Military Engineer Services Tender

Taking down GI pipe 20 mm bore medium grade and fitting and supply and fixing GI tubing medium grade 20 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and as directed by Engineer-in-Charge. (Note : Excavation and earthwork shall be measured and paid for separetely under approprite item).

All as per item ser No 4 above here in before but 25 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per item ser No 4 above here in before but 40 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per item ser No 4 above here in before but 50 mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacment of gun metal globe or gate valve with iron wheel head screwed both ends suitable for galvanised pipe 20 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per item ser No 08 above here in before but 25 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per item ser No 08 above here in before but 40 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per item ser No 08 above here in before but 50 mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking down old unserviceable GI/CI pipe 80 mm bore and supply, laying, jointing and testing new Ductile iron pipe (K=7) 80 mm bore centrifugally cast class LA confirming to IS - 1536 spigot and socketed ends in any length laid in trenches complete all as specified and as directed by Engineer-in-Charge. (Note : Excavation, earth work, CI fitting and new run lead joint shall be measured and paid for separetely under appropriate item of Sch 'A')

All as per item No 12 above here in before but DI (K-7)100 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per item No 12 above here in before but DI (K-7) 150 mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F GI coloumn pipe 100mm dia heavy duty 'C' class with flanged ends drill 3 meter long including joining to exising main pipe line complete all as specified and as directed by Engineer-in-Charge. (Note : The cost of nuts bolts washers packing materials and pressure gauge shall be deemed to included in unit rate quoted by the contracror).

M&L for lead joint suitable for CI pipe 80 mm bore complete all as specified and as directed by Engineer-in-Charge.

M&L for lead joint suitable for CI pipe 100 mm bore complete all as specified and as directed by Engineer-in-Charge.

M&L for lead joint suitable for CI pipe 150 mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement CI/DI fitting such as bends, tapers, (any type, radius and angle) tapers any type,(straight, bend, increasing,decreasing or double socket etc.)Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs tee pieces, single branch for spigot and socket and flanged pipe up to 150 mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacment cast iron sluice valve 80 mm bore (PN-1) with flanged ends, ISI mark with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc including taking out old unsv sluice valve complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No 20 here in before but 100 mm dia (PN-1) complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 20 above here in before but 150 mm bore (PN-1) complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Submersible pump set, Electric driven having dischage 1000 LPM at 84 mtr head including suitable capacity of electric motor not less than 30 HP suitable for operation of 415 volts 50 C/S AC supply complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Self Priming Mud centrifugal monoblock sewage motor pump 3 phase 415 volt 50 HZ of capacity 10 HP 1500 RPM with discharge 210 to 840 LPM at 10 to 23 Mtr head including fully automatic star delta startor and fittingsGI heavy duty 100mm bore delevery pipe line including rubber packing sheet nut, bolt, GI/CI bends and fitting etc complete all as specified and as directed by Engineer-in-Charge.

Taking down old u/s bleaching dozing pump along with all accessories and Supply and install, connecing, testing and commissioning of High Pressuure single Head adjustable "DECLIBAC" Dosing system Model No VST 1005 and VST 1006 of the following specification. Adjustble High Pressure 5 Kg/Sq. cm. power input 230V, 50 Hz, 40 SPM 1/30 fractional Horsepower, Max output 10 Ltr with mandatory accessories like lead Tubing, connecting ferrules, check valves, etc (A) Preparation tank Model No VST 1005 of net capacity 100 Ltr, FRP dosing tank dia 650 x net Height 375 + conical 300. Gross height with stand 1000 mm consisting of : (i) Water inlet line (ii) Outlet with stainer (iii) Drain (iv) overflow (v) conical bottom for sludge depositing (vi) Pot hole with cover (vii) level gauge (viii) Agitator 120 watt 900 RPM single phase flange mounted motor with plastic shaft and impeller. (B) Service Tank Model No VST 1006 dia 480 x height 575 net capacity 100 Ltr consisting of (i) water inlet line (ii) Dosing pump inlet arrangement (iii) Drain (iv) Overflow (v) Level Gauge (vi) inspection port (vii) Agitator 120 watt 900 RPM Single Phase flange mounted moto with plastic shaft and impeller (ix) provision of mounting Pump on Lid/wall

Material labour and services for taking sample water in sterlised bottles from various borewells for Analysis of water for the following parameters and obtaining sample test report from Govt Recognized Laboratories: (i) Physio Chemical Analysis of Water ( Colour , odour , pH Total solids, Dissolved Solids, Permanent hardness, temporary Hardness, Ammonia feree and salinbe, Ammonia Albuminoidal, Nitrites, Nitreates, Oxygen absorption at 15 Min, Iron , Fluoride) (ii) Microbiological Analysis ( Totral Choliforms , Eschirrchea Coli) Note : 1. A certificate of approval / certification of Lab by Goivt Of India / State Govt shall be submitted by the contractor to the deptt. 2. Sample shall be submitted to the Labortory within 24 Hrs of collection of sample

Supply of Chlorine test kit with coloured sample complete with all testing fitments and OT solution in Rexene finish Box complete all as specified and as directed by Engineer-in-Charge.

M & L for cleaning & flushing of RCC overhead reservoir of capacity 100000 gallons at 60 feet staging removing of silt and sludge deposited inside the tank to a distance not exceeding 50 Mtr from GL, cleaniang entire internal surface of tank with bleaching powder and flushing with water complete all as specified and marking Date of cleaning with enamelled paint complete all as specified and as directed by Engineer-in-Charge. (Note : Cost of scaffolding upto height of 60 feet shall be deemed to be including in the rate quoted by the contractor)

All as per item No 28 here in before but Capacity 75000 gallon at 60 feet staging complete all as specified and as directed by Engineer-in-Charge.

All as per item No 28 here in before but Capacity 50000 gallon at 60 feet staging complete all as specified and as directed by Engineer-in-Charge.

M & L for disconnecting electric connection and pipe connection and taking out submersible pump & motor of capacity 25 to 30 HP from bore well and taking to workshop for repair and removal of burnt winding wire from motor and rewinding with new PVC insulated copper winding wire for submersible motor of same guage and weight to existing including replacement of , Motor bush, thrust plate coupling complete with key and alignment of motor stater's slote reassembnling the motor with pump and lowering it into bore well making it functional and testing complete all as specified and as directed by Engineer-in-Charge.

All as per item 31 above here in before but capacity 35-40 HP complete all as specified and as directed by Engineer-in-Charge.

All as per item No 31 above but for non clog sewage pump motor capacity 7.5 HP including replacement of ball bearings and alignment of motor starter stator complete all as specified and as directed by Engineer-in-Charge.

All as per item No 31 here in before but for sewage pump motor of capacity 10 HP including replacement of ball bearings and alignment of motor starter and slote complete all as specified and as directed by Engineer-in-Charge.

All as per item No 31 here in before but for openwell submersible pump motor of capacity 2 to 5 HP including replacement of ball bearings and alignment of motor starter and slote complete all as specified and as directed by Engineer-in-Charge.

Repair to existing valve pits of internal dimensions 90cm x 90 cm x 90 cm making good disturbed/dismantled brick work in cement mortar (1:4) plastering surfaces in CM 1:6, 15mm thick and PCC coping in cement concrete 1:2:4 type B-1 and providing MS cover in replacement made out of MS sheet 3 mm thick duly welded to MS angle iron frame 35x35x5mm including frame work as per existing size with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.(a) M&L for brick work using sub class 'B' (old size bricks) in CM 1:4 (b) M&L for rendering 15 mm thick in CM 1:4 finishing even and fair (c) M&L for PCC 1:2:4 type B-0 (using cum 12.5 mm graded stone aggregate ) as in coping (d) M&L for any type of mild steel work such as frame sheet 3 mm thick including welding (e) M&L for painting two coats of synthetic enamel paint over a coat of red oxide primer to untreated steel surface & prep of surface.

S&F in replacement MCCB 350 Amp 4 pole 36 KA 415 Volt complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement MCCB 200 Amp 4 pole 36 KA 415 Volt complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement MCCB 160 Amp 4 pole 36 KA 415 Volt complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement MCCB 250 Amp 4 pole 36 KA 415 Volt complete all as specified and as directed by Engineer-in-Charge.

Supply only Calcium based granuler disinfect suitable for treatment drinking water in 45 kg plastic drum complete all as specified and as directed by Engineer-in-Charge.