineer-in-Charge.
17
-
-
... More
Supply and laying/spreading for loose filling of Hard core of stone broken or boulders of guage 40 to 80mm at electrical sub station 4 pole/2 pole structure including bricks up to 1 feet hight with (1:2:4) 2 mm theak plaster work and white wash arround the 4 Pole/2 Pole structure up to area of 25mtrx25Mtr length complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Material and labour in replacement for high voltage PVC insulating mate 3 mm thick to withstand the current leakage upto 11 KV laid in HT electrical installation by using company recommended adhesive,ISI Marked,CM/L: 8963811,Conforming to IS:15652. complete all as specified and directed by Engineer-in-Charge.
50
-
-
... More
Material and labour in repair for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in coping of HT Poles 4 poles structure /2 Pole structure/ Single poles including necessary form work where required and fair finishing to the exposed surfaces and two coat of White wash including dismanteling work complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and mounting on wall with necessary fixing arrangement sign board 3.00 Meter length X 1.00 Meter width X 0.30 Meter depth fabricated with aluminium frame with acrylic sheet duly written " 11 KV Sub Station AGE B/R (AF) Dalhousie " with bold letters reflective tape on acrylic sheet as approved by Engr-in-charge including 02 Nos, 4 feet 20 watts LED Tube light fitting wiring with 1.5 sqmm size copper conductor and making connections complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Dismantling bent/tilted HT electric pole any type 11 mtr long including taking down by demolishing the PCC/coping including complete all as specified and directed by Engineer-in-Charge.. Note : Rate quoted shall include cost of excavation, dismantling of conductor, cross arms and insulators etc.
10
-
-
... More
Material and labour for cement concrete in foundations, filling and mass concrete type D2 1:4:8 with 40mm graded aggregate for pole bedding complete all as specified and directed by Engineer-in-Charge.
1.08
-
-
... More
Material and labour for cement concrete in foundations, filling and mass concrete type C2 1:3:6 with 40mm graded aggregate for foundation of pole complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Material and labour for cement concrete in foundations, filling and mass concrete type B2 1:2:4 with 40mm graded aggregate for coping of pole complete all as specified and directed by Engineer-in-Charge.
0.27
-
-
... More
Material and labour for Stay tightning for HT/LT pole any type using necessary T&P as required on site complete all as specified and directed by Engineer-in-Charge.
13
-
-
... More
Material and labour for Stay assembly set complete with accessories like stay rod/strand/plate , loop type insulator, clamps, excavation, concreate etc for LT/HT pole any type using necessary T&P as required on site complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Material and labour for cleaning of MES Electric supply installations / campus by surface dressing or trimming of natural ground to remove small unequalities n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth /snow) and carrying away the rubbish to a distance of n.exc 50 mtr away complete as on required basis for the Main Receiving Station (MRS) Motitiba approx area 600 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All items as per 167.00 but Dhobi Ghat sub stn approx area 120 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All items as per 167.00 but Bakrota (MRS) approx area 450 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All items as per 167.00 but Choutha Mod sub stn approx area 200 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All items as per 167.00 but Lakkarmandi sub stn approx area 200 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
All items as per 167.00 but Dainkund (MRS) approx area 200 sqm complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply, laying and testing in trenches or passing through pipe or duct , XLPE PVC insulated (heavy duty) galvanised steel strip or wire armoured electric cable 11000Volt (E) Grade with stranded aluminium conductor for cross sectional area 95 sqmm 3 core complete all as specified and directed by Engineer-in-Charge.
63
-
-
... More
Material and labour in replacement of steel tubular swaged pole complete with cast iron plate, finial taper plug, bolts, nuts & screws as specified of type 410 SP-55 of 11 meter long including applying two coats of black bituminous paint throughout internally and externally up to the planting depth and remaining portion of the exterior painted with one coat of red oxide primer over two coats of aluminium paint and number marking on pole complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Supply and fixing on wall Electric shock & it's treatment chart of minimum size 50x70 cm in Hindi-English language fitted in proper size of wooden board complete all as specified and directed by Engineer-in-Charge.
14
-
-
... More
Supply and fixing nylon rope of size 20 mm dia multi stranded super flexible type and all as per specified and directed by Engr-in-charge.
40
-
-
... More
Supply only bonding HT Tape 1 inch 10 mtr long EPR rubber material for the purpose of day to day maintenance in HT work complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Material and labour for rectifying day to day HT breakdown due to natural clamities (thunder, lightening, snow fall, tree fall and rain etc) by providing suitable trained Electrician and helper as per requirement with necessary T&P tools at various location in station complete all as specified and directed by Engineer-in-Charge.
94
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements