Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 56,500Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Ca No Cwe/fzr-19/2024-25 Special Repair To Bldg No Np-34 Block Q Zone (md Accn) Of Inf Bde Under Ge(east) Ferozepur Cantt
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_668878_1Bid Award Id
ViewTender No
CWE/FZR-19/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Material and labour for Rendering 10 mm thick cement mortar 1:4 mixed with integral water proofing compound as per manufacturer instruction over the padding concrete while still the concrete is still green,complete all as specified and as directed by Engineer-in-charge
300
-
-
Material and labour for water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/Specifications from bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25@ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including prepration of roof surfaces complete all as specifiedand as directed by Engineer-in-Charge. (b) One layer of APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torched application.Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside groove of parapet walls and shall be finised by a membrane flashing. Note:- (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75 mm length wise and 100 mm width wise of polymeric membranes repectively ansd sealed all overlaps and joints as manufacturer's instructions. (iii) The whole works shall be executed by the authorised company applicator.
300
-
-
Material and labour for two coat of aluminium paint over APP membrane complete all as specified and as directed by Engineer-in-charge
300
-
-
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed by Engineer-in-charge.
10
-
-
Material and labour brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in c:m 1:6 complete all as specified and as directed by Engineer-in-charge.
9
-
-
All as per srl item No 08 here-in-before but using old bricks retrieved from dismantling under ser item 7 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and as directed by Engineer-in-charge.
1
-
-
Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge.
580
-
-
Material and labour for Rendering 12 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
300
-
-
Material and labour for Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
260
-
-
Material and labour for Rendering 5 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed by Engineer-in-charge.
20
-
-
Material and labour for complete removal of old existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as specified and as directed by Engineer-in-charge.
250
-
-
Material and labour for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed of any shade on walls surfaces
300
-
-
Material and labour for Preparation of new plastered surfaces of ceiling & applying two coats of white wash complete all as specified and as directed by Engineer-in-charge.
20
-
-
Material and labour for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed by Engineer-in-charge.
286
-
-
Material and labour for Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.
100
-
-
Material and labour for Preparation of newly plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specified and as directed by Engineer-in-charge.
260
-
-
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise complete all as specified and as directed by Engineer-in-charge.
72
-
-
All as per srl item No 20 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed by Engineer-in-charge.
24
-
-
Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.
86
-
-
Supply and fixing for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.
60
-
-
Supply and fixing 40 mm thick, flush shutter, solid core construction,with particle board core and plywood face panel, commercial type both sides complete all as specified and as directed by Engineer-in-charge.
40
-
-
Supply and fixing 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and as directed by Engineer-in-charge.
37
-
-
Supply and fixing Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”
23
-
-
Supply and fixing Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge. and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”
23
-
-
Supply and fixing Factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-charge and shown on Drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”
6
-
-
Material and labour for Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and as directed by Engineer-in-charge.
150
-
-
Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed by Engineer-in-charge.
56
-
-
Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and as directed by Engineer-in-charge.
25
-
-
Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed by Engineer-in-charge.
13
-
-
Supply and fixing 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and as directed by Engineer-in-charge.
25
-
-
Dismantling timber scantling unframed work as in fillets, rails, posts, rafters, purlins,etc under 40 Sq.cm in section complete all as specified and as directed by Engineer-in-charge.
25
-
-
Material and labour in repair for Plain fillets of 2nd class hard wood, square or rectangular or triangular in section, clean sawn, secured with nails and brads area n exc 3 Sq cm complete all as specified and as directed by Engineer-in-charge.
25
-
-
Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engineer-in-charge.
135
-
-
Material and labour for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
95
-
-
Supply and fixing PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-charge.
36
-
-
Supply and fixing Aluminium bow handle 150 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-charge.
120
-
-
Supply and fixing Aluminium tower bolts 150 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-charge.
114
-
-
Supply and fixing 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified and as directed by Engineer-in-charge.
18
-
-
Supply and fixing Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and as directed by Engineer-in-charge.
45
-
-
Supply and fixing in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed by Engineer-in-charge.
25
-
-
Supply and fixing 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed by Engineer-in-charge.
