Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 81,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681882_1Bid Award Id
ViewTender No
GE(S)/PAT/T-64/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender documents containing General conditions special conditions and particular specifications
BOQ Items
M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in Cement: Mortar 1:6 complete all as specified and directed.
1
-
-
M&L for dubbing out average 10mm thick in Cement Mortar 1:4 on irregular surface of soffits of slabs/Chajja/ Sunshades etc complete all as specified and directed.
80
-
-
M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement complete all as specified and directed.
Note : WPC will be measured and paid separately.
280
-
-
Supply only integral liquid water proofing compound complete all as specified and directed.
10
-
-
Supplying & applying for two component elastomeric acrylic polymer modified cementitious waterproofing coating on Brick level, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTMC1202, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, will be apply on both Positive & Negative side and resist up to 5 Bars of Hydrostatic Pressure. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. After coating will sprinkle Sand on the coating then apply plaster on the coating which is in contractor scope, complete as manufacturer specifications. 5 Year Warranty will be Provided only if Asian Paints Authorize Applicator will do the work, complete all as specified and directed.
40
-
-
M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
360
-
-
M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed.
220
-
-
Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder or manually (if directed) complete all as specified and directed.
2560
-
-
M&L for applying acrylic thick wall care putty on external/internal surfaces of walls/ceilings/soffits etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.
Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.
3420
-
-
Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.
1580
-
-
Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceilings surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed
1140
-
-
Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.
700
-
-
Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
380
-
-
Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness, complete all as specified and directed.
24
-
-
M&L for 100mm thick cement concrete work 1:4:8 type D-2 in flooring etc complete all as specified and directed.
240
-
-
M&L for Glazed ceramic tiles in vertical surface 300X600X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed.
240
-
-
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) Of size 300x300mm for in floors(Bath &WC) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
30
-
-
M&L for mat finish anti skid ceramic tile joint free premium quality coloured tiles 600X600 mm and 6-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.
110
-
-
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc of any description or thickness, laid, bedded and pointed in any mortar complete all as specified and directed.
42
-
-
M&L for full body Virified Ceramic tiles 10 mm thick of light shade of (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc.and including screed bed or bedding layer of 20mm thick of cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
70
-
-
M&L for full body vitrified tiles (Premium / 1St quality) of size 0.60X1.20 in floors etc. laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) and pointed in matching coloured cement based tile joint filler (Roff pidilite or equivalent as approved ) including over 18-20mm thick screed bed in Cement Mortar 1:4 all as specified and directed.
350
-
-
M&L for Machine cut kota stone slab (nearest to 58cmx58cm in size) flooring 18mm (+ 2mm) thick laid over and including 20-22 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 100mm wide border of Baroda Green Marble complete all as specified and directed.
50
-
-
M&L for rubbing, cutting and mirror type granite polishing of existing Kota Stone as in flooring, skirting, steps, shelves etc including filling joints with cement mixed with pigment of same colour complete all as specified and directed.
210
-
-
M&L for pre-polished Baroda Green marble, machine cut as in floorings/ shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 20 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing complete all as specified and directed.
Note : Single piece should be used in steps/cills/jambs/shelves.
60
-
-
M&L for granite (jet black colour/Shade-south indian )of any type machine cut as in flooring shelves/steps/counter tops 18-20mm thick set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar(1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including sides complete all as specified and directed.
35
-
-
M&L for rounding to edges (both side edges) )of stone slabs (of fany description), such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete a specified and directed.
90
-
-
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene, complete all as specified and directed.
90
-
-
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good to disturbed surfaces complete incl ventilators including reqd shape for hold fast block for new frame complete all as specified and directed.
120
-
-
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
25
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and
length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
80
-
-
S&F Factory made solid PVC moulded flush door shutter ,28 to 30mm thick (stiles) with 2,4,or6 raised panel design with light colour matching to frame printed 4mm thick Moulded PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, supplying & foong in frame at site as per specification & drawing complete all as specified and directed.
28
-
-
S&F 1st quality PVC tower bolt 150 mm long complete all as specified and directed.
40
-
-
S&F 1st quality PVC door Handles 150 mm long complete all as specified and directed.
40
-
-
S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
15
-
-
S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame incl complete all as specified and directed.
82
-
-
M&L for cement concrete (1:2:4) B-0 using 12.50 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats, hold fasts etc., complete all as specified and directed.
1
-
-
S&F 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
40
-
-
S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed.
Note : Glass or wire cloth, etc. in panels or sash squares shall be
measured separately.
40
-
-
S&F 50 micron powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
50
-
-
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless
steel screws, all complete all as specified and directed.
25
-
-
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
25
-
-
Aluminium alloy anodised extruded fabricated type handle 150mm long complete all as specified and directed by Engineer-in-Charge
8
-
-
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm long fixing clips of sheet cast or and fixing with bolts extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge
4
-
-
Aluminium alloy, anodised, barrel tower bolt (bolt type) 200 mm long of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge
8
-
-
S&F steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed and skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 for four nos for each window including S&F following fittings welded to each window :- (a) Holdfasts 150mm long 12mm x 3mm made to shape – 04 Nos per window (b) Handle of Z Sec 20mmx25mm, 100mm long – 1 Nos of leaf, (c) MS tower bolt 150mm long - 02 Nos per leaf (d) ‘Z’ sec 20mm x 25mm, 100 long stopper – 01 Nos per leaf, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges – 01 Nos per leaf (f) MS pintal hinges of size 75mmx12mm – 02 Nos per leaf (g) Fabrication and fixing arrangement complete.
(h) Clear Glass 4 mm thick
(j) Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm
(k) Grill of 8mm sq. bar of length equal to the width of window @ 100mm c/c with cut space to accomodate the handle where directed/applicable.
48
-
-
M&L for Steel windows or ventilators, fixed type, with glazing bar all as specified and directed.
12
-
-
S&F stainless steel finished 202 Grade butt hinges 150mm long complete all as specified and directed.
48
-
-
S&F stainless steel 202 Grade finished 200mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and directed.
32
-
-
S&F Stainless Steel 202 Grade Finished curved Handles 200 mm long complete all as specified and directed.
32
-
-
S&F Stainless Steel 202 Grade Finished Sliding Door Bolt/Aldrop 16 x 300mm with square nuckle complete all as specified and directed.
16
-
-
S&F 300mm, mild steel ordinary rat tail rod (helical type) pattern springs including roller and roller plate complete all as specified and directed.
20
-
-
M&L 4mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane complete all as specified and directed.
20
-
-
M&L 5mm thick frosted glass in ventilators/ windows/ doors fixed in any metal frame work all as specified and directed.
20
-
-
S&F Stainless steel wire cloth, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
20
-
-
Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified.
60
-
-
M&L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
55
-
-
S&F Floor door stopper of 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
16
-
-
S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed.
36
-
-
Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed.
730
-
-
Demolition of mud phuska on roof any thickness including removal to the low lying area or outside the defence land complete all as specified and directed.
58.4
-
-
Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed.
730
-
-
M&L for PCC 1:3:6, type C-0 using 12.5mm graded crushed stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed.
32.85
-
-
M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
240
-
-
Providing and laying a single ply APP membrane system comprising of application of oil based bitumen primer coat @ 0.25 to 0.3 Kg/ Sqm of Sikabit T Primer and then applying a layer of polyester reinforced APP modified bitumen membrane Sika®Shield P35 PE IN 4mm (SikaBit T 140 MG), mineral finish to the primed substrate having a thickness of 4 mm (-0.2/+0.3 mm) (EN 1849-1), a cold flexibility of -2 °C (EN 1109), Tensile strength (L x T) of 600 x 400 N/5cm; water tightness of 10 Kpa as per EN 1928 (B); elongation at break: (L x T): 40 % ; Impact resistance of 700mm as per EN 12691. complete all as specified and directed.
Note : The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only.
770
-
-
S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe complete all as specified.
Note : Clamps will be measured and paid separately.
36
-
-
S&F PVC (SWR) bends of any radius for 110mm bore complete all as specified and directed.
16
-
-
S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
20
-
-
M&L for Plain cement concrete 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate as in roof kerbs or mud stops and benching, rounded or chamfered on edges, coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound complete all as specified and directed.
Note: WPC shall be paid separately
1
-
-
M&L for Reinforced Cement Concrete (RCC),B-1 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
1
-
-
M&L for Form work rough finished to soffits of suspended slabs such as roof slabs not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.
4.8
-
-
M&L for Form work rough finished to edges of concrete slabs exc 5 cm but not exc 10 cm thick complete all as specified and directed.
12.8
-
-
S&F TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed.
90.95
-
-
Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.
30
-
-
S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.
25
-
-
M&L for Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified and directed.
5
-
-
Taking up or down existing steel tubing and connections, 25mm bore complete all as specified and directed.
30
-
-
S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed.
25
-
-
Refixing 25mm bore GI steel water tubing medium grade fixed to walls complete all as specified and directed.
5
-
-
Taking up or down existing steel tubing and connections, 15 mm bore complete all as specified and directed.
20
-
-
S&F 20mm (OD 22.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required and suitable for fixing 15mm CP faucets/ fixtures complete all as specified and directed.
20
-
-
S&F 25mm (OD 27.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required complete all as specified and directed.
5
-
-
S&F Vitreous China squatting pan of "Orissa Pattem of size 580x440mm snow white colour ISI marked, fixed in repairs with integral footrest including taking down old unserviceable existing one complete all as specified and directed.
Note: The quoted rate shall include provision of "P" Cast Iron trap complete all as specified and directed.
16
-
-
S&F flushing cistern of Polymer/PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.
16
-
-
S&F vitreous china premium/1st quality wash basin (under counter oval shaped), snow white, size 560x470x190 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified.
Note : The items for counter will be measured and paid separately.
8
-
-
S&F in repair, Vitreous China Urinal 375 x 390 x 590 mm, Half stall type, snow white including fixing plug, Cast Iron Bracket duly painted/Erecting Stand including cutting,CP 32mm flush pipe etc all fittings complete all as specified and directed.
4
-
-
S&F 15mm WHB Mixer valve quarter turn for mixing hot and cold water of Brass Chromium Plated screwed down for 15mm dia pipe incl taking down complete all as specified and directed.
4
-
-
S&F 15mm wall mixer valve quarter turn for mixing hot and cold water of Brass Chromium Plated with wall flange/ cups screwed down for 15mm dia pipe incl taking down complete all as specified and directed
4
-
-
S&F 15 mm fancy type chromium plated quarter turn bib tap of long body with CP wall flange cast copper alloy with crutch or butterfly handles screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and directed.
20
-
-
S&F Pillar taps fency type long neck cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for 20mm bore of pipe all as specified and directed.
8
-
-
S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 20mm bore, fancy type, chromium plated with long shank and cup (Concealed type) including taking down old unserviceable existing one complete all as specified and directed.
8
-
-
S&F Angle valve quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.
23
-
-
S&F 450mm long braided hose/PVC connection with 15mm brass nuts complete all as specified and directed.
24
-
-
S&F concealed stop cock quarter turn 15mm bore cast copper alloy chromium plated fancy type with CP cup/ wall flange high pressure screwed for iron pipe and fixed, including taking down old unservicable existing one complete all as specified and directed.
8
-
-
600 x 450 mm size bevelled edge looking mirror 6mm thick of selected quality glass mounted on 6mm thick plywood and fixed with wooden plugs, CP screw, cup and washers including taking down old unserviceable existing one complete all as specified and directed.
8
-
-
S&F CP/matt finished peg set of size 300mm long and 30mm wide with 6 nos hooks of approved quality fixed with suitable screws complete all as specified and directed.
8
-
-
S&F in repairs soap dish CP plated of suitable size to accommodate soap complete all as specified and directed.
12
-
-
S&F overhead shower minimum 125mm square shaped with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed.
8
-
-
S&F stainless steel grating 125 x 125 mm size square shaped with self locking arangement for floor trap fixed in position complete all as specified and directed.
20
-
-
CP bottle traps 32mm size with 250mm and 175/190mm long wall connection pipes and wall flanges complete fixed in position complete all as specified and directed.
4
-
-
CP waste couplings 32mm size full thread with 80mm height complete fixed in position complete all as specified and directed.
10
-
-
S&F Self closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe complete all as specified and directed.
4
-
-
Urinal spreader for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed.
4
-
-
PVC(HDPE) SWR , 32 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, including bends/tee/elbow etc. laid in walls for connecting bottle traps complete all as specified and directed.
5
-
-
S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank and also dismental the tank etc complete all as specified and directed.
6
-
-
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20mm bore iron pipe or brass ferrule complete all as specified and as directed.
4
-
-
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed.
4
-
-
Taking down bends/floor traps/nahani traps/tee/branch pieces/cowls etc of in any position/size/description complete all as specified and directed.
33
-
-
S&F CI floor traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.
Note:The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2, complete all as specified and directed.
10
-
-
S&F CI floor traps with grating complete 75mm bore outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.
Note:The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2, complete all as specified and directed.
12
-
-
S&F CI nahni traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.
Note:The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2, complete all as specified and directed.
2
-
-
S&F Cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 100mm running bore in and including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.
18
-
-
S&F Cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 75mm running bore in and including stack clamps, nuts bolts etc and making necessary connections, complete all as specified and directed.
24
-
-
S&F Cast iron sand cast soil waste & vent pipe 100mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.
4
-
-
S&F Cast iron sand cast soil waste & vent pipe 75mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.
6
-
-
S&F CI bends 100mm bore pipes (any radius) diminishing pieces or tapers (larger bore measured) without oval access door complete all as complete all as specified and directed.
6
-
-
S&F CI bends 75mm bore pipes (any radius) diminishing pieces or tapers (larger bore measured) without oval access door complete all as complete all as specified and directed.
8
-
-
S&F Cl bend 100mm bore pipes (any radius) with oval access door of 100 mm bore fixed complete all as specified and directed.
12
-
-
S&F Cl bend 75mm bore pipes (any radius) with oval access door of 75 mm bore fixed complete all as specified and directed.
10
-
-
S&F Cast iron cowls for 100mm bore pipes complete all as specified and directed.
4
-
-
S&F CI double branch door Tee suitable for 100mm bore pipes ISI marked complete all as specified and directed.
6
-
-
S&F CI plain Tee suitable for 100mm bore pipes ISI marked complete all as specified and directed.
2
-
-
S&F CI door Y-Tee suitable for 100mm bore pipes ISI marked complete all as specified and directed.
2
-
-
S&F CI 'P' or 'S' trap 100mm bore with long arm ISI marked complete all as specified and directed.
4
-
-
S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop
valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.
25
-
-
Taking down of existing CI pipe 75mm or 100 mm bore from any position and refixing the same after cleaning & painting with 2 coats in any position including jointing in cement mortar complete all as specified and directed.
15
-
-
Taking down of existing CI fitting like bends/ Tee/ Double Tee/ Y-Tee etc of 100 mm bore from any position and refixing the same after cleaning & painting with 2 coats in any position including jointing in cement mortar complete all as specified and directed.
10
-
-
S&F Stack clamps for 100mm bore CI pipes made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
10
-
-
M & for water proofing treatment to sunken floor with the following course of treatment/ specification complete all as specified and directed : (i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation . (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant make as mentioned hereinafter and approved brand.Make of PU paint - Dek guard PU or equivalant make as mentioned hereinafter (vii) 2 Nos 40mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate
18
-
-
M&L for demolition of cement concrete unreinforced of any description and in any position complete all as specified and directed.
9
-
-
M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts and similar work complete all as specified and directed.
Note - Reinforcement and form work shall be measured and paid separately.
0.2
-
-
Form work to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal fair finished concrete surface complete all as specified and directed
3.2
-
-
M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in beam, cantilevers, bressummers, lintels over 1.5 m span and similar work complete all as specified and directed.
Note - Reinforcement and form work shall be measured and paid separately.
0.08
-
-
Form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves, for flat fair finished concrete surfaces complete all as specified and directed.
0.69
-
-
Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
16.69
-
-
M & L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc., finished even and smooth without using extra cement, complete all as specified and directed.
4
-
-
Preparation of new plastered or unplastered surfaces of walls etc., and M & L for applying two coat of distemper Oil Emulsion (OBD) over a coat of chalk whiting (as primer) complete all as specified and as directed.
4
-
-
M&L For Cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in mass concrete or filling backs of chowkats complete all as specified and as directed by Engineer in charge.
0.18
-
-
S& F Factory Made Steel Door Locker for Strong Room Confirming to FFL-2740 fedral Specification having following Requirment. (i) Outer size 80''x40'' and 72''x30'' ineer size (ii)Minimum Wt 700 Kg (iii) Lock System should be having combination not more then 3 to 4 digits with dual key lock (10-Levers) auto reversial lock. (iv) Over all thickness of door should be minimum 195mm (v) Door frame should be minimum thickness of 6mm and shutter should be of 10mm thick plate, Plate Should be Fire Resistant Cutter Proof/Drill Proof Preservative resistant yeast resistant (vi) 12 no of shooting bolt having 40mm dia Note:- (i) Hand Change locks, Hand change combination locks shall be designed to be combination changeable by hand without the use of special tools or changing the combination shall require a minimum amount of disassembly and reassembly. If the combination assembly is required to be removed for changing purposes, it shall be removable as a subassembly for accesibility of servicing outside the container. Removal of the lock back cover shall not require removal of more than two screws. The change assembly shall designed to prevent loss of components or improper re-assembly . Parts which be removed during combination changing shall be durable, reusable and not object to damage or excessive wear. The change assembly retainer shall be a design easily removed without special tools. Lock design shall not include components which may be inadvertently detached or lost during combination changing. Lock design shall minimize the possibility of improper orientation parts during reassembly. The combination setting shall be clearly identified. Simple, illustrated instruction shall be provided.
1
-
-
(ii) Key change combination locks. Key change combination locks shall be designed to be readily combination changeable by use of a key or special tool. Combination change shall not require removal or disassembly of the lock. Changing procedures shall not require the lock to have the bolt extended during changing and shall ensure the operator must know the current operating combination prior to changing the combination.
-
-
-
(iii) Bolt lockout. The lock shall have a mechanical relock device that will lock the bolt in the locked position if the lock cover plate is moved more than 0.10 inch (2.54 mm) at any point from its normal operating position.
-
-
-
(iv) Combinations. The lock combination shall input by dialing. The combination for opeing the lock shall not exceed four numbers. Each numbers shall be with in the range of 0 and 99, inclusive. The lock shall have as a minimum 1,000,000 operational combinations as defined in 6.3.
-
-
-
(v) Lock operation. The dial, spindle , bolt and all internal parts shall rate smoothly for the operating life of the lock, without the addition of anything but proper lubricants and without showing appreciable wear. Locks shall be tested for compliance with this requirement as specified in 4.5.2.1.
-
-
-
(vi) Lock bolt operation. All energy requried for lock bolt operation shall derived from mechanical operation of the lock dial by the operator.
-
-
-
(vii) Combination redial. Once the lock bolt has been extended to the locked positon, it shall not be possible to reopen the lock without completely redialing the lock combination. For purposes of this requirement. The locked position means the bolt has been fully extended.
-
-
-
(viii) Case access. When the lock is mounted to the test fixture and locked, The assembled lock case shall not allow insertion of any device to permit visual aspection of the interior of the lock.
-
-
-
(ix) Wheel torque. When applicable, dynamic wheel pack torque for the lock shall be 16 to 20 inch -ounces ( 11.30 to 14.12 newton - centimeters) to faciliates case of dialing. Torque shall remain within the specified torque range for the operating life of the lock, when tested in accordance with 4.5.2.1. lock design provide for adjustment of the torque to remain in the specified range. The dial and rotating internal parts shall be free wheeling.
-
-
-
(x) Temperature. The lock shall operate in a temperature range of -10 degreees F to 158 degrees F (-23.3 degrees C to 70 degrees C). At temperatures proceeding 158 degrees F ( 70 degrees C) +10, -0 degrees F, a thermal relock shall cause the lock to be deadbolted to prevent entry.
-
-
-
(xi) Humidity. The lock shall be designed to operate in a humidity range of 0 to 98 percent relative humidity for its operating life.
-
-
-
(xii) Vibration . Locks shall be subjected to type I enviromental vibration tests as specified in 4.5.2.4. Operation and security performance and shall remain within standards.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements