Military Engineer Services Tender

M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured

Supplying and laying un-reinforced precast concrete cable cover, class LV, type -II, flat Peak, size 300 mm x 180mm x 40mm complete all as directed by Engr - in charge

Supplying and laying un-reinforced precast concrete cable cover, class LV, type -I, flat peak, size 250 mm x 150mm x 40mm complete all as directed by Engr - in charge

Taking out different sizes of XLPE LT cable complete all as directed by Engr-in-Charge.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 10 Sqmm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 16 Sqmm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 25 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 35 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 70 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 95 sq mm.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 120 sq mm.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (Aluminium bus bar cap 200 Amp-04 (b) MCCB three pole with thermal magnetic release adjustable type with breaking capacity 36 KA , 160 A ( incoming ) - 01 (c) MCCB FP 415 V , 100A , 3 pole , 36 KA ( outgoing) - 02 (d) MCB 32 A TPN ,10 KA ( outgoing )-01 (d) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 (e) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-400 Amps with selector switch with CT - 01 (f) RYB LED indicating lamp set of three- 01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a) Copper bus bar cap 400 Amp-04 (b) MCCB 4 pole 415 V adjustable type 400 A breaking capacity 36 KA ( incoming) -01 (c) MCCB 4 pole 415 V ,100 A with breaking capacity 16 KA ( outgoing ) -03 (d) MCCB 4 pole 415 V , 63 A with breaking capacity 16 KA ( outgoing) - 01 (e) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 (f) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-400 Amps with selector switch with CT - 01 (g) RYB LED indicating lamp set of three- 01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply, install, testing and commissioning of electrical panel board outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer incl carry out internal connection with all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following (a) Aluminium bus bar cap 400 Amp-04 (b) MCCB 4 pole 415 V ,400 A with breaking capacity 36 KA ( incoming) -01 (c) MCCB 4 pole 415 V ,63 A with breaking capacity 16 KA ( outgoing ) -05 (d) MCB 63 A TPN ( outgoing ) - 03 (e) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 (f) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-400 Amps with selector switch with CT - 01 (g) RYB LED indicating lamp set of three- 01 Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

Supply,installation, commissioning in repairs of Outdoor type LT panel board not less than 150cmx150cmx80cm made out of 3.15mm thick CRCA sheet vermin proof, including painting with sysnthetic enamelled paint, CPRI approved with colour code PVC sleeves for bus bar, front opened with locking arrangement, closed bus bar chameber, angle iron frame of size 50x50x6mm for skeleton and support embeded in concrete foundation comprising of the following :- a) Aluminium Bus bar 800 Amps for three phase-and neutral - 01 set (b) ACB thermal and magnetic release , 630 Amps, 4 pole - 01 No.(Incoming) (c) MCCB 4 pole 415 V ,63 A with breaking capacity 16 KA ( outgoing )- 06 (d) MCCB 4 Pole 415 V. 100 A with breaking capacity 16 KA ( outgoing) -05 (e) MCCB 4 pole 415 v ,160 A MCCB with breaking capacity 36 KA ( outgoing)-01 (f) MCB 32 A , breaking capacity 10 KA( outgoing)-01 (g) Voltmeter 0-500 volts range with selector switch digital type - 01 Set (h) Ammeter 0-100 amps range with selector switch & CT coils - 01 Set (h) Indicator lamp with holder for RYB- 01 Set Note;-1. Design/ drawing/BOM of the panel board showing the dimension incl accessories to be obtained from panel board manufacturer/supplied to be got approved from GE before placing final order to the manufacturer/suppliers. 2. Anything missing out in technical specification but technically required for the efficient working is deemed to be included in quoted rates.

supply and fixing LT cable route indicator made of cast iron material of 100 mm dia round with 5-6 mm thick with arrow for direction indication with complete paint of whole plate and 3 mm thick endorsed letter showing LT cable complete all as specified and directed by Engr-in -Charge.

M & L for repair and panel door of existing LT panels by replacing the hinges and locks with existing size by means of welding and making good by painting with existing color all as specified and directed by Engr-in-charge.