30
-
-
Supply and fixing 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and as directed by Engineer-in-charge.
18
-
-
Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-charge.
43
-
-
Supply and fixing 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and as directed by Engineer-in-charge.
22
-
-
Supply and fixing Mild steel curtain rod powder coated with fixing side brackets,end cups,rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed by Engineer-in-charge.
50
-
-
Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed by Engineer-in-charge.
2.1
-
-
Material and labour for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, bed blocks,back filling in chowkhats, benching etc including necessary form work complete all as specified and as directed by Engineer-in-charge.
2.1
-
-
Material and labour for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed by Engineer-in-charge.
75
-
-
Material and labour for 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and as directed by Engineer-in-charge.
10
-
-
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded , dry and pointed etc complete all as specified and as directed by Engineer-in-charge.
2
-
-
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed by Engineer-in-charge.
7.6
-
-
Material and labour for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified and as directed by Engineer-in-charge.
76
-
-
Material and labour Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and pigment over sand cushioning complete all as specified and as directed by Engineer-in-charge.
76
-
-
Material and labour sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-charge.
1.9
-
-
Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.
565
-
-
Material and labour Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified and as directed by Engineer-in-charge.
50
-
-
Material and labour for joint less coloured Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified and as directed by Engineer-in-charge.
250
-
-
Material and labour Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and as directed by Engineer-in-charge.
15
-
-
Material and labour Glazeded ceramic coloured (colour & shade as approved) tile 350x250x6 to 7 mm/450x300x6to7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-charge.
250
-
-
Material and labour for Machine cut kota stone slab 18 to 20 mm thick as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over& including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and as directed by Engineer-in-charge.
120
-
-
Material and labour for Machine cut kota stone slab 20-25 mm thick as in skirting,dado of length not less than 500 mm each unit, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and as directed by Engineer-in-charge.
10
-
-
Material and labour for Granite(holes for gas pipe) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat CM 1:4 complete including making circular gas pipe hole, moulding at corners and polishing type complete all as specified and as directed by Engineer-in-charge.
15
-
-
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed by Engineer-in-charge.
150
-
-
All as per item No 67 here-in-before but 20 mm bore tubing.
50
-
-
Material and labour for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and as directed by Engineer-in-charge.
120
-
-
All as per item No 69 here-in-before but 20 mm bore tubing.
40
-
-
Fixing only,after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings complete all as specified and as directed by Engineer-in-charge.(pipes obtained from item 67 to be reused).
30
-
-
All as per item No 71 here-in-before but 20 mm bore (pipes obtained from item 68 to be reused).
10
-
-
Supply and fixing in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-charge.
36
-
-
Supply and fixing in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing in repair piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing in repair stop valves/angle cock,fancy type cast copper alloy,screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fixed complete all as specified and as directed by Engineer-in-charge.
24
-
-
Supply and fixing in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and as directed by Engineer-in-charge.
12
-
-
Supply and fixing Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed by Engineer-in-charge.
24
-
-
Supply and fixing in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and astes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste coupling fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing 600x450mm looking mirror of selected quality mounted on 6mm thick commercial plywood and fixed to wall with plug and screws etc complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and as directed by Engineer-in-charge..
6
-
-
Supply and fixing corner glass shelves 300 mm radius 8 mm thick as per sample radius for bathroom, fixed on suitable support of brass chromium plated clips complete all as specified and as directed by Engineer-in-charge.
10
-
-
Supply and fixing Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and as directed by Engineer-in-charge.
6
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-charge.
9.5
-
-
Supply and fixing Mild steel framed work of Fe-410-0 or Fe-310-0 (Fe-290 Gde-E-165) as in doors or gate of angle or other section with gusset plates,rails, braces etc and fixing complete all as specified and as directed by Engineer-in-charge.
950
-
-
Taking down eaves gutter and rain water pipes any size or pattern including all fitting heads shoes bends swan - necks etc complete all as specified and as directed by Engineer-in-charge.
80
-
-
Supply and fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and as directed by Engineer-in-charge.
60
-
-
Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and as directed by Engineer-in-charge.
20
-
-
Supply and fixing 110 mm dia PVC ( rain water ) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge.
30
-
-
Supply and fixing 75mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.
6
-
-
Supply and fixing 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.
12
-
-
Supply and fixing 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and as directed by Engineer-in-charge.
3
-
-
Supply and fixing 110 mm dia junction single 9 Single or double T) or unequal complete all as specified and as directed by Engineer-in-charge.
3
-
-
Material and labour PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and as directed by Engineer-in-charge.
24
-
-
Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
120
-
-
Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity complete all as specified and as directed by Engineer-in-Charge.
7
-
-
Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as specified and as directed by Engineer-in-Charge.
150
-
-
Material and labour Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for One light/fan/Bell Point controlled by one single pole one way switch.
108
-
-
ditto all as per item No 104 above but for one socket outlet on the same board controlled by one single pole one way switch
24
-
-
ditto all as per item No 104 above but for one 5 amps socket outlet independent controlled by one single pole 5 Amp switch.
24
-
-
ditto all as per item No 104 above but for three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.
18
-
-
ditto all as per item No 104 above but for 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
6
-
-
Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed by Engineer-in-Charge
150
-
-
Supply & Fixing Switch piano flush type 15 amps, single pole one way duly ISI marked. complete all as specified and as directed by Engineer-in-Charge
18
-
-
Supply & fixing Socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as specified and as directed by Engineer-in-Charge
48
-
-
Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and as directed by Engineer-in-Charge
18
-
-
Supply & Fixing bell push flush type 5 Amps duly ISI marked complete all as specified and as directed by Engineer-in-Charge
6
-
-
Supply & Fixing ceiling rose, PVC/Polycarbonate,isolated three terminals complete all as specified and as directed by Engineer-in-Charge
75
-
-
Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge
36
-
-
Supply & Fixing bell ding dong type AC 230 Volt single pole complete all as specified and as directed by Engineer-in-Charge
6
-
-
Supply and fixing in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed by Engineer-in-Charge
12
-
-
Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed by Engineer-in-Charge
6
-
-
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed by Engineer-in-Charge
6
-
-
Supply and fixing LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge
30
-
-
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge
6
-
-
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series VTPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCCB/MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge
1
-
-
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge
6
-
-
Supply & Fixing MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified and as directed by Engineer-in-Charge
1
-
-
Supply & Fixing MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series complete all as specified and as directed by Engineer-in-Charge
36
-
-
Supply & Fixing in repair MCB single pole (SP) 240 volts, 40 Amps, 10 KA 'B' Series complete all as specified and as directed by Engineer-in-Charge
12
-
-
Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series complete all as specified.complete all as specified and as directed by Engineer-in-Charge
6
-
-
Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and as directed by Engineer-in-Charge
6
-
-
Material and labour for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete all as specified and as directed by Engineer-in-Charge including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)
150
-
-
Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and as directed by Engineer-in-Charge
12
-
-
Supply and fixing Sheet metal Meter Box single door minimum size 35x50x25cm for electric meter Factory made of MS sheets/CRCA sheet duly painted with powder paint and door hinged locking arrangement conforming to IS 5039 of 1983. The electric meter/switch box shall be suitable for fixing one number of electric meter and knock out holes for incoming and outgoing cable. Before the powder paint process the sheet steel shall go through the anti corrosion conditioning process in not less than seven tank process. Concealed in wall, including making good distrurbed surfaces with matching colour, complete all as specified and as directed by Engineer-in-Charge
12
-
-
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)
1
-
-
Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and as directed by Engineer-in-Charge
50
-
-
Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan,for laying of cable and getting out,complete all as specified and as directed by Engineer-in-Charge
10.8
-
-
Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and as directed by Engineer-in-Charge.
Notes : (i) Excavation and earth work to be measured and paid separately).
(ii) Thickness of 18 cms after punning shall be considered for payment.
3.24
-
-
Supply and fixing Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work measured separately).
0.32
-
-
Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and as directed by Engineer-in-Charge
6.29
-
-
Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge
4.51
-
-
Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required complete all as specified and as directed by Engineer-in-Charge
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements