Military Engineer Services Tender

Dismantling wall and ceiling boards’ fibre, pulp, insulations etc or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and as directed.

M&L for second class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, not exc 3 sq. cm secured with nails or brads complete all as specified.

S & F 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed..

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces finished even and fair without using extra cement complete all specified and directed.

M&L Rendering 12 mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, finished Even and Smooth,without using extra cement complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil emultion distemper over a coat of primer complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete complete all as specified and directed.

Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bedding layer in cement mortar 1:6 complete all as specified and directed.

S & F in repair for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

M & L for Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for prepration of old surfaces of walls including brooming down or steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) and applying one coat of oil bound distemper complete all as specified and directed.

M&L for prepration of old surfaces of walls including brooming down or steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) and applying one coat of cement based paint applying complete all as specified and directed.

Taking down carefully existing point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated unsheathed, stranded copper conductor single core FRLS cable, drawn through and including non metallic rigid PVC concealed conduit 20mm dia (Minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and modular metal flush mounting box with white cover plate with frame, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point/fan/bell controlled by one switch SP one way.

All as per ser item No. 23 here in before but for one socket outlet 5 Amps on independent board complete all as specified

All as per ser item No. 23 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified

All as per ser item No. 23 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F in replacement for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified.

S&F in replacement Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed

S&F in replacement Switch piano, flush type single pole, one way 16 Amp complete all as specified and directed.

S&F in replacement Socket outlet 3 pin, 6A, flush type complete all as specified and directed.

S&F in replacement Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and directed

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed.

S&F in replacement Lamp holder insulated body with back plate suitable for batten fittings complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of necessary fixing arrangement in existing structure complete all as specified and directed.

Taking down carefully existing light fitting any type and refixing serviceable light fitting complete all as specified and directed.

Supply & fixing in replacement energy saving LED batten with polycarbonate diffuser comprising with aluminium housing , 4 ft, 20 W, 6500 K, power factor more than 0.95, IP - 20 class - l protection with inbuilt LED driver, luminous efficacy 100 lm/w, complete all as specified and directed.

S&F in replacement energy saving recess mounting deep drawn LED luminaire with clamp, 36W, 6500 K suitable for POP/ Grid ceiling of size 60 cm x 60 cm including necessary fixing arrangements/add altn of ceiling, having power factor more than 0.90, IP - 20 class - II protection with high efficiency LED electronic driver, luminous efficacy 100 lm/w complete all as specified and directed.

S&F in replacement energy saving pressure die-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficienty electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply, pre-wired and including mounting bracket, fixing clamps connection and testing complete all as specified.

Material and labour in repairs Submain wiring with PVC insulated unsheathed cable copper conductor FRLS two run of single core 6.0 Sqmm drawn through and including PVC rigid non metallic concealed conduit medium grade, ISI marked, size not less than 25mm with all fitings including earth continuity FRLS copper conductor 6.0 Sqmm PVC insulated with green insulation complete all as specified including taking down existing unserviceable/burnt submain. Notes : (i) Two run of cable & one run of cable alongwith PVC conduit combined together will be measured as on unit. (ii) The quoted rate includes making good disturbed surface of walls, floors to match with existing surface including any type of civil work.

S&F in reapirs/replacement Sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside complete all as specified.

M&L in replacement MCB SP 5 Amps to 32 Amps, 240V with rupturing capacity 10 KA, C Curve complete all as specified

M&L in replacement MCB SPN 32 Amps, 240V with rupturing capacity 10 KA, C Curve complete all as specified

M& L for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with top edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire 4mm dia connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire protected by 15 mm dia light grade GI pipe (IS 1239) upto 7.5 meter from electrode to earth terminal point Feeder Pillar box including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate GI light grade watering pipe of 20mm dia with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified & shown on drawings & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.complete all as specified and as directed.

M&L in repairs for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop Earthing etc. as required 4mm dia galvanised iron complete wire all as specified and directed.