Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 97,140Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_664474_2Bid Award Id
ViewTender No
GE/ASR-53/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Material and Labour for preparation of untreated steel/iron surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coats of sythetic enamel paint over and incl one coat of red oxide primer.
35
-
-
... More
Material and Labour for black bituminous paint with two coat of surfaces of any description wood, steel, iron, concrete ,brick, stone etc exceeding 10 cm in width or girth all as specified and directed.
2
-
-
... More
Material and Labour for PCC (1:3:6) type C2 using 40mm graded aggregate for foundation filling and mass concrete etc complete all as specified & directed.
0.1
-
-
... More
AC/MINOR/06/2024-25
Material and Labour for surface dressing n exc 15 cm deep soft/loose soil.
15
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil.
8
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
5
-
-
... More
Removing excavated material n.exc 50 m and depositing where directed
2
-
-
... More
Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete
1
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
3.5
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in column, pillars, piers, post and struts.
2
-
-
... More
Material and Labour for RCC (Nominal Mix) type B1, 1:2:4(20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
0.5
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
3.3
-
-
... More
Supply and Fixing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter
20
-
-
... More
Supply and Fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete.
15
-
-
... More
Supply and Fixing Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete.
25
-
-
... More
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.
35
-
-
... More
Material and Labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
500
-
-
... More
Material and Labour TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
100
-
-
... More
Ditto as item No 21 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
25
-
-
... More
Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
3.5
-
-
... More
Material and Labour 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor complete all as specified and directed.
35
-
-
... More
Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
4
-
-
... More
Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement)
35
-
-
... More
Material and Labour fpr Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement)
50
-
-
... More
Material and Labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement)
35
-
-
... More
Supply and Fixing pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.
5
-
-
... More
Material and labour for box type steel window, ERW hollow P-Section size 60mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes and PCC 1:2:4, type B-1 in hold fast block complete all as specified and directed as follows:-
(a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window
(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf
(c) MS tower bolt 150mm long - 02 Nos per leaf
(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf
(e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf
(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass wire mesh and painting shall be measured and paid sperately.
0.5
-
-
... More
Material and labour for box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD-06/07 dt 07.06.07 incuding cutting holes and making good complete all as specified. Note:- Sheet glass and painting shall be measured and paid separately.
0.5
-
-
... More
Supply and Fixing of Rolled mild steel in framed work (Fe 410W Gde-E-250, Quality A) as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
5
-
-
... More
Supply and Fixing Flush shutters in existing chowkhats, solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
4
-
-
... More
Material and Labour Galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples
2
-
-
... More
Supply and Fixing 100mm longe Butt Hinges, medium weight, cold rolled mild steel and fixed.
12
-
-
... More
Supply and Fixing 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed
12
-
-
... More
Supply and Fixing Aluminium handles, 150mm size cast type anodised complete all as specified and directed
12
-
-
... More
Supply and Fixing 200mm Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
2
-
-
... More
Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed
50
-
-
... More
Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified.
35
-
-
... More
All as per item No 40 above but on ceiling surface.
35
-
-
... More
Material and Labour for preparation of new wooden surface over 10cm width or girth and applying 2 coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified an directed.
15
-
-
... More
Material and Labour for preparation of new steel or iron surface over 10cm width or girth, not otherwise desribed and applying 2 coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified and directed.
15
-
-
... More
Material and Labour Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement completed all as specified and directed.
25
-
-
... More
Supply and Fixing (SWR) pipes of 110mm dia single socketed, in any length with rubber ring joints, laid in trnches or in floors complete all as specified and directed
20
-
-
... More
Supply and Fixing Factory made single extructed WPC but frame size 65x 125 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Chaege
5
-
-
... More
Supply and Fixing Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly)
3
-
-
... More
Supply and Fixing bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
5
-
-
... More
Supply and Fixing Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
4
-
-
... More
Supply and Fixing Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed in repair.
1
-
-
... More
Supply and Fixing Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 20mm dia fixed in repair.
1
-
-
... More
Supply and fixing plastic water closet seat coloured closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.
1
-
-
... More
Supply and Fixing for 15mm bore stop valves, cast copper alloy, concealed type, chromium plated with long shank and cup ,screwed down,handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
11
-
-
... More
Supply and fixing vitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC P or S trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 including taking down/dismantling old unserviceable WC complete all as specified. Note :- Flush pipe and flushing cistern to be measured and paid separately.
1
-
-
... More
Supply and fixing in replacement pillar tap long body 15mm dia cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without letters ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe Complete all as specified .
1
-
-
... More
Supply & fixing vitreous china wash down water closet pan (padestal pattern) white with flush pipe for low level flushing cistern including plastic water closet seat white with jet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed in repairs complete and directed.
1
-
-
... More
Supply and fixing in repairs bevelled edge mirror of size 600mmx450mm , 6mm thick of selected quality glass, mounted on 6mm thick commercial plywood including teak wood beading allround and fixed to wooden plug with chromium plated brass screw and cup washer and including clamps with wooden / plastic frame complete all as specified
2
-
-
... More
Supply and fixing white PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, push button type handle including pipe 32mm dia of PVC(Heavy duty) flush pipe including brackets and taking down/dismantling old unserviceable cistern completeall as specified.
1
-
-
... More
Supply and fixing viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length ilcluding taking out of old WHB & making necessary connections complete all as specified and directed
1
-
-
... More
Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
50
-
-
... More
Supply and Fixing Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed.
15
-
-
... More
Supply and Fixing PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm
5
-
-
... More
Supply and Fixing PVC (SWR) pipes 110mm dia bend any radius complete all as specified & directed.
3
-
-
... More
Material and Labour PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement.
2
-
-
... More
Supply and Fixing 110mm bore PVC (SWR) branch piece , single, equal fitted with oval access doors complete all as specified and directed.
2
-
-
... More
Supply and Fixing rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including Supply and Fixing 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed
1
-
-
... More
Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.
1
-
-
... More
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.
1
-
-
... More
Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
20
-
-
... More
Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
20
-
-
... More
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation, manholes,sewage line etc exc 10 sqm on plan and getting out in soft/loose soil complete all as specified.
10
-
-
... More
Returning,filling in,spreading,levelling,watering and well ramming in layers not exc 25cm thick each in soft/loose soil,complete all as specified and directed.
5
-
-
... More
Removing excavated material to a distance exc 250mtr b anut n.exc 500 mtr and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.
5
-
-
... More
Material and labour for brick work with sub-class 'B' bricks straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 including flush bricks straight or curved on plan exceeding 6 metres pointing as the work proceeds(Except internal surfaces of manholes and other surfaces where plaster is to be done) complete all as specified and directed.
3
-
-
... More
Supply ,laying in trenches, jointing and testing 150 mm bore salt glazed stoneware pipe grade 'A' drainpipe ISI marked all as specified & directed.( Excavation and earthwork shall be measured and paid for separately under appropriate items of Sch. 'A'.)
45
-
-
... More
Material and labour for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates)for bed of sewage lines of 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
40
-
-
... More
Material and labour for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates) as in foundation and mass concrete incl nessary form work if required for drain bed / foundation of manholes etc complete all as specified and directed.
1
-
-
... More
Material and labour for PCC 1:2:4 type B-0(using 12.5mm graded crushed stone aggregates) as in benching for manholes, bands, coping, bed plate etc including necessary form work, if any and finishing exposed surface even and smooth using extra cement complete all as specified and directed.
0.5
-
-
... More
Material and Labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:-
NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.
7
-
-
... More
All as per ser item No. 79 above but for One 3 pin 5 Amps socket outlet on independent board.
1
-
-
... More
All as per ser item No. 79 above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
1
-
-
... More
Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed
8
-
-
... More
Supply and Fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed
1
-
-
... More
Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed
1
-
-
... More
Supply and Fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed
1
-
-
... More
Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
7
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed
1
-
-
... More
Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete all as directed
2
-
-
... More
All as per ser item No. 88 above but for MCB SPN 32 Amps
1
-
-
... More
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed
2
-
-
... More
Supply and Fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light connecting up complete all as specified and directed.
4
-
-
... More
Supply and Fixing Wall mounted, indoor, HELIOS Mirror Light LED with aluminium die cast, suitable for and including 10 watt 6000K, WH LED light, prewired incl connecting up complete all as specified and directed.
1
-
-
... More
Supply & laying in trenches/drawn through pipes or in road crossing/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty, 1100 Volts grade of size 2 core 6 sqmm nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing, incl taking down old unsv one from site complete all as specified and directed
25
-
-
... More
Supply and Fixing storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, with incoloy heating element and PUF insulation, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections and making good to the disturbed surface in cement morter as required and testing complete all as directed
NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate
1
-
-
... More
AC/MINOR/07/2024-25
Material and Labour for surface dressing n exc 15 cm deep soft/loose soil.
15
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil.
8
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
5
-
-
... More
Removing excavated material n.exc 50 m and depositing where directed
2
-
-
... More
Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete
1
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
3.5
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in column, pillars, piers, post and struts.
2
-
-
... More
Material and Labour for RCC (Nominal Mix) type B1, 1:2:4(20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
0.5
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
3.3
-
-
... More
Supply and Fixing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter
20
-
-
... More
Supply and Fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete.
15
-
-
... More
Supply and Fixing Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete.
25
-
-
... More
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.
35
-
-
... More
Material and Labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
500
-
-
... More
Material and Labour TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
100
-
-
... More
Ditto as item No 109 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
25
-
-
... More
Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
3.5
-
-
... More
Material and Labour 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor complete all as specified and directed.
35
-
-
... More
Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
4
-
-
... More
Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement)
15
-
-
... More
Material and Labour fpr Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement)
25
-
-
... More
Material and Labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement)
10
-
-
... More
Supply and Fixing pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.
5
-
-
... More
Material and labour for box type steel window, ERW hollow P-Section size 60mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes and PCC 1:2:4, type B-1 in hold fast block complete all as specified and directed as follows:-
(a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window
(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf
(c) MS tower bolt 150mm long - 02 Nos per leaf
(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf
(e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf
(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass wire mesh and painting shall be measured and paid sperately.
0.5
-
-
... More
Material and labour for box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD-06/07 dt 07.06.07 incuding cutting holes and making good complete all as specified. Note:- Sheet glass and painting shall be measured and paid separately.
0.5
-
-
... More
Supply and Fixing of Rolled mild steel in framed work (Fe 410W Gde-E-250, Quality A) as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
5
-
-
... More
Supply and Fixing Flush shutters in existing chowkhats, solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
4
-
-
... More
Material and Labour Galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples
2
-
-
... More
Supply and Fixing 100mm longe Butt Hinges, medium weight, cold rolled mild steel and fixed.
4
-
-
... More
Supply and Fixing 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed
4
-
-
... More
Supply and Fixing Aluminium handles, 150mm size cast type anodised complete all as specified and directed
4
-
-
... More
Supply and Fixing 200mm Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
2
-
-
... More
Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed
25
-
-
... More
Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified.
15
-
-
... More
All as per item No 128 above but on ceiling surface.
10
-
-
... More
Material and Labour for preparation of new wooden surface over 10cm width or girth and applying 2 coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified an directed.
15
-
-
... More
Material and Labour for preparation of new steel or iron surface over 10cm width or girth, not otherwise desribed and applying 2 coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified and directed.
15
-
-
... More
Material and Labour Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement completed all as specified and directed.
15
-
-
... More
Supply and Fixing (SWR) pipes of 110mm dia single socketed, in any length with rubber ring joints, laid in trnches or in floors complete all as specified and directed
15
-
-
... More
Factory made single extructed WPC but frame size 65x 125 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Chaege
5
-
-
... More
Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly)
1.5
-
-
... More
Supply and Fixing bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
5
-
-
... More
Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
4
-
-
... More
Supply and Fixing Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed in repair.
1
-
-
... More
Supply and Fixing Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 20mm dia fixed in repair.
1
-
-
... More
Supply and fixing plastic water closet seat coloured closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.
1
-
-
... More
Supply and Fixing for 15mm bore stop valves, cast copper alloy, concealed type, chromium plated with long shank and cup ,screwed down,handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Supply and fixing vitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC P or S trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 including taking down/dismantling old unserviceable WC complete all as specified. Note :- Flush pipe and flushing cistern to be measured and paid separately.
1
-
-
... More
Supply and fixing in replacement pillar tap long body 15mm dia cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without letters ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe Complete all as specified .
1
-
-
... More
Supply & fixing vitreous china wash down water closet pan (padestal pattern) white with flush pipe for low level flushing cistern including plastic water closet seat white with jet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed in repairs complete and directed.
1
-
-
... More
Supply and fixing in repairs bevelled edge mirror of size 600mmx450mm , 6mm thick of selected quality glass, mounted on 6mm thick commercial plywood including teak wood beading allround and fixed to wooden plug with chromium plated brass screw and cup washer and including clamps with wooden / plastic frame complete all as specified
2
-
-
... More
Supply and fixing white PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, push button type handle including pipe 32mm dia of PVC(Heavy duty) flush pipe including brackets and taking down/dismantling old unserviceable cistern completeall as specified.
1
-
-
... More
Supply and fix viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length ilcluding taking out of old WHB & making necessary connections complete all as specified and directed
1
-
-
... More
Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
25
-
-
... More
Supply and Fixing Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed.
15
-
-
... More
PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm
5
-
-
... More
Supply and Fixing PVC (SWR) pipes 110mm dia bend any radius complete all as specified & directed.
3
-
-
... More
Material and Labour PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement.
2
-
-
... More
Supply and Fixing 110mm bore PVC (SWR) branch piece , single, equal fitted with oval access doors complete all as specified and directed.
2
-
-
... More
Supply and Fixing rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including Supply and Fixing 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed
1
-
-
... More
Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.
1
-
-
... More
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.
1
-
-
... More
Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
15
-
-
... More
Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
10
-
-
... More
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation, manholes,sewage line etc exc 10 sqm on plan and getting out in soft/loose soil complete all as specified.
5
-
-
... More
Returning,filling in,spreading,levelling,watering and well ramming in layers not exc 25cm thick each in soft/loose soil,complete all as specified and directed.
2
-
-
... More
Removing excavated material to a distance exc 250mtr b anut n.exc 500 mtr and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.
3
-
-
... More
Material and labour for brick work with sub-class 'B' bricks straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 including flush bricks straight or curved on plan exceeding 6 metres pointing as the work proceeds(Except internal surfaces of manholes and other surfaces where plaster is to be done) complete all as specified and directed.
1
-
-
... More
Supply ,laying in trenches, jointing and testing 150 mm bore salt glazed stoneware pipe grade 'A' drainpipe ISI marked all as specified & directed.( Excavation and earthwork shall be measured and paid for separately under appropriate items of Sch. 'A'.)
15
-
-
... More
Material and labour for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates)for bed of sewage lines of 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
13
-
-
... More
Material and labour for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates) as in foundation and mass concrete incl nessary form work if required for drain bed / foundation of manholes etc complete all as specified and directed.
0.5
-
-
... More
Material and Labour for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m
0.5
-
-
... More
Material and Labour for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing
work, complete
5
-
-
... More
Material and labour for PCC 1:2:4 type B-0(using 12.5mm graded crushed stone aggregates) as in benching for manholes, bands, coping, bed plate etc including necessary form work, if any and finishing exposed surface even and smooth using extra cement complete all as specified and directed.
0.25
-
-
... More
Material and Labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:-
NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.
4
-
-
... More
All as per ser item No. 169 above but for One 3 pin 5 Amps socket outlet on independent board.
1
-
-
... More
All as per ser item No. 169 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
1
-
-
... More
Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed
5
-
-
... More
Supply and Fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed
1
-
-
... More
Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed
1
-
-
... More
Supply and Fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed
1
-
-
... More
Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
4
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed
1
-
-
... More
Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete all as directed
2
-
-
... More
All as per ser item No. 178 above but for MCB SPN 32 Amps
1
-
-
... More
Supply and fixing sub main wiring with 2 runs of 1.5 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 1.5 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site complete all as directed
NOTE: Two runs of 1.5 sqmm copper cable and one run of 1.5 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
20
-
-
... More
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed
Make: Havells or equivalent in Orient/Crompton
1
-
-
... More
Supply and Fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light connecting up complete all as specified and directed.
1
-
-
... More
Supply and Fixing Wall mounted, indoor, HELIOS Mirror Light LED with aluminium die cast, suitable for and including 10 watt 6000K, WH LED light, prewired incl connecting up complete all as specified and directed.
2
-
-
... More
Supply and Fixing storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, with incoloy heating element and PUF insulation, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections and making good to the disturbed surface in cement morter as required and testing complete all as directed
NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate
1
-
-
... More
AC/MINOR/08/2024-25
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil
21
-
-
... More
PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified and directed.
3
-
-
... More
Removing excavated material (soil) exc 250 m but n.exc 500 m and depositing where directed.
3
-
-
... More
Supply and Fixing mild steel Gde Fe-410-W as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc.
1650
-
-
... More
Supply and Fixing for mild steel work as in post and struts including embeding in concrete and screwing etc ,wind tie of roof including securing with bolts complete.
1140
-
-
... More
Supply and Fixing for mild steel flate iron work all as specified MS Plates including drilling holews, notching for screwed, rebating or welding comolete.
50
-
-
... More
Supply and Fixing for mild Secrew bolt ( Machine made ) with hexagonal or square head at one end and screwed the other , or screwed both ends each secrewed end to be fitted with washer and one hexagonal or square nuts. exc 10 but n exc 15 cm long.
5
-
-
... More
Supply and Fixing prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering incudingl ridge fixed with self tapping screws / L type or J type hook as specified
309
-
-
... More
Supply and Fixing 0.50 mm plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings length and girth as fixed) with grade of zinc coating 275.
10
-
-
... More
Material and Labour preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide.
50
-
-
... More
AC/REV-02/2024-25
Material and Labour for surface dressing n exc 15 cm deep soft/loose soil.
40
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil.
10
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
7
-
-
... More
Removing excavated material n.exc 50 m and depositing where directed
3
-
-
... More
Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete
1.5
-
-
... More
Material and Labour RCC (Nominal Mix) type B1 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
4.5
-
-
... More
Material and Labour RCC(Nominal Mix) type B1 1:2:4 (20mm graded aggregate) in column, pillars, piers, post and struts.
2
-
-
... More
Material and Labour for RCC (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
0.5
-
-
... More
Material and Labour RCC(Nominal Mix) type B1 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
5
-
-
... More
Supply and Fixing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter
60
-
-
... More
Supply and Fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete.
22
-
-
... More
Supply and Fixing Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete.
30
-
-
... More
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.
22
-
-
... More
Material and Labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
600
-
-
... More
Material and Labour TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
250
-
-
... More
Ditto as item No 209 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
150
-
-
... More
Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
16
-
-
... More
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 complete all as specified and directed.
36
-
-
... More
Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement)
30
-
-
... More
Material and Labour fpr Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement)
60
-
-
... More
Material and Labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement)
25
-
-
... More
Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered/old decorated surfaces complete all as specified and directed.
30
-
-
... More
Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces complete all as specified and directed.
25
-
-
... More
Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed
60
-
-
... More
Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof padding Finishing fair and even.complete all as specified.
1.5
-
-
... More
Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. Repair all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with ShaliSBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions.
30
-
-
... More
Material and Labour Slightly damp the surface, avoid standing Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio 1:1 and apply @ 400gm/sqm (as per surface condition). Allow the primer to touch dry in tacky position in open atmosphere. Thenafter apply 1st coat of Tarfelt LM (Liiquid membrane) having elongation 200% confirming to ASTM-C-412 & bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm confirmin to ASTM-C-412 with no diluation of water on primed surface is still tacky with consumption of 0.7 kg/sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10-12Hrs. Apply 2nd coat of cured first coat with consumption @ 0.7kg/sqm in opposite dierction of first coat by Brush or roller. Sprinkle sand @ 200Gm P/Sqm while the coating is stick to facilitate plastering for protection screed. Allow it to dry for 10-12 hrs . Apply 3rd coat if required as per site reqirement. Providing & Laying minimum 50mm PCC in slope with welded wire mesh 1.5 mm as reinforcement and PCC admixed with Shallplast LW+ of STP Ltd (Integral Waterproofing compound) @200 ml per bag of cement on horizontal surface for mechanical protection over a separation layer of ShallGeo Textile 120 gsm in client Scope.
30
-
-
... More
Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
3
-
-
... More
Material and Labour 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor complete all as specified and directed.
30
-
-
... More
Material and Labour Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement completed all as specified and directed.
17
-
-
... More
Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.
30
-
-
... More
Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
90
-
-
... More
Supply and Fixing vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.
2
-
-
... More
Supply and Fixing of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.
1
-
-
... More
Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed.
3
-
-
... More
Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) Make-Prayag/Shakti
1
-
-
... More
Supply and Fixing PVC Jet spray suitable for EWC.
1
-
-
... More
Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain.
1
-
-
... More
Supply and Fixing in Repair vitreous China wash basin white,flat back size550x400mm including CP waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore of fancy type complete.
1
-
-
... More
Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail.
3
-
-
... More
Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm.
4
-
-
... More
Supply and Fixing Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes.
3
-
-
... More
Supply and Fixing in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
4
-
-
... More
Supply and Fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed
6
-
-
... More
Supply and Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed.
4
-
-
... More
Supply and Fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick commercial plywood incl all around teak wood beading and fixed to wall complete all as specified and directed.
1
-
-
... More
Supply and Fixing in rfepairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.
3
-
-
... More
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.
3
-
-
... More
Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
30
-
-
... More
Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
30
-
-
... More
Supply and Fixing in repair PVC (SWR) pipe 75mm dia fixed in wall/floor.
10
-
-
... More
PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors
25
-
-
... More
Supply and Fixing in repair 75mm PVC (SWR) bends any radius.
3
-
-
... More
Supply and Fixing in repair 75mm PVC floor trap complete all as specified.
4
-
-
... More
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
3
-
-
... More
Supply and Fixing Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and frawing.
30
-
-
... More
Supply and Fixing 28 to 30 mm thick (Rajshri brand) factory made solid PVC moulded Door shutter with 2,3 or6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing.
8
-
-
... More
Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed.
12
-
-
... More
Supply and Fixing 150mm long Aluminium handles, cast type anodised.
12
-
-
... More
Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.
18
-
-
... More
Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore.
1
-
-
... More
Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;
20
-
-
... More
Cutting into existing manholes for connecting 150 dia new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
1
-
-
... More
Material and Labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:-
NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.
4
-
-
... More
All as per ser item No. 258 above but for One 3 pin 5 Amps socket outlet on independent board.
1
-
-
... More
All as per ser item No. 258 above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
1
-
-
... More
Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed
5
-
-
... More
Supply and Fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed
1
-
-
... More
Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed
1
-
-
... More
Supply and Fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed
1
-
-
... More
Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
5
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed
1
-
-
... More
Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete all as directed
2
-
-
... More
All as per ser item No. 267 above but for MCB SPN 32 Amps
1
-
-
... More
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed
Make: Havells or equivalent in Orient/Crompton
1
-
-
... More
Supply and Fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light connecting up complete all as specified and directed.
3
-
-
... More
Supply and Fixing Wall mounted, indoor, HELIOS Mirror Light LED with aluminium die cast, suitable for and including 10 watt 6000K, WH LED light, prewired incl connecting up complete all as specified and directed.
1
-
-
... More
Supply & laying in trenches/drawn through pipes or in road crossing/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty, 1100 Volts grade of size 2 core 6 sqmm nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing, incl taking down old unsv one from site complete all as specified and directed
20
-
-
... More
Supply and Fixing of CPVC pipes of outer dia 20mm, SDR 11 & Plain CPVC SDR 11 fittings (such as elbow, socket, union, male/female threaded socket, etc.) conforming to IS: 15778, having pressure bearing capacity @ 23°C is 28.12kg/cm² & at @ 82°C 7.03kg/cm² complete fixed on walls/ceiling or laying in floors complete all as specified.
40
-
-
... More
Supply and Fixing stop valves of bore dia 20mm, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/CPCV pipe or for unions and fixed complete all as specified and directed
8
-
-
... More
Supply and Fixing Bib taps, of bore dia 20mm, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified an directed
4
-
-
... More
Supply and Fixing storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, with incoloy heating element and PUF insulation, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections and making good to the disturbed surface in cement morter as required and testing complete all as directed
NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate
1
-
-
... More
AC/REV-04/2024-25
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil.
8
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
3
-
-
... More
Removing excavated material n.exc 50 m and depositing where directed
5
-
-
... More
Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete
1
-
-
... More
Material and Labour RCC (Design Mix) M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
4.5
-
-
... More
Material and Labour RCC(Design Mix) M-25 (20mm graded aggregate) in column, pillars, piers, post and struts.
3
-
-
... More
Material and Labour for RCC (Design Mix) M-25 (20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
0.5
-
-
... More
Material and Labour RCC(Design Mix) M-25 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and laying 10mm thick plaster in CM 1:3 over concrete surface when concrete is green finishing the concrete surface even and smooth without using extra cemet.
4.5
-
-
... More
Supply and Fixing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter
10
-
-
... More
Supply and Fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete.
25
-
-
... More
Supply and Fixing Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete.
30
-
-
... More
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.
20
-
-
... More
Material and Labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
400
-
-
... More
Material and Labour TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
150
-
-
... More
Ditto as item No 290 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
80
-
-
... More
Dismantling Brick tiles/PCC tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed by Engineer-in-Charge.
60
-
-
... More
Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed by Engineer-in-Charge.
3
-
-
... More
Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed by Engineer-in-Charge.
90
-
-
... More
Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and as directed by Engineer-in-Charge.
90
-
-
... More
Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-Charge.
30
-
-
... More
All as per Srl Item No. 296 here-in-before but except brick tiles/PCC tiles. Note:-Old serviceable tiles shall be reused.
60
-
-
... More
Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
15
-
-
... More
Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement)
55
-
-
... More
Material and Labour Providing and applying plaster of paris putty of 1 mm thickness over plastered surface toprepare the surface even and smooth.
55
-
-
... More
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
55
-
-
... More
Material and Labour fpr Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement)
60
-
-
... More
Material and Labour Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces complete all as specified and directed.
60
-
-
... More
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator of any size (as required) fixed type or openable type made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Net opening will be measured for payment purpose.
3.4
-
-
... More
Supply and Fixing 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required
3
-
-
... More
Material & Labour for providing and fixing toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required complete all as directed.
4
-
-
... More
Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej
2
-
-
... More
Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm.
2
-
-
... More
Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.
2
-
-
... More
Supply and Fixing 450mm long Brass handles, cast type complete all as directed.
4
-
-
... More
Material and Labour for frosted to toughned glass of any thickness complete all as directed
2
-
-
... More
Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
3
-
-
... More
Material and Labour 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor complete all as specified and directed.
30
-
-
... More
Material and Labour Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement completed all as specified and directed.
17
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.
25
-
-
... More
Material and Labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed.
60
-
-
... More
Material and Labour Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately.
30
-
-
... More
Material and Labour Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
30
-
-
... More
Material and labour preparation of newly surface of Ceiling and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified.
30
-
-
... More
Supply and Fixing in repair of One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore complete all as specified and directed.
1
-
-
... More
Supply and Fixing in repair PVC Jet spray suitable for EWC.
1
-
-
... More
Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain.
1
-
-
... More
Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail.
2
-
-
... More
Supply and Fixing Sheet glass corner shelf assembly consisting of three nos 5.5mm to 8mm thick sheet glass corner shelf with chromium plated bracket guard and railing.
3
-
-
... More
Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm.
6
-
-
... More
Supply and Fixing Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes.
1
-
-
... More
S/F 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
2
-
-
... More
S/F 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
4
-
-
... More
Supply and Fixing of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed
2
-
-
... More
Supply and Fixing in repair WHB mixture Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.
1
-
-
... More
Supply and Fixing in repair PVC waste pipe 32mm dia fixed to WHB/Urinals.
1
-
-
... More
Supply and Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed.
2
-
-
... More
Supply and Fixing Vanity of size 820x450mm with vitreous China wash basin white,with suitable size including CP waste coupling 32mm bore,waste PVC pipe complete all as specified and directed.
1
-
-
... More
Supply and Fixing in repair 820mmx1200mm bevelled edge mirror of selected quality glass,mounted on CP stud including drilling cutting and fixed to wall complete all as specified and directed.
1
-
-
... More
Supply and Fixing in rfepairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.
1
-
-
... More
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.
1
-
-
... More
Supply and Fixing Vitrous china white (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
1
-
-
... More
Taking up or down 15mm bore steel tubing and connections , including cleaning for re-fixing or removal of store.
20
-
-
... More
Taking up or down 20mm bore steel tubing and connections , including cleaning for re-fixing or removal of store.
10
-
-
... More
Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
20
-
-
... More
Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
10
-
-
... More
Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore.
1
-
-
... More
Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge
10
-
-
... More
Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge
5
-
-
... More
Supply and Fixing 110mm bore PVC (SWR) bends any radius .
4
-
-
... More
Supply and Fixing 110mm PVC (SWR) junction single, (Single T) equal or unequal
2
-
-
... More
Supply and Fixing in repair 100mm bore PVC (SWR) gully trap, plain with grating including jointing with solvent cement
2
-
-
... More
Material and Labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:-
NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.
6
-
-
... More
All as per ser item No. 348 above but for One 3 pin 5 Amps socket outlet on independent board.
2
-
-
... More
All as per ser item No. 348 above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
1
-
-
... More
Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed
8
-
-
... More
Supply and Fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed
1
-
-
... More
Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed
2
-
-
... More
Supply and Fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed
1
-
-
... More
Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
6
-
-
... More
Supply and Fixing ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator, remote & accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan complete all as specified and directed
2
-
-
... More
Supply and Fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light connecting up complete all as specified and directed.
4
-
-
... More
Supply and fixing sub main wiring with 2 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site complete all as directed
NOTE: Two runs of 6.0sqmm copper cable and one run of 6.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
14
-
-
... More
Material and Labour for distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 6 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, of Make: Havells or equivalent in Indoasian/L&T/Legrand, including making good to disturbe surface wall complete all as directed
NOTE: (i) MCB DB & MCBs should be of same make as mentioned above., (ii) Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.
1
-
-
... More
Supply and Fixing MCCB triple pole and neutral (four pole) 125 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections including dismantling of old UNSV one of any type/size from site complete all as directed
Make: Havells or equivalent in Indoasian/L&T/Legrand
1
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 8 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, making good to disturbe surface wall complete all as directed
1
-
-
... More
Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete all as directed
5
-
-
... More
All as per ser item No. 362 above but for MCB SPN 32 Amps
1
-
-
... More
AC/REV/05/2024-25
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil
21
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil.
10
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
6
-
-
... More
PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified and directed.
4
-
-
... More
Removing excavated material (soil) exc 250 m but n.exc 500 m and depositing where directed.
5
-
-
... More
Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
4
-
-
... More
Material and Labour 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor complete all as specified and directed.
70
-
-
... More
Material and Labour Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement completed all as specified and directed.
35
-
-
... More
Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified
70
-
-
... More
All as per srl Item No 372 here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.
10
-
-
... More
Supply and Fixing mild steel Gde Fe-410-W as in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc.
1850
-
-
... More
Supply and Fixing for mild steel work as in post and struts including embeding in concrete and screwing etc ,wind tie of roof including securing with bolts complete.
1350
-
-
... More
Supply and Fixing for mild steel flate iron work all as specified MS Plates including drilling holews, notching for screwed, rebating or welding comolete.
50
-
-
... More
Supply and Fixing for mild Secrew bolt ( Machine made ) with hexagonal or square head at one end and screwed the other , or screwed both ends each secrewed end to be fitted with washer and one hexagonal or square nuts. exc 10 but n exc 15 cm long.
5
-
-
... More
Supply and Fixing prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering incudingl ridge fixed with self tapping screws / L type or J type hook as specified
100
-
-
... More
Supply and Fixing 0.50 mm plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings length and girth as fixed) with grade of zinc coating 275.
6
-
-
... More
Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
15
-
-
... More
Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement)
99
-
-
... More
Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)
74
-
-
... More
Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron)
12
-
-
... More
Supply and Fixing Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .(Min. thickness of powder coating 50 micron)
4
-
-
... More
Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed
12
-
-
... More
Supply and Fixing in repair door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed
1
-
-
... More
Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej
1
-
-
... More
Supply and Fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Material and Labour for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening .
70
-
-
... More
Supply and Fixing in repair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc.
10
-
-
... More
Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered/old decorated surfaces complete all as specified and directed.
50
-
-
... More
Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed.
15
-
-
... More
Material and Labour preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide.
50
-
-
... More
Material and Labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:-
NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.
8
-
-
... More
All as per ser item No. 393 above but for One 3 pin 5 Amps socket outlet on independent board.
2
-
-
... More
Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed
10
-
-
... More
Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed
2
-
-
... More
Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
8
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed
1
-
-
... More
Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete all as directed
2
-
-
... More
All as per ser item No. 399 above but for MCB SPN 32 Amps
1
-
-
... More
Supply and Fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light connecting up complete all as specified and directed.
8
-
-
... More
Supply & laying in trenches/drawn through pipes or in road crossing/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty, 1100 Volts grade of size 2 core 16 sqmm nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing, incl taking down old unsv one from site complete all as specified and directed
NOTE: Excavation, earthwork, brick protection & cable protection etc. will be measured and paid separately under relevant items of this schedule.
65
-
-
... More
Excavating in trenches not exc 1.5 meter wide and not exc 1.5 meter in depth for laying cables and getting out in soft/loose soil and in road cutting all as specified and as directed
14
-
-
... More
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil all as specified and directed
13
-
-
... More
Removing excavated material/surplus soil not exc 50 meters and depositing where directed at a level not exceeding 1.5 meter above starting point
1
-
-
... More
Supply & laying double wall corrugated (DWC) high density poly ethylene (HDPE) of size 40mm dia including all necessary fittings, PN-4 rating, pressure 6 Kgf/cm², conforming to IS-16205 (Part-24) with high ring stiffness & cursh resistance capacity, etc., laid in trench for protection of submersible flat cable complete all as directed.
55
-
-
... More
Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed.
1
-
-
... More
AC/REV/03/2024-25
Material and Labour for surface dressing n exc 15 cm deep soft/loose soil.
120
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil.
26
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
12
-
-
... More
Removing excavated material n.exc 50 m and depositing where directed
14
-
-
... More
Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete
6
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
13
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in column, pillars, piers, post and struts.
8
-
-
... More
Material and Labour for RCC (Nominal Mix) type B1, 1:2:4(20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
2
-
-
... More
Material and Labour RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
15
-
-
... More
Supply and Fixing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter
45
-
-
... More
Supply and Fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete.
40
-
-
... More
Supply and Fixing Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete.
135
-
-
... More
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.
46
-
-
... More
Material and Labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
1300
-
-
... More
Material and Labour TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
700
-
-
... More
Ditto as item No 422 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
160
-
-
... More
Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
9
-
-
... More
Material and Labour 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor complete all as specified and directed.
90
-
-
... More
Material and Labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
30
-
-
... More
Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement)
140
-
-
... More
Material and Labour fpr Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement)
150
-
-
... More
Material and Labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement)
90
-
-
... More
Material and labour for Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:-
(a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window
(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf
(c) MS tower bolt 150mm long - 02 Nos per leaf
(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf
(e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf
(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty
(i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leaf
Note :- Including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately.
7
-
-
... More
Supply and Fixing of Rolled mild steel in framed work (Fe 410W Gde-E-250, Quality A) as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
200
-
-
... More
Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed
150
-
-
... More
Material and labour preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified.
140
-
-
... More
All as per item No 433 above but on ceiling surface.
90
-
-
... More
Material and Labour for preparation of new steel or iron surface over 10cm width or girth, not otherwise desribed and applying 2 coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified and directed.
25
-
-
... More
Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified
90
-
-
... More
All as per srl Item No 436 here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.
7
-
-
... More
Material and Labour Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement completed all as specified and directed.
32
-
-
... More
Material and Labour for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:-
NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates.
(ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.
9
-
-
... More
All as per ser item No. 439 above but for One 3 pin 5 Amps socket outlet on independent board.
2
-
-
... More
Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed
11
-
-
... More
Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed
2
-
-
... More
Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
9
-
-
... More
Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed
1
-
-
... More
Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete all as directed
2
-
-
... More
All as per ser item No. 445 above but for MCB SPN 32 Amps
1
-
-
... More
Supply and fixing sub main wiring with 2 runs of 1.5 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 1.5 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site complete all as directed
NOTE: Two runs of 1.5 sqmm copper cable and one run of 1.5 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
25
-
-
... More
Supply and Fixing ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator, remote & accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan complete all as specified and directed
1
-
-
... More
Supply and Fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI 80, PF95%, THD10%, Lumen2100 lm including LED tube light connecting up complete all as specified and directed.
8
-
-
... More
Supply & laying in trenches/drawn through pipes or in road crossing/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty, 1100 Volts grade of size 2 core 6 sqmm nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing, incl taking down old unsv one from site complete all as specified and directed
40
-
-
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements